Removal of Organochlorine from Model Oil Using Mg-Modified ZSM-5 Zeolite:Dechlorination Performance,Regeneration,and Thermodynamics

Various metal-modified ZSM-5 zeolite adsorbents prepared by the impregnation method were applied to the removal of organic chlorides from model naphtha.The adsorption performance and regeneration stability were investigated by static adsorption experiments.The morphologies,structural features,and physicochemical properties of the adsorbents were characterized by X-ray diffraction,Brunauer-Emmett-Teller analysis,NH3 temperature-programmed desorption,scanning electron microscopy,transmission electron microscopy,and pyridine adsorption infrared spectroscopy.The Mg/ZSM-5 zeolite adsorbent possessed a relatively high specific surface area and good metal dispersion and exhibited the best dechlorination and regeneration performance.The characterization results revealed that introduction of the metal exerted a significant influence on the acidic properties of the catalyst surface.A decrease in the ratio of Brønsted acidic sites to Lewis acidic sites and an increase in the amount of moderately acidic sites were confirmed to be responsible for the excellent adsorption performance of the Mg-modified ZSM-5 zeolite.Furthermore,the Langmuir adsorption isotherm model was applied to study the adsorption equilibrium and thermodynamics of the Mg/ZSM-5 adsorbent under mild conditions.The results revealed that the removal of 1,2-dichloroethane by the Mg/ZSM-5 adsorbent was endothermic,spontaneous,disordered,and primarily involved physical adsorption.

Aromatization over nanosized Ga-containing ZSM-5 zeolites prepared by different methods:Effect of acidity of active Ga species on the catalytic performance

Nanosized Ga-containing ZSM-5 zeolites were prepared via isomorphous substitution and impregnation followed by characterized using various techniques. The catalytic performance of the zeolites for the aromatization of 1-hexene was investigated. The results indicate that isomorphous substitution promotes the incorporation of Ga heteroatoms into the framework along with the formation of extra-framework GaO;species（[GaO;]a） that have stronger interactions with the negative potential of the framework. In addition, based on the Py-IR results and catalytic performance, the [GaO;]aspecies with stronger Lewis acid sites produced a better synergism with moderate Br?nsted acid sites and thus improved the selectivity to aromatic compounds. However, the impregnation results in the formation of Ga;O;phase and small amounts of GaO;species that are mainly located on the external surface（[GaO;];）, which contribute to weaker Lewis acid sites due to weaker interactions with the zeolite framework. During 1-hexene aromatization, the nanosized Ga isomorphously substituted ZSM-5 zeolite samples（Gax-NZ5） exhibited better catalytic performance compared to the impregnated samples, and the highest aromatic yield（i.e.,65.4 wt%） was achieved over the Ga4.2-NZ5 sample, which contained with the highest Ga content.

Thermal and hydrothermal stabilities of the alkali-treated HZSM-5 zeolites

HZSM-5 zeolites with the micro-mesopore hierarchical porosity have been prepared by the post-synthesis of alkali-treatment, and their thermal and hydrothermal stabilities were studied using DTA, XRD, and NH3-TPD characterization techniques. Compared to the unmodified zeolite, the thermal and hydrothermal stabilities of the alkali-treated ZSM-5 zeolites were slightly deteriorated because of the introduction of mesopores caused by the desilication. Nevertheless, the alkali-treated zeolite framework could be maintained until the temperature increased to 1175 ℃.

Adsorption of Benzene and Propylene in Zeolite ZSM-5:Grand Canonical Monte Carlo Simulations

The adsorption behavior of benzene and propylene in zeolite ZSM-5 was studied by Grand Canonical Monte Carlo（GCMC） simulations. It could be found that benzene and propylene molecules showed different adsorption behavior in the zeolite cavities. The loadings of propylene were significantly larger than those of benzene at 100 kPa. From the figures of potential energy distribution, the potential energy of benzene/zeolite was more negative than that of propylene/zeolite, so benzene could be adsorbed more stably than propylene. When the temperature was in- creased from 298 to 443 K at 100 kPa, the loading ofpropylene was reduced from 99 to 82 molecules, whereas that of benzene changed little. When benzene and propylene were adsorbed in zeolite simultaneously, the competitive adsorption of them occurred; therefore, the potential energy distribution could be changed significantly. Besides, the adsorption isotherms of benzene and propylene in ZSM-5 at 298 and 443 K were simulated. The results exhibit that the different factors influenced the molecular adsorption at various temperatures and pressures, leading to the diffe- rent rules for the adsorption of benzene and propylene molecules in the zeolite. At a low pressure, the unfavorable energy of propylene/zeolite and the ＂commensurate freezing＂ phenomenon of benzene would make the loadings of itself higher than those of propylene. When pressure was higher than 5 kPa, the adsorption of benzene in ZSM-5 would nearly reach saturation.

Synthesis of ZSM-5 zeolite membranes without organic templates using a varying-concentration technique

Template-free nanosized ZSM-5 seeds with an average size of 15 nm were prepared from a synthesis solution with the composition 12Na2O∶100SiO2∶2Al2O3∶2500H2O. By the use of these seeds, thin ZSM-5 zeolite membranes were prepared on the outer surface of a porous α-alumina tube with a pore size of 2 μm in a gel system by varying-concentration synthesis with organic-free template. The first composition synthesis sol-gel was the same as seeds of molar composition and the second one was 12Na2O∶100SiO2∶2Al2O3∶5000H2O at 180 ℃ for 10 h, respectively. XRD shows that the film consists of well-crystallized ZSM-5 zeolite. SEM investigation indicats that the zeolite films on the supports are defect free and the film thickness is approximately 8 μm. The permeances for H2, N2, CH4 and CO2 are 8.94×10-7, 3.27×10-7, 3.9×10-7, 3.14×10-7 and 0.874×10-7 mol·m2·s-1·Pa-1, respectively. The ideal selectivity of membrane at room temperature for H2/CO2, H2/N2, H2/CH4 are 2.84, 2.73 and 2.29, respectively.

Synthesis and Characterization of ZSM-5/β Co-Crystalline Zeolite

ZSM-5/β co-crystalline zeolites with different content of ZSM-5 have beensynthesized by adding different amount of ZSM-5 to the synthetic system of β zeolite with NaAlO_2,silica sol as the source of aluminum and silica, respectively, and TEA^+ as the template undercontrolled condition of the synthesis. The ZSM-5/β co-crystalline zeolite was studied by XRD, SEM,BET and NH_3-TPD. The reaction activity of toluene alkylation was investigated with a mixture oftoluene-methanol as the feedstock in a pulse micro-reactor over the ZSM-5/β co-crystalline zeolite.It is found that ZSM-5/β co-crystalline zeolite has two kinds of zeolite structure including ZSM-5and β zeolite, not in the form of a physical mixture. The pore structure of ZSM-5/βco-crystalline zeolites is different from that for β zeolite, ZSM-5 and their physical mixture. Inaddition, the peaks of both high and low temperature desorption of ammonia over the ZSM-5/βco-crystalline zeolite shift 23℃ to lower temperatures and the acid amount of its strong acid is 3%more than the physical mixture. So the ZSM-5/β co-crystalline zeolite produces the highest contentof xylene, which is 10.4% higher than the physical mixture. And the ZSM-5/β co-crystalline zeolitehas better selectivity for toluene alkylation and weaker de-methylation than β zeolite, ZSM-5 andtheir physical mixture.

Effect of Alkali Treatment on the Structure and Catalytic Properties of ZSM-5 Zeolite

Catalytic properties of ZSM-5 zeolite samples pretreated with NaOH solution have been investigated. The samples are characterized by XRD, SEM, chemical analysis, and N2 adsorption. The results indicate that mesopores are created in ZSM-5 crystals under alkali treatment without change the microporous structure and acidic strength of the zeolite, but the crystallinity is greatly decreased under severe treatment. IR indicates that the concentration of silanol is greatly enriched by alkali treatment. The etherification activities of ZSM-5 zeolites are greatly increased by alkali-treatment. The noticeably improved catalytic activity of treated samples is ascribed to the formation of mesopores and greatly enriched silanol group.

Catalytic Desulfurization of n-Butyl-sulfide over HZSM-5 Zeolite in the Presence of a Hydrogen Provider

The catalytic desulfurization of a model organic sulfurous compound n-butyl-sulfide in a fixed bed microreactor is studied in the presence of catalyst and a hydrogen provider. The experimental results show that the appropriate reaction conditions are： a mixed catalyst of HZSM-5 zeolite and Co-Mo/Al2O3-TiO2, a reaction temperature of 300℃, atmosphere pressure, a feed speed of 50 mL/h and a mass hourly space velocity of 3.0 h^-1 A higher catalytic property and desulfurization efficiency of the mixed catalyst of HZSM-5 zeolite and Co-Mo/Al2O3-TiO2 is achieved. The adsorption and desulfurization efficiency of the FCC gasoline from Shenghua Refinery, which is affiliated to China University of Petroleum （East China）, is 53.0 %.

Synthesis of ZSM-5 Zeolite with Small Crystallite and its Application in Aromatiration of Propane

By optimizing the orystallization condition, a procedure for the synthesis of small crystallite zeolite ZSM-5 was developed. Compared with the larger crystallite ZSM-5. the smaller one exhibits higher catalytic performance in aromatization reaction of propane.

Pore Structure and Catalytic Performance of Steam-Dealuminated ZSM-5/Y Composite Zeolites

For investigating the effect of dealumination on the pore structure and catalytic performance, ZSM-5/Y composite zeolites synthesized in situ from NaY gel were dealuminated by steaming at different temperatures. XRD (X-ray diffraction) characterization indicates that the relative crystallinity of the composite zeolites decreases with the increase in Si/Al ratio after steaming. N2 adsorption-desorption suggests that more mesopores are formed while the BET (Brunauer, Emmett and Teller) specific surface area and the micropore specific surface area decrease as the temperature of steaming rises. Daqing heavy oil was used as feedstock to test the catalytic cracking activity of ZSM-5/Y composite zeolites. The experimental results of the catalytic cracking performance reveal that the distribution of products differs due to the different conditions of hydrothermal treatment. Further hydrothermal treatment leads to an increase in the yield of light oil, and a decrease in the yield of gas products and coke.

Preparation of Mesoporous ZSM-5 Zeolite under Double Ester Base Long Carbon Chains Organosilane Quaternary Ammonium Salt Template Agent

The pore sizes of traditional zeolites are in the range of0. 3-1. 5 nm,which strongly hinder the diffusion of large reactant and product molecules within the zeolite pores. To compensate for it,we tried to create mesopores in traditional microporous zeolites and retain all advantages of microporous zeolites. Mesoporous Zeolite Socony Mobile-Five( ZSM-5) zeolite was synthesized by a new double ester base long carbon chains organosilane quaternary ammonium salt as the soft template agent in hydrothermal method.The structure of the acquired zeolite crystals was confirmed by fieldemission scanning electron microscopy( FE-SEM), transmission electron microscopy( TEM), nitrogen adsorption-desorption measurements and X-ray diffraction( XRD),which indicated that their structure had the same characteristics as traditional ZSM-5 zeolites. Compared with traditional ZSM-5 zeolite,there were 4 nm and 15 nm mesopores in the crystal. The prepared hierarchical porous ZSM-5 zeolite was expected to be effective catalytic materials for chemical reactions involving large molecules.

EPR AND HIGH RESOLUTION SOLID-STATE NMR STUDIES ON Fe^(3+) SUBSTITUTED ZSM-5 ZEOLITE

Fe^(3+) substituted ZSM-5 zeolite was studied using EPR and ^(27)A1,^(29)Si MAS-NMR spectroscopy.The results showed that the synthe- sized sample has the typical ZSM-5 structure with Fe^(3+) ionsincorporated in tetrahedric sites in the zeolite framework and there are some para- magnetic centers in the samples.

Preparation of hierarchical ZSM-5 zeolite and its application in synthesis of tributyl citrate

First,the hierarchical ZSM-5 zeolite was prepared by hydrothermal method using mesoporous template cetyltrimethylammonium bromide(CTAB).The physical and chemical properties of the hierarchical ZSM-5 zeolite were characterized by X-ray diffraction(XRD),Fourier transform infrared spectroscopy(FT-IR)and N2 adsorption-desorption and Scanning electron microscope(SEM).Then,the as-prepared hierarchical ZSM-5 zeolite and ion exchange resin were used as catalysts to evaluate the reaction performance of the synthesis of tributyl citrate.Compared with the ion exchange resin,the as-prepared ZSM-5 has a microporous and mesoporous composite structure and a large specific surface area,so that significantly improving the catalytic performance of synthesizing tributyl citrate and increasing the esterification rate of the reaction 8.7%.

SYNTHESIS AND PROPERTIES OF A NOVEL COMPOSITE ZSM-5 ZEOLITE/VERMICULITE CATALYST

The composite ZSM—5 zeolite/vermiculite catalyst,in which tiny ZSM—5 zeolite parti- cles embedded in the vermiculite substrate,has been synthesized by hydrothermal method with vermiculite as silicon source.The catalytic behavior of resulting catalyst for xylene isomerization,propylene aromatization and toluene disproportionation is better than that of HZSM—5 zeolite.

Core-shell-structured Composite ZSM-5@MCM-41 Catalysts:Fabrication,Characterization,and Enhanced Performance in Hexane Catalytic Cracking

A series of core-shell zeolites with a ZSM-5 zeolite core and a MCM-41 shell with varying shell thicknesses were successfully fabricated via a cetyltrimethylammonium bromide(CTAB)-directed sol-gel coating method in an ultradilute solution. Extensive characterization techniques, including XRD, TEM, N_(2) adsorption-desorption, NH_(3)-TPD, and IR measurements, confirmed the successful coating of a microporous ZSM-5 core with a mesoporous MCM-41 shell layer and were further employed to explore the textural properties and acidic properties of the samples. The hexane cracking results revealed a significant enhancement in olefin yields after introducing the MCM-41 shell to ZSM-5. Interestingly, a volcanic trend in olefin yields was observed with the increase in the shell thickness. In particular, the highest olefin yield of 51.5%, exceeding that of the core catalyst by 17.1%, was achieved when the shell thickness was controlled at 40 nm.Moreover, the catalyst lifetime investigation revealed that the core-shell composite catalyst exhibited a minimal reduction in hexane conversion of merely 3.8% over a 120 h reaction period, significantly outperforming the 11.3% reduction exhibited by the core catalyst. This remarkable catalytic performance was attributed to the passivation of external acid sites and the introduction of more developed pore channels by the shell, which effectively mitigated unwanted side reactions. The successful synthesis of these core-shell structured catalysts presents a novel strategy for improving catalytic performance in hexane cracking, in addition to serving as a solid foundation for the design of industrial catalysts for light naphtha cracking.

用喷涂晶种法合成ZSM-5沸石膜及其影响因素考察

在多孔α Al2 O3 载体上 ,采用喷涂方法引入一层晶种 ,再用水热法合成出渗透量大、气体选择分离系数高的ZSM 5沸石膜 ;对影响ZSM 5沸石膜合成的主要因素进行了考察 ,并用XRD ,SEM及单组分气体渗透性能测定对所合成的沸石膜进行了表征 .结果表明 ,所合成的沸石膜是典型的ZSM 5沸石膜 ,膜表面晶粒排列有序 ,整齐地连成一致密层 ,绝大部分晶粒的取向一致 ,无较大裂缺存在 .经一次合成的沸石膜的H2 渗透率可达 2 70 μmol/(s·m2·Pa) ,H2 /C3H8理想分离系数达 14以上 .喷涂液SiO2 浓度。

金属载体上原位合成ZSM-5分子筛

以正硅酸乙酯(TEOS)和NaAlO2作为硅源和铝源,四乙基氢氧化铵(TEAOH)作为模板剂,用水热合成法在经表面处理的金属载体上原位合成了ZSM-5分子筛涂层,并采用BET、XRD、SEM等表征技术,研究了金属材料的处理方法、合成时间及次数等因素对ZSM-5分子筛涂层的结晶度、比表面积、覆盖率和涂层热牢固度的影响。结果表明,用原位合成法可以在金属载体上制得结晶度高、热牢固度好的ZSM-5涂层。

多孔陶瓷管基膜上合成ZSM-5沸石膜新方法

采用喷涂晶种法在多孔α -Al2 O3基膜上引入一晶种层后 ,再用水热法一次可合成出渗透量大、选择性高的 ZSM-5沸石膜 .XRD、SEM及气体渗透性对所合成膜的结构、形态和分离性能表征表明 :所合成的膜是典型的 ZSM-5沸石膜 ,膜表面晶粒排列有序 ,整齐地连成一致密层 ,未发现有裂缝、针孔等缺陷 .H2 的渗透率很大 ,在常温下可达 2 .70× 1 0 - 6 mol.m- 2 .Pa- 1 .s- 1 ,H2 /C3H8的分离因数达 1

含氟体系下亲水性ZSM-5沸石分子筛膜的制备及其性能

用变温热浸渍法在廉价大孔α-Al2O3的载体管上涂覆大小晶种引入平整均匀的晶种层,随后在无有机模板剂的含氟体系下通过二次水热生长法制备了亲水性ZSM-5沸石分子筛膜。实验考察了小晶种液浓度对形成晶种层及ZSM-5沸石分子筛膜形貌和性能的影响。并将制备的ZSM-5沸石分子筛膜分别用于渗透汽化异丙醇脱水和乙酸脱水体系中。结果显示,小晶种液浓度为0.2wt%时,制备的ZSM-5沸石分子筛膜在75℃下对10wt%水/异丙醇和10wt%水/乙酸混合物体系均具有优良的分离性能,其渗透通量分别为3.64 kg/(m2·h)和0.61 kg/(m2·h),分离因子分别达3204和1321。