The Formation of the Electronic Tornado is the Basis of Superconductivity

The space-time ladder theory reveals that the formation of electronic tornadoes,or the formation of electronic dissipative structures,to be precise,the enhancement of electronic Energy Qi field is the basis of superconductivity.The surrounding area of the electronic tornado is expanding,which is the basis of the Meissner effect,and the center is contracting,which is the basis of the pinning force.When the attractive force of the Energy Qi field is greater than the Coulomb repulsive force,the electrons form a Cooper pair and release dark energy into virtual space-time.When the dark energy increases to a certain extent,the virtual space-time frees the Cooper pair and forms an electron-virtual space-time wave,which fluctuates freely in the superconducting material,which is the basis for the superconducting resistance to be zero.This is similar to the principle of a hot air balloon.The virtual space-time is hot air and the electron pair is a hot air balloon device.Conductor electrons are free and easy to emit dark energy,resulting in insufficient dark energy,and it is not easy to form electron-pair virtual space-time waves,so the superconducting critical temperature is very low.This is because the emission coefficient of the conductor is too high.Insulator electrons are not easy to emit dark energy and easily form electron-pair virtual space-time waves.Therefore,the superconducting critical temperature is slightly higher because of the low emission coefficient of the insulator.The solution of the Qi-space-time wave equation,that is,the coherence coefficient,is an important factor in superconductivity.In addition,the conditions under which tornadoes form are also an important basis for superconductivity.Finally,it is emphasized that the coherence coefficient and prevention of dark energy emission are the two most important elements for preparing superconducting materials.

A BLOW-UP CRITERION FOR 3-D NON-RESISTIVE COMPRESSIBLE HEAT-CONDUCTIVE MAGNETOHYDRODYNAMIC EQUATIONS WITH INITIAL VACUUM

In this paper,we prove a blow-up criterion of strong solutions to the 3-D viscous and non-resistive magnetohydrodynamic equations for compressible heat-conducting flows with initial vacuum.This blow-up criterion depends only on the gradient of velocity and the temperature,which is similar to the one for compressible Navier-Stokes equations.

Simulation of Rock Complex Resistivity Using an Inversion Method

The complex resistivity of coal and related rocks contains abundant physical property information,which can be indirectly used to study the lithology and microstructure of these materials.These aspects are closely related to the fluids inside the considered coal rocks,such as gas,water and coalbed methane.In the present analysis,considering different lithological structures,and using the Cole-Cole model,a forward simulation method is used to study different physical parameters such as the zero-frequency resistivity,the polarizability,the relaxation time,and the frequency correlation coefficient.Moreover,using a least square technique,a complex resistivity“inversion”algorithm is written.The comparison of the initial model parameters and those obtained after inversion is used to verify the stability and accuracy of such approach.The method is finally applied to primary-structure coal considered as the experimental sample for complex resistivity measurements.

Formation of Singularity for Full Compressible Magnetohydrodynamic Equations with Zero Resistivity in Two Dimensional Bounded Domains

We are concerned with singularity formation of strong solutions to the two-dimensional(2D)full compressible magnetohydrodynamic equations with zero resistivity in a bounded domain.By energy method and critical Sobolev inequalities of logarithmic type,we show that the strong solution exists globally if the temporal integral of the maximum norm of the deformation tensor is bounded.Our result is the same as Ponce’s criterion for 3D incompressible Euler equations.In particular,it is independent of the magnetic field and temperature.Additionally,the initial vacuum states are allowed.

Corrosion Behaviour of Carbon Steel Fasteners in Neutral Chloride Solution

An experimental model for simulating the corrosion of carbon steel fasteners(bolt and nut) composed of a contact carbon steel electrode(CCSE) and an exposed bare carbon steel plate electrode(BCSE) was designed. The effect of coupling on the corrosion process of the galvanically coupled carbon steel electrode was evaluated and compared with the self-corrosion process observed independently at the exposed and contact regions. Results obtained indicated that at an equal area ratio and uncoupled conditions, the corrosion rate is accelerated in the surface directly exposed to bulk solution compared to the bolt surface in contact with the nut. A coupling current was recorded when the exposed surface(BCSE) was electrically connected with the contact surface(CCSE);with the CCSE acting as the anode thereby suppressing the corrosion process in the exposed surface. By implication, the galvanic coupling between CCSE and BCSE increased the corrosion rate of CCSE. The diff erence in oxygen supply was responsible for the coupling effect observed in the system as there was no decrease in the solution pH. Moreover, varying the cathode-to-anode area( S c/S a) ratio significantly influenced the corrosion current density as increased S c/S a ratio resulted in an accelerated galvanic corrosion process. The corroded surfaces and interfaces were analysed using stereomicroscopy and scanning electron microscopy. X-ray diff ractometry was adopted for corrosion product characterization. The results obtained showed supportive evidence of the corrosion behaviour in carbon steel fasteners.