Hydride precipitation in zirconium cladding materials can damage their integrity and durability.Service temperature and material defects have a significant effect on the dynamic growth of hydrides.In this study,we hav...Hydride precipitation in zirconium cladding materials can damage their integrity and durability.Service temperature and material defects have a significant effect on the dynamic growth of hydrides.In this study,we have developed a phasefield model based on the assumption of elastic behaviour within a specific temperature range(613 K-653 K).This model allows us to study the influence of temperature and interfacial effects on the morphology,stress,and average growth rate of zirconium hydride.The results suggest that changes in temperature and interfacial energy influence the length-to-thickness ratio and average growth rate of the hydride morphology.The ultimate determinant of hydride orientation is the loss of interfacial coherency,primarily induced by interfacial dislocation defects and quantifiable by the mismatch degree q.An escalation in interfacial coherency loss leads to a transition of hydride growth from horizontal to vertical,accompanied by the onset of redirection behaviour.Interestingly,redirection occurs at a critical mismatch level,denoted as qc,and remains unaffected by variations in temperature and interfacial energy.However,this redirection leads to an increase in the maximum stress,which may influence the direction of hydride crack propagation.This research highlights the importance of interfacial coherency and provides valuable insights into the morphology and growth kinetics of hydrides in zirconium alloys.展开更多
Zirconium hydride(ZrH_(2)) is an ideal neutron moderator material. However, radiation effect significantly changes its properties, which affect its behavior and the lifespan of the reactor. The threshold energy of dis...Zirconium hydride(ZrH_(2)) is an ideal neutron moderator material. However, radiation effect significantly changes its properties, which affect its behavior and the lifespan of the reactor. The threshold energy of displacement is an important quantity of the number of radiation defects produced, which helps us to predict the evolution of radiation defects in ZrH_(2).Molecular dynamics(MD) and ab initio molecular dynamics(AIMD) are two main methods of calculating the threshold energy of displacement. The MD simulations with empirical potentials often cannot accurately depict the transitional states that lattice atoms must surpass to reach an interstitial state. Additionally, the AIMD method is unable to perform largescale calculation, which poses a computational challenge beyond the simulation range of density functional theory. Machine learning potentials are renowned for their high accuracy and efficiency, making them an increasingly preferred choice for molecular dynamics simulations. In this work, we develop an accurate potential energy model for the ZrH_(2) system by using the deep-potential(DP) method. The DP model has a high degree of agreement with first-principles calculations for the typical defect energy and mechanical properties of the ZrH_(2) system, including the basic bulk properties, formation energy of point defects, as well as diffusion behavior of hydrogen and zirconium. By integrating the DP model with Ziegler–Biersack–Littmark(ZBL) potential, we can predict the threshold energy of displacement of zirconium and hydrogen in ε-ZrH_(2).展开更多
Two-dimensional diagnosis of laser-induced zirconium(Zr)plasma has been experimentally performed using the time-of-flight method by employing Faraday cups in addition to electric and magnetic probes.The characteristic...Two-dimensional diagnosis of laser-induced zirconium(Zr)plasma has been experimentally performed using the time-of-flight method by employing Faraday cups in addition to electric and magnetic probes.The characteristic parameters of laser-induced Zr plasma have been evaluated as a function of different laser irradiances ranging from 4.5 to 11.7 GW cm-2 at different axial positions of 1–4 cm with a fixed radial distance of 2 cm.A well-supporting correlation between the plume parameters and the laser-plasma-produced spontaneous electric and magnetic(E and B)fields was established.The measurements of the characteristic parameters and spontaneously induced fields were observed to have an increasing trend with the increasing laser irradiance.However,when increasing the spatial distance in both the axial and radial directions,the plasma parameters(electron/ion number density,temperature and kinetic energy)did not show either continuously increasing or decreasing trends due to various kinetic and dynamic processes during the spatial evolution of the plume.However,the E and B fields were observed to be always diffusing away from the target.The radial component of electron number densities remained higher than the axial number density component,whereas the axial ion number density at all laser irradiances and axial distances remained higher than the radial ion number density.The higher axial self-generated electric field(SGEF)values than radial SGEF values are correlated with the effective charge-separation mechanism of electrons and ions.The generation of a self-generated magnetic field is observed dominantly in the radial direction at increasing laser irradiance as compared to the axial one due to the deflection of fast-moving electrons and the persistence of two-electron temperature on the radial axis.展开更多
For the challenging nature of the zirconium environment analysis, this study consists to analyze the electrochemical behavior of Zirconium in both aqueous and organic media. To that end first the electrolytic media wa...For the challenging nature of the zirconium environment analysis, this study consists to analyze the electrochemical behavior of Zirconium in both aqueous and organic media. To that end first the electrolytic media was selected on the basis of the Pourbaix potential-pH diagram, which provides informations on the predominance of Zr<sup>(IV) </sup> ion and Zr in aqueous media. In aqueous media, analyzes were first carried out in acidic media then in basic media. Studies have thus revealed that the acidic environment is not favourable for the electrochemical analysis of zirconium. Voltammograms obtained in an acidic environment show no zirconium detection signal;this is due to the strong presence of H<sup>+</sup> ions in the solution. We have also observed in acidic media the phenomenon of passivation of the electrode surface. In aqueous alkaline media (pH = 13), we have drawn in reduction several Intensity-Potential curves by fixingsome technical parameterslike scanning speed, rotation speed of the electrode. The obtained voltammograms show cathodic waves, starting from -1.5 V/DHW and attributed to the reduction of Zr<sup> (IV) </sup> to Zr (0). The last phase of this study focused on the electrochemical analysis of zirconium in an organic media. In this media, several intensity-potential curves were plotted in reduction and in cyclic voltammetry with various parameters. Through several reduction analysis, the Zr<sup> (IV) </sup> was reduced to Zr (0) to the potential of -1.5 V/DHW. The electrochemical analysis of zirconium in organic media seems globally easier to achieve thanks to its large solvent window (i.e. dimethylformamide (DMF) solvent window > 6 V).展开更多
One-step separation of high-purity ethylene(C_(2)H_(4))from C_(2) hydrocarbon mixture is critical but challenging because of the very similar molecular sizes and physical properties of C_(2)H_(4),ethane(C_(2)H_(6)),an...One-step separation of high-purity ethylene(C_(2)H_(4))from C_(2) hydrocarbon mixture is critical but challenging because of the very similar molecular sizes and physical properties of C_(2)H_(4),ethane(C_(2)H_(6)),and acetylene(C_(2)H_(2)).Herein,we report a robust zirconium metal-organic framework(MOF)Zr-TCA(H3TCA=4,4',4"-tricarboxytriphenylamine)with suitable pore size(0.6 nm×0.7 nm)and pore environment for direct C_(2)H_(4) purification from C_(2)H_(4)/C_(2)H_(2)/C_(2)H_(6) gas-mixture.Computational studies indicate that the abundant oxygen atoms and non-polar phenyl rings created favorable pore environments for the preferential binding of C_(2)H_(2) and C_(2)H_(6) over C_(2)H_(4).As a result,Zr-TCA exhibits not only high C_(2)H_(6)(2.28 mmol·g^(-1))and C_(2)H_(2)(2.78 mmol·g^(-1))adsorption capacity but also excellent C_(2)H_(6)/C_(2)H_(4)(2.72)and C_(2)H_(2)/C_(2)H_(4)(5.64)selectivity,surpassing most of one-step C_(2)H_(4) purification MOF materials.Dynamic breakthrough experiments confirm that Zr-TCA can produce high-purity C_(2)H_(4)(>99.9%)from a ternary gas mixture(1/9/90 C_(2)H_(2)/C_(2)H_(6)/C_(2)H_(4))in a single step with a high C_(2)H_(4) productivity of 5.61 L·kg^(-1).展开更多
In this article,an investigation is conducted to study the precise role of zirconium nanoparticles that exist in a slime-like fluid subject to specific adjustments.Since gliding is a technique of mobility used by bact...In this article,an investigation is conducted to study the precise role of zirconium nanoparticles that exist in a slime-like fluid subject to specific adjustments.Since gliding is a technique of mobility used by bacteria that lack motility components,bacteria travel on their own strength in gliding locomotion by secreting a layer of slime on the substrate.A model of an undulating sheet over a layer of slime of a Rabinowitsch fluid is investigated as a potential model of bacteria’s gliding motility.With the aid of long wavelength approximation,the equations governing the circulation of slime underneath the cells are established and analytically solved.The effects of pseudoplasticity,dilatation and non-Newtonian parameter on the behavior of zirconium concentration,speed of microorganism(bacteria),streamline patterns,and pressure rise for non-Newtonian and Newtonian fluids are compared.The power required for propulsion is also investigated.Physical interpretation for the pertinent variables has been graphically discussed against the parameters under consideration.It is found that with the increase in the concentration of zirconium nanoparticles,the bacterial flow is accelerated and attains its maximum near the rigid substrate wall while an opposite behavior is noticed in the rest region.展开更多
Disulfide zirconium(ZrS_(2)) is a two-dimensional(2D) transition metal disulfide and has given rise to extensive attention because of its distinctive electronic structure and properties.However,mass production of high...Disulfide zirconium(ZrS_(2)) is a two-dimensional(2D) transition metal disulfide and has given rise to extensive attention because of its distinctive electronic structure and properties.However,mass production of high quality of ZrS_(2)nanosheets to realize their practical application remains a challenge.Here,we have successfully exfoliated the bulk ZrS_(2)powder with the thickness of micron into single and few-layer nanosheets through liquid-phase exfoliation in N-methylpyrrolidone(NMP) assisted via aliphatic amines as intercalators.It is found that the exfoliation yield is as high as 27.3%,which is the record value for the exfoliation of ZrS_(2)nanosheets from bulk ZrS_(2)powder,and 77.1% of ZrS_(2)nanosheets are 2-3 layers.The molecular geometric size and aliphatic amine basicity have important impact on the exfoliation.Furthermore,the ZrS_(2)nanosheets have been used as catalyst in the electrocatalytic dinitrogen reduction with the NH3yield of 57.75 μg h^(-1)mg_(cat.)^(-1),which is twice that by ZrS_(2)nanofibers reported in literature and three times that by the bulk ZrS_(2)powder.Therefore,the liquid phase exfoliation strategy reported here has great potential in mass production of ZrS_(2)nanosheets for high activity electrocatalysis.展开更多
As the first safety barrier of nuclear reactors,zirconium alloy cladding tubes have attracted extensive attention because of its good mechanical properties.The strength and ductility of zirconium alloy are of great si...As the first safety barrier of nuclear reactors,zirconium alloy cladding tubes have attracted extensive attention because of its good mechanical properties.The strength and ductility of zirconium alloy are of great significance to the service process of cladding tubes,while brittle hydrides precipitate and thus deteriorate the overall performance.Based on the cohesive finite element method,the effects of cohesive strength,interfacial characteristics,and hydrides geometric characteristics on the strength and ductility of two-phase material(zirconium alloy with hydrides)are numerically simulated.The results show that the fracture behavior is significantly affected by the cohesive strength and that the overall strength and ductility are sensitive to the cohesive strength of the zirconium alloy.Furthermore,the interface is revealed to have prominent effects on the overall fracture behavior.When the cohesive strength and fracture energy of the interface are higher than those of the hydride phase,fracture initiates in the hydrides,which is consistent with the experimental phenomena.In addition,it is found that the number density and arrangement of hydrides play important roles in the overall strength and ductility.Our simulation provides theoretical support for the performance analysis of hydrogenated zirconium alloys during nuclear reactor operation.展开更多
Catalytic hydrogenolysis of aromatic ether bonds is a highly promising strategy for upgrading lignin into small-molecule chemicals,which relies on developing innovative heterogeneous catalysts with high activity.Herei...Catalytic hydrogenolysis of aromatic ether bonds is a highly promising strategy for upgrading lignin into small-molecule chemicals,which relies on developing innovative heterogeneous catalysts with high activity.Herein,we designed porous zirconium phosphate nanosheet-supported Ru nanocatalysts(Ru/ZrPsheet)as the heterogeneous catalyst by a process combining ball milling and molten-salt(KNO_(3)).Very interestingly,the fabricated Ru/ZrPsheetshowed good catalytic performance on the transfer hydrogenolysis of various types of aromatic ether bonds contained in lignin,i.e.,4-O-5,a-O-4,β-O-4,and aryl-O-CH3,over a low Ru usage(<0.5 mol%)without using any acidic/basic additive.Detailed investigations indicated that the properties of Ru and the support were indispensable.The excellent activity of Ru/ZZrPsheetoriginated from the strong acidity and basicity of ZrPsheetand the higher electron density of metallic Ru0as well as the nanosheet structure of ZrPsheet.展开更多
In order to provide ultraviolet barrier, antifungal and antibacterial properties, nano-zinc oxide (ZnO) was added to lamellar zirconium phosphate (ZrP). The phosphate was synthesized via reaction of zirconium oxychlor...In order to provide ultraviolet barrier, antifungal and antibacterial properties, nano-zinc oxide (ZnO) was added to lamellar zirconium phosphate (ZrP). The phosphate was synthesized via reaction of zirconium oxychloride octahydrate and phosphoric acid following its chemical modification with Jeffamine and nano-ZnO. Diffractometric, morphological, thermal, structural and relaxometric evaluations were conducted. Fourier transform infrared spectroscopy (FTIR) revealed increase of the area between 4000 - 3000 cm<sup>-1</sup> due to the formation of ionic specie PO? <sup>+</sup>NH<sub>3</sub>-[C-(H)(CH<sub>3</sub>)-CH<sub>2</sub>-O-(C-(H)(CH<sub>3</sub>)-CH<sub>2</sub>-O)<sub>8</sub>-(CH<sub>2</sub>-CH<sub>2</sub>-O-CH<sub>3</sub>)] and nano-ZnO particles. Wide-angle X-ray diffraction indicated that intercalation of Jeffamine was successful. Thermogravimetry confirmed that nano-ZnO particle forced the expulsion of Jeffamine outside ZrP galleries. Scanning electron microscopy evidenced the Jeffamine intercalation and sample heterogeneity. Hydrogen molecular relaxation indicated the increase of molecular rigidity owing to the formation of ionic specie and the addition of nano-ZnO particles. It was postulated that a multifunctional and miscellaneous material constituted by as prepared ZrP, some delaminated ZrP platelets and nano-ZnO particles was achieved. The material has potential for usage as filler in polymeric composites.展开更多
In order to understand the dnve-in target in a D-D type neutron generator,it is essential to study the mechanism of the interaction between hydrogen ion beams and the hydrogenabsorbing metal film.The present research ...In order to understand the dnve-in target in a D-D type neutron generator,it is essential to study the mechanism of the interaction between hydrogen ion beams and the hydrogenabsorbing metal film.The present research concerns the nucleation of hydride within zirconium film implanted with hydrogen ions.Doses of 30 keV hydrogen ions ranging from 4.30×10^(17) to1.43×10^(18) ions cm^(-2) were loaded into the zirconium film through the ion beam implantation technique.Features of the surface morphology and transformation of phase structures were investigated with scanning electron microscopy,atomic force microscopy and x-ray diffraction.Confirmation of the formation of 5 phase zirconium hydride in the implanted samples was first made by x-ray diffraction,and the different stages in the gradual nucleation and growth of zirconium hydride were then observed by atomic force microscope and scanning electron microscopy.展开更多
The electrochemical reduction of Zr^4+(complex) ions in NaCl-KCl-K2ZrF6 molten salt on Pt electrode was investigated using cyclic voltammetry and square wave voltammetry at 1023 K.Two cathodic reduction peaks relat...The electrochemical reduction of Zr^4+(complex) ions in NaCl-KCl-K2ZrF6 molten salt on Pt electrode was investigated using cyclic voltammetry and square wave voltammetry at 1023 K.Two cathodic reduction peaks related to Zr^4+/Zr^2+ and Zr^2+/Zr steps were observed in the cyclic voltammograms.The result was also confirmed by square wave voltammetry.The diffusion coefficient of Zr^4+(complex) ions at 1023 K in NaCl-KCl-K2ZrF6 melt,measured by cyclic voltammetry,is about 4.22×10^-6 cm^2/s.The characterization of the deposits obtained by potentiostatic electrolysis at different potentials was investigated by XRD,and the results were well consistent with the electrochemical reduction mechanism of Zr^4+(complex) ions.展开更多
Transparent and conducting zirconium-doped zinc oxide films with high transparency and relatively low resistivity have been successfully prepared by radio frequency (RF) msgnetron sputtering at room temperature, The...Transparent and conducting zirconium-doped zinc oxide films with high transparency and relatively low resistivity have been successfully prepared by radio frequency (RF) msgnetron sputtering at room temperature, The RF power is varied from 75 to 150 W. At first the crystallinity and conductivity of the film are improved and then both of them show deterioration with the increase of the RF power, The lowest resistivity achieved is 2.07 × 10^-3Ωcm at an RF power of 100W with a Hall mobility of 16cm^2V^-1s^-1 and a carrier concentration of 1.95 × 10^20 cm^-3. The films obtained are polycryetalline with a hexagonal structure and a preferred orientation along the c-axis, All the films have a high transmittance of approximately 92% in the visible range. The optical band gap is about 3.33 eV for the films deposited at different RF powers.展开更多
Esterification of acrylic acid(AA) to produce AA esters has widespread application in the chemical industry. A series of water tolerant solid acid catalysts was prepared, and characterized by XRD, nitrogen adsorptio...Esterification of acrylic acid(AA) to produce AA esters has widespread application in the chemical industry. A series of water tolerant solid acid catalysts was prepared, and characterized by XRD, nitrogen adsorption, TGA-DTA, XPS, and ammonia adsorption FTIR. The effects of Si/Al ratio, zirconium sulfate(ZS) loading on HZSM-5 and calcination temperature on the esterification were investigated. When 20% (mass fraction) ZS is loaded on HZSM-5, the conversion of AA reaches 100%. XRD analysis indicates that ZS is highly dispersed on HZSM-5 because no crystalline structure assigned to ZS is found. Catalytic activity and hydrophobicity of ZS supported on HZSM-5 are higher compared with those of parent ZS or HZSM-5. Results show that this kind of novel catalysts is an efficient water tolerant solid acid catalyst for esterification reactions.展开更多
High quality nano-sized zirconium carbide (ZrC) powders were successfully fabricated via a developed chemical active dilution self-propagating high-temperature synthesis (SHS) method assisted by ball milling pretr...High quality nano-sized zirconium carbide (ZrC) powders were successfully fabricated via a developed chemical active dilution self-propagating high-temperature synthesis (SHS) method assisted by ball milling pretreatment process using traditional cheap zirconium dioxide powder (ZrO2), magnesium powder (Mg) and sucrose (C12H22Oll) as raw materials. FSEM, TEM, HRTEM, SAED, XRD, FTIR and Raman, ICP- AES, laser particle size analyzer, oxygen and nitrogen analyzer, carbon/sulfur determinator and TG-DSC were employed for the characterization of the morphology, structure, chemical composition and thermal stability of the as-synthesized ZrC samples. The as-synthesized samples demonstrated high purity, low oxygen content and evenly distributed ZrC nano-powders with an average particle size of 50nm. In addition, the effects of endothermic rate and the possible chemical reaction mechanism were also discussed.展开更多
The effect of melt over-heating on the morphology of Al_9FeNi phase in 2618aluminum alloy with high contents of Fe and Ni and 0.22 wt. percent zirconium has been investigatedby optical microscopy. SEM and TEM. The mec...The effect of melt over-heating on the morphology of Al_9FeNi phase in 2618aluminum alloy with high contents of Fe and Ni and 0.22 wt. percent zirconium has been investigatedby optical microscopy. SEM and TEM. The mechanical properties of 2618 aluminum alloy after hotextrusion and quenching/aging have been tested. The results show: melt over-heating treatment of2618 alloy with high contents of Fe and Ni at 960 deg C led to finer and better-distributedneedle-like Al_9FeNi phase in cast microstructure and fine Al_9FeNi particles after hot extrusion;the grain size of the alloy after hot extrusion could also be refined evidently by alloying ofzirconium; the ambient and high temperature tensile strength and elongation of 2618 alloy have beenapparently enhanced due to fine Al_9FeNi particles and dispersed Al_3Zr as well as fine grain size.展开更多
Co/SiO2 and zirconium promoted Co/Zr/SiO2 catalysts were prepared using dielectric-barrier discharge (DBD) plasma instead of the conventional thermal calcination method. Fischer-Tropseh Synthesis (FTS) performance...Co/SiO2 and zirconium promoted Co/Zr/SiO2 catalysts were prepared using dielectric-barrier discharge (DBD) plasma instead of the conventional thermal calcination method. Fischer-Tropseh Synthesis (FTS) performances of the catalyst were evaluated in a fixed bed reactor. The results indicated that the catalyst treated by DBD plasma shows the higher FTS activity and yield of heavy hydrocarbons as compared with that treated by the conventional thermal calcination method. Increase in CO conversion was unnoticeable on the Co/SiO2 catalyst, but significant on the Co/Zr/SiO2 catalyst, both prepared by DBD plasma. On the other hand, heavy hydrocarbon selectivity and chain growth probability (a value) were enhanced on all the catalysts prepared by the DBD plasma. In order to study the effect of the DBD plasma treatment on the FTS performance, the catalysts were characterized by N2-physisorption, H2-temperature programed reduction (H2-TPR), H2-temperature- programmed desorption (H2-TPD) and oxygen titration, transmission electron microscope (TEM) and X-ray diffraction (XRD). It was proved that, compared with the traditional calcination method, DBD plasma not only could shorten the precursor decomposition time, but also could achieve better cobalt dispersion, smaller Co304 cluster size and more uniform cobalt distribution. However, cobalt reducibility was hindered to some extent in the Co/SiO2 catalyst prepared by DBD plasma, while the zirconium additive prevented significantly the decrease in cobalt reducibility and increased cobalt dispersion as well as the FTS performance.展开更多
Dynamic compression tests were carried out to investigate dynamic mechanical behavior and adiabatic shear bands in ultrafine grained(UFG)pure zirconium prepared by equal channel angular pressing(ECAP)and rotary swayin...Dynamic compression tests were carried out to investigate dynamic mechanical behavior and adiabatic shear bands in ultrafine grained(UFG)pure zirconium prepared by equal channel angular pressing(ECAP)and rotary swaying.The cylindrical specimens were deformed dynamically on the split Hopkinson pressure bar(SHPB)at different strain rates of 800 to 4000s^-1 at room temperature.The temperature distribution of the shear bands was estimated on the basis of temperature rise of uniform plastic deformation stage and thermal diffusion effect.The results show that the true stress-true strain curves of UFG pure zirconium are concave upward trend of strain in range of 0.02-0.16 due to the effects of strain hardening,strain rate hardening and thermal softening.The formation of the adiabatic shear bands is the main reason of UFG pure zirconium failure.A large number of micro-voids are observed in the adiabatic shear bands,and the macroscopic cracks develop from the micro-voids coalescence.The fracture surface of UFG pure zirconium exhibits quasi cleavage fracture with the characteristic features of shear dimples and river pattern.The highest temperature within the shear bands of UFG pure zirconium is about 592 K.展开更多
Zirconium monohydride bonded to the framework oxygen of MCM-41 surface was prepared by the reaction of tetraneopentyl zirconium with MCM-41 surface hydroxyl groups, followed by the hydrogenolysis of the resulted produ...Zirconium monohydride bonded to the framework oxygen of MCM-41 surface was prepared by the reaction of tetraneopentyl zirconium with MCM-41 surface hydroxyl groups, followed by the hydrogenolysis of the resulted product. The surface hydride was characterized by using infrared spectroscopy, solid-state NMR, elemental analysis, gas-phase chromatography and chemical probing reaction. It was shown that this surface species is stable below 150 ’C and can catalytically crack alkanes into methane and ethane at 100 .展开更多
基金Project supported by the National Natural Science Foundation of China (Grant Nos.U2230401,U1930401,and 12004048)the National Key Research and Development Program of China (Grant No.2021YFB3501503)+1 种基金the Science Challenge Project (Grant No.TZ2018002)the Foundation of LCP。
文摘Hydride precipitation in zirconium cladding materials can damage their integrity and durability.Service temperature and material defects have a significant effect on the dynamic growth of hydrides.In this study,we have developed a phasefield model based on the assumption of elastic behaviour within a specific temperature range(613 K-653 K).This model allows us to study the influence of temperature and interfacial effects on the morphology,stress,and average growth rate of zirconium hydride.The results suggest that changes in temperature and interfacial energy influence the length-to-thickness ratio and average growth rate of the hydride morphology.The ultimate determinant of hydride orientation is the loss of interfacial coherency,primarily induced by interfacial dislocation defects and quantifiable by the mismatch degree q.An escalation in interfacial coherency loss leads to a transition of hydride growth from horizontal to vertical,accompanied by the onset of redirection behaviour.Interestingly,redirection occurs at a critical mismatch level,denoted as qc,and remains unaffected by variations in temperature and interfacial energy.However,this redirection leads to an increase in the maximum stress,which may influence the direction of hydride crack propagation.This research highlights the importance of interfacial coherency and provides valuable insights into the morphology and growth kinetics of hydrides in zirconium alloys.
基金Project supported by the Joint Fund of the National Natural Science Foundation of China–“Ye Qisun”Science Fund(Grant No.U2341251)。
文摘Zirconium hydride(ZrH_(2)) is an ideal neutron moderator material. However, radiation effect significantly changes its properties, which affect its behavior and the lifespan of the reactor. The threshold energy of displacement is an important quantity of the number of radiation defects produced, which helps us to predict the evolution of radiation defects in ZrH_(2).Molecular dynamics(MD) and ab initio molecular dynamics(AIMD) are two main methods of calculating the threshold energy of displacement. The MD simulations with empirical potentials often cannot accurately depict the transitional states that lattice atoms must surpass to reach an interstitial state. Additionally, the AIMD method is unable to perform largescale calculation, which poses a computational challenge beyond the simulation range of density functional theory. Machine learning potentials are renowned for their high accuracy and efficiency, making them an increasingly preferred choice for molecular dynamics simulations. In this work, we develop an accurate potential energy model for the ZrH_(2) system by using the deep-potential(DP) method. The DP model has a high degree of agreement with first-principles calculations for the typical defect energy and mechanical properties of the ZrH_(2) system, including the basic bulk properties, formation energy of point defects, as well as diffusion behavior of hydrogen and zirconium. By integrating the DP model with Ziegler–Biersack–Littmark(ZBL) potential, we can predict the threshold energy of displacement of zirconium and hydrogen in ε-ZrH_(2).
文摘Two-dimensional diagnosis of laser-induced zirconium(Zr)plasma has been experimentally performed using the time-of-flight method by employing Faraday cups in addition to electric and magnetic probes.The characteristic parameters of laser-induced Zr plasma have been evaluated as a function of different laser irradiances ranging from 4.5 to 11.7 GW cm-2 at different axial positions of 1–4 cm with a fixed radial distance of 2 cm.A well-supporting correlation between the plume parameters and the laser-plasma-produced spontaneous electric and magnetic(E and B)fields was established.The measurements of the characteristic parameters and spontaneously induced fields were observed to have an increasing trend with the increasing laser irradiance.However,when increasing the spatial distance in both the axial and radial directions,the plasma parameters(electron/ion number density,temperature and kinetic energy)did not show either continuously increasing or decreasing trends due to various kinetic and dynamic processes during the spatial evolution of the plume.However,the E and B fields were observed to be always diffusing away from the target.The radial component of electron number densities remained higher than the axial number density component,whereas the axial ion number density at all laser irradiances and axial distances remained higher than the radial ion number density.The higher axial self-generated electric field(SGEF)values than radial SGEF values are correlated with the effective charge-separation mechanism of electrons and ions.The generation of a self-generated magnetic field is observed dominantly in the radial direction at increasing laser irradiance as compared to the axial one due to the deflection of fast-moving electrons and the persistence of two-electron temperature on the radial axis.
文摘For the challenging nature of the zirconium environment analysis, this study consists to analyze the electrochemical behavior of Zirconium in both aqueous and organic media. To that end first the electrolytic media was selected on the basis of the Pourbaix potential-pH diagram, which provides informations on the predominance of Zr<sup>(IV) </sup> ion and Zr in aqueous media. In aqueous media, analyzes were first carried out in acidic media then in basic media. Studies have thus revealed that the acidic environment is not favourable for the electrochemical analysis of zirconium. Voltammograms obtained in an acidic environment show no zirconium detection signal;this is due to the strong presence of H<sup>+</sup> ions in the solution. We have also observed in acidic media the phenomenon of passivation of the electrode surface. In aqueous alkaline media (pH = 13), we have drawn in reduction several Intensity-Potential curves by fixingsome technical parameterslike scanning speed, rotation speed of the electrode. The obtained voltammograms show cathodic waves, starting from -1.5 V/DHW and attributed to the reduction of Zr<sup> (IV) </sup> to Zr (0). The last phase of this study focused on the electrochemical analysis of zirconium in an organic media. In this media, several intensity-potential curves were plotted in reduction and in cyclic voltammetry with various parameters. Through several reduction analysis, the Zr<sup> (IV) </sup> was reduced to Zr (0) to the potential of -1.5 V/DHW. The electrochemical analysis of zirconium in organic media seems globally easier to achieve thanks to its large solvent window (i.e. dimethylformamide (DMF) solvent window > 6 V).
基金supported by the National Natural Science Foundation of China(21908090,22008099,22108243,and 22168023)Natural Science Foundation of Jiangxi Province(20224ACB204003).
文摘One-step separation of high-purity ethylene(C_(2)H_(4))from C_(2) hydrocarbon mixture is critical but challenging because of the very similar molecular sizes and physical properties of C_(2)H_(4),ethane(C_(2)H_(6)),and acetylene(C_(2)H_(2)).Herein,we report a robust zirconium metal-organic framework(MOF)Zr-TCA(H3TCA=4,4',4"-tricarboxytriphenylamine)with suitable pore size(0.6 nm×0.7 nm)and pore environment for direct C_(2)H_(4) purification from C_(2)H_(4)/C_(2)H_(2)/C_(2)H_(6) gas-mixture.Computational studies indicate that the abundant oxygen atoms and non-polar phenyl rings created favorable pore environments for the preferential binding of C_(2)H_(2) and C_(2)H_(6) over C_(2)H_(4).As a result,Zr-TCA exhibits not only high C_(2)H_(6)(2.28 mmol·g^(-1))and C_(2)H_(2)(2.78 mmol·g^(-1))adsorption capacity but also excellent C_(2)H_(6)/C_(2)H_(4)(2.72)and C_(2)H_(2)/C_(2)H_(4)(5.64)selectivity,surpassing most of one-step C_(2)H_(4) purification MOF materials.Dynamic breakthrough experiments confirm that Zr-TCA can produce high-purity C_(2)H_(4)(>99.9%)from a ternary gas mixture(1/9/90 C_(2)H_(2)/C_(2)H_(6)/C_(2)H_(4))in a single step with a high C_(2)H_(4) productivity of 5.61 L·kg^(-1).
基金Fundación Mujeres poráfrica for supporting this work through the fellowship awarded to her in 2020。
文摘In this article,an investigation is conducted to study the precise role of zirconium nanoparticles that exist in a slime-like fluid subject to specific adjustments.Since gliding is a technique of mobility used by bacteria that lack motility components,bacteria travel on their own strength in gliding locomotion by secreting a layer of slime on the substrate.A model of an undulating sheet over a layer of slime of a Rabinowitsch fluid is investigated as a potential model of bacteria’s gliding motility.With the aid of long wavelength approximation,the equations governing the circulation of slime underneath the cells are established and analytically solved.The effects of pseudoplasticity,dilatation and non-Newtonian parameter on the behavior of zirconium concentration,speed of microorganism(bacteria),streamline patterns,and pressure rise for non-Newtonian and Newtonian fluids are compared.The power required for propulsion is also investigated.Physical interpretation for the pertinent variables has been graphically discussed against the parameters under consideration.It is found that with the increase in the concentration of zirconium nanoparticles,the bacterial flow is accelerated and attains its maximum near the rigid substrate wall while an opposite behavior is noticed in the rest region.
基金the financial supports from the National Natural Science Foundation of China (No.U1704251 and 21733011)the National Key Research and Development Program of China (2017YFA0403101)+1 种基金Natural Science Foundation of Henan province (No.202300410220)the 111 Project (No.D17007)。
文摘Disulfide zirconium(ZrS_(2)) is a two-dimensional(2D) transition metal disulfide and has given rise to extensive attention because of its distinctive electronic structure and properties.However,mass production of high quality of ZrS_(2)nanosheets to realize their practical application remains a challenge.Here,we have successfully exfoliated the bulk ZrS_(2)powder with the thickness of micron into single and few-layer nanosheets through liquid-phase exfoliation in N-methylpyrrolidone(NMP) assisted via aliphatic amines as intercalators.It is found that the exfoliation yield is as high as 27.3%,which is the record value for the exfoliation of ZrS_(2)nanosheets from bulk ZrS_(2)powder,and 77.1% of ZrS_(2)nanosheets are 2-3 layers.The molecular geometric size and aliphatic amine basicity have important impact on the exfoliation.Furthermore,the ZrS_(2)nanosheets have been used as catalyst in the electrocatalytic dinitrogen reduction with the NH3yield of 57.75 μg h^(-1)mg_(cat.)^(-1),which is twice that by ZrS_(2)nanofibers reported in literature and three times that by the bulk ZrS_(2)powder.Therefore,the liquid phase exfoliation strategy reported here has great potential in mass production of ZrS_(2)nanosheets for high activity electrocatalysis.
基金Supported by National Key Research and Development Plan of China(Grant No.2018YFC0808800)National Natural Science Foundation of China(Grant No.51875398)China Postdoctoral Science Foundation(Grant No.2021M693240).
文摘As the first safety barrier of nuclear reactors,zirconium alloy cladding tubes have attracted extensive attention because of its good mechanical properties.The strength and ductility of zirconium alloy are of great significance to the service process of cladding tubes,while brittle hydrides precipitate and thus deteriorate the overall performance.Based on the cohesive finite element method,the effects of cohesive strength,interfacial characteristics,and hydrides geometric characteristics on the strength and ductility of two-phase material(zirconium alloy with hydrides)are numerically simulated.The results show that the fracture behavior is significantly affected by the cohesive strength and that the overall strength and ductility are sensitive to the cohesive strength of the zirconium alloy.Furthermore,the interface is revealed to have prominent effects on the overall fracture behavior.When the cohesive strength and fracture energy of the interface are higher than those of the hydride phase,fracture initiates in the hydrides,which is consistent with the experimental phenomena.In addition,it is found that the number density and arrangement of hydrides play important roles in the overall strength and ductility.Our simulation provides theoretical support for the performance analysis of hydrogenated zirconium alloys during nuclear reactor operation.
基金financially supported by the National Natural Science Foundation of China(22072157,22293012,22179132,22121002)。
文摘Catalytic hydrogenolysis of aromatic ether bonds is a highly promising strategy for upgrading lignin into small-molecule chemicals,which relies on developing innovative heterogeneous catalysts with high activity.Herein,we designed porous zirconium phosphate nanosheet-supported Ru nanocatalysts(Ru/ZrPsheet)as the heterogeneous catalyst by a process combining ball milling and molten-salt(KNO_(3)).Very interestingly,the fabricated Ru/ZrPsheetshowed good catalytic performance on the transfer hydrogenolysis of various types of aromatic ether bonds contained in lignin,i.e.,4-O-5,a-O-4,β-O-4,and aryl-O-CH3,over a low Ru usage(<0.5 mol%)without using any acidic/basic additive.Detailed investigations indicated that the properties of Ru and the support were indispensable.The excellent activity of Ru/ZZrPsheetoriginated from the strong acidity and basicity of ZrPsheetand the higher electron density of metallic Ru0as well as the nanosheet structure of ZrPsheet.
文摘In order to provide ultraviolet barrier, antifungal and antibacterial properties, nano-zinc oxide (ZnO) was added to lamellar zirconium phosphate (ZrP). The phosphate was synthesized via reaction of zirconium oxychloride octahydrate and phosphoric acid following its chemical modification with Jeffamine and nano-ZnO. Diffractometric, morphological, thermal, structural and relaxometric evaluations were conducted. Fourier transform infrared spectroscopy (FTIR) revealed increase of the area between 4000 - 3000 cm<sup>-1</sup> due to the formation of ionic specie PO? <sup>+</sup>NH<sub>3</sub>-[C-(H)(CH<sub>3</sub>)-CH<sub>2</sub>-O-(C-(H)(CH<sub>3</sub>)-CH<sub>2</sub>-O)<sub>8</sub>-(CH<sub>2</sub>-CH<sub>2</sub>-O-CH<sub>3</sub>)] and nano-ZnO particles. Wide-angle X-ray diffraction indicated that intercalation of Jeffamine was successful. Thermogravimetry confirmed that nano-ZnO particle forced the expulsion of Jeffamine outside ZrP galleries. Scanning electron microscopy evidenced the Jeffamine intercalation and sample heterogeneity. Hydrogen molecular relaxation indicated the increase of molecular rigidity owing to the formation of ionic specie and the addition of nano-ZnO particles. It was postulated that a multifunctional and miscellaneous material constituted by as prepared ZrP, some delaminated ZrP platelets and nano-ZnO particles was achieved. The material has potential for usage as filler in polymeric composites.
基金Financial support from National Natural Science Foundation of China(nos 11205136 and 11505145)the Research Fund for Doctoral Program of Southwest University of Science and Technology(no.l4zx7166)
文摘In order to understand the dnve-in target in a D-D type neutron generator,it is essential to study the mechanism of the interaction between hydrogen ion beams and the hydrogenabsorbing metal film.The present research concerns the nucleation of hydride within zirconium film implanted with hydrogen ions.Doses of 30 keV hydrogen ions ranging from 4.30×10^(17) to1.43×10^(18) ions cm^(-2) were loaded into the zirconium film through the ion beam implantation technique.Features of the surface morphology and transformation of phase structures were investigated with scanning electron microscopy,atomic force microscopy and x-ray diffraction.Confirmation of the formation of 5 phase zirconium hydride in the implanted samples was first made by x-ray diffraction,and the different stages in the gradual nucleation and growth of zirconium hydride were then observed by atomic force microscope and scanning electron microscopy.
文摘The electrochemical reduction of Zr^4+(complex) ions in NaCl-KCl-K2ZrF6 molten salt on Pt electrode was investigated using cyclic voltammetry and square wave voltammetry at 1023 K.Two cathodic reduction peaks related to Zr^4+/Zr^2+ and Zr^2+/Zr steps were observed in the cyclic voltammograms.The result was also confirmed by square wave voltammetry.The diffusion coefficient of Zr^4+(complex) ions at 1023 K in NaCl-KCl-K2ZrF6 melt,measured by cyclic voltammetry,is about 4.22×10^-6 cm^2/s.The characterization of the deposits obtained by potentiostatic electrolysis at different potentials was investigated by XRD,and the results were well consistent with the electrochemical reduction mechanism of Zr^4+(complex) ions.
基金Project supported by the National Key Basic Research and Development Programme of China (Grant No 2001CB610504) and the National Natural Science Foundation of China (Grant Nos 60576039 and 10374060).Acknowledgments We thank Dr Wang Zhuo and Dr Yang ChangHong for their assistance in the experiment.
文摘Transparent and conducting zirconium-doped zinc oxide films with high transparency and relatively low resistivity have been successfully prepared by radio frequency (RF) msgnetron sputtering at room temperature, The RF power is varied from 75 to 150 W. At first the crystallinity and conductivity of the film are improved and then both of them show deterioration with the increase of the RF power, The lowest resistivity achieved is 2.07 × 10^-3Ωcm at an RF power of 100W with a Hall mobility of 16cm^2V^-1s^-1 and a carrier concentration of 1.95 × 10^20 cm^-3. The films obtained are polycryetalline with a hexagonal structure and a preferred orientation along the c-axis, All the films have a high transmittance of approximately 92% in the visible range. The optical band gap is about 3.33 eV for the films deposited at different RF powers.
基金Supported by the Research Fund for the Doctoral Program of Higher Education(No20050010014)the China Petroleum &Chemical Corporation ( No X503015 )the Key Discipline Construction Foundation of Beijing Education Committee ( NoXK100100643)
文摘Esterification of acrylic acid(AA) to produce AA esters has widespread application in the chemical industry. A series of water tolerant solid acid catalysts was prepared, and characterized by XRD, nitrogen adsorption, TGA-DTA, XPS, and ammonia adsorption FTIR. The effects of Si/Al ratio, zirconium sulfate(ZS) loading on HZSM-5 and calcination temperature on the esterification were investigated. When 20% (mass fraction) ZS is loaded on HZSM-5, the conversion of AA reaches 100%. XRD analysis indicates that ZS is highly dispersed on HZSM-5 because no crystalline structure assigned to ZS is found. Catalytic activity and hydrophobicity of ZS supported on HZSM-5 are higher compared with those of parent ZS or HZSM-5. Results show that this kind of novel catalysts is an efficient water tolerant solid acid catalyst for esterification reactions.
基金Funded by the Program for New Century Excellent Talents in University(No.NCET-12-0655)the Guangxi Natural Science Foundation(No.2014GXNSFFA118004)the Self-determined and Innovative Research Funds of WUT(Nos.136643002 and No.2013IV058)
文摘High quality nano-sized zirconium carbide (ZrC) powders were successfully fabricated via a developed chemical active dilution self-propagating high-temperature synthesis (SHS) method assisted by ball milling pretreatment process using traditional cheap zirconium dioxide powder (ZrO2), magnesium powder (Mg) and sucrose (C12H22Oll) as raw materials. FSEM, TEM, HRTEM, SAED, XRD, FTIR and Raman, ICP- AES, laser particle size analyzer, oxygen and nitrogen analyzer, carbon/sulfur determinator and TG-DSC were employed for the characterization of the morphology, structure, chemical composition and thermal stability of the as-synthesized ZrC samples. The as-synthesized samples demonstrated high purity, low oxygen content and evenly distributed ZrC nano-powders with an average particle size of 50nm. In addition, the effects of endothermic rate and the possible chemical reaction mechanism were also discussed.
基金The present study was supported by the National Key Basic Research and Development Programme of China (Project No. G1999064909).
文摘The effect of melt over-heating on the morphology of Al_9FeNi phase in 2618aluminum alloy with high contents of Fe and Ni and 0.22 wt. percent zirconium has been investigatedby optical microscopy. SEM and TEM. The mechanical properties of 2618 aluminum alloy after hotextrusion and quenching/aging have been tested. The results show: melt over-heating treatment of2618 alloy with high contents of Fe and Ni at 960 deg C led to finer and better-distributedneedle-like Al_9FeNi phase in cast microstructure and fine Al_9FeNi particles after hot extrusion;the grain size of the alloy after hot extrusion could also be refined evidently by alloying ofzirconium; the ambient and high temperature tensile strength and elongation of 2618 alloy have beenapparently enhanced due to fine Al_9FeNi particles and dispersed Al_3Zr as well as fine grain size.
基金supported by the National Natural Science Foundation of China(No.21076151)
文摘Co/SiO2 and zirconium promoted Co/Zr/SiO2 catalysts were prepared using dielectric-barrier discharge (DBD) plasma instead of the conventional thermal calcination method. Fischer-Tropseh Synthesis (FTS) performances of the catalyst were evaluated in a fixed bed reactor. The results indicated that the catalyst treated by DBD plasma shows the higher FTS activity and yield of heavy hydrocarbons as compared with that treated by the conventional thermal calcination method. Increase in CO conversion was unnoticeable on the Co/SiO2 catalyst, but significant on the Co/Zr/SiO2 catalyst, both prepared by DBD plasma. On the other hand, heavy hydrocarbon selectivity and chain growth probability (a value) were enhanced on all the catalysts prepared by the DBD plasma. In order to study the effect of the DBD plasma treatment on the FTS performance, the catalysts were characterized by N2-physisorption, H2-temperature programed reduction (H2-TPR), H2-temperature- programmed desorption (H2-TPD) and oxygen titration, transmission electron microscope (TEM) and X-ray diffraction (XRD). It was proved that, compared with the traditional calcination method, DBD plasma not only could shorten the precursor decomposition time, but also could achieve better cobalt dispersion, smaller Co304 cluster size and more uniform cobalt distribution. However, cobalt reducibility was hindered to some extent in the Co/SiO2 catalyst prepared by DBD plasma, while the zirconium additive prevented significantly the decrease in cobalt reducibility and increased cobalt dispersion as well as the FTS performance.
基金Funded by National Natural Science Foundation of China(No.51474170)Natural Science Foundation of Shaanxi Province(No.2016JQ5026)Foundation of Liaoning Province Educational Committee(No.2017LNQN14).
文摘Dynamic compression tests were carried out to investigate dynamic mechanical behavior and adiabatic shear bands in ultrafine grained(UFG)pure zirconium prepared by equal channel angular pressing(ECAP)and rotary swaying.The cylindrical specimens were deformed dynamically on the split Hopkinson pressure bar(SHPB)at different strain rates of 800 to 4000s^-1 at room temperature.The temperature distribution of the shear bands was estimated on the basis of temperature rise of uniform plastic deformation stage and thermal diffusion effect.The results show that the true stress-true strain curves of UFG pure zirconium are concave upward trend of strain in range of 0.02-0.16 due to the effects of strain hardening,strain rate hardening and thermal softening.The formation of the adiabatic shear bands is the main reason of UFG pure zirconium failure.A large number of micro-voids are observed in the adiabatic shear bands,and the macroscopic cracks develop from the micro-voids coalescence.The fracture surface of UFG pure zirconium exhibits quasi cleavage fracture with the characteristic features of shear dimples and river pattern.The highest temperature within the shear bands of UFG pure zirconium is about 592 K.
文摘Zirconium monohydride bonded to the framework oxygen of MCM-41 surface was prepared by the reaction of tetraneopentyl zirconium with MCM-41 surface hydroxyl groups, followed by the hydrogenolysis of the resulted product. The surface hydride was characterized by using infrared spectroscopy, solid-state NMR, elemental analysis, gas-phase chromatography and chemical probing reaction. It was shown that this surface species is stable below 150 ’C and can catalytically crack alkanes into methane and ethane at 100 .