Application of Short Sequential Extraction Procedure(SSEP) for the Determination of Zn, Cu, and Cd Contents in Riverbed Sludge in Hejiagou, Harbin, China

A short sequential extraction procedure（SSEP） was applied to the determination of more readily available metal fractions of Zn, Cu, and Cd in the riverbed sludge in Hejiagou, Harbin, China. From the results, a potential order of metal availability in seven sludge samples was proposed： Cd 〈 Cu 〈 Zn, and samples S1 , S2, and S4 were used for the determination of total Zn content, and sample S3 used for the determination of total Cu content in the mobile and the mobilizable fractions showed the highest pollution risk. The results with regard to metal mobility in sludge samples were confirmed by the individual and global contamination factors that were calculated from the nonresidual and residual metal contents. The results obtained from metal-release experiments after exposure of sludge to environmental conditions agreed well with those obtained from both SSEP and the individual and global contamination factors, indicating that the maximum metal release could be an additional factor to evaluate the heavy metal availability in contaminated sludge. A substantial time saving was achieved by using the metal-release method in the present study.

Effects of a mixture of Cu, Cd, Hg and Zn on marine plankton: Marine Ecosystem Enclosure Experiment

Five experiment ecosystems (MEEE) were employed in April, 1985 to test the effects of a mixture of Cu, Cd, Hg, Pb and Zn on a subtropical planktonic ecosystem in Xiamen Bay, Xiamen, China. The results indicated that the ppb-level of the mixture could suppress the planktonic production. Zooplankton in Xiamen were very sensitive to the metal contamination, especially the larvaceans.

Concentrations of Cu, Pb, Zn, Cr and Cd in Surficial Sediments from Mangrove Wetlands of China

Mangrove sediments were sampled form 14 main mangrove reserves of China. Concentrations of Cu, Pb, Zn, Cr and Cd were analyzed with a PE ICP-MS, and physical and physicochemical factors such as particle size distribution, pH, salinity and Total Organic Matter （TOM） were also determined. In the mangrove sediments of China, the average contents of heavy metals decreased in the order ofZn 〉 Pb 〉 Cu 〉 Cr 〉 Cd. The average contents of heavy metals were： Cu = 22.8 4- 16.46 mg/kg, Pb = 76.1 4- 52.33 mg/kg, Zn = 86.3 4- 42.65 mg/kg, Cr = 18.4 4- 5.83 mg/kg and Cd = 0.21 4- 0.25 mg/kg. Compared with previous studies, levels of heavy metals increased greatly. Contents of Cd, Cu, Pb and Zn were higher than the Background Values （BV）. However, the contents of Cr was under the BV. The results revealed that levels of heavy metals changes significantly with anthropogenic input, physical and physicochemical factors. Significant correlations were found between concentrations of Cu, Ph and pH, TOM.

TOXIC EFFECTS OF Zn^(2+), Cu^(2+), Cd^(2+)and NH_3 ON CfflNESE PRAWN

This study deals with the toxic effects of Zn2+, Cu2+, Cd2+ and NH3 on Chinese prawn (Penaeus orientalis). The median lethal concentrations of the toxic matters on Chinese prawn were determined. Cd2+】Cu2+】Zn2+】NH3-Nm is the toxic order of these chemicals to Chinese prawn. The toxic order of concentrated Zn2+ and Cd2+ in tissues and organs of Chinese prawn is in the order gill 】 shell + appendage】viscera 】 muscle..

CONCENTRATIONS OF Cd, Cu AND Zn IN SEDIMENTS COLLECTED FROM URBAN LAKES AT KELANA JAYA, PENINSULAR MALAYSIA

Kelana Jaya Municipal Park is a popular recreation park in Petaling Jaya. The five lakes, located within the Park, were ex-mining ponds, functioning as flood retention ponds and receiving effluents from nearby human activities mainly from residents and transportation. A study was conducted to determine the distribution and sources of heavy metals (Cd, Cu and Zn) in the sediments of Kelana Jaya Lakes. Concentrations of Cd, Cu, and Zn for surface sediment were determined by using aqua-regia method and sequential extraction technique. Total Cd concentrations ranged from 0.48 μg/g to 2.68 μg/g dry weight (dw) for all lakes. Total Cd concentrations in sediment of all lakes exceeded CCME (Canadian Council of Ministers of the Environment, 2001) guidelines. Total Cu concentrations ranged from 7.37 μg/g to 73.6 μg/g (dw). Only Cu concentration in one lake exceeded the CCME guidelines besides having the highest mean concentration among all. Total Zn concentrations ranged from 107 μg/g to 529 μg/g (dw). Again, The Zn concentrations in three lakes were found to exceed CCME guidelines for Zn concentration in freshwater sediment. Geochemical study on sediment revealed that nonresistant fractions for Cd, Cu and Zn for other lakes there were higher than ‘resistant’ fraction. The elevated levels and most percentages (>50%) of nonresistant fractions of Cu and Zn indicated that lakes in the park, especially near oxidation pond and monsoon drains, could have received anthropogenic metals from domestic wastes. Rehabilitation program and regular biomonitoring at Kelana Jaya Lakes are therefore recommended.

STUDY ON THE RELATIONSHIP BETWEEN SPECIATION OF HEAVY METALS AND THEIR ECOTOXICITY——I. TOXICITY OF Cu, Cd , Pb AND Zn IN SEAWATER TO THREE MARINE ALGAE IN THE PRESENCE OF DIFFERENT COMPLEXATION AGENTS

Heavy metal is a main pollutant in the marine ecosystem . so study on the effect of heavy metal on phytoplankton is important . Algae (Chaetoceros sp . , Dunaliella sp . ., Dicrateria zhanjiangenis Hu . var . sp .) were laboratory cultured to observe the effect of heavy metals on their growth . The effect of different metal ion concentration , the detoxication effect of complexation agents and the growth of algae in different media and different nutrition levels were studied to evaluate the effect of metal speciation . It is proved that trace amount of heavy metals can stimulate the growth of algae cells but that high concentration is lethal . The sequence of toxicity is Cd2+】Zn2+】Pb2+ . In ordinary nutrition conditions , the detoxication sequence of complexation agents to Chaetoceros sp . is EDTA 】 sodium salicylate 】 sodium oxalate 】 sodium citrate 】 sulfanilic acid 】 O-phenanthroline . This is in good conformity with the stability constant sequence of these agents with copper and good evidence that

SYNTHESIS AND CHARACTERIZATION OF THE SOLID COMPLEXES OF Mn(Ⅱ), Co(Ⅱ), Cu(Ⅱ), Zn(Ⅱ), Ag(Ⅰ), Cd(Ⅱ) NITRATES WITH DISUBSTITUTED BENZO CROWN ETHERS

Nine new solid complexes of Mn(Ⅱ),Co(Ⅱ),Cu(Ⅱ),Zn(Ⅱ.),Ag(Ⅰ) nitrates with 4',5'-dibromobenzo-15—crown—5(L_A),Ag(Ⅰ),Cd(Ⅱ)nitrates with tetrabromodibenzo—18—crown—6(L_B)and Cu(Ⅱ), Ag(Ⅰ) nitrates with 4'—bromo—5'—nitrobenzo—15—crown-5(L_c),having the compositions of M(NO_2)_2·L·nH_2O(M=Mn,Co, Zn,L=L_A,n=2;M=Cu,L=L_A,n=1.5; M=Cd, L=L_B,n=0; M=Cu,L=Lc,n=2) and AgNO_·L·nCH_3CN(L=LA,n=0; L=L_B,n=1; L=Lc,n=1/2) have been synthesized in nonaqueous solvent. All the isolated complexes have been characterized by elementary analysis, IR and UV spectra, differential thermal and thermogravimetric analysis, X—ray powder diffraction analysis, molar conductance and measuremends of solubility in some general solvents.

6种固化剂对土壤Pb Cd Cu Zn的固化效果

通过在重金属污染土壤中分别施加沸石、石灰石、硅藻土、羟基磷灰石、膨润土和海泡石6种固化剂,研究了这6种固化剂对土壤中Pb、Cd、Cu、Zn的固化效果,筛选出几种效果较好的固化剂。实验结果表明:沸石、石灰石和羟基磷灰石均能够有效地降低土壤中交换态Pb、Cd的含量,并且明显减少了土壤中Pb、Cd的毒性浸出量,其中沸石最多降低土壤中交换态Pb、Cd含量分别达到48.7%和56.2%,减少土壤中Pb、Cd的毒性浸出量达到37.1%和30.1%;沸石、石灰石均能够有效降低土壤中交换态Cu的含量,降低量分别高达68.1%和85.2%,膨润土能有效减少土壤中Cu的毒性浸出量,减少量最高达到66.51%;石灰石对土壤中Zn有着良好的固化效果。

不同品种水稻糙米对Cd Cu Zn积累特性的研究

以酸性矿山废水污染的含有多种重金属的农田土壤为供试土壤,通过盆栽实验,研究不同水稻品种,不同类型、不同遗传背景水稻糙米重金属Cd、Cu、Zn的积累差异。结果表明,供试水稻糙米Cd含量为0.006～0.092mg·kg-1,最高值和最低值相差15倍;Cu含量为6.712～27.117mg·kg-1,最高值和最低值相差4倍;Zn含量为28.390～43.296mg·kg-1,最高值和最低值相差不到1倍。常规稻和杂交稻糙米的Cd、Cu、Zn含量差异不明显。三系杂交稻的糙米Cd、Cu含量极显著高于二系杂交稻,而二系杂交稻糙米中Zn含量则显著高于三系杂交稻。不同遗传背景水稻品种糙米Cd、Cu、Zn含量也存在明显差异。相关分析结果表明,糙米中Cu、Cd含量间呈极显著正相关,Cu、Zn含量之间存在显著负相关,而Cd、Zn含量间的相关性不明显。

Crossed Micro-bands in the Martensite Variant Pairs of a Thermomechanically Trained Cu-Zn-Al Alloy

The crossed micro-bands in the martensite variant pairs of a thermomechanically trained Cu25.66Zn-4.02Al (wt-%) alloy have been studied. It was found that the micro-bands pass through the interface from one martensite variant to another and their orientation inside different variants is distinct, which would remain in the parent phase after the reverse transformation and play an important role in the formation of preferential martensite. In fact, the crossed micro-bands are micro-twins for accommodating the stress fields generated during thermomechanically training

Influence of different phosphates on adsorption and leaching of Cu and Zn in red soil

Batch and soil column experiments were conducted to evaluate the influence of KH2PO4, （NH4）H2PO4and Ca（H2PO4）2on the adsorption and leaching characteristics of Cu and Zn in red soil. The results show that all the three phosphates can greatly improve the adsorption capacity of red soil for Cu and Zn, and the effect of different phosphates on Cu and Zn adsorption follows the order of Ca（H2PO4）2〉KH2PO4〉（NH4）H2PO4. The addition of phosphate has little effect on the mobility of Cu. Ca（H2PO4）2and （NH4）H2PO4 show a strong ability in immobilizing Zn while the immobilization ability of KH2PO4 is much weaker. All the three phosphates are helpful for modifying the partitioning of Cu and Zn from the non-residual phase to the residual phase; however, they could also enhance the contents of Cu and Zn associated with exchangeable and carbonates fractions.

Effects of insoluble Zn,Cd,and EDTA on the growth,activities of antioxidant enzymes and uptake of Zn and Cd in Vetiveria zizanioides

A root-bag experiment was conducted to study the effects of insoluble Zn, Cd, and ethylenediaminetetraacetic acid （EDTA） on the plant growth, activities of antioxidant enzymes, proline, glutathione （GSH）, water-soluble proteins and malondialdehyde （MDA） of Vetiveria zizanioides. The V. zizanioides uptake capacity of Zn and Cd also determined. The results showed that plant growth of V. zizanioides was inhibited by Zn and Cd. The shoot dry weight （SDW） and root dry weight （RDW） decrease by 14.2%, 14.1%, 17.0% and 17.3%, 32.5%, 35.7%, respectively, compared to the control without EDTA addition. After adding EDTA, shoot and root dry weight decreased over 10% and 15%, respectively. The toxicity from insoluble Zn and Cd in soil on SDW and RDW of V. zizanioides was in order： Zn＋Cd 〉 Cd 〉 Zn. The activities of superoxide dismutase （SOD）, peroxidase （POD） and catalase （CAT）, and contents of MDA and proline increased significantly, while the contents of GSH and water-soluble proteins decreased markedly with increasing Zn and Cd toxicity. With EDTA, shoot and root Zn concentrations increased in the Zn treatment by 7.3% and 37.4%, and Cd concentrations in the combined Zn and Cd treatment increased by 18.6% and 391.9% compared to the treatment without EDTA. However, Zn and Cd concentrations in shoot and roots decreased in the Cd treatment compared to the plants grown in absence of EDTA, with exception of root Cd concentration in the presence of EDTA.

Microstructure evolution and thermal expansion of Cu-Zn alloy after high pressure heat treatment

The thermal expansion coefficients of Cu-Zn alloy before and after high pressure treatment were measured by thermal expansion instrument in the temperature range of 25？700 ℃,and the microstructure and phase transformation of the alloy were examined by optical microscope,X-ray diffractometer（XRD） and differential scanning calorimeter（DSC）.Based on the experimental results,the effects of high pressure treatment on the microstructure and thermal expansion of Cu-Zn alloy were investigated.The results show that the high pressure treatment can refine the grain and increase the thermal expansion coefficient of the Cu-Zn alloy,resulting in that the thermal expansion coefficient exhibits a high peak value on the α-T curve,and the peak value decreases with increasing the pressure.

Characterization and performance of Cu/ZnO/Al_2O_3 catalysts prepared via decomposition of M(Cu,Zn)-ammonia complexes under sub-atmospheric pressure for methanol synthesis from H_2 and CO_2

Methanol synthesis from hydrogenation of CO2 is investigated over Cu/ZnO/Al2O3 catalysts prepared by decomposition of M（Cu,Zn）-ammonia complexes （DMAC） at various temperatures.The catalysts were characterized in detail,including X-ray diffraction,N2 adsorption-desorption,N2O chemisorption,temperature-programmed reduction and evolved gas analyses.The influences of DMAC temperature,reaction temperature and specific Cu surface area on catalytic performance are investigated.It is considered that the aurichalcite phase in the precursor plays a key role in improving the physiochemical properties and activities of the final catalysts.The catalyst from rich-aurichalcite precursor exhibits large specific Cu surface area and high space time yield of methanol （212 g/（Lcat·h）;T=513 K,p=3MPa,SV=12000 h-1）.

Microstructure and properties of Cu/Al joints brazed with Zn-Al filler metals

The mechanical properties and microstructural distribution of the Cu/A1 brazing joints formed by torch-brazing with different Zn-A1 filler metals were investigated. The microstructure of the Zn-A1 alloys was studied by optical microscopy and scanning electron microscopy, and the phase constitution of the Cu/A1 joints was analyzed by energy dispersion spectrometry. The results show that the spreading area of the Zn-A1 filler metals on the Cu and A1 substrates increases as the A1 content increases. The mechanical results indicate that the shear strength reaches a peak value of 88 MPa when A1 and Cu are brazed with Zn-15AI filler metal. Microhardness levels from HV122 to HV515 were produced in the three brazing seam regions corresponding to various microstructure features. The Zn- and Al-rich phases exist in the middle brazing seam regions. However, two interface layers, CuZn3 and A12Cu are formed on the Cu side when the A1 content in the filler metals is 2% and more than 15%, respectively. The relationship between intermetallic compounds on Cu side and Zn-xA1 filler metals was investigated.

Effect of cold rolling deformation on microstructure evolution and mechanical properties of spray formed Al−Zn−Mg−Cu−Cr alloys

The impact of cold rolling deformation,which was introduced after solid solution and before aging treatment,on microstructure evolution and mechanical properties of the as-extruded spray formed Al−9.8Zn−2.3Mg−1.73Cu−0.13Cr(wt.%)alloy,was investigated.SEM,TEM,and EBSD were used to analyze the microstructures,and tensile tests were conducted to assess mechanical properties.The results indicate that the D1-T6 sample,subjected to 25%cold rolling deformation,exhibits finer grains(3.35μm)compared to the D0-T6 sample(grain size of 4.23μm)without cold rolling.Cold rolling refines the grains that grow in solution treatment.Due to the combined effects of finer and more dispersed precipitates,higher dislocation density and smaller grains,the yield strength and ultimate tensile strength of the D1-T6 sample can reach 663 and 737 MPa,respectively.In comparison to the as-extruded and D0-T6 samples,the yield strength of the D1-T6 sample increases by 415 and 92 MPa,respectively.

Synergistic effect of gradient Zn content and multiscale particles on the mechanical properties of Al-Zn-Mg-Cu alloys with coupling distribution of coarse-fine grains

This study investigated the influence of graded Zn content on the evolution of precipitated and iron-rich phases and grain struc-ture of the alloys,designed and developed the Al–8.0Zn–1.5Mg–1.5Cu–0.2Fe(wt%)alloy with high strength and formability.With the increase of Zn content,forming the coupling distribution of multiscale precipitates and iron-rich phases with a reasonable matching ratio and dispersion distribution characteristics is easy.This phenomenon induces the formation of cell-like structures with alternate distribu-tion of coarse and fine grains,and the average plasticity–strain ratio(characterizing the formability)of the pre-aged alloy with a high strength is up to 0.708.Results reveal the evolution and influence mechanisms of multiscale second-phase particles and the corresponding high formability mechanism of the alloys.The developed coupling control process exhibits considerable potential,revealing remarkable improvements in the room temperature formability of high-strength Al–Zn–Mg–Cu alloys.

Lead Isotopic Composition and Lead Source of the Huogeqi Cu-Pb-Zn Deposit,Inner Mongolia,China

The Huogeqi orefield located on the northern side of Mt. Langshan, Inner Mongolia occurs in the Middle Proterozoic Langshan Group metamorphic rocks, and the orebodies arc stratiform. In the past twenty years, many Chinese geologists have conducted researches on the Huogeqi Cu-Pb-Zn deposit, but there has been still a controversy on its origin. Some advocate that the deposit is of sedimentary-metamorphic rcworking origin, some hold that it is of sea-floor SEDEX origin, and others have a preference for magmatic superimposition origin. The crux of the controversy is that there is no common understanding about the source of ore-forming materials. In this paper, the Pb isotopic compositions of regional Achaean-Early Proterozoic basement rocks, various types of sedimentary- metamorphic rocks and volcanic rocks in the mining district, Late Proterozoic and Hercynian magmatic rocks arc introduced and compared with the orc-lead composition, so as to constrain the source of the ore lead. The result indicates that （1） sulfides in the ores have homogeneous Pb isotopic compositions, showing a narrow variation range. Their ^206pb/^204pb ratios arc within a range of 17.027- 17.317; ^207Pb/^204pb ratios, 15.451-15.786 and ^208Pb/^204pb ratios, 36.747-37.669; （2） the Pb isotopic compositions of the regional Achaean-Early Proterozoic basement rocks arc characteristic of the old Pb isotopic composition at the early-stage evolution of the Earth, which varies over a wider range, reflecting significant differences in Pb isotopic compositions of the ores. All this indicates that the source of ore lead has no bearing on the basement rocks; （3） the sedimentary-metamorphic rocks in the mining district arc characterized by highly variable and more radiogenic Pb isotopic compositions and their Pb isotopic ratios arc obviously higher than those of ores, demonstrating that ore lead did not result from metamorphic rcworking of these rocks; （4） Pb isotopic compositions of Late Proterozoic diorite-gabbro and Hercynian granite are higher than those of ores. Meanwhile, the Pb isotopic compositions of sulfides in the small-sized strata-penetrating mineralized veinlets formed at later stages arc completely consistent with that of sulfides in stratiform-banded ores, suggesting that these veiniets arc the product of autochthonous rcworking of the stratiform-banded ores during the period of metamorphism and the late magmatic superimposition-mineralization can be excluded; （5） amphibolite, whose protolith is basic volcanic rocks, has the same Pb isotopic compositions as ores, implying that ore lead was derived probably from basic volcanism. So, the source of ore-forming materials for the Huogeqi deposit is like that of the volcanic massive sulfide （VMS） deposits. However, the orebodies do not occur directly within the volcanic rocks, and instead they overlie the volcanic rocks, showing some differences from those typical VMS-type deposits.

Reagent optimization for on-line simultaneous polarographic determination of trace amounts of Cu^(2+), Cd^(2+) and Co^(2+) in the presence of anextremely large excess of Zn^(2+)

Reagents are optimized for the simultaneous determination of trace amounts of Cu^(2+), Cd^(2+) and Co^(2+) in zinc sulfate solution, which contains an extremely large excess of Zn^(2+). First, the reagents and their doses for the experiment are selected according to the characteristics of the zinc sulfate solution. Then, the reagent doses are optimized by analyzing the influence of reagent dose on the polarographic parameters(i.e. half-wave potential E_(1/2) and limiting diffusion current I_p). Finally, the optimization results are verified by simultaneously determining trace amounts of Cu^(2+), Cd^(2+) and Co^(2+) in the presence of an extremely large excess of Zn^(2+). The determination results indicate that the optimized reagents exhibit wide linearity, low detection limits, high accuracy and good precision for the simultaneous determination of trace amounts of Cu^(2+), Cd^(2+) and Co^(2+) in the presence of an extremely large excess of Zn^(2+).

Synthesis of Cu_2ZnSnS_4 thin film from mixed solution of Cu_2SnS_3 nanoparticles and Zn ions

The Cu2ZnSnS4 thin film was prepared by a facile solution method without vacuum environment and toxic substance. The formation mechanism of the film was studied by transmission electron microscopy (TEM), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), and Raman scattering measurements. Through cyclic voltammetry and photo-electricity tests, the electrocatalytic activity of the prepared film as the counter electrode of dye-sensitizedsolar cell was also studied. The results show that the mixed precursor solution mainly consists of Cu2SnS3 nanoparticles and Zn ions.After 550 °C annealing process on the precursor film prepared from the mixed solution, Cu2ZnSnS4 thin film is obtained. Besides, itis found that the prepared Cu2ZnSnS4 thin film has the electrocatalytic activity toward the redox reaction of I3?/I? and the dye-sensitized solar cell with the prepared Cu2ZnSnS4 thin film as the counter electrode achieves the efficiency of 1.09%.