Mg_(3)Sb_(2)has attracted intensive attention as a typical Zintl-type thermoelectric material.Despite the exceptional thermoelectric performance in n-type Mg_(3)Sb_(2),the dimensionless figure of merit(zT)of p-type Mg...Mg_(3)Sb_(2)has attracted intensive attention as a typical Zintl-type thermoelectric material.Despite the exceptional thermoelectric performance in n-type Mg_(3)Sb_(2),the dimensionless figure of merit(zT)of p-type Mg_(3)Sb_(2)remains lower than 1,which is mainly attributed to its inferior electrical properties.Herein,we synergistically optimize the thermoelectric properties of p-type Mg_(3)Sb_(2)materials via codoping of Cd and Ag,which were synthesized by high-energy ball milling combined with hot pressing.It is found that Cd doping not only increases the carrier mobility of p-type Mg_(3)Sb_(2),but also diminishes its thermal conductivity(κ_(tot)),with Mg_(2.85)Cd_(0.5)Sb_(2)achieving a lowκtot value of∼0.67 W m^(−1)K^(−1)at room temperature.Further Ag doping elevates the carrier concentration,so that the power factor is optimized over the entire temperature range.Eventually,a peak zT of∼0.75 at 773 K and an excellent average zT of∼0.41 over 300−773 K are obtained in Mg_(2.82)Ag_(0.03)Cd_(0.5)Sb_(2),which are∼240%and∼490%higher than those of pristine Mg_(3.4)Sb_(2),respectively.This study provides an effective pathway to synergistically improve the thermoelectric performance of p-type Mg_(3)Sb_(2)by codoping Cd and Ag,which is beneficial to the future applications of Mg_(3)Sb_(2)-based thermoelectric materials.展开更多
In this study, we have performed first-principles screened exchanged hybrid density function theory with the HSE06 function calculations of the C-Mo, C-W, N-Nb and N-Ta codoped anatase TiO2 systems to investigate the ...In this study, we have performed first-principles screened exchanged hybrid density function theory with the HSE06 function calculations of the C-Mo, C-W, N-Nb and N-Ta codoped anatase TiO2 systems to investigate the effect of codoping on the electronic structure of TiO2. The calculated results demonstrate that （W（s）＋C（s）） codoped TiO2 narrows the band gap significantly, and have little influence on the position of conduction band edges, therefore, enhances the efficiency of the photocatalytic hydrogen generation from water and the photodegradation of organic pollutants. Moreover, the proper oxygen pressure and temperature are two key factors during synthesis which should be carefully under control so that the desired （W（s）＋C（s）） codoped TiO2 can be obtained.展开更多
Diamond crystals were synthesized with different doping proportions of N-H-O at 5.5 GPa-7.1 GPa and 1370℃-1450℃. With the increase in the N-H-O doping ratio, the crystal growth rate decreased, the temperature and pr...Diamond crystals were synthesized with different doping proportions of N-H-O at 5.5 GPa-7.1 GPa and 1370℃-1450℃. With the increase in the N-H-O doping ratio, the crystal growth rate decreased, the temperature and pressure conditions required for diamond nucleation became increasingly stringent, and the diamond crystallization process was affected. [111] became the dominant plane of diamonds;surface morphology became block-like;and growth texture,stacking faults, and etch pits increased. The diamond crystals had a two-dimensional growth habit. Increasing the doping concentration also increased the amount of N that entered the diamond crystals as confirmed via Fourier transform infrared spectroscopy. However, crystal quality gradually deteriorated as verified by the red-shifting of Raman peak positions and the widening of the Raman full width at half maximum. With the increase in the doping ratio, the photoluminescence property of the diamond crystals also drastically changed. The intensity of the N vacancy center of the diamond crystals changed, and several Ni-related defect centers, such as the NE1 and NE3 centers, appeared. Diamond synthesis in N-H-O-bearing fluid provides important information for deepening our understanding of the growth characteristics of diamonds in complex systems and the formation mechanism of natural diamonds, which are almost always N-rich and full of various defect centers. Meanwhile, this study proved that the type of defect centers in diamond crystals could be regulated by controlling the N-H-O impurity contents of the synthesis system.展开更多
In the iron-based high-To bulk superconductors, Tc above 50 K was only observed in the electron-doped 1111-type compounds. Here we revisit the electron-doped SmFeAsO polycrystals to make a further investigation for th...In the iron-based high-To bulk superconductors, Tc above 50 K was only observed in the electron-doped 1111-type compounds. Here we revisit the electron-doped SmFeAsO polycrystals to make a further investigation for the highest Tc in these materials. To introduce more electron carriers and less crystal lattice distortions, we study the Th and F eodoping effects into the Sm-O layers with heavy electron doping. Dozens of Sm1-xThx FeAsO1-yFy samples are synthesized through the solid state reaction method, and these samples are carefully characterized by the structural, resistive, and magnetic measurements. We find that the codoping of Th and F clearly enhances the superconducting Tc more than the Th or F single-doped samples, with the highest record Tc up to 58.6K when x = 0.2 and y=0.225. Further element doping causes more impurities and lattice distortions in the samples with a weakened superconductivity.展开更多
In this work, a simple method to modulate the crystal phase and morphology with a large amount of K＋ions codoping is proposed. The phase changes to the mixture of β-Na YF4 and β-KYF4 with increasing the content of...In this work, a simple method to modulate the crystal phase and morphology with a large amount of K＋ions codoping is proposed. The phase changes to the mixture of β-Na YF4 and β-KYF4 with increasing the content of K^＋ions to 80 mol%.When it exceeds 80 mol%, β-Na YF4 disappears gradually and β-KYF4 dominates with a poor crystalline. In addition, the morphology changes from nanosphere to nanoplate, and then to nanoprism, which indicates that a higher content of K^＋ions favors the growth rates along [0001] than the [10-10] of the nanocrystals. Additionally, the upconversion（UC） luminescence properties and the ratio of red/green（R/G） UC intensity of samples with different phases and morphologies are detected,which makes it possible to tune the UC fluorescence by varying the concentration of K^＋ions.展开更多
In this paper we present a novel report on the upconversion luminescence performance of NaY0.92Yb0.05Er0.03F4 enhanced by Zr^4＋ codoping. The luminescence intensity of the tridoped hexagonal NaYF_4 synthesized by a h...In this paper we present a novel report on the upconversion luminescence performance of NaY0.92Yb0.05Er0.03F4 enhanced by Zr^4＋ codoping. The luminescence intensity of the tridoped hexagonal NaYF_4 synthesized by a hydrothermal method increased to the maximum, about seven times of the non-Zr^4＋ sample when the Zr^4＋ codoping concentration rose to 6 mol%, while the luminescence lifetime was also prolonged by Zr^4＋ codoping. To explore the relationships between the microstructure and upconversion properties, X-ray powder diffraction, field emission scanning electron microscope, electron energy-dispersive spectroscopy and upconversion emission spectroscopy were employed. From these characterizations, we found that the codoping of Zr^4＋ could modulate the crystal microstructure of NaYF_4 for higher upconversion luminescence intensity and longer lifetime. This study may be helpful for the design and synthesis of high-performance upconversion materials.展开更多
Carbon materials are effective substitutes for Pt counter electrodes(CEs) in dye-sensitized solar cells(DSSCs). However, many of these materials, such as carbon nanotubes and graphene, are expensive and require comple...Carbon materials are effective substitutes for Pt counter electrodes(CEs) in dye-sensitized solar cells(DSSCs). However, many of these materials, such as carbon nanotubes and graphene, are expensive and require complex preparation process. Herein, waste lignin, recycled from hazardous black liquors,is used to create oxygen-nitrogen-sulfur codoped carbon microspheres for use in DSSC CEs through the facile process of low-temperature preoxidation and high-temperature self-activation. The large number of ester bonds formed by preoxidation increase the degree of cross-linking of the lignin chains, leading to the formation of highly disordered carbon with ample defect sites during pyrolysis. The presence of organic O/N/S components in the waste lignin results in high O/N/S doping of the pyrolysed carbon,which increases the electrolyte ion adsorption and accelerates the electron transfer at the CE/electrolyte interface, as confirmed by density functional theory(DFT) calculations. The presence of inorganic impurities enables the construction of a hierarchical micropore-rich carbon structure through the etching effect during self-activation, which can provide abundant catalytically active sites for the reversible adsorption/desorption of electrolyte ions. Under these synergistic effects, the DSSCs that use this novel carbon CE achieve a quite high power-conversion efficiency of 9.22%. To the best of our knowledge, the value is a new record reported so far for biomass-carbon-based DSSCs.展开更多
Carbon-based materials have become a research hotspot in the field of energy storage devices in recent years due to their abundant resources,low cost,and environmental friendliness.However,the low capacity and poor hi...Carbon-based materials have become a research hotspot in the field of energy storage devices in recent years due to their abundant resources,low cost,and environmental friendliness.However,the low capacity and poor high rate performance still constitute great challenges.Metal organic framework-derived carbon has been widely researched because of its high porosity,tunable structure,and good conductivity.In this work,N/S codoped hierarchical porous carbon microspheres were prepared by a high-temperature heat treatment and atomic doping process using a zinc-based organic framework as the precursor.When used as a potassium-ion battery anode,it has a high reversible specific capacity(435.7 mAh g^(-1)),good rate performance(133.5 mAh g^(-1)at 10,000 m A g^(-1)),and long-term cycling stability(73.2%capacity retention after the 2500th cycle).The potassium storage mechanism of the derived carbon was explained by various electrochemical analysis methods and microstructure characterization techniques,and the relationship between the structural characteristics and electrochemical properties was researched.In a supercapacitor,the porous carbon material exhibits a specific capacitance of 307.2 F g^(-1)at a current density of 0.2 A g^(-1)in a KOH aqueous solution and achieves a retention rate of 99.88%after 10,000 cycles.The assembled symmetric supercapacitor device delivers a high energy density of 6.69 Wh kg^(-1),with a corresponding power density of 2500 W kg^(-1).In addition,density functional theory calculations further confirmed that N/S codoping can improve the adsorption capacities of potassium and hydroxyl ions in the derived carbon.展开更多
通过失重法和电化学测试研究了稀土元素Gd对Mg-6Zn-Zr合金耐腐蚀性能的影响,并通过光学显微镜、扫描电镜和能谱仪观察了合金的显微组织和腐蚀形貌特征。结果表明：稀土Gd的添加有效细化了合金的晶粒,同时形成了Mg2Gd相和Mg-Zn-Gd相。随...通过失重法和电化学测试研究了稀土元素Gd对Mg-6Zn-Zr合金耐腐蚀性能的影响,并通过光学显微镜、扫描电镜和能谱仪观察了合金的显微组织和腐蚀形貌特征。结果表明：稀土Gd的添加有效细化了合金的晶粒,同时形成了Mg2Gd相和Mg-Zn-Gd相。随稀土元素Gd的添加,合金的腐蚀速率先增后减。当稀土Gd含量达到1.5wt%时,较基体合金自腐蚀电位提升36 m V,腐蚀速率下降40%,即Mg-Zn-Zr-1.5Gd合金的耐腐蚀性较好。展开更多
The incorporation of heteroatoms into carbon aerogels(CAs)can lead to structural distortions and changes in active sites due to their smaller size and electronegativity compared to pure carbon.However,the evolution of...The incorporation of heteroatoms into carbon aerogels(CAs)can lead to structural distortions and changes in active sites due to their smaller size and electronegativity compared to pure carbon.However,the evolution of the electronic structure from single-atom doping to heteroatom codoping in CAs has not yet been thoroughly investigated,and the impact of codoping on potassium ion(K+)storage and diffusion pathways as electrode material remains unclear.In this study,experimental and theoretical simulations were conducted to demonstrate that heteroatom codoping,composed of multiple heteroatoms(O/N/B)with different properties,has the potential to improve the electrical properties and stability of CAs compared to single-atom doping.Electronic states near the Fermi level have revealed that doping with O/N/B generates a greater number of active centers on adjacent carbon atoms than doping with O and O/N atoms.As a result of synergy with enhanced wetting ability(contact angle of 9.26°)derived from amino groups and hierarchical porous structure,ON-CA has the most optimized adsorption capacity(−1.62 eV)and diffusion barrier(0.12 eV)of K^(+).The optimal pathway of K^(+)in ON-CA is along the carbon ring with N or O doping.As K^(+)storage material for supercapacitors and ion batteries,it shows an outstanding specific capacity and capacitance,electrochemical stability,and rate performance.Especially,the assembled symmetrical K^(+)supercapacitor demonstrates an energy density of 51.8 Wh kg^(−1),an ultrahigh power density of 443Wkg^(−1),and outstanding cycling stability(maintaining 83.3%after 10,000 cycles in 1M KPF6 organic electrolyte).This research provides valuable insights into the design of highperformance potassium ion storage materials.展开更多
基金financially supported by the National Natural Science Foundation of China (Grant No. 52071041, 11874356, 51802034)supported by the Key Research Program of Frontier Sciences, CAS (Grant No.QYZDB-SSW-SLH016)
文摘Mg_(3)Sb_(2)has attracted intensive attention as a typical Zintl-type thermoelectric material.Despite the exceptional thermoelectric performance in n-type Mg_(3)Sb_(2),the dimensionless figure of merit(zT)of p-type Mg_(3)Sb_(2)remains lower than 1,which is mainly attributed to its inferior electrical properties.Herein,we synergistically optimize the thermoelectric properties of p-type Mg_(3)Sb_(2)materials via codoping of Cd and Ag,which were synthesized by high-energy ball milling combined with hot pressing.It is found that Cd doping not only increases the carrier mobility of p-type Mg_(3)Sb_(2),but also diminishes its thermal conductivity(κ_(tot)),with Mg_(2.85)Cd_(0.5)Sb_(2)achieving a lowκtot value of∼0.67 W m^(−1)K^(−1)at room temperature.Further Ag doping elevates the carrier concentration,so that the power factor is optimized over the entire temperature range.Eventually,a peak zT of∼0.75 at 773 K and an excellent average zT of∼0.41 over 300−773 K are obtained in Mg_(2.82)Ag_(0.03)Cd_(0.5)Sb_(2),which are∼240%and∼490%higher than those of pristine Mg_(3.4)Sb_(2),respectively.This study provides an effective pathway to synergistically improve the thermoelectric performance of p-type Mg_(3)Sb_(2)by codoping Cd and Ag,which is beneficial to the future applications of Mg_(3)Sb_(2)-based thermoelectric materials.
基金supported by the NKBRSF (2007CB815202)NKBRSF (No. 2009CB220010)+2 种基金NSFC (20833008)NSFC (No. 20973168)the Solar Energy Initiative of the Knowledge Innovation Program of the Chinese Academy of Science (No. KGCX2-YW-394-2)
文摘In this study, we have performed first-principles screened exchanged hybrid density function theory with the HSE06 function calculations of the C-Mo, C-W, N-Nb and N-Ta codoped anatase TiO2 systems to investigate the effect of codoping on the electronic structure of TiO2. The calculated results demonstrate that （W（s）＋C（s）） codoped TiO2 narrows the band gap significantly, and have little influence on the position of conduction band edges, therefore, enhances the efficiency of the photocatalytic hydrogen generation from water and the photodegradation of organic pollutants. Moreover, the proper oxygen pressure and temperature are two key factors during synthesis which should be carefully under control so that the desired （W（s）＋C（s）） codoped TiO2 can be obtained.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 51772120, 11604246, 51872112, and 11804305)the Project of Jilin Science and Technology Development Plan (Grant No. 20180201079GX)+1 种基金the Fundamental Research Funds for the Central Universities, the Natural Science Foundation of Chongqing, China (Grant No. cstc2019jcyj-msxm X0391)the Science and Technology Research Program of Chongqing Municipal Education Commission (Grant No. KJQN201901405)。
文摘Diamond crystals were synthesized with different doping proportions of N-H-O at 5.5 GPa-7.1 GPa and 1370℃-1450℃. With the increase in the N-H-O doping ratio, the crystal growth rate decreased, the temperature and pressure conditions required for diamond nucleation became increasingly stringent, and the diamond crystallization process was affected. [111] became the dominant plane of diamonds;surface morphology became block-like;and growth texture,stacking faults, and etch pits increased. The diamond crystals had a two-dimensional growth habit. Increasing the doping concentration also increased the amount of N that entered the diamond crystals as confirmed via Fourier transform infrared spectroscopy. However, crystal quality gradually deteriorated as verified by the red-shifting of Raman peak positions and the widening of the Raman full width at half maximum. With the increase in the doping ratio, the photoluminescence property of the diamond crystals also drastically changed. The intensity of the N vacancy center of the diamond crystals changed, and several Ni-related defect centers, such as the NE1 and NE3 centers, appeared. Diamond synthesis in N-H-O-bearing fluid provides important information for deepening our understanding of the growth characteristics of diamonds in complex systems and the formation mechanism of natural diamonds, which are almost always N-rich and full of various defect centers. Meanwhile, this study proved that the type of defect centers in diamond crystals could be regulated by controlling the N-H-O impurity contents of the synthesis system.
基金Supported by the National Natural Science Foundation of China under Grant No 11474339the National Basic Research Program of China under Grant No 2016YFA0300301the Youth Innovation Promotion Association of the Chinese Academy of Sciences
文摘In the iron-based high-To bulk superconductors, Tc above 50 K was only observed in the electron-doped 1111-type compounds. Here we revisit the electron-doped SmFeAsO polycrystals to make a further investigation for the highest Tc in these materials. To introduce more electron carriers and less crystal lattice distortions, we study the Th and F eodoping effects into the Sm-O layers with heavy electron doping. Dozens of Sm1-xThx FeAsO1-yFy samples are synthesized through the solid state reaction method, and these samples are carefully characterized by the structural, resistive, and magnetic measurements. We find that the codoping of Th and F clearly enhances the superconducting Tc more than the Th or F single-doped samples, with the highest record Tc up to 58.6K when x = 0.2 and y=0.225. Further element doping causes more impurities and lattice distortions in the samples with a weakened superconductivity.
基金supported by the National High Technology Research and Development Program of China(Grant No.2013AA032205)the National Natural Science Foundation of China(Grant No.51272022)the Fundamental Research Funds for the Central Universities,China(Grant No.2012JBZ001)
文摘In this work, a simple method to modulate the crystal phase and morphology with a large amount of K＋ions codoping is proposed. The phase changes to the mixture of β-Na YF4 and β-KYF4 with increasing the content of K^＋ions to 80 mol%.When it exceeds 80 mol%, β-Na YF4 disappears gradually and β-KYF4 dominates with a poor crystalline. In addition, the morphology changes from nanosphere to nanoplate, and then to nanoprism, which indicates that a higher content of K^＋ions favors the growth rates along [0001] than the [10-10] of the nanocrystals. Additionally, the upconversion（UC） luminescence properties and the ratio of red/green（R/G） UC intensity of samples with different phases and morphologies are detected,which makes it possible to tune the UC fluorescence by varying the concentration of K^＋ions.
基金supported by the National Natural Science Foundation of China(No.51102047,51472050)State Key Laboratory of Photocatalysis on Energy and Environment Open Project
文摘In this paper we present a novel report on the upconversion luminescence performance of NaY0.92Yb0.05Er0.03F4 enhanced by Zr^4＋ codoping. The luminescence intensity of the tridoped hexagonal NaYF_4 synthesized by a hydrothermal method increased to the maximum, about seven times of the non-Zr^4＋ sample when the Zr^4＋ codoping concentration rose to 6 mol%, while the luminescence lifetime was also prolonged by Zr^4＋ codoping. To explore the relationships between the microstructure and upconversion properties, X-ray powder diffraction, field emission scanning electron microscope, electron energy-dispersive spectroscopy and upconversion emission spectroscopy were employed. From these characterizations, we found that the codoping of Zr^4＋ could modulate the crystal microstructure of NaYF_4 for higher upconversion luminescence intensity and longer lifetime. This study may be helpful for the design and synthesis of high-performance upconversion materials.
基金supported by the National Natural Science Foundation of China (31890771 and 31901249)the Young Elite Scientists Sponsorship Program by CAST (2019QNRC001)+3 种基金the Hunan Provincial Technical Innovation Platform and Talent Program in Science and Technology (2020RC3041)the Training Program for Excellent Young Innovators of Changsha (kq2106056)the Hunan Provincial Natural Science Foundation of China (2022JJ30079)the Postgraduate Technology Innovation Project of Central South University of Forestry and Technology (2022CX02017)。
文摘Carbon materials are effective substitutes for Pt counter electrodes(CEs) in dye-sensitized solar cells(DSSCs). However, many of these materials, such as carbon nanotubes and graphene, are expensive and require complex preparation process. Herein, waste lignin, recycled from hazardous black liquors,is used to create oxygen-nitrogen-sulfur codoped carbon microspheres for use in DSSC CEs through the facile process of low-temperature preoxidation and high-temperature self-activation. The large number of ester bonds formed by preoxidation increase the degree of cross-linking of the lignin chains, leading to the formation of highly disordered carbon with ample defect sites during pyrolysis. The presence of organic O/N/S components in the waste lignin results in high O/N/S doping of the pyrolysed carbon,which increases the electrolyte ion adsorption and accelerates the electron transfer at the CE/electrolyte interface, as confirmed by density functional theory(DFT) calculations. The presence of inorganic impurities enables the construction of a hierarchical micropore-rich carbon structure through the etching effect during self-activation, which can provide abundant catalytically active sites for the reversible adsorption/desorption of electrolyte ions. Under these synergistic effects, the DSSCs that use this novel carbon CE achieve a quite high power-conversion efficiency of 9.22%. To the best of our knowledge, the value is a new record reported so far for biomass-carbon-based DSSCs.
基金supported by the National Natural Science Foundation of China (51764029, 52004116)the National Key Research and Development Program of China (2019YFC1803501)+1 种基金the Applied Basic Research Plan of Yunnan Province(202001AU070039, 2018FB087)the Science Research Foundation of Yunnan Provincial Department of Education (2020J0070)
文摘Carbon-based materials have become a research hotspot in the field of energy storage devices in recent years due to their abundant resources,low cost,and environmental friendliness.However,the low capacity and poor high rate performance still constitute great challenges.Metal organic framework-derived carbon has been widely researched because of its high porosity,tunable structure,and good conductivity.In this work,N/S codoped hierarchical porous carbon microspheres were prepared by a high-temperature heat treatment and atomic doping process using a zinc-based organic framework as the precursor.When used as a potassium-ion battery anode,it has a high reversible specific capacity(435.7 mAh g^(-1)),good rate performance(133.5 mAh g^(-1)at 10,000 m A g^(-1)),and long-term cycling stability(73.2%capacity retention after the 2500th cycle).The potassium storage mechanism of the derived carbon was explained by various electrochemical analysis methods and microstructure characterization techniques,and the relationship between the structural characteristics and electrochemical properties was researched.In a supercapacitor,the porous carbon material exhibits a specific capacitance of 307.2 F g^(-1)at a current density of 0.2 A g^(-1)in a KOH aqueous solution and achieves a retention rate of 99.88%after 10,000 cycles.The assembled symmetric supercapacitor device delivers a high energy density of 6.69 Wh kg^(-1),with a corresponding power density of 2500 W kg^(-1).In addition,density functional theory calculations further confirmed that N/S codoping can improve the adsorption capacities of potassium and hydroxyl ions in the derived carbon.
基金This work was supported by the National Natural Science Foundation of China （ No.：60671010, 20775045 ） and Natural Science Foundation of Shandong Province （Y2006B29）. The authors wish to thank Prof. D.R. Chen and Mr. H.F. Shao for the help in measurements of XRD and XPS, respectively.
文摘通过失重法和电化学测试研究了稀土元素Gd对Mg-6Zn-Zr合金耐腐蚀性能的影响,并通过光学显微镜、扫描电镜和能谱仪观察了合金的显微组织和腐蚀形貌特征。结果表明：稀土Gd的添加有效细化了合金的晶粒,同时形成了Mg2Gd相和Mg-Zn-Gd相。随稀土元素Gd的添加,合金的腐蚀速率先增后减。当稀土Gd含量达到1.5wt%时,较基体合金自腐蚀电位提升36 m V,腐蚀速率下降40%,即Mg-Zn-Zr-1.5Gd合金的耐腐蚀性较好。
基金financially supported by the Natural Science Foundation of China(Grant No.22005165)the Major Science and Technology Innovation Project of Shandong(Grant No.2019JZZY010507)+1 种基金the Qingdao Municipal Science and Technology Bureau(Grant No.17-1-1-86-jch)the Key Technology Research and Development Program of Shandong(Grant No.2018GGX108005).
文摘The incorporation of heteroatoms into carbon aerogels(CAs)can lead to structural distortions and changes in active sites due to their smaller size and electronegativity compared to pure carbon.However,the evolution of the electronic structure from single-atom doping to heteroatom codoping in CAs has not yet been thoroughly investigated,and the impact of codoping on potassium ion(K+)storage and diffusion pathways as electrode material remains unclear.In this study,experimental and theoretical simulations were conducted to demonstrate that heteroatom codoping,composed of multiple heteroatoms(O/N/B)with different properties,has the potential to improve the electrical properties and stability of CAs compared to single-atom doping.Electronic states near the Fermi level have revealed that doping with O/N/B generates a greater number of active centers on adjacent carbon atoms than doping with O and O/N atoms.As a result of synergy with enhanced wetting ability(contact angle of 9.26°)derived from amino groups and hierarchical porous structure,ON-CA has the most optimized adsorption capacity(−1.62 eV)and diffusion barrier(0.12 eV)of K^(+).The optimal pathway of K^(+)in ON-CA is along the carbon ring with N or O doping.As K^(+)storage material for supercapacitors and ion batteries,it shows an outstanding specific capacity and capacitance,electrochemical stability,and rate performance.Especially,the assembled symmetrical K^(+)supercapacitor demonstrates an energy density of 51.8 Wh kg^(−1),an ultrahigh power density of 443Wkg^(−1),and outstanding cycling stability(maintaining 83.3%after 10,000 cycles in 1M KPF6 organic electrolyte).This research provides valuable insights into the design of highperformance potassium ion storage materials.
