MXenes,drawn from MAX phases,are special two-dimensional substances with numerous advantages in nonlinear optics,specifically in giant and ultrashort pulsed-laser applications.Ti_(3)C_(2)T_(x)and Ti_(2)CT_(x)nanosheet...MXenes,drawn from MAX phases,are special two-dimensional substances with numerous advantages in nonlinear optics,specifically in giant and ultrashort pulsed-laser applications.Ti_(3)C_(2)T_(x)and Ti_(2)CT_(x)nanosheets however rapidly deteriorate under ambient conditions,limiting their applications.This paper demonstrates how excellent modulation depth of one of the MAX phase compounds vanadium zinc carbide(V_2ZnC)makes it a brilliant saturable absorber(SA)in passively Q-switched all-fiber pulsed lasers,integrated such that a 16.73-μm V_(2)ZnC-polyvinyl alcohol(PVA)thin film acts as SA in the laser.Saturable and non-saturable absorptions were found to be 13.2%and 10.47%,while saturation optical intensity and modulation depth were 6.25 k W/cm^(2)and 12.43%,respectively,illustrating the optical nonlinearity.The superiority of MAX-PVA,fabricated in four distinct ratios,was demonstrated by the fact that it self-starts a giant pulsed laser at pump power as low as 22.5 mW and firmly accomplished 120.6 kHz repetition rate with a pulse width of 2.08μs.It is a fine SA for the use of pulsed-laser production using all-fiber laser due to fabrication simplicity and great optical,thermophysical,and mechanical qualities.展开更多
The copolymerizations of ethylene with 1-hexene or 1-0ctene by using TiC14/MgCI2/THF catalysts modified with different metal halide additives （ZnCI2, SIC14, and the combined ZnC12-SiCl4） were investigated based on c...The copolymerizations of ethylene with 1-hexene or 1-0ctene by using TiC14/MgCI2/THF catalysts modified with different metal halide additives （ZnCI2, SIC14, and the combined ZnC12-SiCl4） were investigated based on catalytic activity and copolymer properties. It was found that the catalyst modified with mixed ZnC12-SiC14 revealed the highest activities for both ethylene/1-hexene and ethylene/1-0ctene copolymerization. The increase in activities was due to the formation of acidic sites by modifying the catalysts with Lewis acids. Based on the FTIR measurements, the characteristic C--O--C peaks of the catalysts modified with metal halide additives were slightly shifted to lower wavenumber when compared to the unmodified catalyst. This showed that the modified catalysts could generate more acid sites in the TiC14/MgC12/THF catalytic system leading to an increase in activities as well as comonomer insertion （as proven by IaC-NMR）. However, Lewis acid- modifications did not affect the microstructure of the copolymers obtained. By comparison on the properties of copolymers prepared with the unmodified catalyst, it was found that polymers with ZnC12 and/or SIC14 modification exhibited a slight decrease in melting temperature, crystallinity and density. It is suggested that these results were obtained based on the different amount of ct-olefins insertion, regardless of the types of Lewis acids and comonomer.展开更多
基金supported by the Ministry of Higher under Fundamental Research Grant Scheme(No.FRGS/1/2020/TK0/UTM/02/46)Nippon Sheet Glass Grant(No.R.K130000.7343.4B818)。
文摘MXenes,drawn from MAX phases,are special two-dimensional substances with numerous advantages in nonlinear optics,specifically in giant and ultrashort pulsed-laser applications.Ti_(3)C_(2)T_(x)and Ti_(2)CT_(x)nanosheets however rapidly deteriorate under ambient conditions,limiting their applications.This paper demonstrates how excellent modulation depth of one of the MAX phase compounds vanadium zinc carbide(V_2ZnC)makes it a brilliant saturable absorber(SA)in passively Q-switched all-fiber pulsed lasers,integrated such that a 16.73-μm V_(2)ZnC-polyvinyl alcohol(PVA)thin film acts as SA in the laser.Saturable and non-saturable absorptions were found to be 13.2%and 10.47%,while saturation optical intensity and modulation depth were 6.25 k W/cm^(2)and 12.43%,respectively,illustrating the optical nonlinearity.The superiority of MAX-PVA,fabricated in four distinct ratios,was demonstrated by the fact that it self-starts a giant pulsed laser at pump power as low as 22.5 mW and firmly accomplished 120.6 kHz repetition rate with a pulse width of 2.08μs.It is a fine SA for the use of pulsed-laser production using all-fiber laser due to fabrication simplicity and great optical,thermophysical,and mechanical qualities.
基金financially supported by the Dusadeepipat scholarship at Graduate school of Chulalongkorn Universitythe Thailand Research Fund(TRF)+1 种基金the Higher Education Promotion and National Research University Development(AM1088A)the office of the Higher Education Commission(CHE)
文摘The copolymerizations of ethylene with 1-hexene or 1-0ctene by using TiC14/MgCI2/THF catalysts modified with different metal halide additives （ZnCI2, SIC14, and the combined ZnC12-SiCl4） were investigated based on catalytic activity and copolymer properties. It was found that the catalyst modified with mixed ZnC12-SiC14 revealed the highest activities for both ethylene/1-hexene and ethylene/1-0ctene copolymerization. The increase in activities was due to the formation of acidic sites by modifying the catalysts with Lewis acids. Based on the FTIR measurements, the characteristic C--O--C peaks of the catalysts modified with metal halide additives were slightly shifted to lower wavenumber when compared to the unmodified catalyst. This showed that the modified catalysts could generate more acid sites in the TiC14/MgC12/THF catalytic system leading to an increase in activities as well as comonomer insertion （as proven by IaC-NMR）. However, Lewis acid- modifications did not affect the microstructure of the copolymers obtained. By comparison on the properties of copolymers prepared with the unmodified catalyst, it was found that polymers with ZnC12 and/or SIC14 modification exhibited a slight decrease in melting temperature, crystallinity and density. It is suggested that these results were obtained based on the different amount of ct-olefins insertion, regardless of the types of Lewis acids and comonomer.
文摘以氯化胆碱(ChCl)和水合草酸(H_2C_2O_4·2H_2O)为原料合成氯化胆碱/水合草酸低共熔溶剂(ChCl/H_2C_2O_4·2H_2O DESs)。研究ChCl/H_2C_2O_4·2H_2O DESs的组成与熔点的关系,1ChCl:1H_2C_2O_4·2H_2O DES的黏度、电导率与温度的关系,ZnO在1ChCl:1H_2C_2O_4·2H_2O DES中的溶解度及溶解行为。研究结果表明:1ChCl:1H_2C_2O_4·2H_2O DES的低共熔点为9℃,在150℃以内具有热稳定性;随温度从297 K升高到333 K,1ChCl:1H_2C_2O_4·2H_2O DES的黏度从199.4 m Pa·s降低到35.6 m Pa·s,电导率则从3.55 m S/cm增大至15.01 m S/cm,ZnO的溶解度由0.310 mol/L增至0.860 mol/L;未发现ZnO与体系中的正离子或负离子结合成离子物种形式存在,溶解于1ChCl:1H_2C_2O_4·2H_2O DES中的ZnO与体系中的草酸反应生成可溶于该体系的ZnC_2O_4。
