Considering the action mechanisms of overpressure on physical changes in skeleton particles of deep reservoir rocks and the differences in physical changes of skeleton particles under overpressure and hydrostatic pres...Considering the action mechanisms of overpressure on physical changes in skeleton particles of deep reservoir rocks and the differences in physical changes of skeleton particles under overpressure and hydrostatic pressure, the sandstone of the Jurassic Toutunhe Formation in the southern margin of Junggar Basin was taken as an example for physical modeling experiment to analyze the action mechanisms of overpressure on the physical properties of deep reservoirs. (1) In the simulated ultra-deep layer with a burial depth of 6000-8000 m, the mechanical compaction under overpressure reduces the remaining primary pores by about a half that under hydrostatic pressure. Overpressure can effectively suppress the mechanical compaction to allow the preservation of intergranular primary pores. (2) The linear contact length ratio under overpressure is always smaller than the linear contact length ratio under hydrostatic pressure at the same depth. In deep reservoirs, the difference between the mechanical compaction degree under overpressure and hydrostatic pressure shows a decreasing trend, the effect of abnormally high pressure to resist the increase of effective stress is weakened, and the degree of mechanical compaction is gradually close to that under hydrostatic pressure. (3) The microfractures in skeleton particles of deep reservoirs under overpressure are thin and long, while the microfractures in skeleton particles of deep reservoirs under hydrostatic pressure are short and wide. This difference is attributed to the probable presence of tension fractures in the rocks containing abnormally high pressure fluid. (4) The microfractures in skeleton particles under overpressure were mainly formed later than that under hydrostatic pressure, and the development degree and length of microfractures both extend deeper. (5) The development stages of microfractures under overpressure are mainly controlled by the development stages of abnormally high pressure and the magnitude of effective stress acting on the skeleton particles. Moreover, the development stages of microfractures in skeleton particles are more than those under hydrostatic pressure in deep reservoir. The multi-stage abnormally high pressure plays an important role in improving the physical properties of deep reservoirs.展开更多
The distribution and genetic mechanisms of abnormal pressures in the Bohai Bay Basin were systematically analyzed. Abnormal pressures are widely developed in the Bohai Bay Basin, primarily in the Paleogene E2s4, E2s3,...The distribution and genetic mechanisms of abnormal pressures in the Bohai Bay Basin were systematically analyzed. Abnormal pressures are widely developed in the Bohai Bay Basin, primarily in the Paleogene E2s4, E2s3, Es1, and Ed formations. From the onshore area of the Bohai Bay Basin to the center of the Bozhong area, the top depth of the overpressured zone in each depression increases gradually, the overpressured strata in each depression gradually move to younger formations, and the pressure structure successively alters from single-bottom- overpressure to double-bottom-overpressure and finally to double-top-overpressure. The distribution of overpressured area is consistent with the sedimentary migration controlled by the tectonic evolution of the Bohai Bay Basin, which is closely related to the hydrocarbon-generation capability of active source rocks. The overpressured strata are consistent with the source-rock intervals in each depression; the top of the overpressured zone is synchronous with the hydrocarbon generation threshold in each depression; the hydrocarbon generation capability is positively correlated with the overpressure magnitude in each formation. Undercompaction was the main mechanism of overpressure for depressions with fluid pressure coefficients less than 1.2, whereas hydrocarbon generation was the main mechanism for depressions with fluid pressure coefficients greater than 1.5.展开更多
基金Supported by PetroChina Science and Technology Project(2021DJ0202).
文摘Considering the action mechanisms of overpressure on physical changes in skeleton particles of deep reservoir rocks and the differences in physical changes of skeleton particles under overpressure and hydrostatic pressure, the sandstone of the Jurassic Toutunhe Formation in the southern margin of Junggar Basin was taken as an example for physical modeling experiment to analyze the action mechanisms of overpressure on the physical properties of deep reservoirs. (1) In the simulated ultra-deep layer with a burial depth of 6000-8000 m, the mechanical compaction under overpressure reduces the remaining primary pores by about a half that under hydrostatic pressure. Overpressure can effectively suppress the mechanical compaction to allow the preservation of intergranular primary pores. (2) The linear contact length ratio under overpressure is always smaller than the linear contact length ratio under hydrostatic pressure at the same depth. In deep reservoirs, the difference between the mechanical compaction degree under overpressure and hydrostatic pressure shows a decreasing trend, the effect of abnormally high pressure to resist the increase of effective stress is weakened, and the degree of mechanical compaction is gradually close to that under hydrostatic pressure. (3) The microfractures in skeleton particles of deep reservoirs under overpressure are thin and long, while the microfractures in skeleton particles of deep reservoirs under hydrostatic pressure are short and wide. This difference is attributed to the probable presence of tension fractures in the rocks containing abnormally high pressure fluid. (4) The microfractures in skeleton particles under overpressure were mainly formed later than that under hydrostatic pressure, and the development degree and length of microfractures both extend deeper. (5) The development stages of microfractures under overpressure are mainly controlled by the development stages of abnormally high pressure and the magnitude of effective stress acting on the skeleton particles. Moreover, the development stages of microfractures in skeleton particles are more than those under hydrostatic pressure in deep reservoir. The multi-stage abnormally high pressure plays an important role in improving the physical properties of deep reservoirs.
基金the National Natural Science Foundation(Grant No.41502129)the Important National Science & Technology Specific Projects(grant No.2016ZX05006-003)the Fundamental Research Funds for the Central Universities(grant No.14CX05015A)
文摘The distribution and genetic mechanisms of abnormal pressures in the Bohai Bay Basin were systematically analyzed. Abnormal pressures are widely developed in the Bohai Bay Basin, primarily in the Paleogene E2s4, E2s3, Es1, and Ed formations. From the onshore area of the Bohai Bay Basin to the center of the Bozhong area, the top depth of the overpressured zone in each depression increases gradually, the overpressured strata in each depression gradually move to younger formations, and the pressure structure successively alters from single-bottom- overpressure to double-bottom-overpressure and finally to double-top-overpressure. The distribution of overpressured area is consistent with the sedimentary migration controlled by the tectonic evolution of the Bohai Bay Basin, which is closely related to the hydrocarbon-generation capability of active source rocks. The overpressured strata are consistent with the source-rock intervals in each depression; the top of the overpressured zone is synchronous with the hydrocarbon generation threshold in each depression; the hydrocarbon generation capability is positively correlated with the overpressure magnitude in each formation. Undercompaction was the main mechanism of overpressure for depressions with fluid pressure coefficients less than 1.2, whereas hydrocarbon generation was the main mechanism for depressions with fluid pressure coefficients greater than 1.5.