An analysis of As_2S_3 chirped fiber grating formed by two-photon absorption effect

When femtosecond laser pulses interfere with chirped femtosecond laser pulses in As2S3 fiber, a chirped fiber grating is formed. An analytical expression is given to describe the chirped grating, and its Bragg reflectivity is calculated. Because of the high photosensitive effect of As2S3 material, the chirped fiber grating has a wide Bragg reflective spectrum and high reflectivity by choosing proper parameters. This indicates that the chirped fiber grating can be used as a stretcher in the femtosecond chirped pulse amplification (CPA) system.

J/ψ-N center of mass energy dependence of nuclear absorption effect on J/ψ production

In this paper, the J/ψ nuclear absorption effect is studied at RHIC and LHC energies with the EKS98 shadowing parameterizations. By assuming that the J/ψ absorption cross section, σ abs , increases with the charmonium-nucleon （J/ψ-N） center of mass energy, s J/ψN , it is found that σ abs should depend on x F （or y） at a certain center of mass energy per nucleon pair,s , especially at LHC energies. The theoretical results with the x F （or y）-dependence of the absorption effect are in good agreement with the experiment data from PHENIX in d-Au collisions and the predicted results will be examined by the forthcoming experimental data from LHC in d-Pb collisions. Finally, we also present baseline calculations of cold nuclear matter effects on J/ψ production in nucleus-nucleus （A-A） collisions and find that the x F （or y）-dependence of absorption effect is very small at both RHIC and LHC energies in A-A collisions.

Optical Absorption Enhancement Effects of Silver Nanodisk Arrays in the Application of Silicon Solar Cell

Surface plasmon resonance of noble metal nanoparticles leads to the optical absorption enhancement effects,which have great potential applications in solar cell.By using the general numerical method of discrete dipole approximation （DDA）,we study the absorption and scattering properties of two-dimensional square silver nanodisks （2D SSN） arrays on the single crystal silicon solar cell.Based on the effective reflective index model of the single crystal silicon solar cell,we investigate the optical enhancement absorption of light energy by varying the light incident direction,particle size,aspect ratio,and interparticle spacing of the silver nanodisks.The peak values and position of the optical extinction spectra of the 2D square arrays of noble metal nanodisks are obtained with the different array structures.

Multi-Electron Effects in Attosecond Transient Absorption of CO Molecules

Using the fully propagated time-dependent Hartree–Fock method, we identify that both the dynamic core polarization and multiorbital contributions are important in the attosecond transient absorption of CO molecules.The dynamics of core electrons effectively modifies the behaviors of electrons in the highest occupied molecular orbital, resulting in the modulation of intensity and position of the absorption peaks. Depending on the alignment angles, different inner orbitals are identified to contribute, and even dominate the total absorption spectra. As a result, multi-electron fingerprints are encoded in the absorption spectra, which shed light on future applications of attosecond transient absorption in complex systems.

Initiating Binary Metal Oxides Microcubes Electromagnetic Wave Absorber Toward Ultrabroad Absorption Bandwidth Through Interfacial and Defects Modulation

Cobalt nickel bimetallic oxides(NiCo_(2)O_(4))have received numerous attentions in terms of their controllable morphology,high temperature,corrosion resistance and strong electromagnetic wave(EMW)absorption capability.However,broadening the absorption bandwidth is still a huge challenge for NiCo_(2)O_(4)-based absorbers.Herein,the unique NiCo_(2)O_(4)@C core-shell microcubes with hollow structures were fabricated via a facile sacrificial template strategy.The concentration of oxygen vacancies and morphologies of the three-dimensional(3D)cubic hollow core-shell NiCo_(2)O_(4)@C framework were effectively optimized by adjusting the calcination temperature.The specially designed 3D framework structure facilitated the multiple reflections of incident electromagnetic waves and provided rich interfaces between multiple components,generating significant interfacial polarization losses.Dipole polarizations induced by oxygen vacancies could further enhance the attenuation ability for the incident EM waves.The optimized NiCo_(2)O_(4)@C hollow microcubes exhibit superior EMW absorption capability with minimum RL(RLmin)of-84.45 dB at 8.4 GHz for the thickness of 3.0 mm.Moreover,ultrabroad effective absorption bandwidth(EAB)as large as 12.48 GHz(5.52-18 GHz)is obtained.This work is believed to illuminate the path to synthesis of high-performance cobalt nickel bimetallic oxides for EMW absorbers with excellent EMW absorption capability,especially in broadening effective absorption bandwidth.

Study of Lead Absorption and Its Effect on Children's Development

Blood lead levels of 180 pupils from two elementary schools were determined and the intellec- tual development of the children was followed.The children in these two groups were similar in most nonlead variables.Results showed that pupils at the school near a battery plant had higher blood lead levels than those at a school in a residential neighborhood.An evident dose- effect relationship between blood lead level and children's performance on psychological testing existed:the higher the blood level,the lower the intelligence quotient.This relationship re- mained after confounding factors were controlled by stepwise regression analysis.Partial regres- sion coefficients for PbB and verbal IQ,performance IQ,and full-scale IQ were -0.85,-0.71, and -0.91,respectively.1989 Academic Press,Inc.

Effect of Optical Microcavity on Absorption Behavior of Homo-Tandem Organic Solar Cells

The optical microcavity effect of the homo-tandem solar cells is explored utilizing the transfer matrix method. Ultrathin silver can reduce the deadzone effect compared with graphene and PH1000, and leads to a factor of 1.07 enhancement for an electrical field in a metal microcavity. The enhancement is considered to be the fact that strong exciton-photon coupling occurs in the microcavity due to ultrathin Ag. On the basis of the optical enhancement effect, optical behaviors are manipulated by varying the microcavity length. It is confirmed that ultrathin silver can serve as an ideal interconnection layer as the active layer is ～ 150nm thick and the thickness ratio between front and rear active layers lies between 1：1 and 1：2.

Microwave absorption and bandwidth study of Y_(2)Co_(17)rare earth soft magnetic alloy with easy-plane anisotropy

The easy-plane anisotropy of the Y_(2)Co_(17)rare earth soft magnetic alloy has high saturation magnetization and operating frequency,and good impedance matching.Therefore,it is expected to become a kind of high-performance microwave absorbing material.In this paper,Y_(2)Co_(17)alloy was prepared by a reduction-diffusion method,and its micropowder was prepared as polyurethane(PU)based composite absorbing materials(Y_(2)Co_(17)/PU composites).The microwave properties of composites with different volume fractions were calculated.The composites showed outstanding absorption characteristics in the range of 20-30 vol%,and the minimum reflection loss(RL)was less than-50 d B.When the volume fraction was25%,the effective absorption bandwidth could cover the X-band at a thickness of 1.5 mm,and the Ku-band at a thickness of1.08 mm.The absorption mechanism was analyzed by the interface reflection model.The RL absorption peak bandwidth mechanism was discussed by using the amplitude relation and calculating the effective absorption bandwidth at different thicknesses.The effective absorption bandwidth values were in good agreement with the theoretical expectation.

Effect of ocean environmental factors on sound absorption by boric acid relaxation in sea water

By using the expressions for the maximum absorption per wavelength (αλ),and the relaxation frequency fr of the boric acid relaxation derived previously by the author and employing the related oceanographic literatures, the effects of pressure, temperature, pH and salinity on (αλ)r and ∫r of the boric acid relaxation in sea water have been estimated. Results show that ( αλ), not only increases with pH but also increases approximately linearly with pressure and temperature, and is nearly proportional to the 1. 35 power of salinity. However, pressure, pH and salinity have negligible effect on ∫r; therefore, ∫r, can be approximately expressed as a function of temperature only. Comparisons of the predicted with the measured ( αλ)r and ∫r in different ocean areas are given.

Large-scale gas accumulation mechanisms and reservoir-forming geological effects in sandstones of Central and Western China

Large-scale gas accumulation areas in large oil-gas basins in central and Western China have multiple special accumulation mechanisms and different accumulation effects.Based on the geological theory and method of natural gas reservoir formation,this study examined the regional geological and structural background,formation burial evolution,basic characteristics of gas reservoirs,and fluid geology and geochemistry of typical petroliferous basins.The results show that the geological processes such as structural pumping,mudstone water absorption,water-soluble gas degasification and fluid sequestration caused by uplift and denudation since Himalayan stage all can form large-scale gas accumulation and different geological effects of gas accumulation.For example,the large-scale structural pumping effect and fluid sequestration effect are conducive to the occurrence of regional ultra-high pressure fluid and the formation of large-scale ultra-high pressure gas field;mudstone water absorption effect in the formation with low thickness ratio of sandstone to formation is conducive to the development of regional low-pressure and water free gas reservoir;the water-soluble gas degasification effect in large-scale thick sandstone can not only form large-scale natural gas accumulation;moreover,the degasification of water-soluble gas produced by the lateral migration of formation water will produce regional and regular isotopic fractionation effect of natural gas,that is,the farther the migration distance of water-soluble gas is,the heavier the carbon isotopic composition of methane formed by the accumulation.

A Review on Metal-Organic Framework-Derived Porous Carbon-Based Novel Microwave Absorption Materials

The development of microwave absorption materials(MAMs) is a considerable important topic because our living space is crowed with electromagnetic wave which threatens human’s health.And MAMs are also used in radar stealth for protecting the weapons from being detected.Many nanomaterials were studied as MAMs,but not all of them have the satisfactory performance.Recently,metal-organic frameworks(MOFs) have attracted tremendous attention owing to their tunable chemical structures,diverse properties,large specific surface area and uniform pore distribution.MOF can transform to porous carbon(PC) which is decorated with metal species at appropriate pyrolysis temperature.However,the loss mechanism of pure MOF-derived PC is often relatively simple.In order to further improve the MA performance,the MOFs coupled with other loss materials are a widely studied method.In this review,we summarize the theories of MA,the progress of different MOF-derived PC-based MAMs,tunable chemical structures incorporated with dielectric loss or magnetic loss materials.The different MA performance and mechanisms are discussed in detail.Finally,the shortcomings,challenges and perspectives of MOF-derived PC-based MAMs are also presented.We hope this review could provide a new insight to design and fabricate MOF-derived PC-based MAMs with better fundamental understanding and practical application.

Facile synthesis of yolk-shell Ni@void@SnO2（Ni3Sn2） ternary composites via galvanic replacement/Kirkendall effect and their enhanced microwave absorption properties

Yolk-shell ternary composites composed of a Ni sphere core and a SnO2（Ni3Sn2） shell were successfully prepared by a facile two-step method. The size, morphology, microstructure, and phase purity of the resulting composites were characterized by scanning electron microscopy, energy dispersive X-ray spectroscopy, transmission electron microscopy （TEM）, high-resolution TEM, selected-area electron diffraction, and powder X-ray diffraction. The core sizes, interstitial void volumes, and constituents of the yolk-shell structures varied by varying the reaction time. A mechanism based on the time-dependent experiments was proposed for the formation of the yolk-shell structures. The yolk-shell structures were formed by a synergistic combination of an etching reaction, a galvanic replacement reaction, and the Kirkendall effect. The yolk-shell ternary SnO2 （Ni3Sn2）@Ni composites synthesized at a reaction time of 15 h showed excellent microwave absorption properties. The reflection loss was found to be as low as -43 dB at 6.1 GHz. The enhanced microwave absorption properties may be attributed to the good impedance match, multiple reflections, the scattering owing to the voids between the core and the shell, and the effective complementarities between the dielectric loss and the magnetic loss. Thus, the yolk-shell ternary composites are expected to be promising candidates for microwave absorption applications, lithium ion batteries, and photocatalysis.

Direct detection of the transient superresolution effect of nonlinear saturation absorption thin films

Using a strong nonlinear saturation absorption effect is one technique for breaking through the diffraction limit. In this technique, formation of a dynamic and reversible optical pinhole channel and transient superresolution is critical. In this work, a pump–probe transient detection and observation–experimental setup is constructed to explore the formation process directly. A Ge2Sb2Te5 thin film with strong nonlinear saturation absorption is investigated. The dynamic evolution of the optical pinhole channel is detected and imaged, and the transient superresolution spot is directly captured experimentally. Results verify that the superresolution effect originates from the generation of an optical pinhole channel and that the formation of the optical pinhole channel is dynamic and reversible. A good method is provided for direct detection and observation of the transient process of the superresolution effect of nonlinear thin films.

Construction of Co_(2)NiO_(4)@MnCo_(2)O_(4.5)nanoparticles with multiple hetero-interfaces for enhanced electromagnetic wave absorption

Nanocomposites with heterogeneous structures and magneto-electric synergistic losses have broad prospects for improving electromagnetic wave(EMW)absorption performance.In this study,we synthesized Co_(2)NiO_(4)@MnCo_(2)O_(4.5)nanoparticles with abundant hetero-interfaces and multiple magnetoelectric loss mechanisms by a facile hydrothermal method.The excess 0.5 oxygen atoms in MnCo_(2)O_(4.5) produce more vacancies and contribute to the enhancement of electrical conductivity.Sequential nanoneedle clusters facilitate multiple reflections and absorption of EMW in the materials,which are accompanied by an abundance of heterogeneous interfaces to improve the dielectric loss.The Co_(2)NiO_(4)@MnCo_(2)O_(4.5)composites showed a minimum reflection loss(RLmin)of30.01 dB and a superior effective absorption bandwidth(EAB)of 6.12 GHz(11.88 GHze18 GHz)at a thickness of 2.00 mm.Computer Simulation Technology(CST)revealed that the obtained particles show very low radar crosssection(RCS)values and almost full coverage angles.The maximum reduction of RCS at vertical incidence reaches 19.98 dB m2.The Co_(2)NiO_(4)@MnCo_(2)O_(4.5)nanoparticles exhibit outstanding radar attenuation properties,which can effectively inhibit the reflection and scattering of EMW.Therefore,the prepared Co_(2)NiO_(4)@MnCo_(2)O_(4.5)absorbers have great application potential in the field of EMW absorption.

Modelling, Transient Simulation and Economic Analysis of Solar Thermal Based Air Conditioning System in Gujarat

Commercial building sector accounts for 8% of the total electricity consumption in India. Cooling activities (HVAC) in commercial buildings consume 55% of the total energy utilized. Consequently, CO2 emissions from conventional buildings in India were estimated to be 98 metric tonnes of CO2 per million ft2 in 2014. Solar thermal air conditioning can be the solution to these demands and can contribute to about 15% to 20% of India’s total oil consumption thereby reducing the dependence on fossil fuels. Hence, the main objective of the work is to model and simulate a solar absorption cooling system for GERMI office building located in Gandhinagar, Gujarat, India, using the transient simulation software ‘TRNSYS’. Cooling load estimation and comfort conditions required for the building were determined based on ASHRAE standards. Evacuated tube collectors were selected because of its market availability, ease of manufacturing and proven technology. Single effect absorption chiller was used because of its commercial availability. The effects of storage tank volume, collector area and collector slope were also investigated for parametric optimization. The results of the simulation and parametric analysis are analyzed and presented in the paper.

Cold nuclear matter effects on J/ψ productionin d-Au collisions

The medium modifications of J/ψ production in d-Au collisions at SNN = 200 GeV are studied in the Glauber model. By means of the c.m. energy loss parameter per collision studied in Drell-Yan process, taking account of the inhomogeneous shadowing effect, we find that the initial-state energy loss effect can be ignored in d-Au collisions at mid-rapidity. Then, the final-state J/ψ absorption effect is also considered and the theoretical results are in good agreement with the recent experimental data given by PHENIX. Finally, the experimental results of J/ψ production in d-Pb collisions are also predicted at RHIC and LHC energies respectively.

One-step synthesis and electromagnetic absorption properties of high entropy rare earth hexaborides(HE REB6)and high entropy rare earth hexaborides/borates(HE REB6/HE REB03)composite powders

Considering the emergence of severe electromagnetic interference problems,it is vital to develop electromagnetic(EM)wave absorbing materials with high dielectric,magnetic loss and optimized impedance matching.However,realizing the synergistic dielectric and magnetic losses in a single phase material is still a challenge.Herein,high entropy(HE)rare earth hexaborides(REB6)powders with coupling of dielectric and magnetic losses were designed and successfully synthesized through a facial one-step boron carbide reduction method,and the effects of high entropy borates intermedia phases on the EM wave absorption properties were investigated.Five HE REB6 ceramics including(Ce0.2Y0.2Sm0.2Er0.2Yb0.2)B6,(Ce0.2Hu0.2Sm0.2Er0.2Yb0.2)B6,(Ce0.2Y0.2Eu0.2Er0.2Yb0.2)B6,(Ce0.2Ya2Sm0.2Eu0.2Yb0.2)B6,and(Nd0.2Y0.2Sm0.2Eu0.2Yb0.2)B6 possess CsCl-type cubic crystal structure,and their theoretical densities range from 4.84 to 5.25 g/cm^(3).(Ce02Y0.2Sm0.2Er0.2Yb02)B6 powders with the average particle size of 1.86 jim were found to possess the best EM wave absorption properties among these hexaborides.The RLmin value of(Ce0.2Y0.2Sm0.2Er0.2Yb0.2)B6 reaches-33.4 dB at 11.5 GHz at thickness of 2 mm;meanwhile,the optimized effective absorption bandwidth(EAB)is 3.9 GHz from 13.6 to 17.5 GHz with a thickness of 1.5 mm.The introduction of HE REB03(RE=Ce,Y,Sm,Eu,Er,Yb)as intermediate phase will give rise to the mismatching impedance,which will further lead to the reduction of reflection loss.Intriguingly,the HEREB6/HEREB03 still possess wide effective absorption bandwidth of 4.1 GHz with the relative low thickness of 1.7 mm.Considering the better stability,low density,and good EM wave absorption properties,HE REB6 ceramics are promising as a new type of EM wave absorbing materials.

Hierarchical composite of biomass derived magnetic carbon framework and phytic acid doped polyanilne with prominent electromagnetic wave absorption capacity

To solve the electromagnetic pollution,herein,a CoFe_(2)O_(4)/C/PANI composite was developed by a green route,which was constructed with spinel of metal oxide,graphitized carbon and conductive polymer composites.Benefiting from the designable interfaces and increased dipoles,the microwave dielectric response capability can be boosted significantly and resulted in the enhanced microwave absorbing performance.As revealed by the reflection loss curve,the minimum reflection loss(RLmin) reached-51.81 dB at 12.4 GHz under a matched thickness of 2.57 mm.At 2.5 mm,the effective absorbing band covered 8.88 GHz,suggesting the desirable wideband feature.In our case,the method of utilization of a novel green way to fabricate multiple-component EM absorber can be a promising candidate for high-performance EM absorber.

Illumination-dependent free carrier screening effect on the performance evolution of ZnO piezotronic strain sensor

Performance modulation of ZnO optoelectronic devices in the presence of proper piezoelectric polarization charges has been widely reported, whereas relatively less work has been performed about the influence of photoexcitation on piezotronics. In this stud~ we experimentally investigated the performance evolution of ZnO piezotronic strain sensor under various 365 nm UV irradiation densities. The device demonstrated a response ratio of -200 under no illumination and under -0.53% compressive strain, and the response time is approximately 0.3 s. However, tremendous performance degradation was observed with the increase in the illumination densi~, which is attributed to the W-modulated change in the free electron concentration and Schottky barrier height. It was observed that increased carrier density intensifies the screening effect and thus, the modulation ability of piezo-polarization charges weakens. Meanwhile, the deterioration of rectifying behavior at the interface under UV illumination also jeopardizes the device performance.

Energy Absorption and Deformation Mechanism of Lotus-type Porous Coppers in Perpendicular Direction

As metallic foams used for energy absorption in the automotive and aerospace industries, recently invented lotus-type porous metals are viewed as potential energy absorbers. Yet, solid conclusion on their eligibility as energy absorbers is still in question, particularly when compression is in the direction perpendicular to the axial orientation of cylindrical pores. In this work, the energy absorption of lotus-type porous coppers in the perpendicular direction is investigated at strain rates from 0.001 s^（-1） to^2400 s^（-1）. The energy absorption capacity and the energy absorption efficiency are calculated to be4–16 k J/kg and 0.32–0.7, respectively, slightly inferior to metal foams and the same porous solid compressed in the parallel direction due to the shortened extent of the plateau stress region. The deformation mechanism is examined experimentally in conjunction with finite element modeling. Both suggest that gradual squeeze and collapse of pores are the mechanisms accommodating the energy absorption. The deformation is generally evenly distributed over pore ligaments and independent of strain rate.