A regenerative absorption process for removal of SOx from FCC off-gas using LAS/ H2SO4 solution as absorbant was studied and pilot-plant experiments were carried out. A mass transfer- reaction model for the SO2 absorp...A regenerative absorption process for removal of SOx from FCC off-gas using LAS/ H2SO4 solution as absorbant was studied and pilot-plant experiments were carried out. A mass transfer- reaction model for the SO2 absorption process was established based on pilot-plant experiments, and the concentration distribution of components in the liquid film, and the partial pressure and mass transfer rate of SO2 along the height of the absorption tower, was calculated from this model. The numerical simulation results were compared with the experimental results and proved that the model can be used for describing the SO2 absorption process.展开更多
The hydroxyapatite/polylactide biocomposites were prepared by absorption process in liquid phase. The method avoided many disadvantages, such as inaterfusion of chemical impurity substances, nonuniformity dispersal o...The hydroxyapatite/polylactide biocomposites were prepared by absorption process in liquid phase. The method avoided many disadvantages, such as inaterfusion of chemical impurity substances, nonuniformity dispersal of HA in PLA, low molecular weight of PLA . HA particles were uniformly dispersed in PLA matrix, and showed well ndhesion with PLA matrix. The biocomposites have the higher mechanical properties and suitable decomposable capability.展开更多
High hydrogen absorption and desorption rates are two significant index parameters for the applications of hydrogen storage tanks.The analysis of the hydrogen absorption and desorption behavior using the isothermal ki...High hydrogen absorption and desorption rates are two significant index parameters for the applications of hydrogen storage tanks.The analysis of the hydrogen absorption and desorption behavior using the isothermal kinetic models is an efficient way to investigate the kinetic mechanism.Multitudinous kinetic models have been developed to describe the kinetic process.However,these kinetic models were de-duced based on some assumptions and only appropriate for specific kinetic measurement methods and rate-controlling steps(RCSs),which sometimes lead to confusion during application.The kinetic analysis procedures using these kinetic models,as well as the key kinetic parameters,are unclear for many researchers who are unfamiliar with this field.These problems will prevent the kinetic models and their analysis methods from revealing the kinetic mechanism of hydrogen storage alloys.Thus,this review mainly focuses on the summarization of kinetic models based on different kinetic measurement methods and RCSs for the chemisorption,surface penetration,diffusion of hydrogen,nucleation and growth,and chemical reaction processes.The analysis procedures of kinetic experimental data are expounded,as well as the effects of temperature,hydrogen pressure,and particle radius.The applications of the kinetic models for different hydrogen storage alloys are also introduced.展开更多
文摘A regenerative absorption process for removal of SOx from FCC off-gas using LAS/ H2SO4 solution as absorbant was studied and pilot-plant experiments were carried out. A mass transfer- reaction model for the SO2 absorption process was established based on pilot-plant experiments, and the concentration distribution of components in the liquid film, and the partial pressure and mass transfer rate of SO2 along the height of the absorption tower, was calculated from this model. The numerical simulation results were compared with the experimental results and proved that the model can be used for describing the SO2 absorption process.
文摘The hydroxyapatite/polylactide biocomposites were prepared by absorption process in liquid phase. The method avoided many disadvantages, such as inaterfusion of chemical impurity substances, nonuniformity dispersal of HA in PLA, low molecular weight of PLA . HA particles were uniformly dispersed in PLA matrix, and showed well ndhesion with PLA matrix. The biocomposites have the higher mechanical properties and suitable decomposable capability.
基金This work was financially supported by the Chongqing Special Key Project of Technology Innovation and Applica-tion Development,China(No.cstc2019jscx-dxwtB0029)the National Natural Science Foundation of China(Nos.51871143 and U2102212)+1 种基金the Science and Technology Committee of Shanghai,China(No.19010500400)the Shanghai Rising-Star Program(No.21QA1403200).
文摘High hydrogen absorption and desorption rates are two significant index parameters for the applications of hydrogen storage tanks.The analysis of the hydrogen absorption and desorption behavior using the isothermal kinetic models is an efficient way to investigate the kinetic mechanism.Multitudinous kinetic models have been developed to describe the kinetic process.However,these kinetic models were de-duced based on some assumptions and only appropriate for specific kinetic measurement methods and rate-controlling steps(RCSs),which sometimes lead to confusion during application.The kinetic analysis procedures using these kinetic models,as well as the key kinetic parameters,are unclear for many researchers who are unfamiliar with this field.These problems will prevent the kinetic models and their analysis methods from revealing the kinetic mechanism of hydrogen storage alloys.Thus,this review mainly focuses on the summarization of kinetic models based on different kinetic measurement methods and RCSs for the chemisorption,surface penetration,diffusion of hydrogen,nucleation and growth,and chemical reaction processes.The analysis procedures of kinetic experimental data are expounded,as well as the effects of temperature,hydrogen pressure,and particle radius.The applications of the kinetic models for different hydrogen storage alloys are also introduced.
