Vector accelerometer has attracted much attention for its great application potential in underground seismic signal measurement. We propose and demonstrate a novel vector accelerometer based on the three fiber Bragg g...Vector accelerometer has attracted much attention for its great application potential in underground seismic signal measurement. We propose and demonstrate a novel vector accelerometer based on the three fiber Bragg gratings(FBGs)embedded in a silicone rubber compliant cylinder at 120° distributed uniformly. The accelerometer is capable of detecting the orientation of vibration with a range of 0°–360° and the acceleration through monitoring the central wavelength shifts of three FBGs simultaneously. The experimental results show that the natural frequency of the accelerometer is about 85 Hz, and the sensitivity is 84.21 pm/g in the flat range of 20 Hz–60 Hz. Through experimental calibration, the designed accelerometer can accurately obtain vibration vector information, including vibration orientation and acceleration. In addition, the range of resonant frequency and sensitivity can be expanded by adjusting the hardness of the silicone rubber materials. Due to the characteristics of small size and orientation recognition, the accelerometer can be applied to low-frequency vibration acceleration vector measurement in narrow spaces.展开更多
<div style="text-align:justify;"> Error vector magnitude (EVM) as a performance metric for <em>M</em>-ary quadrature amplitude modulation (QAM) formats in optical coherent systems is presen...<div style="text-align:justify;"> Error vector magnitude (EVM) as a performance metric for <em>M</em>-ary quadrature amplitude modulation (QAM) formats in optical coherent systems is presented. It is shown that the calibrated BER, which would otherwise be under-estimated without the correction factor, can reliably monitor the performance of optical coherent systems near the target BER of 10<sup>-3</sup> for quadrature phase shift keying (QPSK), 16-QAM, and 64-QAM employing carrier phase recovery with differential decoding to compensate for laser phase noise. The impact on the number of symbols used to estimate the BER from EVM analysis is also presented and compared to the BER obtained by error counting. </div>展开更多
Purpose–Using the strong motion data ofK-net in Japan,the continuous magnitude prediction method based on support vector machine(SVM)was studied.Design/methodology/approach–In the range of 0.5–10.0 s after the P-wa...Purpose–Using the strong motion data ofK-net in Japan,the continuous magnitude prediction method based on support vector machine(SVM)was studied.Design/methodology/approach–In the range of 0.5–10.0 s after the P-wave arrival,the prediction time window was established at an interval of 0.5 s.12 P-wave characteristic parameters were selected as the model input parameters to construct the earthquake early warning(EEW)magnitude prediction model(SVM-HRM)for high-speed railway based on SVM.Findings–The magnitude prediction results of the SVM-HRM model were compared with the traditional magnitude prediction model and the high-speed railway EEW current norm.Results show that at the 3.0 s time window,themagnitude prediction error of the SVM-HRMmodel is obviously smaller than that of the traditionalτc method and Pd method.The overestimation of small earthquakes is obviously improved,and the construction of the model is not affected by epicenter distance,so it has generalization performance.For earthquake events with themagnitude range of 3–5,the single station realization rate of the SVM-HRMmodel reaches 95%at 0.5 s after the arrival of P-wave,which is better than the first alarm realization rate norm required by“The TestMethod of EEW andMonitoring Systemfor High-Speed Railway.”For earthquake eventswithmagnitudes ranging from3 to 5,5 to 7 and 7 to 8,the single station realization rate of the SVM-HRM model is at 0.5 s,1.5 s and 0.5 s after the P-wave arrival,respectively,which is better than the realization rate norm of multiple stations.Originality/value–At the latest,1.5 s after the P-wave arrival,the SVM-HRM model can issue the first earthquake alarm that meets the norm of magnitude prediction realization rate,which meets the accuracy and continuity requirements of high-speed railway EEW magnitude prediction.展开更多
In view of the problem that the current single-antenna GPS attitude determination system can only determine the body attitude when the sideslip angle is zero and the multiantenna GPS/SINS integrated navigation system ...In view of the problem that the current single-antenna GPS attitude determination system can only determine the body attitude when the sideslip angle is zero and the multiantenna GPS/SINS integrated navigation system is of large volume, high cost, and complex structure, this approach is presented to determine the attitude based on vector space with single-antenna GPS and accelerometers in the micro inertial measurement unit （MIMU）. It can provide real-time and accurate attitude information. Subsequently, the single-antenna GPS/SINS integrated navigation system is designed based on the combination of position, velocity, and attitude. Finally the semi- physical simulations of single-antenna GPS attitude determination system and single-antenna GPS/SINS integrated navigation system are carried out. The simulation results, based on measured data, show that the single-antenna GPS/SINS system can provide more accurate navigation information compared to the GPS/SINS system, based on the combination of position and velocity. Furthermore, the single-antenna GPS/SINS system is characteristic of lower cost and simpler structure. It provides the basis for the application of a single-antenna GPS/SINS integrated navigation system in a micro aerial vehicle （MAV）.展开更多
In this work a Support Vector Machine Regression（SVMR） algorithm is used to calculate local magnitude（MI） using only five seconds of signal after the P wave onset of one three component seismic station. This algor...In this work a Support Vector Machine Regression（SVMR） algorithm is used to calculate local magnitude（MI） using only five seconds of signal after the P wave onset of one three component seismic station. This algorithm was trained with 863 records of historical earthquakes, where the input regression parameters were an exponential function of the waveform envelope estimated by least squares and the maximum value of the observed waveform for each component in a single station. Ten-fold cross validation was applied for a normalized polynomial kernel obtaining the mean absolute error for different exponents and complexity parameters. The local magnitude（MI） could be estimated with 0.19 units of mean absolute error. The proposed algorithm is easy to implement in hardware and may be used directly after the field seismological sensor to generate fast decisions at seismological control centers, increasing the possibility of having an effective reaction.展开更多
The prediction of magnitude （M） of reservoir induced earthquake is an important task in earthquake engineering. In this article, we employ a Support Vector Machine （SVM） and Gaussian Process Regression （GPR） for...The prediction of magnitude （M） of reservoir induced earthquake is an important task in earthquake engineering. In this article, we employ a Support Vector Machine （SVM） and Gaussian Process Regression （GPR） for prediction of reservoir induced earthquake M based on reservoir parameters. Comprehensive parameter （E） and maximum reservoir depth] （H） are considered as inputs to the SVM and GPR. We give an equation for determination oil reservoir induced earthquake M. The developed SVM and GPR have been compared with] the Artificial Neural Network （ANN） method. The results show that the developed SVM and] GPR are efficient tools for prediction of reservoir induced earthquake M. /展开更多
针对移动终端接入用户和数据的特征难以准确判定,影响移动终端接入控制精准度的问题,提出一种基于EVM(Error Vector Magnitud)测量算法的接入控制技术。考虑到环境中噪声和其他干扰因素影响,以Qos(Quality of Srvice)条件为用户的初始...针对移动终端接入用户和数据的特征难以准确判定,影响移动终端接入控制精准度的问题,提出一种基于EVM(Error Vector Magnitud)测量算法的接入控制技术。考虑到环境中噪声和其他干扰因素影响,以Qos(Quality of Srvice)条件为用户的初始接入条件,计算满足该条件的用户或数据的特征,将特征值转换为权重因子作为接入控制参照。采用EVM测量算法计算终端信道内外信号间的差值,结合用户权重因子推导得到移动终端的接入门限,求解不同用户门限值与控制数值间递增和递减函数,按照函数的优先级顺序,实现移动终端接入的精准控制。实验数据证明,所提方法接入控制精准度高,控制后终端传输时延、阻塞率得到了明显的改善,数据到达率也有明显提升。展开更多
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 61927812, 61735014, and 62105261)。
文摘Vector accelerometer has attracted much attention for its great application potential in underground seismic signal measurement. We propose and demonstrate a novel vector accelerometer based on the three fiber Bragg gratings(FBGs)embedded in a silicone rubber compliant cylinder at 120° distributed uniformly. The accelerometer is capable of detecting the orientation of vibration with a range of 0°–360° and the acceleration through monitoring the central wavelength shifts of three FBGs simultaneously. The experimental results show that the natural frequency of the accelerometer is about 85 Hz, and the sensitivity is 84.21 pm/g in the flat range of 20 Hz–60 Hz. Through experimental calibration, the designed accelerometer can accurately obtain vibration vector information, including vibration orientation and acceleration. In addition, the range of resonant frequency and sensitivity can be expanded by adjusting the hardness of the silicone rubber materials. Due to the characteristics of small size and orientation recognition, the accelerometer can be applied to low-frequency vibration acceleration vector measurement in narrow spaces.
文摘<div style="text-align:justify;"> Error vector magnitude (EVM) as a performance metric for <em>M</em>-ary quadrature amplitude modulation (QAM) formats in optical coherent systems is presented. It is shown that the calibrated BER, which would otherwise be under-estimated without the correction factor, can reliably monitor the performance of optical coherent systems near the target BER of 10<sup>-3</sup> for quadrature phase shift keying (QPSK), 16-QAM, and 64-QAM employing carrier phase recovery with differential decoding to compensate for laser phase noise. The impact on the number of symbols used to estimate the BER from EVM analysis is also presented and compared to the BER obtained by error counting. </div>
基金supported by the National Natural Science Foundation of China(U2039209,U1534202,51408564)Natural Science Foundation of Heilongjiang Province(LH2021E119)the National Key Research and Development Program of China(2018YFC1504003).
文摘Purpose–Using the strong motion data ofK-net in Japan,the continuous magnitude prediction method based on support vector machine(SVM)was studied.Design/methodology/approach–In the range of 0.5–10.0 s after the P-wave arrival,the prediction time window was established at an interval of 0.5 s.12 P-wave characteristic parameters were selected as the model input parameters to construct the earthquake early warning(EEW)magnitude prediction model(SVM-HRM)for high-speed railway based on SVM.Findings–The magnitude prediction results of the SVM-HRM model were compared with the traditional magnitude prediction model and the high-speed railway EEW current norm.Results show that at the 3.0 s time window,themagnitude prediction error of the SVM-HRMmodel is obviously smaller than that of the traditionalτc method and Pd method.The overestimation of small earthquakes is obviously improved,and the construction of the model is not affected by epicenter distance,so it has generalization performance.For earthquake events with themagnitude range of 3–5,the single station realization rate of the SVM-HRMmodel reaches 95%at 0.5 s after the arrival of P-wave,which is better than the first alarm realization rate norm required by“The TestMethod of EEW andMonitoring Systemfor High-Speed Railway.”For earthquake eventswithmagnitudes ranging from3 to 5,5 to 7 and 7 to 8,the single station realization rate of the SVM-HRM model is at 0.5 s,1.5 s and 0.5 s after the P-wave arrival,respectively,which is better than the realization rate norm of multiple stations.Originality/value–At the latest,1.5 s after the P-wave arrival,the SVM-HRM model can issue the first earthquake alarm that meets the norm of magnitude prediction realization rate,which meets the accuracy and continuity requirements of high-speed railway EEW magnitude prediction.
基金the Astronautic Technology Foundation (HTZC0405)
文摘In view of the problem that the current single-antenna GPS attitude determination system can only determine the body attitude when the sideslip angle is zero and the multiantenna GPS/SINS integrated navigation system is of large volume, high cost, and complex structure, this approach is presented to determine the attitude based on vector space with single-antenna GPS and accelerometers in the micro inertial measurement unit （MIMU）. It can provide real-time and accurate attitude information. Subsequently, the single-antenna GPS/SINS integrated navigation system is designed based on the combination of position, velocity, and attitude. Finally the semi- physical simulations of single-antenna GPS attitude determination system and single-antenna GPS/SINS integrated navigation system are carried out. The simulation results, based on measured data, show that the single-antenna GPS/SINS system can provide more accurate navigation information compared to the GPS/SINS system, based on the combination of position and velocity. Furthermore, the single-antenna GPS/SINS system is characteristic of lower cost and simpler structure. It provides the basis for the application of a single-antenna GPS/SINS integrated navigation system in a micro aerial vehicle （MAV）.
文摘In this work a Support Vector Machine Regression（SVMR） algorithm is used to calculate local magnitude（MI） using only five seconds of signal after the P wave onset of one three component seismic station. This algorithm was trained with 863 records of historical earthquakes, where the input regression parameters were an exponential function of the waveform envelope estimated by least squares and the maximum value of the observed waveform for each component in a single station. Ten-fold cross validation was applied for a normalized polynomial kernel obtaining the mean absolute error for different exponents and complexity parameters. The local magnitude（MI） could be estimated with 0.19 units of mean absolute error. The proposed algorithm is easy to implement in hardware and may be used directly after the field seismological sensor to generate fast decisions at seismological control centers, increasing the possibility of having an effective reaction.
文摘The prediction of magnitude （M） of reservoir induced earthquake is an important task in earthquake engineering. In this article, we employ a Support Vector Machine （SVM） and Gaussian Process Regression （GPR） for prediction of reservoir induced earthquake M based on reservoir parameters. Comprehensive parameter （E） and maximum reservoir depth] （H） are considered as inputs to the SVM and GPR. We give an equation for determination oil reservoir induced earthquake M. The developed SVM and GPR have been compared with] the Artificial Neural Network （ANN） method. The results show that the developed SVM and] GPR are efficient tools for prediction of reservoir induced earthquake M. /
文摘针对移动终端接入用户和数据的特征难以准确判定,影响移动终端接入控制精准度的问题,提出一种基于EVM(Error Vector Magnitud)测量算法的接入控制技术。考虑到环境中噪声和其他干扰因素影响,以Qos(Quality of Srvice)条件为用户的初始接入条件,计算满足该条件的用户或数据的特征,将特征值转换为权重因子作为接入控制参照。采用EVM测量算法计算终端信道内外信号间的差值,结合用户权重因子推导得到移动终端的接入门限,求解不同用户门限值与控制数值间递增和递减函数,按照函数的优先级顺序,实现移动终端接入的精准控制。实验数据证明,所提方法接入控制精准度高,控制后终端传输时延、阻塞率得到了明显的改善,数据到达率也有明显提升。
