Low palladium content CeO_(2)/ZnO composite for acetone sensor with sub-second response prepared by ultrasonic method

In practical applications,noble metal doping is often used to prepare high performance gas sensors,but more noble metal doping will lead to higher preparation costs.In this study,CeO_(2)/ZnO-Pd with low palladium content was prepared by ultrasonic method with fast response and high selectivity for acetone sensing.With the same amount of palladium added,the selectivity coefficient of CeO_(2)/ZnO-Pd is 1.88 times higher than that of the stirred sensor.Compared with the pure PdO-doped CeO_(2)/ZnO-PdO material,the content of Pd in CeO_(2)/ZnO-PdO is about 30%of that in CeO_(2)/ZnO-PdO,but the selectivity coefficient for acetone is 2.56 times higher.The CeO_(2)/ZnO-Pd sensor has a higher response(22.54)to 50×10^(−6) acetone at 300℃and the selectivity coefficient is 2.57 times that of the CeO_(2)/ZnO sensor.The sensor has a sub-second response time(0.6 s)and still has a 2.36 response to 330×10^(−9) of acetone.Ultrasonic doping makes Pd particles smaller and increases the contact area with gas.Meanwhile,the composition of n-p-n heterojunction and the synergistic effect of Pd/PdO improve the sensor performance.It shows that ultrasonic Pd doping provides a way to improve the utilization rate of doped metals and prepare highly selective gas sensors.

Highly selective acetone sensor based on ternary Au/Fe_2O_3-ZnO synthesized via co-precipitation and microwave irradiation

Ternary Au/Fe2O3-ZnO gas-sensing materials were synthesized by combining co-precipitation and microwave irradiation process.The as-prepared Au/Fe2O3-ZnO was characterized with X-ray diffractometer and scanning electron microscope,and its gas-sensing performance was measured using a gas-sensor analysis system.The results show that the as-prepared products consist of hexagonal wurtzite ZnO,face-centered cubic gold nanoparticles and orthorhombic Fe2O3crystallines.The Au/Fe2O3-ZnO based sensor has a very high selectivity to ethanol and acetone,and also has high sensitivity(154)at a low working temperature(270°C)and an extremely fast response(1s)against acetone.It is found that the selectivity can be adjusted by Fe2O3content added in the ternary materials.It possesses a worth looking forward prospect to practical applications in acetone detecting and administrating field.

Acetone sensors for non-invasive diagnosis of diabetes based on metal-oxide-semiconductor materials

In recent years, clinical studies have found that acetone concentration in exhaled breath can be taken as a characteristic marker of diabetes. Metal-oxide-semiconductor (MOS) materials are widely used in acetone gas sensors due to their low cost, high sensitivity, fast response/recovery time, and easy integration. This paper reviews recent progress in acetone sensors based on MOS materials for diabetes diagnosis. The methods of improving the performance of acetone sensor have been explored for comparison, especially in high humidity conditions. We summarize the current excellent methods of preparations of sensors based on MOSs and hope to provide some help for the progress of acetone sensors in the diagnosis of diabetes.

Acetone Sensors Based on La^(3+) Doped ZnO Nano-rods Prepared by Solvothermal Method

La3＋ doped ZnO nano-rods with different doping concentration were prepared via solvothermal method.The doped ZnO nano-rods were characterized by X-ray diffraction（XRD） and scanning electron microscopy（SEM）,respectively.The effect of La3＋ doping on the gas-sensing properties was investigated.The results revealed that the sensor based on 6 mol% La3＋ doped ZnO nano-rods exhibited high response to dilute acetone,and the responses to 0.01×10-6 acetone reached 2.4 when operating at 425 ℃.The response time and the recovery time for 0.01×10-6 acetone were only 16 and 3 s,respectively.

SnO-SnO_(2) modified two-dimensional MXene Ti3C2Tx for acetone gas sensor working at room temperature

Acetone,as widely used reagents in industry and laboratories,are extremely harmful to the human.So the detection of acetone gas concentrations and leaks in special environments at room temperature is essential.Herein,the nanocomposite combining SnO-SnO_(2)(p-n junction)and Ti_(3)C_(2)T_(x) MXene was successfully synthesized by a one-step hydrothermal method.Because of the existence of a small amount of oxygen during the hydrothermal conditions,part of the p-type SnO was oxidized to n-type SnO_(2),forming in-situ p-n junctions on the surface of Sn O.The hamburger-like SnO-SnO_(2)/Ti_(3)C_(2)T_(x) sensor exhibited improved acetone gas sensing response of 12.1(R_(g)/R_(a))at room temperature,which were nearly 11 and 4 times higher than those of pristine Ti_(3)C_(2)T_(x) and pristine SnO-SnO_(2),respectively.Moreover,it expressed a short recovery time(9 s)and outstanding reproducibility.Because of the different work functions,the Schottky barrier was formed between the SnO and the Ti_(3)C_(2)T_(x) nanosheets,acting as a hole accumulation layer(HALs)between Ti_(3)C_(2)T_(x) and tin oxides.Herein,the sensing mechanism based on the formation of hetero-junctions and high conductivity of the metallic phase of Ti_(3)C_(2)T_(x) MXene in SnO-SnO_(2)/Ti_(3)C_(2)T_(x) sensors was discussed in detail.

Highly sensitive acetone gas sensor based on ultra-low content bimetallic PtCu modified WO3·H2O hollow sphere

Acetone is an important industrial raw material as well as biomarker in medical diagnosis.The detection of acetone has great significance for safety and health.However,high selectivity and low concentration(ppb level)detection remain challenges for semiconductor gas sensor.Herein,we present a novel sensitive material with bimetallic PtCu nanocrystal modified on WO3·H2O hollow spheres(HS),which shows high sensitivity,excellent selectivity,fast response/recovery speed and low limit of detection(LOD)to acetone detection.Noteworthy,the response(Ra/Rg)of WO3·H2O HS sensor increased by 9.5 times after modification with 0.02%bimetallic PtCu nanocrystals.The response of PtCu/WO3·H2O HS to 50 ppm acetone is as high as 204.9 with short response/recovery times(3.4 s/7.5 s).Finally,the gassensitivity mechanism was discussed based on gas sensitivity test results.This research will offer a new route for high efficient acetone detection.

Enhanced acetone sensing performance of nanostructured Sm2O3 doped SnO2 thick films

In the present work, we synthesized Sm2O3 doped SnO2 in order to prepare a selective acetone sensor with fast response, quick recovery and good repeatability. Pure as well as 2 mol.%, 4 mol.%, 6 mol.% and 8 mol.% Sm2O3 doped SnO2 nanostructured samples were synthesized by using a co-precipitation method. The characterization of the samples was done by thermogravimetric and differential thermo-gravimetric analysis（TG-DTA）, X-ray diffraction（XRD）, field emission gun-scanning electron microscopy（FEG-SEM）, energy dispersive analysis by X-rays（EDAX）, high resolution scanning electron microscopy（HR-TEM）, selected area X-ray diffraction（SAED）, Brunauer-Emmet-Teller（BET） and ultraviolet-visible-near infrared（UV-Vis-NIR） spectroscopy techniques. The gas response studies of liquid petroleum gas, ammonia, ethanol and acetone vapor were carried out. The results showed that Sm doping systematically lowered operating temperature and enhanced the gas response and selectivity for acetone. The response and recovery time for 6 mol.% Sm2O3 doped SnO2 thick film at the operating temperature of 250 °C were 15 and 24 s, respectively.