Preparation of lactic acid bacteria compound starter cultures based on pasting properties and its improvement of glutinous rice flour and dough

The effects of 5 lactic acid bacteria(LAB)fermentation on the pasting properties of glutinous rice flour were compared,and suitable fermentation strains were selected based on the changes of viscosity,setback value,and breakdown value to prepare LAB compound starter cultures.The results revealed that Latilactobacillus sakei HSD004 and Lacticaseibacillus rhamnosus HSD005 had apparent advantages in increasing the viscosity and reducing the setback and breakdown values of glutinous rice flour.In particular,the compound starter created using the two abovementioned LAB in the ratio of 3:1 had better performance than that using a single LAB in improving the pasting properties and increasing the water and oil absorption capacity of glutinous rice flour.Moreover,the gelatinization enthalpy of the fermented samples increased significantly.For frozen glutinous rice dough stored for 28 days,the viscoelasticity of frozen dough prepared by compound starter was better than that of control dough,and the freezable water content was lower than that of control dough.These results indicate that compound LAB fermentation is a promising technology in the glutinous rice-based food processing industry,which has significance for its application.

Boswellic acids: a review on its pharmacological properties, molecular mechanism and bioavailability

Boswellic acids is a general term for a series of pentacyclic triterpenoid compounds that are isolated from the oleogin resin of the Boswellia genus and serve as the main active ingredient.It exhibits a wide range of biological activities,such as anti-inflammatory,anti-cancer,antibacterial,antiviral,hepatoprotective,neuroprotective,anti-diabetic,and anti-thrombotic properties.As a result,it has gained significant recognition among practitioners of traditional Chinese and Indian medicine.These biological effects may be associated with multiple molecular targets and signal transduction pathways.However,the poor pharmacokinetic properties of the substance lead to lower bioavailability,which affects its effectiveness.To address this issue,scientists have proposed a number of strategies,such as solid dispersions,phytosome®technologies,and novel drug delivery systems.This article aims to provide a comprehensive overview for boswellic acids on the phytochemistry,molecular mechanisms,potential therapeutic applications,and strategies to improve bioavailability.

Comparative Study on the Acid-Base Indicator Properties of Natural Dye, Turmeric Rhizome (Curcuma longa) and Synthetic Dyes

Acid-Base Indicator, Turmeric Rhizome (Curcuma longa) was extracted from the root of a turmeric plant. The turmeric was peeled, washed and dried in an oven at 60°C. It was ground into powder and soaked in hot and cold ethanol for the extraction. The extract was filtered and part of it was concentrated to yield a reasonable quantity of turmeric indicator. On standardization of acid with a base, 0.05 M base respectively of Sodium hydroxide (NaOH), sodium carbonate (Na2CO3) and Disodium borate (B4Na2O7) were used. Hot and cold extracts of turmeric were used as indicators and were compared with methyl orange and phenolphthalein. On the preliminary test carried out, hot and cold turmeric indicator showed yellow colour in acid medium and orange colour in the base. Methyl orange showed red colour in acid but yellow in the base, phenolphthalein was colourless in acid but pink in the base. During titration there were colour changes at the end points in the entire test carried out. The average volumes at ends points were calculated, the molar concentrations and mass concentrations of the acids used were also determined. The results showed that there was no difference between the natural indicators used and the existing synthetic indicators which are toxic to our environment.

In-vitro digestibility,protein digestibility corrected amino acid,and sensory properties of banana-cassava gluten-free pasta with soy protein isolate and egg white protein addition

Soy protein isolate and egg white protein were added to cassava-banana gluten-free pasta and the effects on the nutritional quality,digestibility properties,protein digestibility corrected amino acid(PDCAA),and sensory acceptance of the pasta was observed.Banana-cassava composite flour(75:25)was blended with soy protein isolate or egg white protein at the following rates:0,5,10,and 15 g/100 g flour.Cooked pasta samples were analysed for total phenolic content(TPC),antioxidant activity,amino acid profiles,protein content,starch digestibility,protein digestibility and protein digestibility corrected amino acid score(PDCAAS).Addition of both proteins decreased starch digestibility,increased protein digestibility,improved the balance of the amino acid profile,and PDCAAS whereas only soy protein isolate enhanced the TPC and antioxidant capacity of the banana-cassava pasta.An egg white protein-fortified banana-cassava pasta had better customer acceptance and purchase intent than soy protein isolate inclusion.

Mechanical properties and damage constitutive model of sandstone after acid corrosion and high temperature treatments

Aiming at the problem of temperature-mechanics-chemical(T-M-C)action encountered by rocks in underground engineering,sandstone was selected as the sample for acid corrosion treatment at pH 1,3,5 and 7,the acid corrosion treated samples were then subjected to high-temperature experiments at 25,300,600,and 900℃,and triaxial compression experiments were conducted in the laboratory.The experimental results show that the superposition of chemical damage and thermal damage has a significant impact on the quality,wave velocity,porosity and compression failure characteristics of the rock.Based on the Lemaitre strain equivalent hypothesis theory,the damage degree of rock material was described by introducing damage variables,and the spatial mobilized plane(SMP)criterion was adopted.The damage constitutive model can well reflect the stress-strain characteristics of the rock triaxial compression process,which verified the rationality and reliability of the model parameters.The experiment and constitutive model analyzed the change law of mechanical properties of rock after chemical corrosion and high temperature thermal damage,which had certain practical significance for rock engineering construction.

Preparation and Properties of Vegetable-Oil-Based Thioether Polyol and Ethyl Cellulose Supramolecular Composite Films

Ethyl cellulose(EC),an important biomass-based material,has excellent film-forming properties.Nevertheless,the high interchain hydrogen bond interaction leads to a high glass transition temperature of EC,which makes it too brittle to be used widely.The hydroxyl group on EC can form a supramolecular system in the form of a non-covalent bond with an effective plasticizer.In this study,an important vegetable-oil-based derivative named dimer fatty acid was used to prepare a novel special plasticizer for EC.Dimer-fatty-acid-based thioether polyol(DATP)was synthesized and used to modify ethyl cellulose films.The supramolecular composite films of DATP and ethyl cellulose were designed using the newly-formed van der Waals force.The thermal stability,morphology,hydrophilicity,and mechanical properties of the composite films were all tested.Pure EC is fragile,and the addition of DATP makes the ethyl cellulose films more flexible.The elongation at the break of EC supramolecular films increased and the tensile strength decreased with the increasing DATP content.The elongation at the break of EC/DATP(60/40)and EC/DATP(50/50)was up to 40.3%and 43.4%,respectively.Noticeably,the thermal initial degradation temperature of the film with 10%DATP is higher than that of pure EC,which may be attributed to the formation of a better supramolecular system in this composite film.The application of bio-based material(EC)is environmentally friendly,and the novel DATP can be used as a special and effective plasticizer to prepare flexible EC films,making it more widely used in energy,chemical industry,materials,agriculture,medicine,and other fields.

Biodiesel Production from Rhynchophorus ferrugineus Larvae Oil: Physichochemical Properties and Acid Composition of Oil as Affected by Oil Extraction Protocol

Biodiesel, a renewable energy source made from natural oils and fats, can be produced using white raffia larvae as a raw material. These larvae have a high lipid content and a short life cycle, making them suitable for this purpose. One crucial step in biodiesel production is oil extraction, and this study aimed to investigate how the extraction protocol affects the fuel properties of the oil. To study the impact of solvent type, solvent volume, and residence time on oil yield, 200 grams of Rhynchophorus ferrugineus were used in a Soxhlet extractor. The researchers examined the physicochemical properties and fatty acid composition of the crude grease using the European biodiesel standard (EN14214) and gas chromatography methods, respectively. The study found that hexane as a solvent produced the highest oil yield (64.44%) during a four-hour extraction period with a solvent ratio of 300 ml. Furthermore, the hexane-extracted oil had the highest iodine number (3.02 g/100 g) and cetane number (55.69). These values indicate favorable properties for biodiesel production. The Rhynchophorus ferrugineus larvae oil proved to be a rich source of monounsaturated fatty acids (76%), which were found to be significantly affected by the solvent type. Based on quality assessment, Rhynchophorus ferrugineus can be suitable for biodiesel production. In summary, under the given operational conditions, hexane is the most suitable solvent for Rhynchophorus ferrugineus oil extraction for biodiesel production. Further research in optimizing the extraction process can contribute to the efficient utilization of renewable energy sources like white raffia larvae for biodiesel production.

Syntheses,Crystal Structures,and Magnetic Properties of Two Manganese(Ⅱ) Coordination Polymers Based on Bifunctional Pyridine-benzene Carboxylic Acids

Two manganese（II） coordination polymers, namely, {[Mn（PIP）（BIBP）]·（BIBP）0.5}n（1） and {[Mn（PTA）（BIMBP）（H2O）]·H2O（0.69）}n（2）（H2PIP = 5-（4-pyridyl）-isophthalic acid, H2 PTA =6-（4-pyridyl）-terephthalic acid, BIBP = 4,4？-bis（imidazol-1-yl）biphenyl, and BIMBP =4,4？-bis（imidazol-1-ylmethyl）biphenyl）, have been synthesized by using the bifunctional pyrinde-benzene carboxylic acids and bis（imidazole） linkers as mixed ligands to react with Mn SO4,and further characterized by elemental analysis, IR, and PXRD. Compound 1 is in the triclicnic system, space group P1 with a = 10.1089（8）, b = 13.1927（12）, c = 14.0638（12）A, α = 69.437（2）, β= 73.2890（10）, γ = 78.5320（10）o, V = 1671.9（2） A^3, Z = 2, Dc = 1.449 g/cm^3, F（000） = 705,μ（MoK α） = 0.453 mm^-1, S = 1.053, R = 0.0491 and wR = 0.1367 for 5837 unique reflections（Rint =0.0208） with I 〉 2σ（I）. Compound 2 belongs to the monoclicnic system, space group C2/c with a =15.199（3）, b = 19.731（3）, c = 21.537（5） ？, β = 105.228（3）o, V = 6232（2） A^3, Z = 8, Dc = 1.363g/cm^3, F（000） = 2648, μ（MoK α） = 0.475 mm^-1, S = 1.048, R = 0.0489 and wR = 0.1151 for 7414 unique reflections（Rint = 0.0425） with I 〉 2σ（I）. Structural analyses reveal that complex 1 is a4-connected（44.62）-sql bilayer structure with binuclear [Mn2（COO）2] SBU, while complex 2 is a normally（3,5）-connected（42.67.8）（42.6）-3,5L2 monolayer. And the sheets interacted with the adjacent sheets through weak interactions, finally giving a stable three-dimensional（3D）supramolecule. Besides, the variable-temperature magnetic susceptibility measurement of complex1 was investigated.

Two Dehydroabietic Acid-based Arylamines: Synthesis, Crystal Structure and Fluorescent Properties

Two dehydroabietic acid-based arylamines have been synthesized and characterized by FTIR, 1H NMR, 13C NMR, MS spectra and elemental analysis. Their spatial structures were determined by X-ray diffraction analysis. UV-Vis absorption and fluorescence spectral characteristics of these compounds in methanol were investigated. Their fluorescence emission spectra in different polarity solvents were further evaluated. Fluorescent properties and structural relationship of the compounds showed that fluorescence intensity and quantum yield inversely increase with the non-coplanar degree. In addition, the solvent polarity has different effects on the fluorescence emission spectra of two compounds.

Use of Poly-Lactic Acid (PLA) to Enhance Properties of Paper Based on Recycled Pulp

Nowadays, recycled paper is broadly used due to environmental reasons. Furthermore, the addition of starch as a dry strength additive improves the properties of recycled paper. Poly-Lactic Acid (PLA), a product from bio-refinery process, has recently been shown to act as a promising strength additive that could be used in combination with starch to further improve the strength of paper. In this study, the use of PLA of three molecular weights (MW) in combination with four different starches was investigated. Three recycled pulps from different origins, with the kappa number of 27.9 to 66 were used. Paper handsheets were made, and selected paper properties were tested. The results indicate that handsheets properties were influenced by the MW of PLAs, the type of starch used, and the lignin content of the pulp. The paper handsheets made from lignin-rich pulp (pulp A, kappa number 66), combined with 0.1% medium MW PLA (PLA_1) and 0.9% cationic starch containing 0.43% N gave the highest improvement for tensile strength, wet tensile strength, air and water resistance. This result verifies that a higher kappa number pulp has better attraction to the hydrophobic PLA. Moreover, the higher charge cationic starch led to higher tensile strength due to the increase of affinity to the anionic fiber surface. Interestingly, results show that amphoteric starch is a promising substitute for high cationic charge starch when combined with the medium MW PLA to improve tensile strength of paper. This study demonstrated that a starch-PLA blend represents a promising approach in improving properties of recycled paper.

Synthesis and Properties of Lactic Acid-based Cross-linked Poly(ester-amide)

A novel lactic acid-based cross-linked poly（ester-amide） （LCPEA） was synthesized. The gel fraction of the LCPEA could be modulated by the reaction conditions and it affected the mechanical and thermal properties of the LCPEA. The tensile strength, elastic modulus and bend strength of the LCPEA of 65% gel fraction were 4.65, 136.55 and 39.63 MPa, respectively. The thermal decomposition temperature （50 wt%） of the LCPEA was around 410℃.

Spectroscopic study on variations in illite surface properties after acid-base titration

FT IR, Raman microscopy, XRD, 29 Si and 27 Al MAS NMR, were used to investigate changes in surface properties of a natural illite sample after acid base potentiometric titration. The characteristic XRD lines indicated the presence of surface Al Si complexes, preferable to Al(OH) 3 precipitates. In the microscopic Raman spectra, the vibration peaks of Si O and Al O bonds diminished as a result of treatment with acid, then increased after hydroxide back titration. The varied ratio of signal intensity between IV Al and VI Al species in 27 Al MAS NMR spectra, together with the stable BET surface area after acidimetric titration, suggested that edge faces and basal planes in the layer structure of illite participated in dissolution of structural components. The combined spectroscopic evidence demonstrated that the reactions between illite surfaces and acid leaching silicic acid and aluminum ions should be considered in the model description of surface acid base properties of the aqueous illite.

Syntheses, Structures and Properties of Three Novel La(Ⅲ)/Co(Ⅱ) Coordination Polymers Based on 5-(3-(Tetrazo-5-yl)phenyl)isophthalic Acid

Three novel complexes, namely {[La(tapipa)(4,4′-bibp)·(H2O)2]·H2O}n(1),{[La-(tapipa)(H2O)4(OH)]·3 H2O}n(2),[Co(tapipa)(1,4-bbib)]n(3)(tapipa = 5-(3-(tetrazo-5-yl)phenyl)isophthalic acid, 4,4′-bibp = 4,4′-bis(imidazolyl)biphenyl, and 1,4-bbib = 1,4-bis(benzimidazo-1-ly)benzene) have been synthesized under solvothermal conditions and characterized by PXRD, IR,TGA, and so on. Complex 1 presents a 2 D layer structure, which is finally packed into a 3 D supramolecular structure by means of hydrogen bonds;complexes 2 and 3 exhibit 1 D chains and 2 D wavy-type structures, respectively, which are expanded into 3 D supramolecular structures through hydrogen bonds and π-π interactions. Furthermore, the luminescence properties of complex 1 and the variable-temperature magnetic susceptibilities of 3 were investigated. Complex 1 has highly selective sensing for Fe^3+ and Cr2O7^2- ions.

A New 3D Pb(Ⅱ) Coordination Polymer [Pb(L)]_n Based on a Long Flexible Octane-1,8-dicarboxylic Acid:Crystal Structure and Physical Properties

A new Pb（II）-based coordination polymer, [Pb（L）]n （1）, was hydrothermally synthesized and its structure was determined by single-crystal X-ray diffraction （H2L = octane- 1,8-dicarboxylic acid）. Compound 1 crystallizes in orthorhombic, space group Pnma with a = 32.061（4）, b = 7.2597（8）, c = 4.8084（5） A, V= 1119.2（2） A3, Z = 4, C10H1604Pb, Mr = 407.42, Dc = 2.418 g/cm3, F（000） = 760, μ（MoKa） = 15.066 mm-1, R = 0.0270 and wR = 0.0666. In 1, each Pb（II） cation is coordinated by six carboxylate oxygen atoms from four L2- anions. Each L2- anion bridges three Pb（ll） atoms in a μ3：η2：η1：η1 mode to form a 3D framework. The structure of 1 was characterized by IR spectrum and thermogravimetric analysis. Moreover, solid state luminescent property of 1 was also investigated.

Synthesis, Crystal Structure and Luminescence Properties of a Cadmium(Ⅱ) Complex Based on 2-Hydroxy-6-methylisonicotinic Acid

A new cadmium（Ⅱ） complex[Cd（Hminic）（IP）]n（1,Hminic = 2-hydroxy-6-methylisonicotinic acid,IP = imidazo[4,5-f]-l,10-phenanthroline）,has been synthesized by the reaction of a Hminic and auxiliary N-containing ligands with Cd（Ⅱ） ion under hydrothermal conditions.The complex was studied by elemental analysis,IR spectroscopy and X-ray crystallography.It is formulated as C（20）H（13）CdN5O3,crystallizes in monoclinic system,space group C2/c with α=9.6764（8）,b = 26.767（2）,c = 14.1332（11） A and β= 97.4510（10）°.V= 3629.7（5） A^3,Z = 8,Mr=483.75,Dc = 1.770 g/cm^3,F（000） = 1484 and μ= 1.237 mm^（-1）.The final refinement gave R = 0.0309 and wR = 0.0703 for 4151 reflections with I 〉2σ（I）.In the structure of 1,two Cd（Ⅱ） atoms are joined by a pair of μ2-hydroxyl oxygen atoms giving rise to a dinuclear Cd（Ⅱ） unit which is bridged by Hminic linkers to form a 1D ladder-like polymer chain.The chelating ligand IP coordinated to the Cd（Ⅱ） atom,and alternately attached to both sides of the ladder-like polymer chain.Adjacent chains are further bound together by strong intermolecular hydrogen bonds and face-to-face π…πinteractions,resulting in the formation of a 3D supramolecular architecture.Furthermore,the thermal stability and luminescent properties of this complex and the free ligands have been investigated.

Synthesis and Interfacial Properties of Bio-Based Zwitterionic Surfactants Derived from Different Fatty Acids in Non-Edible Vegetable Oils

Waste cooking oils and non-edible vegetable oils are abundant and renewable resources for bio-based materials which have showed great potential applications in many industries.In this study,five fatty acids commonly found in non-edible vegetable oils,including palmitic acid,stearic acid,linoleic acid,linolenic acid,ricinoleic acid,and their mixtures,were used to produce bio-based zwitterionic surfactants through a facile and high-yield chemical modification.These surfactants demonstrated excellent surface/interfacial properties with the minimum surface tensions ranging from 28.4 mN/m to 32.8 mN/m in aqueous solutions.The interfacial tensions between crude oil and surfactant solutions were remarkably reduced to lower values ranging from 0.0028 mN/m to 0.1983 mN/m without the aid of extra alkali,which particularly implied a great potential application in enhanced oil recovery.Meanwhile,these bio-based surfactants also showed good wetting properties(contact angles of~51°comparing with that of double distilled water,92.04°)and appropriate predicted biodegradability(degradation order of“weeks”for bio-based surfactants synthesized from saturated fatty acids,and“months”for those synthesized from unsaturated fatty acids).Bio-based surfactants synthesized from unsaturated fatty acids showed better interfacial properties in reducing interfacial tension between crude oil and formation water.The bio-based surfactants presented in this study are alternative substitutes for traditional petroleum-based surfactants in various surfactant application fields.

Acid-base and lipophilic properties of peptide nucleic acid derivatives

The first combined experimental and theoretical study on the ionization and lipophilic properties of peptide nucleic acid(PNA)derivatives,including eleven PNA monomers and two PNA decamers,is described.The acidity constants(pKa)of individual acidic and basic centers of PNA monomers were measured by automated potentiometric pH titrations in water/methanol solution,and these values were found to be in agreement with those obtained by MoKa software.These results indicate that single nucleobases do not change their pKa values when included in PNA monomers and oligomers.In addition,immobilized artificial membrane chromatography was employed to evaluate the lipophilic properties of PNA monomers and oligomers,which showed the PNA derivatives had poor affinity towards membrane phospholipids,and confirmed their scarce cell penetrating ability.Overall,our study not only is of potential relevance to evaluate the pharmacokinetic properties of PNA,but also constitutes a reliable basis to properly modify PNA to obtain mimics with enhanced cell penetration properties.

Flexible Bis(benzimidazole)-based Ligands Directed the Structure Characteristics of Coordination Polymers Based on Diphenic Acid Co-ligands:Syntheses, Structures and Properties

Two new coordination polymers [Cu_2(bbim)(dpa)_2(C_2H_5OH)_2](1), [Co(dpa)_2(bbbm)](2)(H_2dpa = diphenic acid, bbim = 1,1?-(1,6-hexanediyl)bis-1H-benzimidazole, bbbm = 1,1?-(1,4-butanediyl)bis-1 H-benzimidazole) constructed from bis(benzimidazole)-based ligands with different lengths and diphenic acid co-ligand have been synthesized under solvothermal conditions.Complex 1 possesses Cu-dpa helical chains. The adjacent chains are connected by the bbim ligands into two-dimensional(2D) 3-connected(63) topology. Differently, the layer structure of 2 was consisted by one-dimensional chains containing alternated 8-and 18-membered rings. Furthermore,the thermal stability and fluorescence property for all crystalline materials have been investigated.

Structures and Photoluminescent Properties of Two Complexes Based on Dipyrido[3,2-a：2？,3？-c]phenazine and 2,4＇-Biphenyldicarboxylic Acid

ABSTRAC Two new complexes [Cd（2,4＇-bpdc）（DPPZ）]2n·n H2O（1） and [Zn（2,4＇-Hbpdc）2（DPPZ）]· H2O（DPPZ = dipyrido[3,2-a：2＇,3＇-c]phenazine, 2,4＇-H2bpdc = 2,4＇-biphenyldicarboxylic acid） have been hydrothermally synthesized. The structure of complex 1 was determined by single-crystal X-ray diffraction diffraction and further characterized by elemental analysis, IR spectrum, powder X-ray diffraction（XRD） and single-crystal X-ray diffraction. Complex 1 has 1D chains, which are further connected by π-π stacking interactions of neighbouring chains, generating a steady 3D supramolecular structure. Complex 2 shows the isolated mononuclear units, which are further extended to a 2D supramolecular layered structure through π-π stacking interactions and hydrogen bonds. Furthermore, complexes 1 and 2 exhibit green photoluminescent properties at room temperature.

Acid-base and Electron Donor Properties of Pr_6O_(11)and Its Mixtures with Alumina

The electron donor properties of Pr6O11 activated at 300, 500 and 800℃ are reported from the studies on adsorption of electron acceptors of various electron affinity (7, 7, 8, 8-tetracyanoquinodimethane , 2. 3. 5. 6-tetrachloro-1, 4-benzoquin one, p-dinitrobenzene, and m-dinitrobenzcne) in three solvents (acetonitrile, 1,4-dioxan and ethyl acetate). The extent of electron transfer during adsorption is understood from magnetic measurements and ESR spectral data. The corresponding data on mixed oxides of Pr and Al are reported for various compositions. The acid / base properties of these oxides are determined using a set of Hammett indicators.