Corrosion properties of stainless steel 316L/Ni-Cu-P coatings in warm acidic solution

In order to improve corrosion resistance of stainless steel 316L in warm acidic solution, Ni？Cu？P coatings with high copper and phosphorus contents were deposited onto stainless steel 316L substrates via electroless plating. The structure of the film and its resistance to corrosion in a warm acidic environment were investigated using scanning electron microscopy （SEM）, energy dispersive spectroscopy （EDS）, X-ray diffraction spectrometry （XRD）, polarization curves, electrochemical impedance spectroscopy （EIS）, and dipping corrosion tests, respectively. The results demonstrate that Ni？Cu？P coatings consist of two types of nodules, which are 19.98% Cu and 39.17% Cu （mass fraction） respectively. The corrosion resistance of the 316L substrate when subjected to a warm acidic solution is significantly improved by the addition of the new type of the Ni？Cu？P coating. The as-plated coatings demonstrate better corrosion resistance than annealed coatings. As-plated coatings and those annealed at 673 K are found to corrode selectively, while pitting is observed to be the main corrosion mechanism of coatings annealed at 773 and 873 K.

Dancing bubble sonoluminescence in phosphoric acid solution

Sonoluminescence is more distinctly observed in phosphoric and sulfuric acid,which exhibit high viscosity and lower vapor pressures relative to water.Within an 85-wt%phosphoric acid solution saturated with argon(Ar),variations in the light-emitting regimes of bubbles were noted to correspond with increments in the driving acoustic intensity.Specifically,the bubbles were observed to perform a dance-like motion 2 cm below the multi-bubble sonoluminescence(MBSL)cluster,traversing a 25-mm^(2) grid during the camera exposure period.Spectral analysis conducted at the beginning of the experiment showed a gradual attenuation of CN(B^(2)S–X^(2)S)emission concurrent with a strengthening of Ar(4p–4s)atom emission lines.The application of a theoretical temperature model to the spectral data revealed that the internal temperature of the bubbles escalates swiftly upon their implosion.This study is instrumental in advancing the comprehension of the underlying mechanisms of sonoluminescence and in the formulation of a dynamic model for the behavior of the bubbles.

Direct extraction of Mo(VI) from acidic leach solution of molybdenite ore by ion exchange resin:Batch and column adsorption studies

The adsorption behavior of ion exchange resin D301 in the extraction of hexavalent molybdenum from high acidic leach solution was investigated. SEM, EDS and Raman spectra analyses were applied to studying the adsorption capacity, reaction kinetics and possible adsorption mechanism in detail. Results showed that the adsorption capacity of D301 resin for molybdenum from high acidic leach solution was up to 463.63 mg/g. Results of the kinetic analysis indicated that the adsorption process was controlled by the particle diffusion with the activation energy 25.47 k J/mol（0.9-1.2 mm） and 20.38 k J/mol（0.6-0.9 mm）. Furthermore, the molybdenum loaded on the resin could be eluted by using 2 mol/L ammonia hydroxide solution. Besides, dynamic continuous column experiments verified direct extraction of molybdenum from acidic leach solutions by ion exchange resin D301 and the upstream flow improved dynamic continuous absorption.

Microwave-induced synthesis and characterization of nanometer Ce_(0.5)Zr_(0.5)O_2 solid solution for the acidic catalytic reaction

Ce0.5Zr0.5O2 solid solution was successfully synthesized using cerium nitrate, zirconium nitrate, and urea as raw materials by the microwave irradiation method and characterized by X-ray diffraction, fluorescence spectrum, transmission electron microscopy, and infrared spectrum. Its acid catalytic activity was evaluated in the esterification reaction of acetic acid and n-butyl alcohol. The results show that Ce0.5Zr0.5O2 solid solution has cubic fluorite structure, and its particle diameter is in the nanometer scale. As a sort of solid acid, it possesses a higher acid catalytic activity and can be easily separated from reaction liquids. It can be used for several times, and basically, its activity keeps constant. The proton acid sites and Lewis acid sites exist in the structure of Ce0.5Zr0.5O2 solid solution.

Ion-pair induced solvent extraction of lithium(Ⅰ)from acidic chloride solutions with tributyl phosphate

Lithium(Li)is an important energy metal in the 21st century.However,the selective recovery of Li is still a big challenge,especially from acidic solutions with multiple metal ions existence.Herein we report a new ion pair induced mechanism for selectively extracting Li^(+)from acidic chloride solutions by tributyl phosphate(TBP).It is shown that the acidity and the chloride ions in the aqueous phase have great effects on the extraction of Li^(+).The FT-IR,UV-Vis and ESI-MS experiments provide solid evidence for the formation of ion-pair complex[Li(TBP)_n(H_(2)O)_(m)]^(+)[FeCl_(4)]^(-)(n-1,2,3;m-0,1)in the organic phase,which brings about the effective and efficient extraction of Li^(+).This mechanism can overcome the Hofmeister bias and allow for the selective extraction of Li^(+) from the extremely hydrophilic chlorides.It has also been proved that the loaded Li in TBP can be effectively stripped by concentrated HCl solution with a Li/Fe separation factor>500.The understanding of the ion-pair transport mechanism is helpful for optimizing the recovery process or further advancing more efficient recovery techniques for Li from acidic liquor.

Corrosion Protection of Iron Alloy Using <i>Peganum harmala </i>Extract as Inhibitor in Acidic Solution

This work describes the inhibition effect of different concentration of an aqueous extracted of Peganum harmala seed on the corrosion of carbon steel in 1 M H2SO4 solution using potentiostatic polarization techniques at the temperature range (298 - 328) K. The result showed that the inhibition efficiency increased with increasing of extract inhibitor concentration and temperature. The adsorption of inhibitor on carbon steel surface was fit into Langmuir adsorption isotherm. Kinetic and thermodynamic parameters governing the corrosion and the adsorption process were calculated and discussed.

Corrosion behavior of Hastelloy C22 coating produced by laser cladding in static and cavitation acid solution

The Hastelloy C22 coatings on Q235 steel substrate were produced by high power diode laser cladding technique. Their corrosion behaviors in static and cavitation hydrochloric, sulfuric and nitric acid solutions were investigated. The electrochemical results show that corrosion resistance of coatings in static acid solutions is higher than that in cavitation ones. In each case, coating corrosion resistance in descending order is in nitric, sulfuric and hydrochloric acid solutions. Obvious erosion-corrosion morphology and serious intercrystalline corrosion of coating are noticed in cavitation hydrochloric acid solution. This is mainly ascribed to the aggressive ions in hydrochloric acid solution and mechanical effect from cavitation bubbles collapse. While coating after corrosion test in cavitation nitric acid solution shows nearly unchanged surface morphology. The results indicate that the associated action of cavitation and property of acid solution determines the corrosion development of coating. Hastelloy C22 coating exhibits better corrosion resistance in oxidizing acid solution for the stable formation of dense oxide film on the surface.

Preparation of Cu nanoparticles with ascorbic acid by aqueous solution reduction method

Cu nanoparticles were prepared by reducing Cu2＋ ions with ascorbic acid through aqueous solution reduction method. The effects of solution pH and average size of Cu2O particles on the preparation of Cu nanoparticles were investigated. Cu particles were prepared at pH 3, 5 or 7, with the smallest Cu particles obtained at pH 7. However, Cu particles could not be prepared at pH 9 or 11. The average size of Cu2O particles can affect that of Cu particles. Larger Cu2O particles result in larger Cu particles. In addition, experiments were conducted to explore the reaction process by measuring the X-ray diffraction （XRD） patterns of specimens collected at different time points during the reaction. It was found that Cu（OH）2 was initially formed as a precursor, followed by the formation of Cu2O, which was finally reduced to Cu particles.

Photodegradation of α-naphthaleneacetic acid in aqueous solution

Kinetic processes of a-naphthaleneacetic acid (NAA) photolysis were studied under different conditions. The results showed that the ultraviolet light was more effective than fluorescent light in promoting degradation, and the degradation of NAA under ultraviolet light followed the first order kinetics with the photolysis rate constant of 1.15 x 10-2 min-1 and half-life time (t1/2) of 60 min. Further, it was proved that the photolysis rate was higher in the presence of oxygen, titanium dioxide (TiO2), and low pH (acidic solution). At last, two photolysis intermediates were identified by GC-MS and possible photolysis pathways were proposed.

Solvent extraction of vanadium from sulfuric acid solution

The behaviour of vanadium（V） extracted from sulfuric acid solution was investigated using Cyanex 923 as an extractant. The effects of the concentration of Cyanex 923 and the pH of the solution were studied. The extraction of vanadium（V） increases with the increase of Cyanex 923 concentration and shaking time. Cyanex 923 can extract vanadium（V） from sulfuric acid solution at low pH conditions, and the best pH conditions for extraction of vanadium（V） are at pH 1.0-2.0. The species extracted into the organic phase is VO2HSO4 with one molecule of Cyanex 923. Equilibrium studies were used to assess the extraction efficiency of vanadium（V） recovery from the sulfuric acid solution.

Electrochemical Corrosion Behavior of Nd-Fe-B Sintered Magnets in Different Acid Solutions

Electrochemical corrosion behavior of Nd-Fe-B sintered magnets in nitric acid, hydrochloric acid, sulfuric acid, phosphate acid and in oxalic acid was studied. Potentiodynamic polarization curves and immersion time dependence of corrosion rates of Nd-Fe-B sintered magnets in different acid solutions were tested. Microstructures of corroded Nd-Fe-B sintered magnets were investigated by means of SEM and AFM. The results indicate that in strong acid solutions of similar hydrogen ion concentration, the corrosion current increases in the order of HCl 〉 H3SO4 〉 HNO3 solution and Nd-Fe-B sintered magnets are passivated in phosphate acid and oxalic acid. Within 25 min, the corrosion rates of Nd-Fe-B sintered magnets in H2SO4 and H3PO4 solutions show a declining trend with immersion time, while in HNO3 and HCl solutions the corrosion rates are rising. And in H2C2O4 solution, weight of the magnets increases. The brim of Nd-Fe-B sintered magnets is corroded rather seriously and the size of the magnets changed greatly in nitric acid. The surfaces of the corroded magnets in the above mentioned acid solutions are all coarse.

Alpha radiolysis of nitric acid aqueous solution irradiated by 238Pu source

Alpha radiolysis of nitric acid aqueous solution by a ^(238)Pu source is investigated experimentally and theoretically.The time dependence of the nitrous acid yield on dose rate,nitric acid concentration,and nitrate ion concentration is studied.A novel kinetic model for the α-radiolysis of nitric acid aqueous solution is established,by considering the direct and indirect effects.The simulation results agree well with the experimental data,indicating the validity of our model to treat the reaction paths for generation and consumption of nitrous acid.It is shown that the redox reactions involving Pu cannot be neglected in theα-radiolysis of the solution.The results provide a better understanding of the α-ray radiolysis of aqueous nitric acid.

Formation and Oxidation of Hydrogen Molybdenum Bronze on Platinum Electrode in Sulfuric Acid Solution

Hydrogen molybdenum bronze (HxMoO3) can be electrodeposited on platinum and oxidized in two steps to the hydrogen molybdenum bronze with less amount of hydrogen HyMoO3 (y<x) and MoO3 when platinum electrode is cycled from -0.2 to 1.3V (vs. SCE) in 0.05 mol/L Na2MoO4 + 0.5 mol/L H2SO4 solution. During the formation of HxMoO3, the electrochemical reduction of molybdate existing in the form of polymolydate is reversible and is about a five-electron transfer reaction.

One-pot degradation of cellulose into carbon dots and organic acids in its homogeneous aqueous solution

As the abundant biopolymer, cellulose can be used as a feedstock for chemicals and materials. Effective conversion of cellulose by simple processes is a key point. Degradation of cellulose in its homogeneous solution is attractive for the molecular chains are free and spread. Here,microcrystalline cellulose was first dissolved in aqueous solution of Na OH and urea, and then hydrothermal reaction was carried out at various temperature and time. Fluorescence carbon dots(CDs) were generated accompanied with six organic acids: oxalic acid, formic acid, malonic acid, lactic acid, acetic acid, and fumaric acid. The yields of all organic acids and CDs, and the fluorescence quantum yield(QY) of CDs were studied at different reaction conditions. It was found that the maximum yield of organic acids and CDs are 80.1% and 6.03%, respectively, and the highest QY of the CDs is 10.9%. Fluorescence studies reveal that the as-prepared CDs has efficient selectivity and sensitivity toward iron ions in acidic condition, indicating it is a potential fluorescent sensor to the detection of Fe3+. Importantly, it provides a panorama to summary the degradation routes of cellulose in its homogeneous aqueous solution with both organic molecules and CDs as products.

Effects of applied potential on the stress corrosion cracking behavior of 7003 aluminum alloy in acid and alkaline chloride solutions

Potentiodynamic polarization tests and slow strain rate test（SSRT） in combination with fracture morphology observations were conducted to investigate the stress corrosion cracking（SCC） behavior of 7003 aluminum alloy（AA7003） in acid and alkaline chloride solutions under various applied potentials（Ea）. The results show that AA7003 is to a certain extent susceptible to SCC via anodic dissolution（AD） at open-circuit potential（OCP） and is highly susceptible to hydrogen embrittlement（HE） at high negative Ea in the solutions with p H levels of 4 and 11. The susceptibility increases with negative shift in the potential when Ea is less than-1000 m V vs. SCE. However, the susceptibility distinctly decreases because of the inhibition of AD when Ea is equal to-1000 m V vs. SCE. In addition, the SCC susceptibility of AA7003 in the acid chloride solution is higher than that in the alkaline solution at each potential. Moreover, the effect of hydrogen on SCC increases with increasing hydrogen ion concentration.

Study on Effects of Organic Nutrient Solution on Amino Acid Contents in Litchi (Litchi chinensis Sonn.) Fruit

[Objectives] This study was conducted to investigate the effect of organic nutrient solution on litchi quality. [Methods] Different concentrations of organic nutrient solutions were sprayed on litchi leaves to study their effects on amino acid contents in the fruit of litchi cultivar "Qinzhouhongli". [Results] The results showed that the organic nutrient solution could significantly promote the growth of litchi fruit at various development stages and improve fruit quality by spraying the organic nutrient solution for 3 times with a dilution concentration of 500-1 500 times during fruit development(at an interval of 15 d) of litchi. It could increase the total essential amino acid, total semi-essential amino acid, lysine, phenylalanine, threonine, methionine, valine, leucine, histidine, arginine, aspartic acid, glycine, serine, proline, alanine and tyrosine contents. Spraying the organic nutrient solution with a dilution concentration of 1 000 times achieved the best effect of promoting the growth and improving quality of litchi fruit. [Conclusions] This study provides a theoretical basis for high-quality production and nutritional quality evaluation of litchi and the development of functional processed litchi products.

Corrosion Inhibition of Carbon Steel in Hot Hydrochloric Acid Solutions

The dissolution of carbon steel in 5% HCl in the temperature range of 30~90℃ was inhibited by two organic compounds having the general formula: ClR NH2(CH2)n NH2 RCl where R is a benzyl group. The behaviour of these inhibitors in acidic medium were investigated using weight loss method, open circuit potential and linear polarization technique. These inhibitors provided satisfactory corrosion inhibition for carbon steel in hydrochloric acid solutions even at higher temperature and acid concentration (10%). The electrochemical results showed that the polarization resistance (Rp) values increased with increasing inhibitor concentration, also the corrosion current decreased and a higher inhibition efficiency was obtained. The protective properties of these two organic inhibitors were attributed to the chemisorption mechanism

A robust predictive tool for estimating CO2 solubility in potassium based amino acid salt solutions

The acid gas absorption in four potassium based amino acid salt solutions was predicted using artificial neural network(ANN). Two hundred fifty-five experimental data points for CO_2 absorption in the four potassium based amino acid salt solutions containing potassium lysinate, potassium prolinate, potassium glycinate, and potassium taurate were used in this modeling. Amine salt solution's type, temperature, equilibrium partial pressure of acid gas, the molar concentration of the solution, molecular weight, and the boiling point were considered as inputs to ANN to prognosticate the capacity of amino acid salt solution to absorb acid gas. Regression analysis was employed to assess the performance of the network. Levenberg–Marquardt back-propagation algorithm was used to train the optimal ANN with 5:12:1 architecture. The model findings indicated that the proposed ANN has the capability to predict precisely the absorption of acid gases in various amino acid salt solutions with Mean Square Error(MSE) value of 0.0011, the Average Absolute Relative Deviation(AARD) percent of 5.54%,and the correlation coefficient(R^2) of 0.9828.

Development of Better-Quality Assay Method for the Citric Acid and Sodium Citrate in Ophthalmic/Oral Solutions and Their Application to Deformulation Studies

There were several techniques determined for the analysis of citrate and citric acid mixtures in the pharmaceutical dosage forms. Titration methods, photometric and ion chromatographic methods were used for their determination. These methods will restrict too many factors where the accurate quantification of citrate and citric acid is extremely challenging. Citric acid is the natural flavor used as a preservative for many pharmaceutical applications. Deformulation techniques used for the manufacturing of generic drugs require authentic data for their regulatory submissions. Simple accurate and reproducible validated method developed for the determination of citric acid and sodium citrate by titration followed by HPLC analysis. Free citric acid was determined by the titration method and total citric acid was determined by HPLC analysis. After subtracting the free citric acid from total citric acid content, citric acid present in the sodium citrate content was determined. Sodium citrate content was determined by applying sodium correction factor to the subtracted value of the citric acid. The results met all the validation parameters and the method was successfully measured the amount of citric acid and sodium citrate in the marketed ophthalmic/oral solutions.