Based on mode acoustic emission theory,the paper analyses the acoustic emission analog signal of thin steel plate using matching pursuit,then obtains the characteristics interpretation of the different frequency signa...Based on mode acoustic emission theory,the paper analyses the acoustic emission analog signal of thin steel plate using matching pursuit,then obtains the characteristics interpretation of the different frequency signal energy concentration degree; Combined with four-point arc positioning method,the papers researches the damage localization of the plate-like structure. Simulation experiment shows that this method can accurately detect and locate the damage. This can provide data support for further imaging research based on time reverse theory.展开更多
To obtain the fracture parameters of concrete, fracture tests were conducted with three-point bending beam method aiming at 30 concrete beams with different sizes and different intensity. The concrete specimen with pr...To obtain the fracture parameters of concrete, fracture tests were conducted with three-point bending beam method aiming at 30 concrete beams with different sizes and different intensity. The concrete specimen with prefabricated crack to determine the fracture parameters of concrete were conducted and the fracture performance of the specimen was analyzed. The test results show that, initial fracture toughness is unrelated to the size of specimens; while unstable fracture toughness is related to the size of specimens. As for specimens of bastard size, when concrete intensity is relatively low, unstable fracture toughness increases along with the increase of intensity; when concrete intensity is relatively high, unstable fracture toughness will decrease; when concrete intensity increases continuously, unstable fracture toughness will further increase somewhat. As for specimens of standard size, unstable fracture toughness will increase along with the increase of intensity. Aiming at concrete beam specimens, we conducted two-dimensional non-linear finite element analysis, obtained the stress intensity factor, and carried out contrastive analysis with the experimental results.展开更多
基金supported by the Natural Science Foundation of Naval University of Engineering(under Grant No.HGDYDJJ13152)
文摘Based on mode acoustic emission theory,the paper analyses the acoustic emission analog signal of thin steel plate using matching pursuit,then obtains the characteristics interpretation of the different frequency signal energy concentration degree; Combined with four-point arc positioning method,the papers researches the damage localization of the plate-like structure. Simulation experiment shows that this method can accurately detect and locate the damage. This can provide data support for further imaging research based on time reverse theory.
基金Funded by the National Natural Science Foundation of China(No.51279111)The Non-profit Industry Financial Program by the Ministry of Water Resources in2012(No.201201038)
文摘To obtain the fracture parameters of concrete, fracture tests were conducted with three-point bending beam method aiming at 30 concrete beams with different sizes and different intensity. The concrete specimen with prefabricated crack to determine the fracture parameters of concrete were conducted and the fracture performance of the specimen was analyzed. The test results show that, initial fracture toughness is unrelated to the size of specimens; while unstable fracture toughness is related to the size of specimens. As for specimens of bastard size, when concrete intensity is relatively low, unstable fracture toughness increases along with the increase of intensity; when concrete intensity is relatively high, unstable fracture toughness will decrease; when concrete intensity increases continuously, unstable fracture toughness will further increase somewhat. As for specimens of standard size, unstable fracture toughness will increase along with the increase of intensity. Aiming at concrete beam specimens, we conducted two-dimensional non-linear finite element analysis, obtained the stress intensity factor, and carried out contrastive analysis with the experimental results.
