期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
An ARM-based debugging system for multipole array acoustic logging tools
1
作者 Lu Junqiang Ju Xiaodong Men Baiyong 《Petroleum Science》 SCIE CAS CSCD 2014年第4期508-518,共11页
This paper presents a debugging system for multi-pole array acoustic logging (MPAL) tools. The debugging system proposed in this study can debug the MPAL tool system, sub-system and local electronics. In the test eq... This paper presents a debugging system for multi-pole array acoustic logging (MPAL) tools. The debugging system proposed in this study can debug the MPAL tool system, sub-system and local electronics. In the test equipment, we have used principal and subordinate structures, and interconnected the host computer and the front-end machine via Ethernet. The front-end machine is based on the ARM7 (advanced reduced instruction set computing (RISC) machine) technique, the processor of which runs an embedded operating system, namely, uClinux OS. We have analyzed the system telecommunication, human-machine interface circuit, transmitter mandrel interface circuit, receiver mandrel interface circuit, and board-level test interface circuit. The software used in the system consists of the embedded front-computer software and the host application software. We have explained in detail the flow chart of the boot loader in the embedded front-computer software. The host application software is composed of four application subroutines, which match with the functional modules of the system hardware. A net communication program based on the server^client mode is implemented by means of socket programming and multi-thread programming. Test results indicate that the data transmission rate of the system is higher than 1 MB/s, which completely meets the current requirements of the data transmission rate between the tool system and the wireline telemetry device. Application of the debugging system, which includes multiple level test methods, shows that the proposed system can fully meet the test requirements of MPAL at various levels. 展开更多
关键词 acoustic logging tool debug system advanced RISC machines embedded technique network interconnection
下载PDF
Design of a cross-dipole array acoustic logging tool 被引量:2
2
作者 Lu Junqiang Ju Xiaodong Cheng Xiangyang 《Petroleum Science》 SCIE CAS CSCD 2008年第2期105-109,共5页
When entering an anisotropic formation, a shear wave splits into a fast wave and a slow wave. Based on the principle of four-component cross-dipole acoustic wave measurement, the anisotropy of HTI (Horizontal Transve... When entering an anisotropic formation, a shear wave splits into a fast wave and a slow wave. Based on the principle of four-component cross-dipole acoustic wave measurement, the anisotropy of HTI (Horizontal Transverse Isotropy) formation can be determined. The method of calculating the fast and slow wave data when a shear wave propagates along the borehole axis in anisotropic formation was analyzed, and the implementation of a cross-dipole acoustic logging tool was demonstrated. The tool was composed of transmitter electronics, transmitter mandrel, acoustic isolator, receiver mandrel and main control electronics. Sonde, transmitter circuit, signal receiving and processing circuit, data acquisition system, system control circuit and telemetry interface circuit were presented and analyzed. The test model was used in production wells and standard wells in various areas and the four-component cross-dipole waves were acquired and processed. The waves had good signal-to-noise ratio and clear characteristics, and the fast and slow waveforms, processed slowness curves, anisotropy and fast shear wave azimuth well matched with each other. 展开更多
关键词 acoustic logging tool cross-dipole ANISOTROPY ELECTRONICS sonde
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部