Development of in-situ Marine Sediment Geo-Acoustic Measurement System with Real-Time and Multi Frequencies (the Second Generation)

Compared with the laboratory acoustic measurement of sediment samples, the in-situ acoustic measurement in marine sediment is considered more accurate and rehable, because it covers all of the surrounding environment factors and avoids the disturbance during the course of sampling and transporting of sediment samples. A new multi-frequency in-situ geoacoustic measurement system （MFIS^AMS） has been developed. The system can provide acoustic vdocity （compressional wave） and attenuation profiles of the uppermost 4 - 8 m sediment in the seafloor. It consists of 8 channels with 12 frequencies （multi-frequencies） and 0.5 - 2 MHz sampling rates. The data collected can be transmiuted in real-time. Associated with inclinometer and altimeter, it can provide the data for depth emendation. Acoustic velocity and attenuation data have been obtained from two in-situ experiments conducted in the Hangzhou Bay.

Acoustic measurements of models of military style supersonic nozzle jets

Modern military aircraft jet engines are designed with variable-geometry nozzles to provide optimal thrust in different operating conditions, depending on the flight envelope. How- ever, acoustic measurements for such nozzles are scarce, due to the cost involved in making full- scale measurements and the lack of details about the exact geometries of these nozzles. Thus the present effort at Pennsylvania State University （PSU） in partnership with GE Aviation and the NASA Glenn Research Center is aiming to study and characterize the acoustic field produced by supersonic jets issuing from converging-diverging military style nozzles, and to identify and test promising noise reduction techniques. An equally important objective is to develop methodology for using data obtained from small- and moderate-scale experiments to reliably predict the full-scale engine noise. The experimental results presented show reasonable agreement between small-scale and medium-scale jets, as well as between heated jets and heat-simulated ones.

Study of A Geo-Acoustic Model of Gas-Bearing Sediment and Its Application in Sediment with Low Acoustic Veloctiy

A new geo-acoustic model for gas-bearing sediment is proposed based on the work of Dvorkin and Prasad, and Biot theory. Only five geophysical parameters： sediment mineral composition, free gas saturation, tortuosity （also known as the structure factor）, permeability, and porosity, are considered in the model. A benefit of this model is that we need only five parameters instead of ten parameters in the Blot＇ s formulas for acoustic velocity and attenuation calculation. Here the model is demonstrated with the in-situ experimental data collected from the Hangzhou Bay, China. The results of this study suggest that free gas content in sediment is the most critical condition resulting in a low acoustic velocity （compressional wave）. The respective contributions of the other four parameters in the model are also discussed.

Mesozoic–Cenozoic stress field magnitude in Sichuan Basin, China and its adjacent areas and the implication on shale gas reservoir: Determination by acoustic emission in rocks

The Sichuan Basin is one of the vital basins in China,boasting abundant hydrocarbon reservoirs.To clarify the intensity of the tectonic stress field of different tectonic episodes since the Mesozoic and to identify the regional dynamic background of different tectonic movements in the Sichuan Basin and its adjacent areas,the characteristics of the acoustic emission in rocks in different strata of these areas were researched in this paper.Meanwhile,the tectonic stress magnitude in these areas since the Mesozoic was restored.The laws state that the tectonic stress varied with depth was revealed,followed by the discussion of the influence of structural stress intensity on structural patterns in different tectonic episodes.These were conducted based on the paleostress measurement by acoustic emission method and the inversion principle of the stress fields in ancient periods and the present,as well as previous research achievements.The results of this paper demonstrate that the third episode of Yanshanian Movement(Yanshanian III)had the maximum activity intensity and tremendously influenced the structural pattern in the study area.The maximum horizontal principal stress of Yanshanian III varied with depth as follows:0.0168 x+37.001(MPa),R^2=0.8891.The regional structural fractures were mainly formed in Yanshanian III in Xujiahe Formation,west Sichuan Basin,of which the maximum paleoprincipal stress ranging from 85.1 MPa to 120.1 MPa.In addition,the law stating the present maximum horizontal principal stress varies with depth was determined to be 0.0159 x+10.221(MPa),R^2=0.7868 in Wuling Mountain area.Meanwhile,it was determined to be 0.0221 x+9.4733(MPa),R^2=0.9121 in the western part of Xuefeng Mountain area and 0.0174 x+10.247(MPa),R^2=0.8064 in the whole study area.These research results will not only provide data for the simulation of stress field,the evaluation of deformation degree,and the prediction of structural fractures,but also offer absolute geological scientific bases for the elevation of favorable shale gas preservation.

Reliability analysis of in-situ stress measurement using circumferential velocity anisotropy

In-situ stress measurement for deep reservoir formation is difficult in terms of security, reliability and technique. Acoustic velocity anisotropy test is a basic method for stress measurement of rock cores, which is based on the distribution of acoustic velocity in different directions around rock cores. The heterogeneity of core samples, such as fractures and gravel contained, can also lead to wave velocity anisotropy. Therefore, the corresponding reliability evaluation method is established to exclude some other anisotropy factors caused by non-tectonic stresses. In this paper, the reliability of testing results is evaluated from three aspects, i.e. phase difference, anisotropy index and waveform, to remove the factors caused by non-tectonic stresses.

Massage and vocal training in a case of spasmodic dysphonia

A 35-year-old female patient with spasmodic dysphonia underwent massage and vocal training. Chinese manipulation was administered to Tiantu （CV 22） and Lianquan （CV 23）, the convergent acupoints of the conception meridian and Yin link vessel, Yamen （GV 15） and Fengfu （GV 16）, the convergent acupoints of Du meridian and Yang link vessel, as well as large intestine channel of hand Yangming Hegu （LI 4）, by gently pressing and rubbing for stimulation. In addition, throat muscle massage therapy and vocal training were performed. Results were evaluated using acoustic measurements in combination with a single statistical method. A comprehensive treatment combining vocal training and face-neck massage was shown to relieve dystonia of facial-cervical muscles in patients, as well as improve voice quality while providing a safe treatment method.

Improving sound diffusion in a reverberation tank using a randomly fluctuating surface

Underwater reverberation environments that satisfy the conditions of uniformity and isotropy of the diffuse field can be used to measure the acoustic characteristics of underwater targets.This study combines two practical indicators—the standard deviation of the absolute sound pressure field(to indicate uniformity)and the analysis of the wavenumber spectrum in the spherical harmonics domain(to indicate isotropy)—for an accurate evaluation of the diffusion of the sound field in a reverberation tank.A method is proposed that can improve the narrow-band diffusion of the sound field by employing a randomly fluctuating surface.An acoustic experiment was performed in a reverberation water tank(1.2 m×1 m×0.8 m),where a randomly fluctuating surface was generated by making waves.The experimental results show that as the wave motion contributes effectively to the random reflection of sound rays in all directions,the uniformity and isotropy are improved significantly when the surface is fluctuating randomly.This work helps to ensure accurate measurements of the characteristics of underwater targets in reverberation tanks.

温度、盐度和流体类型对圆柱周围湍流声学特性的影响研究

The effects of the temperature,salinity,and fluid type on the acoustic characteristics of turbulent flow around a circular cylinder were numerically investigated for the Reynolds numbers of 2.25×10^(4),4.5×10^(4),and 9.0×10^(4).Various hybrid methodsReynolds-averaged Navier-Stokes(BANS)with the Ffowcs Williams and Hawkings(FWH)model,detached-eddy simulation(DES)with FWH,and large-eddy simulation with FWH-were used for the acoustic analyses,and their performances were evaluated by comparing the predicted results with the experimental data.The DES-FWH hybrid method was found to be suitable for the aero-and hydro-acoustic analysis.The hydro-acoustic measurements were performed in a silent circulation channel for the Reynolds number of 2.25×10^(4).The results showed that the fluid temperature caused an increase in the overall sound pressure levels(OASPLs)and the maximum sound pressure levels(SPL_(T))for the air medium;however,it caused a decrease for the water medium.The salinity had smaller effects on the OASPL and SPLT compared to the temperature.Moreover,the main peak frequency increased with the air temperature but decreased with the water temperature,and it was nearly constant with the change in the salinity ratio.The SPLT and OASPL for the water medium were quite higher than those for the air medium.

Use of acoustic intensity measurements in underwater acoustics (Modern state and prospects)

This paper discusses scalar and vector characteristics of underwater ambient noise which were explored by the authors and their colleagues in different regions of the Earth Ocean.The measurements presented were performed in 6 Hz - 1000 Hz band, at depths up to 1000 m and wind speeds less than 15 m/s. The following questions are addressed: ratio between edsotropic (coherent) and isotropic (diffusive) parts of ambient noise; noise energy transport and its cotmection with surface waves propagation direction; noise energy flow cancenation by opposite energy flow of signal; signal-to-noise ratio for combined receiver in dynamic noise field. It follows from the results presellted, that further development of underwater intensity measurements opens new opportunities for investigations in the fields of underwater acoustics and oceanology.

Measurement of the echo reduction for underwater acoustic passive materials by using the time reversal technique

A measuring method of the echo reduction of passive materials by using the time reversal（TR） technique is presented. To measure the echo reduction of a sample with this approach, the received signals are firstly focused according to the TR theory. Then, the sample is removed and the TR processing is again employed to realize the focus of the received signal.Finally, the echo reduction of the sample is evaluated with these focusing signals. Besides, to calibrate the measured echo reduction via the TR technique, a standard sample is employed to measure a constant coefficient that only depends on the measurement environment. An aluminum plate sample and a steel plate sample with the same size of 1.1 mxl.O m x0.005 m axe tested in a wave guide tank. The experimental results show that the calibrated values are well consistent with theoretical results under the free field at the measured frequency range of0.5-20 kHz. The relative errors of all the measured values are less than 10% and the values of the expanded uncertainty are less than 1.5 dB. The TR processing focuses the energy in spatial domain and temporal domain, so it can be used to measure the echo reduction of passive materials in the environments with reflections induced by boundaries and low frequency sources.

Measurement of acoustic field radiated by low frequency power ultrasonic transducer with laser-interferometer

Based on the piezo-optic effect of medium, the refractive index of medium is the function of its density, and so it's also the function of acoustic pressure. Therefore, acoustic pressure in the optical path everywhere can be determined absolutely by laser-interferometric technique and relative distribution of pressure in the middle and far acoustic field, which can be obtained from theory or experiment respectively. Theory and experiment of measurement of pressure in acoustic field with laser-interferometer are introduced. Distribution of pressure radiated by a power ultrasonic transducer is determined by laser interferometric technique. The theoretical and experimental results are in good agreement. The receiving sensitivity of a PVDF (Polyvinylidene fluoride) transducer in free field is also calibrated absolutely due to above results and its sensitivity is -118.5 dB.

Measurement of insertion loss for underwater acoustic passive materials with the time reversal technique

A method using the time reversal（TR） technique to measure the insertion loss（IL） of passive materials is presented.Firstly the received signals are focused according to the TR theory when there is not a sample between the source and the received array.Then,the sample is placed near the received array and the TR processing is again employed to realize the focus of the received signal.Finally,the IL of the sample is evaluated from these focusing signals.Because the TR processing can focus the energy in spatial domain and time domain,the method can be used to measure acoustic properties of passive materials in a waveguide tank with reflections induced by boundaries or with low source frequencies.Two samples with the same size of 1.1 m×1.0 m×5 mm are tested in the waveguide tank.The method is demonstrated by the comparison of the theoretical and the experimental results in the measured frequency range of 1-20 kHz.

DFB fiber laser sensor for simultaneous measurement of acoustic and magnetic fields

A novel distributed feedback（DFB） fiber laser sensor, which can measure acoustic and magnetic fields simultaneously, is proposed. The magnetic field can be measured by detecting the change of resonant frequency of the fiber laser, and the acoustic pressure can be measured by detecting the phase shift of the fiber laser. Both of the signals can be simultaneously demodulated in the frequency domain without affecting each other. Experimental studies show that the acoustic pressure sensitivity of this sensor is about-130 d B（0 dB re 1 pm∕μPa） and the sensor has a good linearity with a magnetic field sensitivity of 0.57 Hz∕mT.

Application of piezoelectric transient response in transducer acoustic power measurement

To explore a more convenient method for measuring the focused ultrasound power, a piezoelectric ceramic plate was used to receive ultrasonic signal directly. Due to an acoustic force acts on the surface of piezoelectric ceramic plate, the piezoelectric response was obtained by means of electromechanical analogy, which was composed of voltage response caused by forced vibration and high frequency attenuation response caused by natural vibration. The conversion relationship between output signal of piezoelectric ceramic plate and acoustic power of transducer was analyzed. The envelope of output piezoelectric signal was extracted in twice, and a voltage amplitude curve with sinusoidal distribution that could describe the changes of acoustic power was obtained. Under different drive voltage of transducer, the maximum peak voltage of envelope curve was found respectively. Their squared values were made a linear fitting with acoustic power measured by acoustic power meter, and then the proportional coefficient of theoretical relational expression was calibrated. The experimental results are in good agreement with the theory. The relative error between calibrated theoretical acoustic power and that measured by acoustic power meter was less than 8.7%. The paper can provide a guideline for measuring acoustic power of transducer by using piezoelectric signal.

Application and measurement of underwater acoustic reciprocity transfer functions in reverberant sound field

The reciprocity measurement theory in anomalous reverberant sound fields was investigated.An improved method Was proposed due to the interrelated errors.The source volume velocity Was corrected by spatial average of measurement results and evaluation of the reverberant sound field influence on acoustic energy density.The result was validated in underwater experiment,corrected reciprocity measurement results were almost the same as direct measurement results.It indicates that reverberant sound field does not affect the validitv of the principle,but influences the obtainment of source volume velocity,then influences the measurement of transfer functions with the principle.The proposed method is simple and effective in anomalous reverberant sound fields.The study mav be valuable for the applications which are based on the principle.

A study of measuring acoustic velocities of thin and hard sea-bed layers

It has been known that the error of measuring acoustic veloicities of thin sediment layers by the well-known T2-X2 approach is usually untolerable, and that this approach is unavailable in the case where sea-bed is hard because no echo from any subsurface below sea-bottom can be received. Therefore applying the ray-parameter method to thin layers and the refraction method to hard layers need to be considered in an acoustic velocity measurement system composed of a sound source and a towed hydrophone streamer. Some problems of practical importance about the applications of the two methods, such as echo-data processing procedures and error estimations in measuring acoustic veloicities, are discussed, and the effectiveness of theoretical analyses has been verified through computer simulations.

Method based on broadband compressed pulse superposition to measure properties of underwater acoustic materials

A method is proposed for the measurements of the performances of underwater acoustic finite sized large area material samples in a free field by using broadband pulse compression technique. As the result of which, the low-frequency cutoff of the standard tests is obviously reduced, and the broadband measurements are also realized. The experimental system provides measurements of complex reflection and transmission coefficients at continuous frequency points. From the data one can obtain the following acoustic parameters: echo reduction and insertion loss, absorption and attenuation coefficients, etc. The measurements are performed for two actual panels with the size 1 m x 1 m in the frequency range from 2-20 kHz.

Investigation on method for measuring dynamic shear modulus of underwater acoustic structure materials

A new method is described to measure the dynamic shear modulus of underwater acoustic structure materials in a small anechoic water tank by using a broadband parametric source, a precise coordinate installation and techniques of signal processing in the frequency range of 20 kHz - 100 kHz. The typical size of material samples is 500×500 mm2. Basic principles, experiment installation and measured results are also presented

ATTENUATION AND GROUP VELOCITY OF NORMAL MODE IN AN ISO-VELOCITY SHALLOW WATER

Proceeding from the eigenvalue equation of the normal mode in homogeneous shallow water, we derive several formulae calculating the mode attenuation and group velocity, and compare their accuracy by means of numerical results. The paper especially discusses the attenuation and the group velocity of critical mode in a Pekeris channel and shows that in general, the attenuation and the group velocity of the critical mode respectively are less than the absorption and the sound speed in the bot -torn . Therefore, the Kornhauser, Raney, Weston Tindle ' s conclusions are modified that the attenuation and the group velocity of the critical mode are exactly equal to the absorption and the sound speed in the bottom, respectively.

MIDDLE EAR MECHANISMS IN PROTECTION AGAINST NOISE-INDUCED COCHLEAR DAMAG*

Quantitative estimation of sound transmission attenuation by different middle-ear protecting mechanisms was made with the use of a computer-based CM-cogram analyzing method (FFT of cochlear output in response to white noise) and other audiometric means. Strong reflex contraction of the middle-ear muscles in guinea pigs may cause a 5- 20 dB transmission attenuation in different frequency ranges. For impulse noise exposure, the presence of an effective reflex at the lashing of every impulse may reduce the post - exposure hearing threshold shift in 15 dB on an average.Increasing tension of the tympanic membrane by applying pressure to the ear- canal is also eflicacious.especially for frequencies below 500 Hz where attenuation of more than 10dB may result at a pressure difference of about 200mm H2O between the two sides of the membrane. Simulated opening of the eustachian tube helps only very insignificantly, with attenuation less than 5 dB. Destruction of the middle-ear structures ( drum perforation, ossicular disruption etc .) and fluid accumulation inside the tympanic cavity may buffer acoustic trauma to the cochlea to different extent depending on the amount of transmission attenuation.