LOCAL ORTHOGONAL TRANSFORMATION FOR ACOUSTIC WAVEGUIDE

In this paper, a local orthogonal transformation is created to transform the Helmholtz waveguide with curved interface to the one with a flat interface within the two layer medium, and the Helmholtz equation u xx +u zz +κ 2(x,z)u=0 is transformed to V +αV +β V +γV=0 . Numerical results demonstrate that the transformation is more feasible. This transformation is particularly useful for the research on wave propagation in acoustic waveguide.

Numerical prediction of envelope line-spectrum intensity in underwater acoustic waveguides

In order to predict the detectible range and region of passive sonar in underwater channel,the attenuation causes of envelope line-spectrum height during vessel noise propagation are analyzed and an approach of numerical prediction is proposed.In the paper a model for vessel radiated noise is established by a periodically locally stationary random process,two formulae of the envelope line-spectrum height with and without background-noise are deduced, therefore the attenuation rule of the envelope line-spectrum height is obtained.It is shown that the transmission loss of the sound level of the envelope line-spectrum is same as the sound level of the stationary spectrum,but the decrease of envelope line-spectrum height depends on a modified scale of amplitude modulation depth which is variable with the ratio of signal to noise. An approach of numerical prediction for envelope line-spectrum height is as follows：first,the transmission loss of the stationary radiated noise is derived using the numerical approaches of normal modes or wavenumber integration or PE etc.,then the ratio of signal to noise on sound field is calculated,finally the decrease of envelope line-spectrum height is obtained according to the modified scale,and the envelope line-spectrum height in sound field is predicted.The theory and the numerical prediction approach possess certain innovation,practicality,simplicity and suitability for engineering.

An acoustic bending waveguide designed by anisotropic density-near-zero metamaterial

Anisotropic metamaterial with only one component of the mass density tensor near zero （ADNZ） is proposed to control the sound wave propagation. We find that such an anisotropic metamaterial can be used to realize perfect bending waveguides. According to a coordinate transformation, the surface waves on the input and output interfaces of the ADNZ metamaterial induces the sound energy flow to be redistributed and match smoothly with the propagating modes inside the metamaterial waveguide. According to the theory of bending waveguide, we realize the ＂T＂-type sound shunting and convergence, as well as acoustic channel selection by embedding small-sized defects. Numerical calculations are performed to confirm the above effects.

Analysis and comparison between two coupled-mode methods for acoustic propagation in range-dependent waveguides

Two coupled-mode methods, namely DGMCM （Direct-Global-Matrix Coupled- Mode Method） and CCMM （Consistent Coupled-Mode Method）, are analyzed and compared. First, both of these two methods provide two-way solutions, and hence they are accurate models. Second, the series of local vertical modes in DGMCM converges as fast as that in CCMM, whereas DGMCM has a more tolerable requirement of the number of segments than CCMM. Third, these two models obtain the field solution by solving the coupled-mode system with different coefficient matrices, in which the computational effort for the required parameters is almost the same. Finally, DGMCM can handle some problems which are difficult for CCMM, such as in a waveguide with a rough bottom, a line source located right on top of a sloping bot- tom, or in the presence of multiple sources. In DGMCM, closed-form expressions for coupling matrices in a two-layer waveguide are given. In addition, the formulation for the line-source problem in plane geometry is derived to update CCMM.

Sound-transparent anisotropic media for backscattering-immune wave manipulation

The scattering behavior of an anisotropic acoustic medium is analyzed to reveal the possibility of routing acoustic signals through the anisotropic layers with no backscattering loss. The sound-transparent effect of such a medium is achieved by independently modulating the anisotropic effective acoustic parameters in a specific order, and is experimentally observed in a bending waveguide by arranging the subwavelength structures in the bending part according to transformation acoustics. With the properly designed filling structures, the original distorted acoustic field in the bending waveguide is restored as if the wave travels along a straight path. The transmitted acoustic signal is maintained nearly the same as the incident modulated Gaussian pulse. The proposed schemes and the supporting results could be instructive for further acoustic manipulations such as wave steering, cloaking and beam splitting.

Finite Element - Artificial Transmitting Boundary Method for Acoustical Field on Tapered Waveguide

In earlier approach, the 2-D acoustical field profiles on the substrate region are often calculated with BPM. In this paper, we present a new approach based on the finite element -artificial transmitting boundary method and calculate acoustical field on the substrate region.