1.5-MHz repetition rate passively Q-switched Nd:YVO4 laser based on WS2 saturable absorber

A transmission-type tungsten disulfide（WS_2）-based saturable absorber（SA） is fabricated and applied to passively Q-switched Nd：YVO_4 laser.The WS_2 nanosheets are deposited on a quartz substrate by the vertical evaporation method.By inserting the WS2 SA into the plano-concave laser cavity,we achieve 153-ns pulses with an average output power of1.19 W at 1064 nm.To the best of our knowledge,both of them are the best results among those obtained by the Q-switched solid-state lasers with WS_2-based absorbers.The repetition rate ranges from 1.176 MHz to 1.578 MHz.As far as we know,it is the first time that MHz level Q-switched pulses have been generated in all solid state lasers based on low-dimensional materials so far.

A compact graphene Q-switched erbium-doped fiber laser using optical circulator and tunable fiber Bragg grating

We demonstrate a passively Q-switched tunable erbium-doped fiber laser （EDFL） based on graphene as a saturable absorber （SA）. A three-port optical circulator （OC） and a strain-induced tunable fiber Bragg grating （TFBG） are used as the two end mirrors in an all-fiber linear cavity. The Q-switched EDFL has a low pump threshold of 23.8 mW. The pulse repetition rate of the fiber laser can be widely changed from 9.3 kHz to 69.7 kHz by increasing the pump power from 23.8 mW to 219.9 mW. The minimum pulse duration is 1.7 p.s and the highest pulse energy is 25.4 nJ. The emission wavelength of the laser can be tuned from 1560.43 nm to 1566.27 nm by changing the central wavelength of the straininduced TFBG.

Passively Q-switched diode-pumped Tm,Ho:LuVO4 laser with a black phosphorus saturable absorber

We presented a passively Q-switched(PQS) diode-pumped c-cut Tm, Ho:LuVO_4 laser with a black phosphorus saturable absorber for the first time.Under PQS mode, an average output power of 0.86 W and a peak power of 2.32 W were acquired from the Tm, Ho:LuVO4 laser with the pump power of 14.55 W, corresponding to a pulse width of 2.89 μs,a pulse repetition rate of 71.84 kHz, and a pulse energy of about 6.70 μJ.

Passively Q-switched dual-wavelength Yb：LSO laser based on tungsten disulphide saturable absorber

We demonstrate a passively Q-switched Yb：LSO laser based on tungsten disulphide （WS2） saturable absorber op- erating at 1034 nm and 1056 nm simultaneously. The saturable absorbers were fabricated by spin coating method. With low speed, the WS2 nanoplatelets embedded in polyvinyl alcohol could be coated on a BK7 glass substrate coated with high-refractive-index thin polymer. The shortest pulse width of 1.6 gs with a repetition rate of 76.9 kHz is obtained. As the pump power increases to 9 W, the maximum output power is measured to be 250 mW, corresponding to a single pulse energy of 3.25 μJ. To the best of our knowledge, this is the first time to obtain dual-wavelength Q-switched solid-state laser using few-layer WS2 nanoplatelets.

Diode end-pumped self-Q-switched and mode-locked Nd,Cr：YAG /KTP green laser

We first experimentally demonstrate a laser-diode end-pumped self-Q-switched and mode-locked Nd,Cr：YAG green laser with a KTP crystal as the intra-cavity frequency doubler. The device produces an average output power of 680 mW at 532 nm. The corresponding pulse width of the Q-switched envelope of the green laser is 170 ＋ 20 ns. The mode-locked pulses have a repetition rate of approximately 183 MHz and the average pulse duration is estimated to be around sub-nanosecond. It is found that the intra-cavity frequency doubling greatly improves the modulation depth and stability of the mode-locked pulses within the Q-switched envelope.

High-energy pulse generation using Yb-doped Q-switched fiber laser based on single-walled carbon nanotubes

An all-fiber laser using a single-walled carbon nanotube（SWCNT） as the saturable absorber（SA） for Q-switched operation in the 1031 nm region is demonstrated in this work. A lasing threshold as low as 17 mW was realized for continuous wave operation. By further increasing the pump power, stable Q-switched pulse trains are obtained when the pump power ranges from 38 mW to 125 mW, corresponding to repetition rate varying from 40.84 kHz to 66.24 kHz, the pulse width from 2.0 μs to 1.0 μs,and the highest single pulse energy of 40.6 nJ respectively.

The Effect of Injected Energy on Low Energy Single Longitudinal Mode Pre-Lase Q-Switched Pr:YLF Laser

In this paper, the effect of injected energy on low energy single longitudinal mode (SLM) pre-lase Q-switched is analyzed and the optimization procedure is shown in detail. Here, taking the Pr:YLF laser as an example of low energy laser, and the parameters of Pr:YLF laser by using pre-lase have been shown. Compared with normal Q-switched laser, the single pulse energy reaches 60.16% and the pulse width exceeds 39.73% when the same maximum energy is injected and SLM is achieved in pre-lase. The analysis results show that pre-lase is suitable for low energy laser to obtain SLM and there be an optimal performance to achieve the optimal energy output.

Analysis of New Q-switched Erbium Doped Fiber Laser Based on Fiber Grating Loop Mirror

An all fiber wavelength selective Q switching modulator based on fiber grating loop mirror is proposed. A newly configured Q switched erbium doped fiber laser using this all fiber modulator is numerically analyzed taking into account the effects of the spontaneous emission.

1.12-W Q-switched Yb:KGW laser based on transmission-type Bi_2Se_3 saturable absorber

We present a passively Q-switched Yb：KGW laser based on a transmission-type saturable absorber of topological insulator：Bi2Se3.The saturable absorber is prepared on a 0.17-mm glass substrate and can translate intra-cavity for best performance nearly without influence on the laser mode.At a maximum pump power of 13.7 W,the central wavelength,pulse duration,repetition rate,and pulse energy of Q-switched pulse are 1043 nm,1.5 μs,175.4 kHz,6.39 μJ,respectively.The maximum output power is 1.12 W.To our knowledge,this is the highest average output power from passively Qswitched lasers with topological insulator saturable absorbers.

Zinc-oxide nanoparticle-based saturable absorber deposited by simple evaporation technique for Q-switched fiber laser

A Q-switched erbium-doped fiber laser(EDFL)incorporating zinc-oxide(ZnO)nanoparticles-based saturable absorber(SA)is proposed and demonstrated.To form the SA,the ZnO nanoparticles,which are originally in the powder form,are first dissolved in ethanol and subsequently deposited onto the surface of fiber ferrule by using the adhesion effect with the evaporation technique.By integrating the ZnO nanoparticle-based SA into a laser cavity of an EDFL,a self-started and stable Q-switching is achieved at a low threshold power of 20.24 mW.As the pump power is increased,the pulse repetition rate is tunable from 10.34 kHz to 25.59 kHz while pulse duration decreases from 21.39μs to 3.65μs.Additionally,this Q-switched laser has a maximum energy per pulse of 19.34 nJ and an average output power of 0.46 mW.These results indicate the feasibility and functionality of the ZnO nanoparticles-based SA for Q-switched generation,which offers the flexibility and easy integration of the SA into a ring laser cavity.

Tandem-pumped 1120-nm actively Q-switched fiber laser

We report on a tandem-pumped actively Q-switched fiber laser system emitting at 1120 nm.Parasitic oscillation is challenging in Yb-doped Q-switched 1120-nm fiber laser,which is suppressed by pumping with a fiber laser at 1018 nm.At least four times improvement in output peak power is demonstrated in a single laser setup with 1018-nm fiber laser pumping instead of 976-nm laser diode pumping.This is,to the best of our knowledge,the first demonstration of a tandem-pumped Q-switched fiber laser.

Er^3+,Yb^3+:glass-Co^2+:MgAl2O4 diffusion bonded passively Q-switched laser

A Co^2＋：spinel passively Q-switched erbium-ytterbium-phosphate glass bonded laser pumped at 940 nm is reported.A pulse energy of 210 μJ, a peak power over 70 kW, and beam quality M-2 parameter of 1.2 are obtained under a pump power of 235 mW. An unbonded laser output experiment with the same dimension of the active material and the saturable absorber as the bonded laser output experiment is carried out. The reason why the output in the bonded laser is improved is determined.

Modelling of passively Q-switched lasers with intracavity Raman conversion

We present a model of passively Q-switched Raman lasers by utilizing the rate equations. The intracavity fun-damental photon density, Raman photon density and the initial population-inversion density of the gain medium are assumed to be of Gaussian spatial distributions. These rate equations are normalized by introducing some synthetic parameters and solved numerically, and a group of general curves are generated. Prom these curves we can understand the dependence of the Raman laser pulse characteristics on the parameters about the pumping, the gain medium, the Raman medium and the resonator. An illustrative calculation for a passively Q-switched Nd^3＋：GdVO4 self-Raman laser is presented to demonstrate the usage of the curves and related formulas.

High conversion efficiency, high power density Q-switched fiber laser

An acoustic-optic Q-switched all-fiber laser With a high-repetition-rate, a short pulse width, a wide spectrum, and a high conversion efficiency is experimentally demonstrated. In the laser configuration, a （1＋1）x 1 side-pumping coupler is introduced to perform backward pumping, and a 10/130%tm Yb fiber is adopted. The acoustic-optic component operates in the first direction, achieving a Q-switched pulse with a repetition rate adjustable in the range of 20 kHz-80 kHz. Under a repetition rate of 20 kHz and a pump power of 6.76 W, the fiber laser obtains a highly efficient and stable pulse output, with an average power of 4.3 W, a pulse width of 56 ns, a peak power of 3.83 kW, and a power density of 1.39x 101~ W/cm2. Particularly, the optic-optic conversion efficiency of the laser reaches as high as 64%. Another feature of the pulsed laser is that the high reflection mirror reflects the pump light as well, which brings the secondary absorption of the pump power into the gain fiber.

Analysis and design of CW-LD pumped stable Q-switched laser

A high power continuous wave (CW) laser diode (LD) pumped acousto-optic Q-switched Nd:YVO4 laser is presented. A short pulse at the 1064 nm is obtained. With a repetition rate of 50 kHz,the maximum average output power of 5.72 W is achieved. The optical conversion efficiency and the slope efficiency are up to 28% and 32.4% respectively. At the repetition rate of 10 kHz and the pulse width of 16.3ns, the maximum single pulse energy of 286 μJ and the peak power of 13kW are acquired. The laser can be used as a signal source in the free-space optical communication. The output signal agrees with the modulate signal well.

Tunable Nd,La:SrF2 laser and passively Q-switched operation based on gold nanobipyramids saturable absorber

A novel Nd, La：SrF_2 disordered crystal is prepared, and its continuous-wave wavelength tuning operation is performed for the first time. Employing a surface plasmon resonance（SPR） based gold nanobipyramids（G-NBPs） saturable absorber,we obtain a compact diode-pumped passively Q-switched Nd, La：SrF_2 laser. The stable Q-switched pulse operates with the shortest pulse duration of 1.15 μs and the maximum repetition rate of 41 k Hz. The corresponding single pulse energy is 2.24 μJ. The results indicate that G-NBPs could be a promising saturable absorber applied to the diode-pumped solid state lasers（DPSSLs）.

The Q-Switched Nd: YAG Laser in Tattoo Removal and the Effect of Lymphatic Elimination: An Experimental Study in Rabbits

Background: Previously described methods for removal of tattoos are chemical, mechanical, surgical, termal and laser assited methods. Invention of the Q-switch mode, advanced the laser method, to be one of the most effective methods of tattoo removal. Objective: Comparing the tattoo removal and rate of lymphatic elimination of 3 different wavelengths of Q-switched Nd-YAG laser (532nm, 1064nm, combination 532 + 1064). Methods: In this study we examined lymphatic elimination and the effect of 532 nm, 1064 nm, and the combination (532 + 1064 nm) wavelength of laser pulse for the possible lymphatic cleansing mechanism of black pigmented tattoos. This study was performed on 18 New-Zealand rabbits, black pigmented tattoos were engraved on the back and the four extremities of the animals. 532 nm wavelength of Q switched Nd: YAG laser beam was applied on the left upper and bilateral lower extremities of the rabbits. During this period, excisional skin biopsies and lymph node biopsies were performed on days 7, 14 and 21. Results: Day 21 lymph node biopsies revealed mixed type of reactive hyperplasia and intracellular pigments were markedly seen in the laser treatment group and no intracellular tattoo pigment was seen in the control group. Conclusion: The findingd of this study indicate that lymphatic elimination may be one of the significant mechanisms of tattoo removal and the application of different wavelengths of Q-switched Nd-YAG laser do not show statistically significant differences in tattoo removal.

Diode-pumped Doubly Q-switched Nd∶YAG Laser with Acoustic-optical Modulator and Cr^(4+)∶YAG Saturable Absorber

A diode-pumped doubly Q-switched Nd∶YAG laser operating at 1064nm both with an acoustic-optical(AO)modulator and Cr4+∶YAG saturable absorber in the cavity is demonstrated.At the incident pump power of 11.8W the laser can generate stable 8ns pulse with the peak power of 23.6kW at a 10kHz repetition rate.The pulse temporal profile is more symmetric and shorter compared with that of passively Q-switched lasers with only AO-active and Cr4+∶YAG.A reasonable analysis is developed to explain the experimental results theoretically.

Numerical Study of Transient Temperature Distribution in Passively Q-Switched Yb:YAG Solid-State Laser

In this work, the thermal characterization of continuously pumped passively Q-switched laser is quantitatively represented. The system under investigation is end-pumped Yb:YAG passively Q-switched by Cr4+:YAG as saturable absorber. The rate equations describing the dynamics of laser action are numerically solved simultaneously with the temperature conductivity heat equation to depict the transient temperature distribution. The study has been performed in the cylindrical coordinates to characterize the temperature distribution in the axial and radial directions. The thermal transient time in both directions as well as the thermal focal length are calculated. The temporal behavior of the temperature distribution has been illustrated in a 3-dimensional diagram.

Diode Pumped High Peak Power Quasi Q-Switched and Passively Q-Switched Nd:YVO₄Lasers at 1064 nm and 532 nm using Cr:YAG and KTP crystals

Diode end-pumped solid-state lasers have the potential to yield high quality laser beams with high efficiency for laser range finding and warning receiver applications as well as day and night military laser designation systems. In this paper we presents theoretical calculations using Advanced Dynamics Professional LASCAD software and experimental studies for a high power pigtailed fiber diode laser module of 8 W operating at 808 nm with a specially designed high efficiency cooling system, end pumped high-efficiency Nd:YVO4 laser of 3 × 3 × 10 mm rod and overall cavity length of 44 mm. To the best of our knowledge a self Q-switching effects was generated in Nd:YVO4 laser by changing the cavity dimensions and the position of the intracavity KTP crystal at certain regime of operation for the first time, in which the cavity length is reduced to be 30 mm and the distance between Nd:YVO4 rod and KTP crystal is only 1mm. Self Q-switched laser pulse at 532 nm with high peak power of 96 W, pulse width of 88 ns at FWHM and repetition rate of 400 kHz was achieved. Experimental studies of a passive Q-switched Nd:YVO4 laser using Cr:YAG crystal with three different transmissions of 30%, 40% and 70% were investigated. Passive Q-switched laser pulse at 1064 nm and narrow line width of less than 1.5 nm with highest peak power of nearly 18 kW, short pulse width of less than 4 ns at FWHM and higher repetition rate of 45 kHz using Cr:YAG with transmission of 30% was achieved for the first time.