Maximum Power Point Tracking Based on Improved Kepler Optimization Algorithm and Optimized Perturb&Observe under Partial Shading Conditions

Under the partial shading conditions(PSC)of Photovoltaic(PV)modules in a PV hybrid system,the power output curve exhibits multiple peaks.This often causes traditional maximum power point tracking(MPPT)methods to fall into local optima and fail to find the global optimum.To address this issue,a composite MPPT algorithm is proposed.It combines the improved kepler optimization algorithm(IKOA)with the optimized variable-step perturb and observe(OIP&O).The update probabilities,planetary velocity and position step coefficients of IKOA are nonlinearly and adaptively optimized.This adaptation meets the varying needs of the initial and later stages of the iterative process and accelerates convergence.During stochastic exploration,the refined position update formulas enhance diversity and global search capability.The improvements in the algorithmreduces the likelihood of falling into local optima.In the later stages,the OIP&O algorithm decreases oscillation and increases accuracy.compared with cuckoo search(CS)and gray wolf optimization(GWO),simulation tests of the PV hybrid inverter demonstrate that the proposed IKOA-OIP&O algorithm achieves faster convergence and greater stability under static,local and dynamic shading conditions.These results can confirm the feasibility and effectiveness of the proposed PV MPPT algorithm for PV hybrid systems.

Research on the MPPT of Photovoltaic Power Generation Based on Improved WOA and P&O under Partial Shading Conditions

Partial shading conditions(PSCs)caused by uneven illumination become one of the most common problems in photovoltaic(PV)systems,which can make the PV power-voltage(P-V)characteristics curve show multi-peaks.Traditional maximum power point tracking(MPPT)methods have shortcomings in tracking to the global maximum power point(GMPP),resulting in a dramatic decrease in output power.In order to solve the above problems,intelligent algorithms are used in MPPT.However,the existing intelligent algorithms have some disadvantages,such as slow convergence speed and large search oscillation.Therefore,an improved whale algorithm(IWOA)combined with the P&O(IWOA-P&O)is proposed for the MPPT of PV power generation in this paper.Firstly,IWOA is used to track the range interval of the GMPP,and then P&O is used to accurately find the MPP in that interval.Compared with other algorithms,simulation results show that this method has an average tracking efficiency of 99.79%and an average tracking time of 0.16 s when tracking GMPP.Finally,experimental verification is conducted,and the results show that the proposed algorithm has better MPPT performance compared to popular particle swarm optimization(PSO)and PSO-P&O algorithms.

Probabilistic Global Maximum Power Point Tracking Algorithm for Continuously Varying Partial Shading Conditions on Autonomous PV Systems

A photovoltaic (PV) string with multiple modules with bypass diodes frequently deployed on a variety of autonomous PV systems may present multiple power peaks under uneven shading. For optimal solar harvesting, there is a need for a control schema to force the PV string to operate at global maximum power point (GMPP). While a lot of tracking methods have been proposed in the literature, they are usually complex and do not fully take advantage of the available characteristics of the PV array. This work highlights how the voltage at operating point and the forward voltage of the bypass diode are considered to design a global maximum power point tracking (GMPPT) algorithm with a very limited global search phase called Fast GMPPT. This algorithm successfully tracks GMPP between 94% and 98% of the time under a theoretical evaluation. It is then compared against Perturb and Observe, Deterministic Particle Swarm Optimization, and Grey Wolf Optimization under a sequence of irradiance steps as well as a power-over-voltage characteristics profile that mimics the electrical characteristics of a PV string under varying partial shading conditions. Overall, the simulation with the sequence of irradiance steps shows that while Fast GMPPT does not have the best convergence time, it has an excellent convergence rate as well as causes the least amount of power loss during the global search phase. Experimental test under varying partial shading conditions shows that while the GMPPT proposal is simple and lightweight, it is very performant under a wide range of dynamically varying partial shading conditions and boasts the best energy efficiency (94.74%) out of the 4 tested algorithms.

Acquisition,Pointing and Tracking System for Shipborne Space Laser Communication without Prior Information

A space laser communication acquisition,pointing and tracking(APT)system based on the beacon laser is designed without prior information.And then,a new target scanning method and a pointing and tracking algorithm are proposed.The target scanning mode is the round-trip triangular wave scanning,and it means that scanning track of the PAN-TILT platform follows the triangular wave repeatedly.For the pointing and tracking algorithm,the beacon laser is used as the auxiliary aiming light source.The position of the beacon laser in the viewfield of the complementary metal oxide semiconductor(CMOS)camera is calculated by the centroid algorithm.In order to realize the target tracking,the joint control method of the angle control and the angular velocity control is used.The simulation and experimental results show that the APT system can achieve full coverage scanning in the scanning area and capture the target in one scanning cycle successfully.After capturing the PAN-TILT platform,the pointing and tracking algorithm can track the PAN-TILT platform quickly and accurately,and the tracking accuracy is up to 0.22 mrad.

Comprehensive review and performance evaluation of maximum power point tracking algorithms for photovoltaic system

A photovoltaic array is environmentally friendly and a source of unlimited energy generation.However,it is presently a costlier energy generation system than other non-renewable energy sources.The main reasons are seasonal variations and continuously changing weather conditions,which affect the amount of solar energy received by the solar panels.In addition,the non-linear characteristics of the voltage and current outputs along with the operating environment temperature and variation in the solar radiation decrease the energy conversion capability of the photovoltaic arrays.To address this problem,the global maxima of the PV arrays can be tracked using a maximum power point tracking algorithm(MPPT)and the operating point of the photovoltaic system can be forced to its optimum value.This technique increases the efficiency of the photovoltaic array and minimizes the cost of the system by reducing the number of solar modules required to obtain the desired power.However,the tracking algorithms are not equally effective in all areas of application.Therefore,selecting the correct MPPT is very critical.This paper presents a detailed review and comparison of the MPPT techniques for photovoltaic systems,with consideration of the following key parameters:photovoltaic array dependence,type of system(analog or digital),need for periodic tuning,convergence speed,complexity of the system,global maxima,implemented capacity,and sensed parameter(s).In addition,based on real meteorological data(irradiance and temperature at a site located in Addis Ababa,Ethiopia),a simulation is performed to evaluate the performance of tracking algorithms suitable for the application being studied.Finally,the study clearly validates the considerable energy saving achieved by using these algorithms.

Maximum Power Point Tracking Control Using Neural Networks for Stand-Alone Photovoltaic Systems

The employment of maximum power point tracking techniques in the photovoltaic power systems is well known and even of immense importance. There are various techniques to track the maximum power point reported in several literatures. In such context, there is an increasing interest in developing a more appropriate and effective maximum power point tracking control methodology to ensure that the photovoltaic arrays guarantee as much of their available output power as possible to the load for any temperature and solar radiation levels. In this paper, theoretical details of the work, carried out to develop and implement a maximum power point tracking controller using neural networks for a stand-alone photovoltaic system, are presented. Attention has been also paid to the command of the power converter to achieve maximum power point tracking. Simulations results, using Matlab/Simulink software, presented for this approach under rapid variation of insolation and temperature conditions, confirm the effectiveness of the proposed method both in terms of efficiency and fast response time. Negligible oscillations around the maximum power point and easy implementation are the main advantages of the proposed maximum power point tracking (MPPT) control method.

Quadrature Kalman Filter(QKF) and Reduced Quadrature Kalman Filter(R-QKF)in Ballistic Target Tracking

Recently there have been researches about new efficient nonlinear filtering techniques in which the nonlinear filters generalize elegantly to nonlinear systems without the burdensome lineafization steps. Thus, truncation errors due to linearization can be compensated. These filters include the unscented Kalman filter （UKF）, the central difference filter （CDF） and the divided difference filter （DDF）, and they are also called Sigma Point Filters （SPFs） in a unified way. For higher order approximation of the nonlinear function. Ito and Xiong introduced an algorithm called the Gauss Hermite Filter, which is revisited in [5]. The Gauss Hermite Filter gives better approximation at the expense of higher computation burden, although it＇s less than the particle filter. The Gauss Hermite Filter is used as introduced in [5] with additional pruning step by adding threshold for the weights to reduce the quadrature points.

Modeling and small-signal stability analysis of doubly-fed induction generator integrated system

Owing to their stability,doubly-fed induction generator(DFIG)integrated systems have gained considerable interest and are the most widely implemented type of wind turbines and due to the increasing escalation of the wind generation penetration rate in power systems.In this study,we investigate a DFIG integrated system comprising four modules:(1)a wind turbine that considers the maximum power point tracking and pitch-angle control,(2)induction generator,(3)rotor/grid-side converter with the corresponding control strategy,and(4)AC power grid.The detailed small-signal modeling of the entire system is performed by linearizing the dynamic characteristic equation at the steady-state value.Furthermore,a dichotomy method is proposed based on the maximum eigenvalue real part function to obtain the critical value of the parameters.Root-locus analysis is employed to analyze the impact of changes in the phase-locked loop,short-circuit ratio,and blade inertia on the system stability.Lastly,the accuracy of the small-signal model and the real and imaginary parts of the calculated dominant poles in the theoretical analysis are verified using PSCAD/EMTDC.

Verification of Dosimetric and Positional Accuracy of Dynamic Tumor Tracking Intensity Modulated Radiation Therapy

Purpose: We performed both, dosimetric and positional accuracy verification of dynamic tumor tracking (DTT) intensity modulated radiation therapy (IMRT), with the Vero4DRT system using a moving phantom (QUASAR respiratory motion platform;QUASAR phantom) and system log files. Methods: The QUASAR phantom was placed on a treatment couch. Measurement of the point dose and dose distribution was performed for conventional IMRT, with the QUASAR phantom static and moving;for DTT IMRT, this was performed with the phantom moving for pyramid shaped, prostate, paranasal sinus, and pancreas targets. The QUASAR phantom was driven by a sinusoidal signal in the superior-inferior direction. Furthermore, predicted positional errors induced by the Vero4DRT system and mechanical positional errors of the gimbal head, were calculated using the system log files. Results and Conclusion: For DTT IMRT, the dose at the evaluation point was within 3% compared with the verification plan, and the dose distribution in the passing rates of γ was 97.9%, with the criteria of 3% dose and 3 mm distance to agreement. The position error calculated from the log files was within 2 mm, suggesting the feasibility of employing DTT IMRT with high accuracy using the Vero4DRT system.

Enhanced Perturb and Observe Control Algorithm for a Standalone Domestic Renewable Energy System

The generation of electricity,considering environmental and eco-nomic factors is one of the most important challenges of recent years.In this article,a thermoelectric generator(TEG)is proposed to use the thermal energy of an electric water heater(EWH)to generate electricity independently.To improve the energy conversion efficiency of the TEG,a fuzzy logic con-troller(FLC)-based perturb&observe(P&O)type maximum power point tracking(MPPT)control algorithm is used in this study.An EWH is one of the major electricity consuming household appliances which causes a higher electricity price for consumers.Also,a significant amount of thermal energy generated by EWH is wasted every day,especially during the winter season.In recent years,TEGs have been widely developed to convert surplus or unused thermal energy into usable electricity.In this context,the proposed model is designed to use the thermal energy stored in the EWH to generate electricity.In addition,the generated electricity can be easily stored in a battery storage system to supply electricity to various household appliances with low-power-consumption.The proposed MPPT control algorithm helps the system to quickly reach the optimal point corresponding to the maximum power output and maintains the system operating point at the maximum power output level.To validate the usefulness of the proposed scheme,a study model was developed in the MATLAB Simulink environment and its performance was investigated by simulation under steady state and transient conditions.The results of the study confirmed that the system is capable of generating adequate power from the available thermal energy of EWH.It was also found that the output power and efficiency of the system can be improved by maintaining a higher temperature difference at the input terminals of the TEG.Moreover,the real-time temperature data of Abha city in Saudi Arabia is considered to analyze the feasibility of the proposed system for practical implementation.

基于改进黏菌算法的光伏多峰值MPPT控制

针对传统最大功率点跟踪技术在局部遮阴等天气条件下存在无法追踪到全局最大功率点的问题,提出一种基于改进黏菌算法的MPPT控制。首先,对太阳电池模型及多峰值特性进行分析;其次,在黏菌算法中引入领导者策略和基于最优个体的凸透镜反向学习策略,在提高算法计算精度、收敛速度的同时克服了算法易“早熟”现象;最后,根据光伏阵列最大功率输出特性分别确定算法优化模型、初始化位置及重启机制。仿真与实验结果表明:基于改进黏菌算法的MPPT控制能快速、准确地跟踪到全局最大功率点,有效规避陷入局部最优问题,提高了光伏系统的转换效率。

基于SSA-ELM神经网络控制器的光伏MPPT方法

光伏电池板所处环境的非线性变化使得光伏电池的功率保持在最大功率点(maximum power point,MPP)非常困难。传统的最大功率点跟踪(maximum power point tracking,MPPT)方法普遍存在技术缺陷,无法满足当前需求。针对光伏发电MPPT问题,该文提出了一种基于麻雀搜索算法优化的极限学习机(sparrow search algorithm-extreme learning machine,SSA-ELM)神经网络控制器的MPPT方法。与传统技术相比,该MPPT方法在稳定性、速度、超调和MPP的振荡等方面的效果均较好。使用MATLAB/Simulink平台进行仿真实验,验证了所提控制策略及理论分析的正确性。

基于改进布谷鸟搜索算法的光伏MPPT控制

复杂阴影情况下,光伏阵列的P-V特性曲线会出现多个峰值,传统的MPPT算法因不能准确识别局部峰值和全局峰值,而无法进行复杂阴影情况下的最大功率点跟踪。针对传统布谷鸟搜索(Cuckoo Search,CS)算法因鸟窝之间缺乏交流能力导致可能陷入局部最优的问题,提出了一种多策略改进布谷鸟搜索(EGICS)算法。将传统CS算法中发现概率值的选择自适应变化,提高算法的搜索能力;将步长因子自适应化,提高算法的收敛速度;引入高斯扰动和精英反向学习策略,增加种群多样性,避免算法陷入局部最优。对EGICS算法在单峰和多峰函数中进行性能测试,并将其应用于光伏系统MPPT控制中进行仿真验证。仿真结果表明,EGICS算法在收敛速度、跟踪精度以及动态稳定三个方面有更好的效果。

基于混合算法的多峰值MPPT控制

针对光照不均匀时光伏阵列输出呈现非线性、多峰值的问题,提出一种基于自然选择粒子群(SelPSO)算法结合电导增量法(INC)的多峰值最大功率点追踪(MPPT)算法。SelPSO算法通过淘汰和替换迭代过程中适应度低的粒子,更快、更准确地完成对全局最大值点的搜索;使用INC进行局部跟踪,有效减少寻优过程中的功率振荡,达到最大功率点跟踪的目的。利用MATLAB/Simulink进行仿真试验。结果表明:与INC相比,SelPSO算法的功率振荡由12 W降至0.05 W;与PSO算法相比,跟踪时间由0.15 s缩短至0.07 s。该混合算法在复杂环境下具有较优的跟踪速度、收敛精度以及较低的功率波动。

面向对海监视的舰船目标跟踪与航迹融合数据集

对海监视中航迹实时关联与轨迹融合任务是安全防控、区域态势监视、远程精确打击等军民应用领域的热点和难点问题,高质量的数据集对推动目标跟踪与融合技术在该领域的研究有重要作用。本研究针对目标跟踪与融合领域技术研究的数据需求以及目前公开数据集所存在的数据缺乏、场景设计针对性差、数据格式单一、数据描述不全等问题,通过仿真软件对复杂场景中多传感器多目标探测数据进行仿真,提供了一套面向典型对海监视场景(以舰船为探测对象的2D雷达与侦察传感器﹝ESM﹞)的目标跟踪与航迹融合数据集。其中仿真软件包括剧情发生器和传感器模拟器两部分,是一套成熟的目标跟踪场景仿真环境,提供逼真的探测数据模拟能力。本数据集涵盖的传感器对象包括2D雷达与侦察传感器,目标包括典型的海上舰船类别,并支持携带辐射源配置,设计了高速运动、密集交通、多传感器数据融合、特定舰船侦测和交叉定位等多种典型场景。本数据集中共包含368155条目标点迹,舰船数量为101条,时间范围15000秒,数据格式符合实际设备上报情景、探测误差模型符合实际。本数据集通过对数据误差进行正态性检验、对检测率、虚警率的场景检验以及实地调研,完成了对数据的准确性评估与数据完备性控制,可为舰船目标跟踪、轨迹融合等算法研究与验证提供基础数据。

农田灌溉光伏水泵系统性能测试分析

【目的】探究农田灌溉光伏水泵系统综合用能需求特性,提高该系统性能可靠性和实用性。【方法】基于高效水泵和研发的逆变器,构建了农田灌溉光伏水泵系统,结合系统装置构成与运行特点,对不同扬程运行工况下的电性能参数和扬水效率特性及水泵流量与功率特性等进行测试分析。【结果】在一定太阳辐射强度范围内,调速运行的水泵流量与输出频率有较好一致性;稳定运行时段的水泵流量可达到2 m^(3)·h^(-1);定扬程24.8 m下,系统最大扬水效率达12.7%,日平均扬水效率11.6%,日扬水量13.1 m^(3);当扬程降低到14.0 m时,最大扬水效率和日平均效率分别比前者低3.2%和3.6%,表明减低扬程并不一定能提高系统扬水效率,但对输出流量有影响。【结论】该农田灌溉光伏水泵系统配置稳态和动态性能良好,扬水能力可满足省水微灌和植被绿化等基本农业生产需要。

基于三维激光点云的序列运动图像点目标快速跟踪方法

由于现有方法未充分考虑小目标和遮挡目标检测的问题,导致目标跟踪效果不佳,由此针对点目标跟踪较为困难的问题,提出基于三维激光点云的序列运动图像点目标快速跟踪方法。首先下采样序列运动图像三维激光点云并去除其中的地面数据,通过动态阈值改进欧式聚类方法,分割图像为目标和背景,然后改进SECOND算法,在目标检测阶段融入自适应空间特征融合模块和二维卷积神经网络,同时采用3D DIoU替代Smooth L1作为损失函数,提升SECOND算法的目标检测性能,最后在激光雷达坐标系中构建各点目标的三维中心,利用3D卡尔曼滤波器连续跟踪目标,以交并比和欧式距离为度量标准,通过贪婪算法匹配最近邻目标,实现序列运动图像点目标快速跟踪。实验结果表明,所提方法IoU值更高,可达到0.971,且对目标的跟踪更理想。

基于MPPT控制的两级式直流孤岛检测方法研究

针对主动式孤岛检测方法存在扰动同步注入、影响电网供电质量等问题,提出了一种基于最大功率点跟踪(MPPT)控制的两级式直流孤岛检测方法。该方法通过检测并网变换器直流侧电流来判断疑似孤岛,然后利用疑似孤岛信号触发电压扰动的注入使得孤岛后的公共耦合点(PCC)电压出现特定频率的波动。由于扰动信号的注入受疑似孤岛信号控制,减少了正常状态下扰动的注入时长,有效降低对系统电能质量的影响。此外建立小信号模型分析了耦合点电压对扰动分量的频域特性,选取扰动信号的最优频率。最后通过仿真与实验验证了所提方法在单机与多机工况下的有效性。

面向光伏能量收集应用的实时MPPT预估算法研究

对于环境中存在的各种类型能量源,其往往具有不同的阻抗特性以及输出功率范围。为了提高能量收集系统的能量萃取能力,合理的接口电路设计是关键。基于此,通过对环境中光伏(Photovoltaic,PV)能量源微弱直流特性以及高效率收集和转化的研究,在传统开路电压法(Open-Circuit Voltage,OCV)的基础上,结合输入电压纹波控制,提出了一种可实时最大功率点追踪(Maximum Power Point Tracking,MPPT)的预估算法。该预估算法根据能量源的输出特性,采用了分数开路电压法(Fractional Open-Circuit Voltage,FOCV),并根据纹波大小动态调节变换器的工作模式,实现阻抗匹配。为了尽可能减小因采样带来的能量损失,采用可片上全集成的较小的采样电容,并逐周期的进行开路电压采样和计算,实现了对源功率变化的高精度追踪。仿真结果表明,所提出的追踪算法能够实时监测能量源的状态,具有高的追踪速度和追踪精度,且采样时间仅需100 ns。能量源功率在1μW~10 mW范围内变化时,最短的追踪时间仅需4.37μs,追踪精度可达99.7%。

基于ROS-Matlab的移动机器人仿真研究

结合Linux下ROS系统高性能的仿真工具和跨平台兼容性,以及Matlab强大的计算能力、丰富的工具箱和函数库,通过建立ROS-Matlab的仿真控制系统,对移动机器人的关键技术进行研究。文中介绍了ROS-Matlab系统的框架和功能,首先,使用Gazebo构建2D仿真室内环境,通过Solidworks创建移动机器人模型,并将该模型以URDF文件形式导入ROS环境中;其次,利用SLAM_gmapping算法对仿真室内环境进行扫描建图,由Simulink发布目标点坐标和目标点导航话题,控制移动机器人完成导航任务;最后,由Simulink发布轨迹跟踪话题,控制移动机器人进行轨迹跟踪。通过仿真验证,由所建地图、目标点导航和轨迹跟踪曲线说明仿真系统的可行性,为机器人研究提供参考。