Synthesis and characterization of Ce_(0.8)Sm_(0.2)O_(1.9) nanopowders using an acrylamide polymerization process

Ce0.8Sm0.2O1.9(SDC) nanopowders were synthesized by an acrylamide polymerization process.The XRD results showed that SDC powders prepared at 700 °C possessed a cubic fluorite structure.Transmission electron microscopy(TEM) indicated that the particle sizes of powders were in the range of 10-15 nm.A 98.3% of theoretical density was obtained when the SDC pellets were sintered at 1350 °C for 5 h,indicating that the powders had good sinterability.The conductivity of the sintered SDC ceramics was 0.019 S/cm at 6...

STUDIES ON THE KINETICS AND INITIATION MECHANISM OF ACRYLAMIDE POLYMERIZATION USING CERIC/ACETOACETANILIDE SYSTEM AS INITIATOR

It is found that acetoacetanilide possesses very high promoting reactivity towards ceric ion in initiating polymerization of vinyl monomer. The kinetics of acrylamide polymerization and the activation energies were studied. The initiation mechanism of ceric/acetoacetanilide is proposed on the basis of experimental results of FT-IR and ESR.

PHOTOSENSITIVITY OF CERIC ION INITIATED ACRYLAMIDE POLYMERIZATION

Polymerization of acrylamide initiated by ceric ammonium nitrate alone has been studied in aqueous medium. The effects of UV light irradiation on the initial rates of polymerization, the activation energy and on the polymer molecular weights have been investigated. Compared with that in the dark, the rate of polymerization under UV light was accelerated to eleven times higher, and the overall activation energy was lowered markedly.

Graft Polymerization of Acrylic Acid and Acrylamide onto BOPET Corona Films

The graft polymerization of acrylic acid(A) and acrylamide(B) was carried out onto bi-oriented polyester BOPET corona film.The influence of monomer concentration,reducer concentration and reaction time on the graft polymerization was investigated.The surface tension of the films increased with an increase of monomer concentration,till the concentration of monomer A reached 1.5×10^(-2)g/mL and the concentration of monomer B reached 4.0×10^(-2)g/mL.The surface tension of the films reached a maximum value at 7×10^(-4)M of reducer concentration and subsequently decreased with further increase in reducer concentration.The surface tension of the films increased with the increase of the reaction time apparently within 50min.The grafted corona BOPET films were characterized with IR and XPS.The presence of graft on the film surface was confirmed.The attenuation experiments on grafted corona BOPET films in air at 50℃ and in water were carried out to investigate the persistence of graft polymerization of acrylic acid and arylamide onto BOPET corona films.

STUDIES ON THE INITIATION MECHANISM OF CERIC ION AND ACETYLACETONE REDOX SYSTEM IN VINYL POLYMERIZATION

The initiation mechanism of acrylamide (AAM)polymerization using ceric ion/acetylacetone system as an initiator has been studied. The redox polymerization was revealed by the low value of overall activation energy of AAm polymerization. The structure of free radicals formed from above-mentioned initiation sytem were detected by radical trapping and ESR spectra techniques and the end groups of polymers obtained were determined by FT-IR spectra analysis method. Based on these results the initiation mechanism is proposed.

VINYL RADICAL POLYMERIZATION INITIATED WITH CERIC ION AND N-(SUBSTITUTED PHENYL) ACETAMIDE SYSTEMS

The polymerization of acrylamide (AAM)in H_2O/DMF or in H_2O/CH_3CN mixed solvent initiated with ceric ion (Ce^(4+) )/N-(substituted phenyl)-acetamide systems have been studied. The redox polymerization was revealed by the low value of overall activation energy (E_α) of AAM polymerization using ceric ion/N-(substituted phenyl) acetamide system as an initiator. The end group of polymer formed was detected by IR spectrum analysis method, it revealed the presence of N-(m-acetoxy-methylphenyl) acetamide (m-AAe) moiety end group in the polymer obtained with ceric ion/m-AAe initiation system.

Computer Simulation and Experimental Investigations of Phenobarbital Molecular Imprinting System

The interaction process between the phenobarbital（PHN） and acrylamide（AM） was studied using the M062X/6-31G（d,p） method. The PHN and AM were used as the template and functional monomer,respectively. The molecular electrostatic potential（MEP） was simulated for predicting the reactive sites. The atoms in molecules theory helped to reveal the imprinting mechanism and optimize the molar ratios for PHN and AM. The molecular imprinted polymers（MIPs） containing PHN were synthesized through the precipitation polymerization. The diameter range of the obtained MIPs was from 150 to 390 nm. According to the computational results,MIPs with the molar ratio of PHN and AM equal to 1：6 showed high selective adsorption for PHN. The apparent maximum adsorption quantity（Q_（max）） of MIPs toward PHN was 7.9 mg/g,and the Qmax of nonimprinted polymer microspheres（NIPs） was 3.2 mg/g. Herein,the studies can provide theoretical and experimental references for the controllable fabrication of MIPs.

SYNTHESIS OF STRONTIUM-AND MAGNESIUM-DOPED LANTHANUM GALLATE BY GLYCINE-NITRATE COMBUSTION METHOD

Sr- and Mg-doped lanthanum gallate powders with the composition of La0.55Sr0.15Ga0.85Mg0.15O2.85were synthesized by a glycine-nitrate combustion method. Powders prepared under different fuel combustion conditions were investigated by XRD and TEM. The results show that, under slightly rich fuel condition, the product powders contain less impurity phases, and powders prepared by the glycine-nitrate combustion contain far less impurity phases and have smaller particle sizes than those prepared by solid-state reaction method or acrylamide polymerization technique.

Tough Polyion Complex Hydrogel Films of Natural Polysaccharides

The developments of tough hydrogels in recent years have greatly expanded the applications of hydrogels as structural materials. However, most of the tough hydrogels are made of synthetic polymers. To develop biopolymer-based tough hydrogels has both fundamental and practical significances. Here we report a series of polysaccharides-based tough hydrogel films prepared by polyion complexation and solvent evaporation of chondroitin sulfate（CS） and protonated chitosan（CHT） solutions with different weight ratios. The obtained CS/CHT gel films with thickness of 40-80 μm and water content of 66 wt%-81 wt% possess excellent mechanical properties, with tensile breaking stress and breaking strain being 0.4-3 MPa and 160%-320%, respectively. We found that in the mixture solutions there are large amounts of excess CHT in terms of charges; after swelling the films in water, the acetic acid, which is used to protonate the amino groups of CHT, diffuses out of the gel matrix, enhancing the intermolecular interactions between CHT molecules and thus improving the mechanical properties of gel films, besides the ionic bonds between CS and CHT. Antimicrobial tests also showed that the gel films with low weight ratio of CS to CHT, corresponding to the case with excess CHT, have evident antimicrobial effect. These CS/CHT gel films with good mechanical properties and antimicrobial effect should extend the applications of hydrogels in biomedical fields.