The emulsion polymerization of N-phenylmaleimide, Styrene and acrylonitrile was studied. The thermal property of this copolymer was measures by dynamic thermomechanical analysis(DMA). The mechanical properties, such a...The emulsion polymerization of N-phenylmaleimide, Styrene and acrylonitrile was studied. The thermal property of this copolymer was measures by dynamic thermomechanical analysis(DMA). The mechanical properties, such as tensile strength, hardness and fie-cural Strength were StUdied experimentally. The results indicated that not only the monomer component but also the polymerization technologies have effect on the properties of the copolymer. The optimum monomer content and suitable polymerization method were obtained.展开更多
The residual levels and migration behavior of volatile substances were detected using HS-GC/MS for acrylonitrile-butadiene-styrene copolymer (ABS) toys, thermoplastic elastomer toys, and rubber toys made from 1,3-buta...The residual levels and migration behavior of volatile substances were detected using HS-GC/MS for acrylonitrile-butadiene-styrene copolymer (ABS) toys, thermoplastic elastomer toys, and rubber toys made from 1,3-butadiene and styrene found on the Japanese market. The maximum residual level of these volatile substances was 2600 μg/g of styrene in ABS toys. In particular, the levels of known carcinogens 1,3-butadiene, benzene, and acrylonitrile are 5.3, 2.5 and 55 μg/g, which are much lower than the EU limit of 0.1%. Furthermore, some volatile substances migrated from ABS toys into water in amounts of 3 -40 ng/mL. Thermoplastic elastomer toys and rubber toys contained these volatile substances at significantly lower levels than ABS toys.展开更多
Amphiphilic graft copolymers are excellent additives for the development of antifouling membranes by nonsolvent induced phase separation. We report a convenient approach to the synthesis of novel graft copolymers with...Amphiphilic graft copolymers are excellent additives for the development of antifouling membranes by nonsolvent induced phase separation. We report a convenient approach to the synthesis of novel graft copolymers with hydrophobic polyacryloni- trile (PAN) backbones and hydrophilic poly(2-hydroxyethyl methacrylate) (PHEMA) side chains. Atom transfer radical polymerization (ATRP) of 2-hydroxyethyl methacrylate was carried out with poly(acrylonitrile-co-p-chloromethyl styrene) (PAN-co-PCMS) as a macroinitiator in the presence of CuC1/2,2'-bipyridine at 50 ~C in dimethyl sulfoxide. Kinetics of the graft polymerization was also evaluated. The synthesis of poly(acrylonitrile-co-p-chloromethyl styrene-g-2-hydroxyethyl methacrylate) (PAN-co-(PCMS-g-PHEMA)) can be relatively controlled when CMS (the ATRP sites) unit in the macroinitia- tor is around 5 mol%. Both the macroinitiators and graft copolymers were characterized by FTIR, NMR and GPC. The surface morphology and wettability of the copolymer films were studied by AFM and water contact angle measurement, respectively. We demonstrate that phase segregation between the PAN-co-PCMS backbones and the PHEMA side chains takes place and the surface hydrophilicity of the graft copolymers increases with the length of the PHEMA side chains. Because these am- phiphilic graft copolymers can be synthesized in mass, they will be useful as latent additives for the fabrication of advanced PAN separation membranes.展开更多
通过熔体流动速率、热变形温度和力学性能等指标变化评价了ASA胶含量及用量对PC/ASA合金性能的影响。结果表明,随着ASA用量的增加,合金的热变形温度下降;可以通过ASA胶含量和用量调节合金的流动性;不论合金的组成,ASA胶含量为30%的PC/AS...通过熔体流动速率、热变形温度和力学性能等指标变化评价了ASA胶含量及用量对PC/ASA合金性能的影响。结果表明,随着ASA用量的增加,合金的热变形温度下降;可以通过ASA胶含量和用量调节合金的流动性;不论合金的组成,ASA胶含量为30%的PC/ASA合金的低温冲击强度最高;当PC/ASA比例为7∶3,ASA胶含量为30%时,PC/ASA合金的低温冲击强度最高为36 k J/m^(2)。展开更多
文摘The emulsion polymerization of N-phenylmaleimide, Styrene and acrylonitrile was studied. The thermal property of this copolymer was measures by dynamic thermomechanical analysis(DMA). The mechanical properties, such as tensile strength, hardness and fie-cural Strength were StUdied experimentally. The results indicated that not only the monomer component but also the polymerization technologies have effect on the properties of the copolymer. The optimum monomer content and suitable polymerization method were obtained.
文摘The residual levels and migration behavior of volatile substances were detected using HS-GC/MS for acrylonitrile-butadiene-styrene copolymer (ABS) toys, thermoplastic elastomer toys, and rubber toys made from 1,3-butadiene and styrene found on the Japanese market. The maximum residual level of these volatile substances was 2600 μg/g of styrene in ABS toys. In particular, the levels of known carcinogens 1,3-butadiene, benzene, and acrylonitrile are 5.3, 2.5 and 55 μg/g, which are much lower than the EU limit of 0.1%. Furthermore, some volatile substances migrated from ABS toys into water in amounts of 3 -40 ng/mL. Thermoplastic elastomer toys and rubber toys contained these volatile substances at significantly lower levels than ABS toys.
基金supported by the National Natural Science Foundation of China (21174124)
文摘Amphiphilic graft copolymers are excellent additives for the development of antifouling membranes by nonsolvent induced phase separation. We report a convenient approach to the synthesis of novel graft copolymers with hydrophobic polyacryloni- trile (PAN) backbones and hydrophilic poly(2-hydroxyethyl methacrylate) (PHEMA) side chains. Atom transfer radical polymerization (ATRP) of 2-hydroxyethyl methacrylate was carried out with poly(acrylonitrile-co-p-chloromethyl styrene) (PAN-co-PCMS) as a macroinitiator in the presence of CuC1/2,2'-bipyridine at 50 ~C in dimethyl sulfoxide. Kinetics of the graft polymerization was also evaluated. The synthesis of poly(acrylonitrile-co-p-chloromethyl styrene-g-2-hydroxyethyl methacrylate) (PAN-co-(PCMS-g-PHEMA)) can be relatively controlled when CMS (the ATRP sites) unit in the macroinitia- tor is around 5 mol%. Both the macroinitiators and graft copolymers were characterized by FTIR, NMR and GPC. The surface morphology and wettability of the copolymer films were studied by AFM and water contact angle measurement, respectively. We demonstrate that phase segregation between the PAN-co-PCMS backbones and the PHEMA side chains takes place and the surface hydrophilicity of the graft copolymers increases with the length of the PHEMA side chains. Because these am- phiphilic graft copolymers can be synthesized in mass, they will be useful as latent additives for the fabrication of advanced PAN separation membranes.
文摘通过熔体流动速率、热变形温度和力学性能等指标变化评价了ASA胶含量及用量对PC/ASA合金性能的影响。结果表明,随着ASA用量的增加,合金的热变形温度下降;可以通过ASA胶含量和用量调节合金的流动性;不论合金的组成,ASA胶含量为30%的PC/ASA合金的低温冲击强度最高;当PC/ASA比例为7∶3,ASA胶含量为30%时,PC/ASA合金的低温冲击强度最高为36 k J/m^(2)。
