The Influence of Dry or Wet Activating Process to the Electrochemical Features of Biowaste Carbon

The utilization of biowaste to the activated carbon(AC)as electrode material is conducive to alleviating the energy crisis and promoting the high value-added.The popular KOH activation has been applied for years,but rare report clarified the difference of dry and wet activation,with which the batch producing technique could be different.Here nitrogen doped hierarchical AC was derived from wood chip by a wet or dry KOH activation.The surface area,framework structure and surface feature were characterized to reveal the effect of wet and dry activation.1.44 at%of nitrogen doped AC was made by dry KOH activation,which was higher than the AC derived from wet KOH activation with 1.36 at%of nitrogen.Their electrochemical properties were investigated in 6 mol L^(-1)of KOH,the capacitance of wAC was 401 F g^(-1)at 0.5 A g^(-1),but dAC possessed a capacitance of 215 F g^(-1).These indicated that AC obtained by using wet KOH activation displayed a potential application in energy field.

Study Progress Analysis of Effluent Quality Prediction in Activated Sludge Process Based on CiteSpace

In this paper, CiteSpace, a bibliometrics software, was adopted to collect research papers published on the Web of Science, which are relevant to biological model and effluent quality prediction in activated sludge process in the wastewater treatment. By the way of trend map, keyword knowledge map, and co-cited knowledge map, specific visualization analysis and identification of the authors, institutions and regions were concluded. Furthermore, the topics and hotspots of water quality prediction in activated sludge process through the literature-co-citation-based cluster analysis and literature citation burst analysis were also determined, which not only reflected the historical evolution progress to a certain extent, but also provided the direction and insight of the knowledge structure of water quality prediction and activated sludge process for future research.

Effects of compressing and remelting in SIMA processing on semi-solid structure evolution of an Al-Zn wrought alloy

Structure evolution of an Al-Zn wrought alloy in remelting processing in thestrain induced melt activated (SIMA) serai-solid procedure was observed, and effects of factors, theremelting temperature, the holding time, and the compression strain, on structures and grain sizesof the alloy were investigated. The results show that (1) the proper temperature of remelting is inthe range of 610 to 615℃; (2) the grain size in specimen with greater compression strain is smallerthan that with smaller compression strain in condition of the same remelting temperature andholding time, and the grain size in local area with great local equivalent strain is smaller thanthat with small one; (3) liquid occurs in form of cluster in matrix during remelting and itsquantity increases with remelting time increasing; liquid in specimen with great compression strainoccurs earlier than that with small one, and quantity of liquid in the center of specimen withgreater local equivalent strain is greater than that in the two ends of it; (4) distortion energyafter deforming in matrix of the alloy is the significant factor to activate melting of matrix atlocal area with great local equivalent strain.

Intercross real-time control strategy in alternating activated sludge process for short-cut biological nitrogen removal treating domestic wastewater

To develop technically feasible and economically favorable dynamic process control(DPC)strategies for an alternating activated sludge(AAS)system,a bench-scale continuous-flow alternating aerobic and anoxic reactor,performing short-cut nitrogen removal from real domestic wastewater was operated under different control strategies for more than five months.A fixed-time control(FTC) study showed that bending-points on pH and oxidation-reduction potential(ORP)profiles accurately coincided with the major biologic...

Comparison of heavy metal removal efficiencies in four activated sludge processes

The removal efficiencies of heavy metals(As, Cr, Cu, Ni, Pb and Zn) were investigated in the 17 operating municipal wastewater treatment plants(WWTPs) and compared with those in four main activated sludge processes. Significant differences of heavy metal removal efficiencies were observed among four activated sludge processes. The removal efficiency for As(75.5%) in the oxidation ditch(OD) process is significantly higher than that in the conventional activated sludge(CAS) process(38.6%) or sequencing batch reactor(SBR) process(51.4%). The mean removal efficiencies for Cu and Ni in the OD process are 90.5% and 46.7%, respectively, while low mean removal efficiencies are observed for Cu(69.9%) and Ni(16.5%), respectively, in the SBR process. The removal efficiencies for Cu and Ni in the OD process are significantly higher than those in the anaerobic-anoxic-oxic(A2-O) process. These results highlight the differences of removal efficiencies for heavy metals in different processes and should be considered when selecting a wastewater treatment process.

Effect of compression ratio on microstructure evolution of Mg−10%Al−1%Zn−1%Si alloy prepared by SIMA process

A new Mg−10%Al−1%Zn−1%Si alloy with non-dendritic microstructure was prepared by strain induced melt activation(SIMA)process.The effect of compression ratio on the evolution of semisolid microstructure of the experimental alloy was investigated.The results indicate that the average size ofα-Mg grains decreases and spheroidizing tendency becomes more obvious with the compression ratios increasing from 0 to 40%.In addition,the eutectic Mg2Si phase in the Mg−10%Al−1%Zn−1%Si alloy transforms completely from the initial fishbone shape to globular shape by SIMA process.With the increasing of compression ratio,the morphology and average size of Mg2Si phases do not change obviously.The morphology modification mechanism of Mg2Si phase in Mg−10%Al−1%Zn−1%Si alloy by SIMA process was also studied.

Dipeptide transport: an active process with energy-and proton-dependence in the human intestinal cell line,Caco-2

Objective: To determine the active process on dipeptide transport with proton-and energy-dependence in Caco-2 cells.Methods: A human intestinal cell monolayer(Caco-2) was used as the in vitro model of human small intestine and cephalexin as the model substrate for dipeptide transporter(PepT1).Caco-2 cells grown on multiwell dishes(24 wells) and Transwell membrane filters were incubated in the culture medium. The transport and uptake experiments of cephalexin across apical membranes were then conducted with different temperature and different pH values.Uptake of cephalexin in Caco-2 cells gsown on multiple well dishes with addition of energy inhibitors(sodium azide,SA and 2,4-dinitrophenol,DNP) were then measured. Results: The accumulation of cephalexin into Caco-2 monolayers increased with the duration of culture.The uptake from the apical surface was markedly influenced by the pH of the apical medium,and the maximal uptake was achieved at pH 5.5;further acidification of the incubation medium may decrease transport of cephalexin despite an increase inward H+ gradient.Cephalexin uptake was linear over the concentration range when the cells were incubated at 4℃ while the uptake rate was enhanced and tended to be saturated as the cephalexin concentration increased when the cells were incubated at 37℃.The kinetic parameters for the cephalexin transport carrier were determined to be: Vmax of(22.173±1.9) nmol/min per mg protein,Km of(2.069±0.9)mol/L,the Kd was estimated to be(0.07±0.02) nmol/min per mg protein per mmol/L.Uptake of cephalexin was markedly inhibited by sodium azide(SA) and 2,4-dinitrophenol(DNP). Conclusion: Cephalexin was transported actively across Caco-2 cells,and the transport process was proton-and energy-dependent.In addition, Caco-2 cells taked up cephalexin by dipeptide transporters that closely resembled the transporters present in the intestine.Caco-2 cells represented an ideal cellular model for future studies of the dipeptide transporter.

Effects of Activated Sintering Process on Properties and Microstructure of W-15Cu Alloy

The effects of activated sintering technology of H2 atmosphere sintering on the microstructure and properties of W-15Cu alloy using ultrafine W-15Cu composite powder fabricated by spray drying calcining-continuous reduction technology were investigated.The experimental results showed that W-15Cu alloy,consolidated by activated sintering technology of H2 atmosphere sintering for 1 h at 1300 ℃,with 98.5 % relative density,transverse rupture strength 1218 MPa,Vickers hardness HV0.5 378,average grain size about 1.2 μm and thermal conductivity 192 W/m·K,was obtained.In comparison to the normal sintering process,activated sintering process to W-15Cu alloy could be achieved at lower sintering temperature.Furthermore,better properties in activated sintered compacts were obtained,and activated sintering process resulted in finer microstructure and excellent properties.

Stoichiometric deduction of activated sludge process for organic carbon and nitrogen removal

The activated sludge process （ASP） is the most generally applied biological wastewater treatment method. The ASP for the removal of organic carbon and nitrogen can be looked as the combination of eight processes. In order to set up an ASP model, the stoichiometric coefficients should be deduced so that the stoichiometric matrix can be presented. The important assumptions and simplifications behind the model for ASP are enumerated. Using the matrix, mass balance equation and consistent units, the stoichiometric coefficients in the eight processes are exclusively deduced one by one.

Microbial Processes in Stratified Lake Doroninskoe(Transbaikal Region)

In recent decades,meromictic ponds attract the attention of researchers in different directions,because here the character of the physical,chemical and biological processes differ from those of typical mixing waters(Kuznetsov,1970;Hutchinson,1969).In Transbaikalia widely distributed soda and salt lakes with different salinity.Notable among them is Lake Doroninskoye,which has a pronounced stratification for a

Combined process of sequencing batch reactor activated sludge process and constructed wetland for domestic wastewater treatment

By combining sequencing batch reactor (SBR) activated sludge process and constructed wetland (CW), this study is to achieve the domestic wastewater treatment. Our purpose was to determine the optimum operating parameters of the combined process. The process involved advantages and shortages of SBR and CW. Under normal temperature, the 3rd cycle (SBR’s operation cycle is 8 h: inflow for 1 h, limited aeration for 3 h, sediment for 1 h, outflow for 1 h, and idling for 2 h; CW’s hydraulic retention time (HRT) is 24.8 h and hydraulic loading is 24.5 m3/m2 d) was the best cyclic mode. The effluents can meet the standard GB/T18921-2002: "The reuse of urban recycling water: water quality standard for scenic environment use". In the 3rd cycle, the efficiency of CW was the maximum, and energy consumption of SBR was the minimum. Under the condition of low dissolved oxygen, the removing efficiency of chemical oxygen demand (COD) and ammonia was not affected obviously. Simultaneously, nitrification and denitrification phenomena occured and phosphorus was absorbed obviously.

Value Analysis among the Parties on Imported Product in Indonesia Using Process Activity Mapping： Freight Forwarder, Distributor, and Retailer

National logistics system in Indonesia can be categorized as inefficient logistics system due to current number of non-value added （NVA） activities. The unreliable National logistics system and the complexity of distribution system are the big obstacles. This study aims to analyze the value and to propose recommendation for further improvement of National distribution system for imported product. This study employed convenience sampling through in-depth interview to analyze the activity in freight forwarder （FF）, distributor and retailer. To demonstrate and analyze the activity process in each party, Process Activity Mapping （PAM） was used as a tool. The study results showed that the delivery speed in Jakarta （8.4 min/km） is slower than that of Surabaya （6.6 min/km）. The government support through creating adequate infrastructure, good bureaucracy system and good collaboration directly affects the activities of FF, distributor and retailer. Improving FF performance in a timely and reliable manner is required to reduce errors that may occur. Moreover, encouraging the practice of cold chain management is also necessary in distributing the product throughout Indonesia. The pull strategy can be chosen by retailer to eliminate storage activity. Meanwhile, the use of information technology （IT） system is essential to encourage better inventory management, database management and sharing information in distributor and retailer stage.

Optimized Synthesis of Carbon Aerogels via Ambient Pressure Drying Process as Electrode for Supercapacitors

Carbon aerogels were synthesized via ambient pressure drying process using resorcinolformaldehyde as precursor and P123 to strengthen their skeletons. CO2 activation technology was implemented to improve surface areas and adjust pore size distribution. The synthesis process was optimized, and the morphology, structure, adsorption properties and electrochemical behavior of different samples were characterized. The CO2-activated samples achieved a high specific capacitance of 129.2 F/g in 6 M KOH electrolytes at the current density of 1 m A/cm^2 within the voltage range of 0-0.8 V. The optimized activation temperature and duration were determined to be 950 ℃ and 4 h, respectively.

Process Management in Insurance Companies

The importance of insurance activity is constantly growing, generating new problems and setting new challenges. One of these challenges is to meet the growing requirements and expectations of customers. This requires the efficient management of insurance companies. This means the necessity of applying modern management concepts, first and foremost, the concept of process management and instruments related to this process. This article describes the results of research on process management in insurance companies operating in Poland that was conducted by the Faculty of Management at the Warsaw University of Technology and presents the concept of the identification of processes carried out in insurance companies encompassing management, basic and auxiliary processes, as well as the objectives of the processes and the relationships between the basic processes and other processes carried out in insurance companies.

Adjusting oxygen vacancies in perovskite LaCoO_(3)by electrochemical activation to enhance the hydrogen evolution reaction activity in alkaline condition

Developing highly-active,earth-abundant non-precious-metal catalysts for hydrogen evolution reaction(HER)in alkaline solution would be beneficial to sustainable energy storage.Perovskite oxides are generally regarded as low-active HER catalysts,due to their inapposite hydrogen adsorption and water dissociation.Here,we report a detailed study on perovskite LaCoO_(3)epitaxial thin films as a model catalyst to significantly enhance the HER performance via an electrochemical activation process.As a result,the overpotential for the activation films to achieve a current density of 0.36 m A/cm^(2)is 238 m V,reduced by more than 200 m V in comparison with that of original samples.Structural characterization revealed the activation process dramatically increases the concentration of oxygen vacancies(Vo)on the surface of LaCoO_(3).We established the relationship between the electronic structure induced by Vo and the enhanced HER activity.Further theoretical calculations revealed that the Vo optimizes the hydrogen adsorption and dissociation of water on the surface of LaCoO_(3)thin films,thus improving the HER catalytic activity.This work may promote a deepened understanding of perovskite oxides for HER mechanism by Vo adjusting and a new avenue for designing highly active electrochemical catalysts in alkaline solution.

Hierarchically designed MoWSe_(2)/WO_(3)/C anode for fast and efficient Na+storage

Exploring anode materials with high energy and power density is one of the critical milestones in developing sodium-ion batteries/capacitors(SIBs/SICs).Here,the Mo and W-based bimetallic organic framework(Mo-W-MOF)with core-shell structure is first formed by a facile strategy,followed by a selenization and carbonization strategy to finally prepare multileveled Mo WSe_(2)/WO_(3)/C anode materials with core-shell petal like curled nanosheet structure.Between the petal(MoSe_(2))-core(WO_(3))structure,the formation of WSe_(2)flakes by partial selenization on the surface of WO_(3)serves as a heterogeneous connection between MoSe_(2)and WO_(3).The enlarged layer distance(0.677 nm)between MoSe_(2)and WSe_(2)can facilitate the rapid transfer of Na+and electrons.The density functional theory(DFT)calculations verify that the Mo WSe_(2)/WO_(3)/C heterostructure performs excellent metallic properties.Ex-situ X-ray diffraction(XRD),X-ray photoelectron spectroscopy(XPS),and transmission electron microscopy(TEM)confirm the activation process from the initial insertion reaction to the later conversion reaction.Resultantly,when employed as the anode of SIBs,a remarkable capacity of 384.3 mA h g-1after 950 cycles at 10 A g^(-1)is performed.Furthermore,the SICs assembled with commercial activated carbon(AC)as the cathode exhibits a remarkable energy density of 81.86 W h kg^(-1)(at 190 W kg^(-1))and 72.83 W h kg^(-1)(at 3800 W kg^(-1)).The unique structural design and the reaction investigation of the electrode process can provide a reference for the development of transition metal chalcogenides anodes.

Evaluation of Estrogenic Activity and Measurement of EDCs in Wastewater Treatment Plants

Correlations between estrogenic activity and DOC/UV260 ratio in wastewater treatment processes were investigated to propose a simple, reliable and comprehensive indicator for the presence of estrogenic substances. Contrary to this, when short-term bioassays such as the E-SCREEN, receptor binding and reporter gene expression assays are used for detecting estrogenic activity in the wastewater sample, they require a long time, at least a few days. The major factors contributing to the estrogenic activity were found to be 17β-estradiol （E2） and estrone （El）. A good relationship between the DOC/ UV260 ratio and the concentration of estrogens （El and E2） in the effluent of the activated sludge process was found： the E2 concentration increased as the DOC/UV260 ratio increased while the E1 concentration decreased. The relative estrogenic activity and DOC/UV260 ratio showed a good correlation （R^2 = 0.84） for all sewage samples except the ozonized samples in the sewage treatment plants. This study shows that the estrogenic compounds are hard to be mineralized by the conventional biological processes. Advanced oxidation processes are required to further remove estrogenic substances in the secondary effluent. By analysis of DOC and UV260, the estrogenic activity in the wastewater can be rapidly estimated.

Oxygen Transfer and Hydrodynamics in a Flexible Fibre Biofilm Reactor for Wastewater Treatment

A flexible fibre biofilm reactor was developed for treatment of organic wastewaters.The hydrodynamic characteristics and mass transfer coefficients of oxygen were studied and compared with those of the conventional activated sludge processes.Tracer experiments were performed to obtain the residence time distributions of the reactors.The results indicated that both reactors could be treated as mixed flow reactors.The effects of flow rates of water and air on the overall mass transfer coefficient of oxygen were investigated,and the correlations between the mass transfer coefficient and the ratio of flow rates were obtained.Compared to the conventional activated sludge reactor,the mass transfer coefficients in the flexible fibre reactor were similar to but slightly lower,and less sensitive to the variation in the ratio of flow rates.It indicated that the fibre packing in the reactor hindered the oxygen transfer to some extent.

Effects of strain-induced melt activation treatment on the microstructure and properties of Zn sacrificial anodes

The microstructural properties and electrochemical performance of zinc(Zn)sacrificial anodes during strain-induced melt activation(SIMA)were investigated in this study.The samples were subjected to a compressive ratio of 20%-50% at various temperatures(425-435℃)and durations(5-30 min).Short-term electrochemical tests(anode tests)based on DNV-RP-B401 and potentiodynamic polarization tests were performed in 3.5wt%NaCl solution to evaluate the electrochemical efficiency and corrosion behavior of the samples,respectively.The electrochemical test results for the optimum sample confirmed that the corrosion current density declined by 90% and the anode efficiency slightly decreased relative to that of the raw sample.Energy-dispersive X-ray spectroscopy,scanning electron microscopy,metallographic images,and microhardness profiles showed the accumulation of alloying elements on the boundary and the conversion of uniform corrosion into localized corrosion,hence the decrease of the Zn sacrificial anode’s efficiency after the SIMA process.

Isothermal and athermal martensitic transformations of ceria cerla doped zilrconian

Martensitic transformation behavior was studied for zirconia containing 4%～10% CeO2 (in mole fraction) by using a dilatometric method. The Ms (Martensite start temperature) decreased near linearly with increasing CeO2. Different transformation modes were observed depending on the composition and cooling rate. ZrO2 containing 6% CeO2 showed isothermal transformation behavior, whereas ZrO2 containing 9% and 10% CeO2 showed athermal transformation behavior. However, ZrO2 containing 8% CeO2 showed either isothermal or athermal transformations behavior depending on the cooling rate. A TTT (Time-Temperature-Transformation) diagram was proposed for ZrO2 containing 8% CeO2.