ADMM-based Distributed Active and Reactive Power Control for Regional AC Power Grid with Wind Farms

A distributed active and reactive power control(DARPC)strategy based on the alternating direction method of multipliers(ADMM)is proposed for regional AC transmission system(TS)with wind farms(WFs).The proposed DARPC strategy optimizes the power distribution among the WFs to minimize the power losses of the AC TS while tracking the active power reference from the transmission system operator(TSO),and minimizes the voltage deviation of the buses inside the WF from the rated voltage as well as the power losses of the WF collection system.The optimal power flow(OPF)of the TS is relaxed by using the semidefinite programming(SDP)relaxation while the branch flow model is used to model the WF collection system.In the DARPC strategy,the large-scale strongly-coupled optimization problem is decomposed by using the ADMM,which is solved in the regional TS controller and WF controllers in parallel without loss of the global optimality.The boundary information is exchanged between the regional TS controller and WF controllers.Compared with the conventional OPF method of the TS with WFs,the optimality and accuracy of the system operation can be improved.Moreover,the proposed strategy efficiently reduces the computation burden of the TS controller and eliminates the need of a central controller.The protection of the information privacy can be enhanced.A modified IEEE 9-bus system with two WFs consisting of 64 wind turbines(WTs)is used to validate the proposed DARPC strategy.

The Detection of Inter-Turn Short Circuits in the Stator Windings of Sensorless Operating Induction Motors

This work proposes an alternative strategy to the use of a speed sensor in the implementation of active and reactive power based model reference adaptive system (PQ-MRAS) estimator in order to calculate the rotor and stator resistances of an induction motor (IM) and the use of these parameters for the detection of inter-turn short circuits (ITSC) faults in the stator of this motor. The rotor and stator resistance estimation part of the IM is performed by the PQ-MRAS method in which the rotor angular velocity is reconstructed from the interconnected high gain observer (IHGO). The ITSC fault detection part is done by the derivation of stator resistance estimated by the PQ-MRAS estimator. In addition to the speed sensorless detection of ITSC faults of the IM, an approach to determine the number of shorted turns based on the difference between the phase current of the healthy and faulty machine is proposed. Simulation results obtained from the MATLAB/Simulink platform have shown that the PQ-MRAS estimator using an interconnected high-gain observer gives very similar results to those using the speed sensor. The estimation errors in the cases of speed variation and load torque are almost identical. Variations in stator and rotor resistances influence the performance of the observer and lead to poor estimation of the rotor resistance. The results of ITSC fault detection using IHGO are very similar to the results in the literature using the same diagnostic approach with a speed sensor.

Stability analysis and decentralized control of inverter-based ac microgrid

This work considers the problem of decentralized control of inverter-based ac micro-grid in different operation modes.The main objectives are to(i)design decentralized frequency and voltage controllers,to gather with power sharing,without information exchange between microsources(ii)design passive dynamic controllers which ensure stability of the entire microgrid system(iii)capture nonlinear,interconnected and large-scale dynamic of the micro-grid system with meshed topology as a port-Hamiltonian formulation(iv)expand the property of shifted-energy function in the context of decentralized control of ac micro-grid(v)analysis of system stability in large signal point of view.More precisely,to deal with nonlinear,interconnected and large-scale structure of micro-grid systems,the port-Hamiltonian formulation is used to capture the dynamic of micro-grid components including microsource,distribution line and load dynamics as well as interconnection controllers.Furthermore,to deal with large signal stability problem of the microgrid system in the grid-connected and islanded conditions,the shifted-Hamiltonian energy function is served as a storage function to ensure incremental passivity and stability of the microgrid system.Moreover,it is shown that the aggregating of the microgrid dynamic and the decentralized controller dynamics satisfies the incremental passivity.Finally,the effectiveness of the proposed controllers is evaluated through simulation studies.The different scenarios including grid-connected and islanded modes as well as transition between both modes are simulated.The simulation conforms that the decentralized control dynamics are suited to achieve the desired objective of frequency synchronization,voltage control and power sharing in the grid-connected and islanded modes.The simulation results demonstrate the effectiveness of the proposed control strategy.

Application of fuzzy logic control algorithm as stator power controller of a grid-connected doubly-fed induction generator

This paper discusses the power outputs control of a grid-connected doubly-fed induction generator （DFIG） for a wind power generation systems. The DFIG structure control has a six diode rectifier and a PWM IGBT converter in order to control the power outputs of the DFIG driven by wind turbine. So, to supply commercially the electrical power to the grid without any problems related to power quality, the active and reactive powers （Ps, Qs） at the stator side of the DFIG are strictly controlled at a required level, which, in this paper, is realized with an optimized fuzzy logic controller based on the grid flux oriented control, which gives an optimal operation of the DFIG in sub-synchronous region, and the control of the stator power flow with the possibility of keeping stator power factor at a unity.

Robust direct power control based on the Lyapunov theory of a grid-connected brushless doubly fed induction generator

This paper deals with robust direct power control of a grid-connected bmshless doubly-fed induction generator（BDFIG）. Using a nonlinear feedback lineariza- tion strategy, an attempt is made to improve the desired performances by controlling the generated stator active and reactive power in a linear and decoupled manner. There- fore, to achieve this objective, the Lyapunov approach is used associated with a sliding mode control to guarantee the global asymptotical stability. Thus, an optimal operation of the BDFIG in sub-synchronous operation is obtained as well as the stator power flows with the possibility of keeping stator power factor at a unity. The proposed method is tested with the Matlab/Simulink software. Simulation results illustrate the performances and the feasibility of the designed control.

Multi-period Two-stage Robust Optimization of Radial Distribution System with Cables Considering Time-of-use Price

In the existing multi-period robust optimization methods for the optimal power flow in radial distribution systems,the capability of distributed generators(DGs)to regulate the reactive power,the operation costs of the regulation equipment,and the current of the shunt capacitor of the cables are not considered.In this paper,a multi-period two-stage robust scheduling strategy that aims to minimize the total cost of the power supply is developed.This strategy considers the time-ofuse price,the capability of the DGs to regulate the active and reactive power,the action costs of the regulation equipment,and the current of the shunt capacitors of the cables in a radial distribution system.Furthermore,the numbers of variables and constraints in the first-stage model remain constant during the iteration to enhance the computation efficiency.To solve the second-stage model,only the model of each period needs to be solved.Then,their objective values are accumulated,revealing that the computation rate using the proposed method is much higher than that of existing methods.The effectiveness of the proposed method is validated by actual 4-bus,IEEE 33-bus,and PG 69-bus distribution systems.

Single-stage Five-level Common Ground Transformerless Inverter with Extendable Structure for Centralized Photovoltaics

The paper presents a five-level common ground type(5L-CGT),transformer-less inverter topology with double voltage boosting.The proposed inverter uses eight switches and two capacitors,charged at input voltage level.The inverter in its basic form acts as a string inverter for low-power PV applications.However,it can be extended to work as a scalable multi-level inverter with higher power handling capability to act as a centralized inverter.The working of the inverter with the sizing of the components is presented with mathematical analysis.The efficiency of the proposed PV inverter is found using thermal losses associated with switches using PLECS software.A prototype of 1 kW has been designed,and experimentation has been carried out.Various loads with a lagging power factor up to 0.6 have been tested with the inverter to establish the usability of the proposed inverter in a worst-case emulated homeuse scenario.The total harmonic distortion(THD)at the output has been recorded using a power quality analyzer with voltage and current THD values of 4.5%and 2.5%,respectively,which lies within the limits of IEEE 519 standards.The highest power conversion efficiency of the inverter has been recorded to be 96.20%.