Two dimensional coupled oscillators array with rhombus structure and its application in active antenna array

Beam scanning and forming can be achieved by coupled oscillators array without phase shifter. Active antenna array based on coupled oscillators array has the virtue of low cost, high integration, and high efficiency. Traditional two dimensional coupled oscillators array has been arranged on rectangular lattices, and phase difference of adjacent elements is limited to [-90°, 90°]. Therefore, the beam scanning range is limited to [-30°, 30°] from normal for half wavelength element spacing. A new two dimensional coupled oscillators array with rhombus structure is presented. Phase control method and phase error of the array are also provided. Stability of the array is analyzed, and stable condition is given. When this coupled oscillators array with rhombus structure is used in active antenna array, theoretical results show that phase difference of adjacent elements reach the limit of [-180°, 180°] along the horizontal and vertical directions. Therefore, it has wider beam scanning range than that of a rectangular lattice structure.

Analysis of electrical performances of planar active phased array antennas with distorted array plane

The influence of the distorted plane of the active phased array antenna on the electromagnetic performance is of great significance to the research on and development of the high-performance antennas. On the bent and bowl-shape distortion, the model is established of the relationship between the electromagnetic performance and the position error of the radiated elements. The method is presented of analyzing the far-field pattern of the distorted rectangular active phased array antenna. The analysis results of a planar phased array antenna with different distortions grades prove the validity of the model. Therefore, by the method, the antenna designers may set the reasonable requirement on the structural tolerance in manufacturing antenna.

Design and Implementation of An Active Multibeam Antenna System with 64 RF Channels and 256 Antenna Elements for Massive MIMO Application in 5G Wireless Communications

This paper focuses on the design and implementation of an active multibeam antenna system for massive MIMO applications in 5G wireless communications.The highly integrated active multibeam antenna system is designed and implemented at 5.8 GHz with 64 RF Channels and 256 antenna elements.The 64-channel highly integrated active multibeam antenna system provides a verification platform for digital beamforming algorithm and massive MIMO channel estimation for next generation wireless communications.

Beam shaping with limited amplitude weight values for satellite active phased array antenna

To gain the tradeoff between lower sidelobe and higher power amplifiers efficiency,a transmitting beam shaping scheme with limited amplitude weight values for satellite active phased array antenna is presented. The scheme is implemented by a dual coding genetic algorithm(GA). Phase and amplitude of array weight vectors for beam shaping are encoded by real coding and finite length binary coding,respectively,which,maintaining accuracy of results,reduces the amplitude dynamic range and improves the efficiency of power amplifiers. The presented algorithm,compared with complex-coded GA,increases the convergence rate due to the search space's decrease. In order to overcome the prematurity and obtain better global optimization or quasi-global optimization,a new dual coding GA based on "species diversity retention" strategy and adaptive crossover and mutation probability are presented.

Novel dual-band antenna for multi-mode GNSS applications

A novel dual-band antenna is proposed for mitigating the multi-path interference in the global navigation satellite system（GNSS） applications. The radiation patches consist of a shortedannular-ring reduced-surface-wave（SAR-RSW） element and an inverted-shorted-annular-ring reduced-surface-wave（ISAR-RSW）element. One key feature of the design is the proximity-coupled probe feeds to increase impedance bandwidth. The other is the defected ground structure band rejection filters to suppress the interaction effect between the SAR-RSW and the ISAR-RSW elements. In addition, trans-directional couplers are used to obtain tight coupling. Measurement results indicate that the antenna has a larger than 10 d B return loss bandwidth and a less than 3 d B axial-ratio（AR） bandwidth in the range of（1.164 – 1.255） GHz and（1.552 – 1.610） GHz. The gain of the passive antenna in the whole operating band is more than 7 d Bi.

Adaptive Antenna-Activation Based Beamforming for Large-Scale MIMO Communication Systems of High Speed Railway

Large-scale array aided beamforming improves the spectral efficiency(SE) as a benefit of high angular resolution.When dual-beam downlink beamforming is applied to the train moving towards cell edge,the inter-beam ambiguity(IBA) increases as the directional difference between beams becomes smaller.An adaptive antenna activation based beamforming scheme was proposed to mitigate IBA.In the district near the base station(BS),all antenna elements(AEs) were activated to generate two beams.As the distance from the train to the BS increased,only the minimum number of AEs satisfying the resolution criterion would be activated.At the cell edge,one beam was switched off due to intolerable IBA.The proposed scheme can achieve SE gain to the non-adaptive scheme and show more robustness against the direction-of-arrival(DOA) estimation error.

A+P一体化5G设备的使用探讨

随着5G时代的到来,各地5G基站的建设如火如荼,同时5G网络建设存在工程投资大、5G天线部署需要关注覆盖性能及部署周期等问题。文章针对在利旧基站建设过程中存在的天面空间受限、5G低挂高、铁塔风荷载受限等问题,对A+P(Combination of active and passive antennas)一体化设备在中国电信和中国联通的5G基站建设中的使用方式提出一些建议,根据A+P设备在不同建设场景来进行工程建设、投资分析,说明A+P一体化设备的较高实用性。

On the Path to High-Temperature Josephson Multi-Junction Devices

We report our progress in the high-temperature superconductor(HTS)Josephson junction fabrication process founded on utilizing a focused helium ion beam damaging technique and discuss the expected device performance attainable with the HTS multi-junction device technology.Both the achievable high value of characteristic voltage V_(C)=I_(C)R_(N)of Josephson junctions and the ability to design a large number of arbitrary located Josephson junctions allow narrowing the existing gap in design abilities for lowtemperature superconductor(LTS)and HTS circuits even with using a single YBa_(2)Cu_(3)O_(7-x) film layer.A one-layer topology of active electrically small antenna is suggested and its voltage response characteristics are considered.