Effect of aggregation on thermally activated delayed fluorescence and ultralong organic phosphorescence:QM/MM study

Aggregation-induced thermally activated delayed fluorescence(TADF)phenomena have attracted extensive attention recently.In this paper,several theoretical models including monomer,dimer,and complex are used for the explanation of the luminescent properties of(R)-5-(9H-carbazol-9-yl)-2-(1,2,3,4-tetrahydronaphthalen-1-yl)isoindoline-1,3-dione((R)-ImNCz),which was recently reported[Chemical Engineering Journal 418129167(2021)].The polarizable continuum model(PCM)and the combined quantum mechanics and molecular mechanics(QM/MM)method are adopted in simulation of the property of the molecule in the gas phase,solvated in acetonitrile and in aggregation states.It is found that large spin–orbit coupling(SOC)constants and a smaller energy gap between the first singlet excited state and the first triplet excited state(△E_(st))in prism-like single crystals(SC_(p)-form)are responsible for the TADF of(R)-lmNCz,while no TADF is found in block-like single crystals(SC_(b)-form)with a larger △E_(st).The multiple ultralong phosphorescence(UOP)peaks in the spectrum are of complex origins,and they are related not only to ImNCz but also to a minor amount of impurities(ImNBd)in the crystal prepared in the laboratory.The dimer has similar phosphorescence emission wavelengths to the(R)-lmNCz-SC_(p) monomers.The complex composed of(R)-lmNCz and(R)-lmNBd contributes to the phosphorescent emission peak at about 600 nm,and the phosphorescent emission peak at about 650 nm is generated by(R)-lmNBd.This indicates that the impurity could also contribute to emission in molecular crystals.The present calculations clarify the relationship between the molecular aggregation and the light-emitting properties of the TADF emitters and will therefore be helpful for the design of potentially more useful TADF emitters.

Enhancement of Frster energy transfer from thermally activated delayed fluorophores layer to ultrathin phosphor layer for high color stability in non-doped hybrid white organic light-emitting devices

Fluorescence/phosphorescence hybrid white organic light-emitting devices（WOLEDs） based on double emitting layers（EMLs） with high color stability are fabricated.The simplified EMLs consist of a non-doped blue thermally activated delayed fluorescence（TADF） layer using 9,9-dimethyl-9,10-dihydroacridine-diphenylsulfone（DMAC-DPS） and an ultrathin non-doped yellow phosphorescence layer employing bis[2-（4-tertbutylphenyl）benzothiazolato-N,C2＇]iridium（acetylacetonate）（（tbt）_2Ir（acac））.Two kinds of materials of 4,7-diphenyl-1,10-phenanthroline（Bphen） and 1,3,5-tris（2-Nphenylbenzimidazolyl） benzene（TPBi） are selected as the electron transporting layer（ETL）,and the thickness of yellow EML is adjusted to optimize device performance.The device based on a 0.3-nm-thick yellow EML and Bphen exhibits high color stability with a slight Commission International de l＇Eclairage（CIE） coordinates variation of（0.017,0.009） at a luminance ranging from 52 cd/m^2 to 6998 cd/m^2.The TPBi-based device yields a high efficiency with a maximum external quantum efficiency（EQE）,current efficiency,and power efficiency of 10%,21.1 cd/A,and 21.3 lm/W,respectively.The ultrathin yellow EML suppresses hole trapping and short-radius Dexter energy transfer,so that Forster energy transfer（FRET）from DMAC-DPS to（tbt）_2Ir（acac） is dominant,which is beneficial to keep the color stable.The employment of TPBi with higher triplet excited state effectively alleviates the triplet exciton quenching by ETL to improve device efficiency.

High Efficiency and Stable Organic Light-Emitting Diodes Based on Thermally Activated Delayed Fluorescence Emitter

High efficiency, stable organic light-emitting diodes （OLEDs） based on 2-pheyl-4＇-carbazole-9-H-Thioxanthen-9- one-10, 10-dioxide （TXO-PhCz） with different doping concentration are constructed. The stability of the encap- sulated devices are investigated in detail. The devices with the 10 wt% doped TXO-PhCz emitter layer （EML） show the best performance with a current efficiency of 52.1 cd/A, a power efficiency of 32.71re^W, and an external quantum efficiency （EQE） of 17.7%. The devices based on the lOwt%-doped TXO-PhCz EML show the best operational stability with a half-life time （LTSO） of 8Oh, which is 8 h longer than that of the reference devices based on fac-tris（2-phenylpyridinato）iridium（ Ⅲ） （Ir（ppy）a）. These indicate excellent stability of TXO-PhCz for redox and oxidation processes under electrical excitation and TXO-PhCz can be potentially used as the emitters for OLEDs with high efficiency and excellent stability. The high-performance device based on TXO-PhCz with high stability can be further improved by the optimization of the encapsulation technology and the development of a new host for TXO-PhCz.

Theoretical verification of intermolecular hydrogen bond induced thermally activated delayed fluorescence in SOBF-OMe

Thermally activated delayed fluorescence(TADF)molecules have attracted great attention as high efficient luminescent materials.Most of TADF molecules possess small energy gap between the first singlet excited state(S_(1))and the first triplet excited state(T_(1))to favor the up-conversion from T_(1)to S_(1).In this paper,a new TADF generation mechanism is revealed based on theoretical simulation.By systematic study of the light-emitting properties of SOBF-OMe in both toluene and in aggregation state,we find that the single SOBF-OMe could not realize TADF emission due to large energy gap as well as small up-conversion rates between S_(1)and T_(1).Through analysis of dimers,we find that dimers with intermolecular hydrogen bond(H-bond)are responsible for the generation of TADF,since smaller energy gap between S_(1)and T_(1)is found and the emission wavelength is in good agreement with experimental counterpart.The emission properties of SOBF-H are also studied for comparison,which reflect the important role of H-bond.Our theoretical results agree ith experimental results well and confirm the mechanism of H-bond induced TADF.

Perspective for aggregation-induced delayed fluorescence mechanism:A QM/MM study

To enhance the potential application of thermally activated delayed fluorescence(TADF)molecular materials,new functions are gradually cooperated to the TADF molecules.Aggregation induced emission can effectively solve the fluorescence quenching problem for TADF molecules in solid phase,thus aggregation-induced delayed fluorescence(AIDF)molecules were recently focused.Nevertheless,their luminescent mechanisms are not clear enough.In this work,excited state properties of an AIDF molecule DMF-BP-DMAC[reported in Chemistry-An Asian Journal 14828(2019)]are theoretically studied in tetrahydrofuran(THF)and solid phase.For consideration of surrounding environment,the polarizable continuum method(PCM)and the combined quantum mechanics and molecular mechanics(QM/MM)method were applied for solvent and solid phase,respectively.Due to the increase of the transition dipole moment and decrease of the energy difference between the first single excited state(S1)and the ground state(S0),the radiative rate is increased by about 2 orders of magnitude in solid phase.The energy dissipation of the non-radiative process from S1 to S0 is mainly contributed by low-frequency vibrational modes in solvent,and they can be effectively suppressed in aggregation,which may lead to a slow non-radiation process in solid phase.Both factors would induce enhanced luminescence efficiency of DMF-BP-DMAC in solid phase.Meanwhile,the small energy gap between S1 and triplet excited states results in high reverse intersystem crossing(RISC)rates in both solvent and solid phase.Therefore,TADF is confirmed in both phases.Aggregation significantly influences both the ISC and RISC processes and more RISC channels are involved in solid state.The enhanced delayed fluorescence should be induced by both the enhanced fluorescent efficiency and ISC efficiency.Our calculation provides a reasonable explanation for experimental measurements and helps one to better understand the luminescence mechanism of AIDF molecules.

Luminescent properties of thermally activated delayed fluorescence molecule with intramolecular π-π interaction between donor and acceptor

Influence of intramolecular π-π interaction on the luminescent properties of thermally activated delayed fluorescence（TADF） molecule（3, 5-bis（3,6-di-tert-butyl-9 H-carbazol-9-yl）-phenyl）（pyridin-4-yl） methanone（DTCBPY） is theoretically studied by using the density functional theory（DFT） and time-dependent density functional theory（TD-DFT）.Four conformations（named as A, B, C, and D） of the DTCBPY can be found by relax scanning, and the configuration C corresponds to the luminescent molecule detected experimentally. Besides, we calculate the proportion of each conformation by Boltzmann distribution, high configuration ratios（44% and 52%） can be found for C and D. Moreover, C and D are found to exist with an intramolecular π-π interaction between one donor and the acceptor; the intramolecular interaction brings a smaller Huang-Rhys factor and reduced reorganization energy. Our work presents a rational explanation for the experimental results and demonstrates the importance of the intramolecular π-π interaction to the photophysical properties of TADF molecules.

Heptagonal intramolecular-lock strategy enables high-performance thermally activated delayed fluorescence emitters

The development of highly efficient thermally activated delayed fluorescence(TADF)emitters is persistently pursued for the application of organic light-emitting diodes(OLED)in full-colour display and solid-state lighting.Herein,we present a heptagonal intramolecular-lock strategy to design high-performance TADF emitters.As a proof-of-concept,a new type of tribenzotropone(TBP)acceptor has been designed and synthesized by a cascade decarboxylative cyclization of aryl oxoacetic acid derivative with biphenyl boronic acid.Compared with the unlocked benzophenone(BP)acceptor,the TBP acceptor has a highly twisted heptagonal geometry with moderate rigidity and flexibility,which enables a high-performance TADF emitter with a small single-triplet energy gap(ΔE_(ST))of 0.04 e V,a high photoluminescence quantum yield(Φ_(PL))of 99% and a large horizontal orientation factor(Θ_(//))of 84.0%.Consequently,highly efficient OLEDs with an external quantum efficiency as high as 33.8% are assembled,which is significantly higher than those of DPAC-BP with a highly rotatable BP acceptor(23.8%)as well as DPACFO with a rigid fluorenone(FO)acceptor(6.9%).

Chiral thermally activated delayed fluorescence materials for circularly polarized organic light-emitting diodes

Chirality is an important natural characteristic of organic molecules,and chiral organic molecules have shown extensive application in areas such as pharmaceutical development and material science.Benefiting from the ability to achieve circularly polarized luminescence(CPL),chiral luminescent materials have shown potential applications in anti-glare display,optical communication and,3D display,etc.Due to the ability to harvest both singlet and triplet excitons by a fast reverse intersystem crossing process without involving noble metals,chiral thermally activated delayed fluorescence(TADF)materials with point chirality,axial chirality,planar chirality and helical chirality are regarded as the state-of-the-art materials for circularly polarized organic light-emitting diodes(CP-OLEDs).In recent years,the chiral TADF materials and CP-OLEDs have rapidly developed,but unfortunately,the dissymmetry factors(g)are far from the requirement of practical applications.The ideal emitters and devices should have both high efficiency and a g factor,or at least a balance between these two elements.This review gives an overview of recent progress in chiral TADF materials,with a particular focus on the chiral skeleton,CPL property and device performance.Furthermore,the molecular design concept,device structure and methods to improve the g factors of chiral materials and CP-OLEDs are also discussed.

Chiral multiple-resonance thermally activated delayed fluorescence materials based on chiral spiro-axis skeleton for efficient circularly polarized electroluminescence

Chiral luminescence materials have potential applications in the field of three-dimensional displays due to their circularly polarized luminescence(CPL)characteristics.However,the further development of circularly polarized organic light-emitting diodes(CP-OLEDs)needs to meet the requirements of high efficiency,high color purity,low cost,and high dissymmetry factor(gPLor gEL),chiral multiple resonance thermally activated delayed fluorescence(MR-TADF)materials are considered as candidates in these aspects.Herein,based on a pair of chiral spirofluorene precursors,two pairs of high-performance chiral MR-TADF emitters((R/S)-p-Spiro-DtBuCzB and(R/S)-m-Spiro-DtBuCzB)are developed,which exhibit strong emissions peaking at 491 and 502 nm in toluene with full-width at half-maximum values of 25 and 33 nm,respectively.In addition,small singlet–triplet energy gaps of 0.15 and 0.10 eV with high absolute photoluminescence efficiencies of 95.0%and 96.7%are observed for p-Spiro-DtBuCzB and m-Spiro-DtBuCzB molecules,respectively.OLEDs based on p-Spiro-DtBuCzB and m-Spiro-DtBuCzB display high maximum external quantum efficiencies of 29.6%and 33.8%,respectively.Most importantly,CP-OLEDs present symmetric circularly polarized electroluminescence spectra with|gEL|factors of 3.36×10^(-4)and 7.66×10^(-4)for devices based on(R/S)-p-Spiro-DtBuCzB and(R/S)-m-Spiro-DtBuCzB enantiomers,respectively.

Thermally activated delayed fluorescence carbazole-triazine dendrimer with bulky substituents

Carbazole-triazine dendrimers with a bulky terminal substituent were synthesized,and the thermally activated delayed fluorescence(TADF)property was investigated.Compared to unsubstituted carbazole dendrimers,dendrimers with bulky terminal substituents showed comparable to better photoluminescence quantum yields(PLQY)in neat films.Phenylfluorene(PF)-substituted dendrimers showed the highest PLQY of 81%,a smallΔEst of 0.06 eV,and the fastest reverse intersystem crossing(RISC)rate of∼1×10^(5 )s^(−1) compared to other dendrimers.Phosphorescence measurements of dendrimers and dendrons(fragments)indicate that the close proximity of the triplet energy of phenylfluorene-substituted carbazole dendrons(^(3)LE)to that of phenylfluorene-substituted dendrimers(^(1)CT,^(3)CT)contributes to RISC promotion and improves TADF efficiency.Terminal modification fine-tunes the energy level and suppresses intermolecular interactions,and this study provides a guideline for designing efficient solution-processable and non-doped TADF materials.

Green and Near-Infrared Dual-Mode Afterglow of Carbon Dots and Their Applications for Confidential Information Readout

Near-infrared(NIR),particularly NIR-containing dual-/multimode afterglow,is very attractive in many fields of application,but it is still a great challenge to achieve such property of materials. Herein,we report a facile method to prepare green and NIR dual-mode afterglow of carbon dots(CDs) through in situ embedding o-CDs(being prepared from o-phenylenediamine) into cyanuric acid(CA) matrix(named o-CDs@CA). Further studies reveal that the green and NIR afterglows of o-CDs@CA originate from thermal activated delayed fluorescence(TADF) and room temperature phosphorescence(RTP) of o-CDs,respectively. In addition,the formation of covalent bonds between o-CDs and CA,and the presence of multiple fixation and rigid e ects to the triplet states of o-CDs are confirmed to be critical for activating the observed dual-mode afterglow. Due to the shorter lifetime and insensitiveness to human vision of the NIR RTP of o-CDs@CA,it is completely covered by the green TADF during directly observing. The NIR RTP signal,however,can be readily captured if an optical filter(cut-o wavelength of 600 nm) being used. By utilizing these unique features,the applications of o-CDs@CA in anti-counterfeiting and information encryption have been demonstrated with great confidentiality. Finally,the as-developed method was confirmed to be applicable to many other kinds of CDs for achieving or enhancing their afterglow performances.

Chiral Thermally Activated Delayed Fluorescence-Active Macrocycles Displaying Efficient Circularly Polarized Electroluminescence

An efficient strategy for constructing chiral macrocycles with both thermally activated delayed fluorescence(TADF)and highly efficient circularly polarized electroluminescence(CPEL)properties was developed.Consequently,a pair of macrocyclic enantiomers(+)-(R,R)-MC and(−)-(S,S)-MC was synthesized by a combination of chiral octahydro-binaphthol moiety with triazine-based TADF skeleton.The chiral macrocycles exhibited obvious TADF properties with a lowΔE_(ST) of 0.067 eV,aggregation-induced emission behaviors,and high photoluminescence quantum yields of up to 79.7%.Moreover,the macrocyclic enantiomers showed mirror images in circular dichroism spectra and circularly polarized luminescence signals.Especially,the chiralmacrocycleswere suitable for the preparation of solution-processed circularly polarized organic light-emitting diodes,which displayed excellent device performances with a highmaximum external quantum efficiency of up to 17.1%,low-efficiency roll-off of 3.5%at 1000 cdm^(−2),andintenseCPELalong with electroluminescence dissymmetry factor of 1.7×10^(−3).

Enhancement of electroluminescent properties of organic optoelectronic integrated device by doping phosphorescent dye

Organic optoelectronic integrated devices（OIDs） with ultraviolet（UV） photodetectivity and different color emitting were constructed by using a thermally activated delayed fluorescence（TADF） material 4, 5-bis（carbazol-9-yl）-1, 2-dicyanobenzene（2 CzPN） as host. The OIDs doping with typical red phosphorescent dye [tris（1-phenylisoquinoline）iridium（Ⅲ）, Ir（piq）3], orange phosphorescent dye {bis[2-（4-tertbutylphenyl）benzothiazolato-N,C-（2＇）]iridium（acetylacetonate）,（tbt）2 Ir（acac）}, and blue phosphorescent dye [bis（2, 4-di-fluorophenylpyridinato）-tetrakis（1-pyrazolyl）borate iridium（Ⅲ）, FIr6] were investigated and compared. The（tbt）2 Ir（acac）-doped orange device showed better performance than those of red and blue devices, which was ascribed to more effective energy transfer. Meanwhile, at a low dopant concentration of 3 wt.%, the（tbt）2 Ir（acac）-doped OIDs showed the maximum luminance, current efficiency, power efficiency of 70786 cd/m^2, 39.55 cd/A, and 23.92 lm/W, respectively, and a decent detectivity of 1.07 × 10^11 Jones at a bias of -2 V under the UV-350 nm illumination. This work may arouse widespread interest in constructing high efficiency and luminance OIDs based on doping phosphorescent dye.

Sky-Blue Aggregation-Induced Delayed Fluorescence Luminogens with High Horizontal Dipole Orientation for Efficient Organic Light-Emitting Diodes

Efficient and stable blue luminescent organic materials are highly demanded in the field of organic light-emitting diodes(OLEDs)but still remain challenging.In this work,two new sky-blue luminescent molecules comprised of electron acceptor of benzophenone and electron donors of spiro[acridine-9,9'-fluorene]and carbazole are designed and synthesized,and their thermal stability,electrochemical behaviors,photophysical properties,carrier transport ability and electroluminescence performance are investigated.

Phosphonium-Based Ionic Thermally Activated Delayed Fluorescence Emitters for High-Performance Partially Solution-Processed Organic Light-Emitting Diodes

Ionic thermally activated delayed fluorescence(TADF)emitters are rarely investigated due to their poor photoluminescence and electroluminescence performance.Herein,highly efficient ionic TADF emitters with charged donor–acceptor(D–A^(+))and D–A^(+)–D architectures are designed,innovatively based on the phosphonium cation electron acceptor.The symmetric D–A^(+)–D compound in doped film exhibits a high photoluminescence quantum yield of 0.91 and a short emission lifetime of 1.43 microseconds.Partially solution-processed organic lightemitting diodes based on these ionic TADF emitters achieve a maximum external quantum efficiency(EQE)of 18.3%and a peak luminance of 14,532 candelas per square meter(cd/m^(2))and show a small efficiency roll-off of 7.1%(EQE=17%)at a practical high luminance of 1000 cd/m^(2).These results demonstrate the high potential of phosphonium cations as promising electron acceptors to construct TADF emitters for high-performance electroluminescence devices.The current study opens up an appealing way for future exploitation of high-efficiency ionic TADF materials.

Thermally activated delayed fluorescence materials for nondoped organic light-emitting diodes with nearly 100%exciton harvest

High-performance nondoped organic light-emitting diodes(OLEDs)are promising technologies for future commercial applications.Herein,we synthesized two new thermally activated delayed fluorescence(TADF)emitters that enable us,for the first time,to combine three effective approaches for enhancing the efficiency of nondoped OLEDs.First,the two emitters are designed to have high steric hindrances such that their emitting cores will be suitably isolated from those of their neighbors to minimize concentration quenching.On the other hand,each of the two emitters has two stable conformations in solid films.In their neat films,molecules with the minority conformation behave effectively as dopants in the matrix composing of the majority conformation.One hundred percent exciton harvesting is thus theoretically feasible in this unique architecture of“self-doped”neat films.Furthermore,both emitters have relatively high aspect ratios in terms of their molecular shapes.This leads to films with preferred molecular orientations enabling high populations of horizontal dipoles beneficial for optical outcoupling.With these three factors,OLEDs with nondoped emitting layers of the respective emitters both achieve nearly 100%exciton utilization and deliver over 30%external quantum efficiencies and ultralow efficiency roll-off at high brightness,which have not been observed in reported nondoped OLEDs.

Fine Tuning of Donor-Acceptor Structures in Fused-Carbazole Containing Thermally Activated Delayed Fluorescence Materials towards High-Efficiency OLEDs

Comprehensive Summary Conjugated fused-ring structures have attracted extensive attention due to their high molecular rigidity to restrain excited-state relaxation and non-radiative decay,and further to enhance the luminance efficiency for emissive materials.Herein,we develop a series of donor-acceptor type thermally activated delayed fluorescence(TADF)emitters by introducing fused-ring 5H-benzofuro[3,2-c]carbazole(32BFCz)as electron donating unit.Through optimizing the numbers and structure of donor and acceptor moieties,three compounds named 32BFCzA,mCF3BFCzOXD and dCF3BFCzOXD are designed,which are composed by mono-32BFCz/trifluoromethylpicolinonitrile,penta-BFCz/3-(trifluoromethyl)phenyl)-1,3,4-oxadiazol-2-yl)benzene and penta-32BFCz/3,5-bis(trifluoromethyl)phenyl)-1,3,4-oxadiazol-2-yl)benzene as donor/acceptor groups,respectively.

Acceptor modulation for improving thermally activated delayed fluorescence emitter in through-space charge transfer on spiroskeletons

Through-space charge transfer(TSCT)is regarded as an effective way to develop thermally activated delayed fluorescence(TADF)emitters.Based on this strategy,many molecular frameworks have been proposed,among which spirobased scaffolds have been extensively studied due to their unique advantages.In this work,we developed three emitters SPS,SPO,and SPON,which were constructed with the same donor and various acceptors to explore the influence of acceptor modulation at the C9 position of fluorene for spirostructure TSCT emitters.The results show that the acceptor with too weak electronwithdrawing ability will cause the emitter to not have TADF properties,while the acceptor with too much steric hindrance will weaken the face-to-faceπ-πstacking interaction between donor/acceptor(D/A).Since SPO balances the electron-withdrawing strength and steric hindrance of the acceptor,it achieves the highest external quantum efficiency(EQE)of 17.75%.This work shows that appropriate acceptor selection is essential for the TADF properties and high efficiency of the spirobased scaffold TSCT emitter.

Synthesis and properties of binaphthyl chiral thermally activated delayed fluorescence molecules using thioxanthone as acceptor

The currently reported axial chiral molecules based on the 3,3'-substitution of the binaphthyl skeleton are limited by intrinsic fluorescence properties,resulting in generally low device efficiencies(EQE<5%)of related organic light emitting diodes(OLEDs).Herein,we designed and synthesized four pair of chiral binaphthyl enantiomers(R/S-1-R/S-4)adopting acceptor-donor-donor-acceptor(ADDA)structure by introducing different thioxanthone modification groups on the 3,3'-position of 2,2'-dimethoxy-1,1'-binaphthalene.Among them,emitter R/S-2 and R/S-4 obtained by enhancing intramolecular charge transfer exhibited TADF characteristics due to relatively small Est of 0.12eV and 0.17eV,and relatively moderate SOC matrix elements of 0.28 cm^(-1)and 0.10 cm^(-1)between the 1CT and 3LE states.The CD spectra of these enantiomers in diluted solutions showed perfect mirror images and reasonable gabs for small organic molecules(10^(-4)-10^(-3)).And the external quantum eficiencies(EQE)of 10.9%and 8.32%for device A and B based on emitter S-2 and S-4 were highest compared with currently reported axial chiral molecules based on the 3,3'-position substitution of binaphthyl skeleton,providing simple molecular design strategies to construct efficient CP-OLED device.

Thermally activated delayed fuorescent small molecule sensitized fuorescent polymers with reduced concentration‑quenching for efcient electroluminescence

Thermally activated delayed fuorescence(TADF)small molecule bis-[3-(9,9-dimethyl-9,10-dihydroacridine)-phenyl]-sulfone(m-ACSO2)was used as a universal host to sensitize three conventional fuorescent polymers for maximizing the electroluminescent performance.The excitons were utilized via inter-molecular energy transfer and the non-radiative decays were successfully refrained in the condensed states.Therefore,the signifcant enhancement of the electroluminescent efciencies was demonstrated.For instance,after doping poly(9,9-dioctylfuorene-co-benzothiadiazole)(F8BT)into m-ACSO2,the external quantum efciency(EQE)was improved by a factor of 17.0 in the solution-processed organic light-emitting device(OLED),as compared with the device with neat F8BT.In terms of the other well-known fuorescent polymers,i.e.,poly(para-phenylene vinylene)copolymer(Super Yellow,SY)and poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene](MEH-PPV),their EQEs in the devices were respectively enhanced by 70%and 270%,compared with the reference devices based on the conventional host 1,3-di(9H-carbazol-9-yl)benzene(mCP).Besides the improved charge balance in the bipolar TADF host,these were partially ascribed to reduced fuorescence quenching in the mixed flms.