Disturbances rejection optimization based on improved two-degree-of-freedom LADRC for permanent magnet synchronous motor systems

Permanent magnet synchronous motor(PMSM)speed control systems with conventional linear active disturbance rejection control(CLADRC)strategy encounter issues regarding the coupling between dynamic response and disturbance suppression and have poor performance in suppressing complex nonlinear disturbances.In order to address these issues,this paper proposes an improved two-degree-of-freedom LADRC(TDOF-LADRC)strategy,which can enhance the disturbance rejection performance of the system while decoupling entirely the system's dynamic and anti-disturbance performance to boost the system robustness and simplify controller parameter tuning.PMSM models that consider total disturbances are developed to design the TDOF-LADRC speed controller accurately.Moreover,to evaluate the control performance of the TDOF-LADRC strategy,its stability is proven,and the influence of each controller parameter on the system control performance is analyzed.Based on it,a comparison is made between the disturbance observation ability and anti-disturbance performance of TDOF-LADRC and CLADRC to prove the superiority of TDOF-LADRC in rejecting disturbances.Finally,experiments are performed on a 750 W PMSM experimental platform,and the results demonstrate that the proposed TDOF-LADRC exhibits the properties of two degrees of freedom and improves the disturbance rejection performance of the PMSM system.

Active disturbance rejection control on first-order plant

Conventional PI control encounters some problems when dealing with large lag process in the presence of parameter uncertainties.For the typical first-order process,an observerbased linear active disturbance rejection control（LADRC） scheme is presented to cope with the difficulties,and a reduced-order observer scheme is proposed further.Some quantitative dynamic results with regard to non-overshoot characteristics are obtained.Finally,the performance boundaries of LADRC and PI control are explicitly compared with each other,which shows that the former is more superior in most cases.

Active Disturbance Rejection Control for a Multiple-Flexible-Link Manipulator

The control problem of multiple-flexible-link manipulators( MFLMs) is studied in this paper.The dynamic model of MFLM is derived and separated into two-time scale by utilizing the singular perturbation technique. The active disturbance rejection control( ADRC) is adopted to the slow subsystem to track a desired trajectory. The proposed ADRC structure preshapes the desired trajectory by utilizing the tracking differentiator,estimates the disturbance and internal states with an extended state observer,and guarantees a robust performance by combining a feedback controller with a feedforward term. Two types of feedback controllers are designed,proportional derivative( PD) controller and nonlinear PD( NPD) controller. For the fast subsystem,a fast stabilizing control is designed according to the standard linear quadratic regulator approach. Simulations are performed to evaluate the proposed control scheme.Results show that,compared with the traditional PD controller,the ADRC structure based control scheme has smaller overshot and shorter settling time,suppresses vibration quickly,and is robust to the maneuver speed. In general,the control scheme utilizing ADRC structure and NPD feedback controller shows better performance.

Fractional Order Linear Active Disturbance Rejection Control for Linear Flexible Joint System

A linear flexible joint system using fractional order linear active disturbance rejection control is studied in this paper.With this control scheme,the performance against disturbances,uncertainties,and attenuation is enhanced.Linear active disturbance rejection control(LADRC)is mainly based on an extended state observer(ESO)technology.A fractional integral(FOI)action is combined with the LADRC technique which proposes a hybrid control scheme like FO-LADRC.Incorporating this FOI action improves the robustness of the standard LADRC.The set-point tracking of the proposed FO-LADRC scheme is designed by Bode’s ideal transfer function(BITF)based robust closed-loop concept,an appropriate pole placement method.The effectiveness of the proposed FO-LADRC scheme is illustrated through experimental results on the linear flexible joint system(LFJS).The results show the enhancement of the robustness with disturbance rejection.Furthermore,a comparative analysis is presented with the results obtained using the integer-order LADRC and FO-LADRC scheme.

Active disturbance rejection control for precise position tracking of piezoelectric actuators

Positioning with high precision piezoelectric actuators is widely used.To overcome positioning inaccuracy caused by hysteresis and creep of actuators,a precise tracking method for piezoelectric actuators using active disturbance rejection control(ADRC) has been proposed in this paper.This method,in real-time,actively estimates and compensates parameter uncertainties,nonlinear factors such as hysteresis,and external disturbances in the tracking system.Precise tracking of the piezoelectric actuator can be achieved without any form of feedforward compensations.The experimental results demonstrate that the active disturbance rejection controller can reduce tracking errors by over90%comparing with those using the PID controller.Those features of the proposed control method are very suitable for applications in adaptive optics.

Active Disturbance Rejection Control for Uncertain Nonlinear Systems With Sporadic Measurements

This paper deals with the problem of active disturbance rejection control(ADRC)design for a class of uncertain nonlinear systems with sporadic measurements.A novel extended state observer(ESO)is designed in a cascade form consisting of a continuous time estimator,a continuous observation error predictor,and a reset compensator.The proposed ESO estimates not only the system state but also the total uncertainty,which may include the effects of the external perturbation,the parametric uncertainty,and the unknown nonlinear dynamics.Such a reset compensator,whose state is reset to zero whenever a new measurement arrives,is used to calibrate the predictor.Due to the cascade structure,the resulting error dynamics system is presented in a non-hybrid form,and accordingly,analyzed in a general sampled-data system framework.Based on the output of the ESO,a continuous ADRC law is then developed.The convergence of the resulting closed-loop system is proved under given conditions.Two numerical simulations demonstrate the effectiveness of the proposed control method.

Multi-Objective Optimization for Active Disturbance Rejection Control for the ALSTOM Benchmark Problem

Based on a thing that it is difficult to choose the parameters of active disturbance rejection control for the non-linear ALSTOM gasifier, multi-objective optimization algorithm is applied in the choose of parameters. Simulation results show that performance tests in load change and coal quality change achieve better dynamic responses and larger scales of rejecting coal quality disturbances. The study provides an alternative to choose parameters for other control schemes of the ALSTOM gasifier.

Compensated acceleration feedback based active disturbance rejection control for launch vehicles

In this paper, the attitude tracking and load relief control problems against wind disturbances and uncertain aerodynamics as well as the engine thrust of launch vehicles are studied.Firstly, a framework of Compensated Acceleration Feedback based Active Disturbance Rejection Control(CAF-ADRC) is established to achieve both desired attitude tracking and load relief performances. In particular, the total disturbance that includes the effects caused by both aerocoefficient perturbations and disturbances is estimated by constructing an Extended State Observer(ESO) to achieve attitude tracking. Furthermore, combined with the normal acceleration due to the engine thrust, the accelerometer measurement is also compensated to enhance the load relief effect.Secondly, the quantitative analysis of ESO and the entire closed-loop system are studied. It can be concluded that the desired attitude tracking and load relief performances can be achieved simultaneously under the proposed approach. Besides, tuning laws of the proposed approach are systematically given, which are divided into ESO, Proportional Derivative(PD) and Compensated Acceleration Feedback(CAF) modules. Moreover, the performances under CAF-ADRC approach can be better than those under CAF based PD(CAF-PD) approach by tuning load relief gain.Finally, the approach presented is applied to a typical control problem of launch vehicles with wind disturbances and parameter uncertainties.

面向天线跟踪系统的ADRC控制器设计及参数优化

针对传统自抗扰控制器存在参数整定困难及控制器效果有待改善的问题,提出了一种基于改进型Fal函数的永磁同步电机位置自抗扰控制器控制策略,旨在优化伺服系统的控制效果。设计了Le_fal函数以解决Fal函数在定义域区间的不连续性问题和拐点处输出增益的抖动问题,减少了控制器待整定参数。针对自抗扰控制器参数难以整定的问题,采用粒子群算法对控制器参数进行优化。仿真实验结果表明,基于粒子群的改进型自抗扰控制器参数优化算法将超调量从传统自抗扰控制器的3.1016%降低至0.3375%,将调节时间从3.08 s降低到0.47 s,将稳态误差从0.0633降低至0.0162。结果表明,改进后的自抗扰控制器具有更好的快速性和鲁棒性。

ADRC-GPC算法在旋转倒立摆系统中的应用

自抗扰广义预测控制(ADRC-GPC)是一种由广义预测控制技术和自抗扰控制技术有机结合的新型控制算法。该算法首先利用扩张状态观测器(ESO)估计出系统的总扰动;其次,引入虚拟控制量以抵消该总扰动作用,使原被控对象系统转化为积分器串联型系统;最后,利用GPC对新系统进行收敛控制。ADRC-GPC不仅可以有效避免传统GPC的在线计算量过大问题,还无须使用状态量的高阶信息,相比传统ADRC大大降低了调参难度。针对一级旋转倒立摆稳定控制问题中的强耦合、非线性等难点,设计了双通道ADRC-GPC融合控制器。仿真实验结果表明:ADRC-GPC控制器能够使一级旋转倒立摆系统达到控制目的,其对多变量非线性不稳定系统具有良好的控制性能。

High AOA decoupling control for aircraft based on ADRC

In this paper, a practical decoupling control scheme for fighter aircraft is proposed to achieve high angle of attack(AOA)tracking and super maneuver action by utilizing the thrust vector technology. Firstly, a six degree-of-freedom(DOF) nonlinear model with 12 variables is given. Due to low sufficiency of the aerodynamic actuators at high AOA, a thrust vector model with rotatable engine nozzles is derived. Secondly, the active disturbance rejection control(ADRC) is used to realize a three-channel decoupling control such that a strong coupling between different channels can be treated as total disturbance, which is estimated by the designed extended state observer. The control surface allocation is implemented by the traditional daisy chain method. Finally,the effectiveness of the presented control strategy is demonstrated by some numerical simulation results.

基于ADRC的LCC-S谐振型无线充电副边闭环控制研究

针对磁耦合谐振式LCC-S无线充电系统工作过程中易受外界或自身参数扰动的影响导致输出电流、电压偏离目标值的问题,以及如何快速准确地对扰动情况做出反应,提出一种基于自抗扰控制ADRC(active disturbance rejection control)的副边恒流恒压二段式闭环控制方法。首先,通过电路分析研究了LCC-S型谐振网络的输出特性与系统参数的关系;其次,为实现闭环精准调控系统输出,建立副边Buck变换器的状态方程模型,并根据模型设计ADRC中跟踪微分器、扩张状态观测器和非线性状态误差反馈;最后,搭建基于ADRC的无线充电实验平台,在多参数扰动下比较ADRC控制器与PI控制器的控制效果,结果表明,ADRC控制器表现出更好的动态调节能力。

ADRC based control for a class of input time delay systems

This paper is concerned with the control design and the theoretical analysis for a class of input time-delay systems with stable, critical stable or unstable poles. In order to overcome the time delay, a novel feed-forward compensation active disturbance rejection control(FFC-ADRC) approach is proposed. It combines advantages of the Smith predictor and the traditional active disturbance rejection control(ADRC). The tracking differentiator(TD) is designed to predict the control signal, which adds an anticipatory control to the control signal and allows a higher observer bandwidth to obtain better disturbance rejection. The modified extended state observer(ESO) is designed to estimate both system states and the total disturbances(internal disturbance, uncertainties and delayed disturbance). Then the Lyapunov theory and the theory of the input-output stability are applied to prove the asymptotic stability of the closed-loop control system. Finally, numerical simulations show the effectiveness and practicality of the proposed design.

基于ADRC的四臂桥驱动伺服系统死区效应补偿

为了降低死区效应对伺服电机驱动系统的影响,对驱动电路进行设计、分析的基础上,引入自抗扰控制并串联内模状态观测器加以优化,对产生的死区进行补偿。首先,提出了一种四臂桥变换器驱动电路拓扑结构,分析了臂桥产生的死区电压规律。提出齿隙死区模型,分析齿隙死区对系统的影响;其次,将扩张状态观测器与内含内模原理的观测器串联,设计出可降阶的新型死区补偿控制器;最后,将改进的自抗扰控制策略应用于四臂桥驱动伺服电机齿隙死区模型,改善系统性能。结果表明,引入改进自抗扰控制器后,死区效应对伺服系统的影响降低了约40%,系统抗干扰能力增强,补偿效果稳定。

Path tracking for vehicle parallel parking based on ADRC controller

A novel path tracking controller for parallel parking based on active disturbance rejection control （ADRC） was presented in this paper. A second order ADRC controller was used to solve the path tracking robustness, which can estimate and compensate model uncertainty caused by steering kinematics and disturbances caused by parking speed and steering system delay. Collision-free path planning technology was adopted to generate the reference path. The simulation results validate that the performance of the proposed path tracking controller is better than the conventional PID controller. The actual vehicle tests show that the proposed path tracking controller is effective and robust to model uncertainty and disturbances.

Control of Linear Servo Carts with Integral-Based Disturbance Rejection

This paper describes a system designed for linear servo cart systems that employs an integral-based Linear Active Disturbance Rejection Control(ILADRC)scheme to detect and respond to disturbances.The upgrade in this control technique provides extensive immunity to uncertainties,attenuation,internal disturbances,and external sources of noise.The fundamental technology base of LADRC is Extended State Observer(ESO).LADRC,when combined with Integral action,becomes a hybrid control technique,namely ILADRC.Setpoint tracking is based on Bode’s Ideal Transfer Function(BITF)in this proposed ILADRC technique.This proves to be a very robust and appropriate pole placement scheme.The proposed LSC system has experimented with the hybrid ILADRC technique plotted the results.From the results,it is evident that the proposed ILADRC scheme enhances the robustness of the LSC system with remarkable disturbance rejection.Furthermore,the results of a linear quadratic regulator(LQR)and ILADRC schemes are comparatively analyzed.This analysis deduced the improved performance of ILADRC over the LQR control scheme.

Low-voltage ride-through capability improvement of Type-3 wind turbine through active disturbance rejection feedback control-based dynamic voltage restorer

Disconnections due to voltage drops in the grid cannot be permitted if wind turbines(WTs)contribute significantly to electricity pro-duction,as this increases the risk of production loss and destabilizes the grid.To mitigate the negative effects of these occurrences,WTs must be able to ride through the low-voltage conditions and inject reactive current to provide dynamic voltage support.This paper investigates the low-voltage ride-through(LVRT)capability enhancement of a Type-3 WT utilizing a dynamic voltage restorer(DVR).During the grid voltage drop,the DVR quickly injects a compensating voltage to keep the stator voltage constant.This paper proposes an active disturbance rejection control(ADRC)scheme to control the rotor-side,grid-side and DVR-side converters in a wind–DVR integrated network.The performance of the Type-3 WT with DVR topology is evaluated under various test conditions using MATLAB®/Simulink®.These simulation results are also compared with the experimental results for the LVRT capability performed on a WT emulator equipped with a crowbar and direct current(DC)chopper.The simulation results demonstrate a favourable transient and steady-state response of the Type-3 wind turbine quantities defined by the LVRT codes,as well as improved reactive power support under balanced fault conditions.Under the most severe voltage drop of 95%,the stator currents,rotor currents and DC bus voltage are 1.25 pu,1.40 pu and 1.09 UDC,respectively,conforming to the values of the LVRT codes.DVR controlled by the ADRC technique significantly increases the LVRT capabilities of a Type-3 doubly-fed induction generator-based WT under symmetrical voltage dip events.Although setting up ADRC controllers might be challenging,the proposed method has been shown to be extremely effective in reducing all kinds of internal and external disturbances.

基于自抗扰控制的H桥逆变器的混沌研究

为了解决新能源发电系统逆变器出现混沌的问题,提出了一种基于自抗扰控制的H桥逆变器的调节方案。针对处于混沌状态的逆变器的稳态和动态特性差的现象,构建了逆变器的离散模型,并通过建立跟踪微分器、扩张状态观测器以及状态误差反馈控制律进行混沌控制。通过分岔图、折叠图以及仿真分析,结果可知基于自抗扰控制的H桥逆变器比基于比例控制的H桥逆变器的稳定范围扩大了45%,有效地抑制了混沌现象的发生。通过分析可得出:该控制策略对系统的混沌行为能够进行抑制,拓宽了系统稳定工作范围。

基于可编程控制器的槟榔包装控制系统设计

为解决槟榔自动包装机封口装置存在封口不牢固、包材烧穿等问题,设计了一种基于可编程控制器(programmable logic controller, PLC)技术的槟榔自动包装机封口装置控制系统,以实现槟榔包装的稳定性。介绍封口装置工艺以及控制系统结构,包括PLC、温度传感器、位置传感器、温度控制模块、伺服电机等。封口装置中温度为主要研究对象,同时为弥补传统PID(proportional-integral-differential)控制的不足,改善传统LADRC(linear active disturbance rejection control)控制参数整定困难等问题,提出一种粒子群(particle swarm optimization, PSO)优化改进型线性自抗扰温度控制器,以提高封口装置温度控制的鲁棒性和抗扰性。最后进行仿真和实验研究。结果表明:与传统PID以及自抗扰(active disturbance rejection control, ADRC)控制器相比,加入粒子群(particle swarm optimization, PSO)算法优化后的改进型LADRC方法,可以使系统输出响应、快速性增强,调节时间变短,封口装置实际包装温度误差<0.4℃。可见所述封口装置系统有效提高温度控制精度,一定程度上提升了槟榔自动包装机的生产效率。

四旋翼无人飞行器ADRC-GPC控制

针对四旋翼无人飞行器的姿态控制系统,需要研究先进控制策略来达到满意的性能.将自抗扰控制(ADRC)与广义预测控制(GPC)相结合,设计一种新型自抗扰广义预测控制器(ADRC-GPC),利用ADRC中的扩张状态观测器(ESO)来估计和补偿非线性系统的模型不确定性以及外部扰动作用,将原始对象模型转化为积分器形式,然后针对积分器设计广义预测控制器.阶跃响应系数矩阵能被解析地求解出来,可有效地解决广义预测控制计算量大的问题.研究结果表明:所提出的ADRC-GPC控制方法能够对四旋翼无人飞行器姿态系统进行实时控制,可满足控制精度及快速性要求,并能有效地克服系统的外部干扰和多变量耦合作用.自抗扰广义预测控制器能够有效地控制欠驱动非线性多变量系统.