The flow structures in a separated shear layer actuated by a synthetic jet actuator were studied using experimental methods. When forced at a frequency much lower than the natural shedding frequency （fH/U = 0.042 orf...The flow structures in a separated shear layer actuated by a synthetic jet actuator were studied using experimental methods. When forced at a frequency much lower than the natural shedding frequency （fH/U = 0.042 orfXr/U = 0.24）, the vertical flapping motion of the shear layer downstream of the separation point became prominent. The size of the peak in the pressure spectra at the forcing frequency （Sta = fAH//U） measured near the separation point （x/H = 1） increased linearly with the forcing ampli- tude （u＇/U） suggesting a linear response of the pressure fluctuations to the forcing by the synthetic jet. The linear response did not hold for the pressure fluctuations away from the jet exit as the magnitude of the peak for StA measured at x/H = 3 soon saturated when the forcing amplitude became larger than 0.3.展开更多
In order to improve the oxidation resistance of Ti Al alloy, silicide coatings were prepared by pack cementation method at 1273, 1323, and 1373 K for 1-3 hours. Scanning electron microscopy（SEM）, energy dispersive s...In order to improve the oxidation resistance of Ti Al alloy, silicide coatings were prepared by pack cementation method at 1273, 1323, and 1373 K for 1-3 hours. Scanning electron microscopy（SEM）, energy dispersive spectrometry（EDS） and X-ray diffraction（XRD） were employed to investigate the microstructures and phase constitutions of the coatings. The experimental results show that all silicon deposition coatings have multi-layer structure. The microstructure and composition of silicide coatings strongly depend on siliconizing temperatures. In order to investigate the rate controlling step of pack siliconizing on Ti Al alloy, coating growth kinetics was analyzed by measuring the mass gains per unit area of silicided samples as a function of time and temperature. The results showed that the rate controlling step was gas-phase diffusion step and the growth rate constant（k） ranged from 1.53 mg^2/（cm^4·h^2） to 2.3 mg^2/（cm^4·h^2）. Activation energy（Q） for the process was calculated as 109 k J/mol, determined by Arrhenius＇ equation： k = k0 exp[–Q/（RT）].展开更多
基金supported by 973 Plan (2014CB744100)Dalian University of Technology (DUT14LK07)
文摘The flow structures in a separated shear layer actuated by a synthetic jet actuator were studied using experimental methods. When forced at a frequency much lower than the natural shedding frequency （fH/U = 0.042 orfXr/U = 0.24）, the vertical flapping motion of the shear layer downstream of the separation point became prominent. The size of the peak in the pressure spectra at the forcing frequency （Sta = fAH//U） measured near the separation point （x/H = 1） increased linearly with the forcing ampli- tude （u＇/U） suggesting a linear response of the pressure fluctuations to the forcing by the synthetic jet. The linear response did not hold for the pressure fluctuations away from the jet exit as the magnitude of the peak for StA measured at x/H = 3 soon saturated when the forcing amplitude became larger than 0.3.
基金Funded by the Natural Science Program for Basic Research in Key Areas of Shaanxi Province(2014JZ012)
文摘In order to improve the oxidation resistance of Ti Al alloy, silicide coatings were prepared by pack cementation method at 1273, 1323, and 1373 K for 1-3 hours. Scanning electron microscopy（SEM）, energy dispersive spectrometry（EDS） and X-ray diffraction（XRD） were employed to investigate the microstructures and phase constitutions of the coatings. The experimental results show that all silicon deposition coatings have multi-layer structure. The microstructure and composition of silicide coatings strongly depend on siliconizing temperatures. In order to investigate the rate controlling step of pack siliconizing on Ti Al alloy, coating growth kinetics was analyzed by measuring the mass gains per unit area of silicided samples as a function of time and temperature. The results showed that the rate controlling step was gas-phase diffusion step and the growth rate constant（k） ranged from 1.53 mg^2/（cm^4·h^2） to 2.3 mg^2/（cm^4·h^2）. Activation energy（Q） for the process was calculated as 109 k J/mol, determined by Arrhenius＇ equation： k = k0 exp[–Q/（RT）].
