Capability-Aware Data Placement for Heterogeneous Active Storage Systems

By moving computations from computing nodes to storage nodes, active storage technology provides an efficient for data-intensive high-performance computing applications. The existing studies have neglected the heterogeneity of storage nodes on the performance of active storage systems. We introduce CADP, a capability-aware data placement scheme for heterogeneous active storage systems to obtain high-performance data processing. The basic idea of CADP is to place data on storage nodes based on their computing capability and storage capability, so that the load-imbalance among heterogeneous servers can be avoided. We have implemented CADP under a parallel I/O system. The experimental results show that the proposed capability-aware data placement scheme can improve the active storage system performance significantly.

Linkages between soil microbial stability and carbon storage in the active layer under permafrost degradation

The Qinghai-Tibet Plateau(QTP)distributes the largest extent of high-altitude mountain permafrost in the world(Zou et al.,2017),which has different characteristics from high-latitude permafrost(Yang et al.,2010)and stores massive soil carbon.

An Investigation on Hydrogen Storage Kinetics of the Nanocrystalline and Amorphous LaMg12-type Alloys Synthesized by Mechanical Milling

Nanocrystalline and amorphous LaMg_（12）-type LaMg_（11）Ni ＋ x wt% Ni（x = 100, 200） alloys were synthesized by mechanical milling. Effects of Ni content and milling time on the gaseous and electrochemical hydrogen storage kinetics of as-milled alloys were investigated systematically. The electrochemical hydrogen storage properties of the as-milled alloys were tested by an automatic galvanostatic system. And the gaseous hydrogen storage properties were investigated by Sievert apparatus and a differential scanning calorimeter（DSC） connected with a H_2 detector. Hydrogen desorption activation energy of alloy hydrides was estimated by using Arrhenius and Kissinger methods. It is found that the increase of Ni content significantly improves the gaseous and electrochemical hydrogen storage kinetic performances of as-milled alloys. Furthermore, as ball milling time changes, the maximum of both high rate discharge ability（HRD） and the gaseous hydriding rate of as-milled alloys can be obtained. But the hydrogen desorption kinetics of alloys always increases with the extending of milling time. Moreover, the improved gaseous hydrogen storage kinetics of alloys are ascribed to a decrease in the hydrogen desorption activation energy caused by increasing Ni content and milling time.

Aligned carbon nanostructures based 3D electrodes for energy storage

Electrochemical energy storage systems with high specific energy and power as well as long cyclic stability attract increasing attention in new energy technologies. The principles for rational design of electrodes are discussed to reduce the activation, concentration, and resistance overpotentials and improve the active ma- terial efficiency in order to simultaneously achieve high specific energy and power. Three dimensional （3D） nanocomposites are currently considered as promising electrode materials due to their large surface area, reduced electronic and ionic diffusion distances, and synergistic effects. This paper reviews the most recent progress on the synthesis and application of 3D thin film nanoelectrode arrays based on aligned carbon nan- otubes （ACNTs） directly grown on metal foils for energy storages and special attentions are paid on our own representative works. These novel 3D nanoelectrode arrays on metal foil exhibit improved electrochemical performances in terms of specific energy, specific power and cyclic stability due to their unique structures. In this active materials coated ACNTs over conductive substrate structures, each component is tailored to address a different demand. The electrochemical active material is used to store energy, while the ACNTs are employed to provide a large surface area to support the active material and nanocable arrays to facilitate the electron transport. The thin film of active materials can not only reduce ion transport resistance by shorten- ing the diffusion length but also make the film elastic enough to tolerate significant volume changes during charge and discharge cycles. The conductive substrate is used as the current collector and the direct contact of the ACNT arrays with the substrate reduces significantly the contact resistance. The principles obtained from ACNT based electrodes are extended to aligned graphene based electrodes. Similar improvements have been achieved which confirms the reliability of the principles obtained. In addition, we also discuss and view the ongoing trends in development of aligned carbon nanostructures based electrodes for energy storage.

Flexible Strip Supercapacitors for Future Energy Storage

Flexible strip supercapacitors are developed and their electrochemical properties are characterized. Activated carbon is used as the electrode material and it is found to have a good porous structure which provides a large surface area for energy storage.Furthermore, this activated carbon performs well. The manufacturing processes for the supercapacitors are described in detail and the preparation process has good reproducibility. The strip supercapacitors are combined in series and parallel to measure their electrical properties. The performances of these two samples in series or in parallel both follow the theoretical models. The electrochemical potential window of a series circuit of these two strip supercapacitors is 4.8 V. The energy and power of the series or parallel circuits are equal to the sums of the two strip supercapacitors.

Hydrogen Storage Kinetics of Nanocrystalline and Amorphous LaMg_(12)-Type Alloy–Ni Composites Synthesized by Mechanical Milling

The nanocrystalline and amorphous LaMg11Ni ＋ x wt% Ni （x = 100, 200） composites were synthesized by the mechanical milling, and their gaseous and electrochemical hydrogen storage kinetics performance were systematically investigated, The results indicate that the as-milled composites exhibit excellent hydrogen storage kinetic performances, and increasing Ni content significantly facilitates the improvement of the hydrogen storage kinetics properties of the composites. The gaseous and electrochemical hydrogen storage kinetics of the composites reaches a maximum value with the variation of milling time. Increasing Ni content and milling time both make the hydrogen desorption activation energy lower, which are responsible for the enhancement in the hydrogen storage kinetics properties of the composites. The diffusion coefficient of hydrogen atom and activation enthalpy of charge transfer on the surface of the as-milled composites were also calculated, which are considered to be the dominated factors for the electrochemical high rate discharge ability.

Hydrogen storage thermodynamic and kinetic characteristics of PrMg12-type alloys synthesized by mechanical milling

To improve the hydrogen storage performance of PrMg12-type alloys, Ni was adopted to replace partially Mg in the alloys. The PrMgllNi＋x wt.% Ni （x=100, 200） alloys were prepared via mechanical milling. The phase structures and morphology of the experimental alloys were in vestigated by X-ray diffraction and transmission electron microscopy. The results show that increasing milling time and Ni content accelerate the formation of nanocrystalline and amorphous structure. The gaseous hydrogen storage properties of the experimental alloys were determined by differential scanning calorimetry （DSC） and Sievert apparatus. In addition, increasing milling time makes the hydrogenation rates of the alloys augment firstly and decline subsequently and the dehydrogenation rate always increases. The maximum capacity is 5. 572 wt. % for the x = 100 alloy and 5. 829 wt. % for the x = 200 alloy, respectively. The enthalpy change （ △H ）, entropy change （△S） and the dehydrogenation activation energy （Exde） markedly lower with increasing the milling time and the Ni content due to the generation of nanocrystalline and amorphous structure.

Hydrogen Storage Thermodynamics and Dynamics of Nd–Mg–NiBased Nd Mg_(12^-)Type Alloys Synthesized by Mechanical Milling

Nanocrystalline and amorphous Nd Mg_（12^-）type Nd Mg_（11）Ni＋ x wt% Ni（x=100, 200） hydrogen storage alloys were synthesized by mechanical milling. The effects of Ni content and milling time on hydrogen storage thermodynamics and dynamics of the alloys were systematically investigated. The gaseous hydrogen absorption and desorption properties were investigated by Sieverts apparatus and differential scanning calorimeter connected with a H_2 detector. Results show that increasing Ni content significantly improves hydrogen absorption and desorption kinetics of the alloys. Furthermore,varying milling time has an obvious effect on the hydrogen storage properties of the alloys. Hydrogen absorption saturation ratio（R^a_（10）; a ratio of the hydrogen absorption capacity in 10 min to the saturated hydrogen absorption capacity） of the alloys obtains the maximum value with varying milling time. Hydrogen desorption ratio（R^d_（20）, a ratio of the hydrogen desorption capacity in 20 min to the saturated hydrogen absorption capacity） of the alloys always increases with extending milling time. The improved hydrogen desorption kinetics of the alloys are considered to be ascribed to the decreased hydrogen desorption activation energy caused by increasing Ni content and milling time.

Activated graphene with tailored pore structure parameters for long cycle-life lithium-sulfur batteries

Activated graphene （AG） with various specific surface areas, pore volumes, and average pore sizes is fabricated and applied as a matrix for sulfur. The impacts of the AG pore structure parameters and sulfur loadings on the electrochemical performance of lithium-sulfur batteries are systematically investigated. The results show that specific capacity, cycling performance, and Coulombic efficiency of the batteries are closely linked to the pore structure and sulfur loading. An AG3/S composite electrode with a high sulfur loading of 72 wt.% exhibited an excellent long-term cycling stability （50% capacity retention over 1,000 cycles） and extra-low capacity fade rate （0.05% per cycle）. In addition, when LiNO3 was used as an electrolyte additive, the AG3/S electrode exhibited a similar capacity retention and high Coulombic efficiency （-98%） over 1,000 cycles. The excellent electrochemical performance of the series of AG3/S electrodes is attributed to the mixed micro/mesoporous structure, high surface area, and good electrical conductivity of the AG matrices and the well-distributed sulfur within the micro/mesopores, which is beneficial for electrical and ionic transfer during cycling.