Failure behaviors of anisotropic shale with a circular cavity subjected to uniaxial compression

Layered rock formations are frequently encountered during the excavation of underground structures. The stability of such structures is influenced not only by the stress concentration caused by the cavities in the strata but also by the anisotropy of the layered rock mass. The interaction between them can lead to critical structural failure, such as rupture, collapse, or significant deformation within the adjacent rock mass, thereby jeopardizing operational safety. However, the coupling law and mechanism between the stress concentration resulting from the cavities and the anisotropy of a layered rock mass remain unclear. In this study, a uniaxial compression test was performed on shale specimens containing a circular hole to investigate the effects of layer inclination and circular holes on the mechanical properties, elastic energy storage, and failure behaviors of these specimens. The failure mechanism of the rock surrounding the hole was analyzed on the basis of the single plane of weakness theory and the Kirsch solution. The test results indicated pronounced anisotropy in the compressive strength, elastic modulus, and elastic strain energy of the specimens, with distinct “V”, “M” and “U”-shaped patterns correlated with varying layer inclination angles. In addition, the combined effect of stress concentration and layer inclination resulted in different failure types, which were classified into four groups according to their failure behavior. Theoretical analysis revealed that failure around circular holes in layered rock is affected by a range of variables, such as layer inclination, layer strength, lateral pressure coefficient, azimuth, and loading stress.

Activation of zona incerta gamma-aminobutyric acid-ergic neurons alleviates depression-like and anxiety-like behaviors induced by chronic restraint stress

BACKGROUND Depression is a prevalent affective disorder,but its pathophysiology remains unclear.Dysfunction in the gamma-aminobutyric acid(GABA)-ergic system may contribute to its onset.Recently,antidepressants(e.g.,brexanolone,zuranolone)targeting the GABA-A receptor were introduced.The zona incerta(ZI),an inhibitory subthalamic region mainly composed of GABAergic neurons,has been implicated in emotional regulation.Deep brain stimulation of the ZI in humans affects anxiety and depression symptoms,while activation of ZI neurons in mice can either worsen or alleviate anxiety.Currently,there is no direct evidence linking GABAergic neurons in the ZI to depression-like behaviors in rodents.AIM To explore the relationship between GABAergic neurons in the ZI and depression-like behaviors in mice.METHODS A chronic restraint stress(CRS)model was utilized to induce depression in mice.Whole-cell patch-clamp recordings assessed the excitability changes of GABAergic neurons in the ZI.Additionally,chemogenetic techniques were employed to modulate ZI GABAergic neurons.The performance of the mice in behavioral tests for depression and anxiety was observed.RESULTS The findings indicated that GABAergic neurons in the ZI were closely associated with depression-like behaviors in mice.Twenty-eight days after the CRS model was established,depression-like and anxiety-like behaviors were observed in the mice.The excitability of GABAergic neurons in the ZI was reduced.Chemogenetic activation of these neurons alleviated CRS-induced depression-like and anxiety-like behaviors.Conversely,inhibition of GABAergic neurons in the ZI led to changes in emotion-related behavioral outcomes in mice.CONCLUSION Activity of GABAergic neurons in the ZI was closely associated with depression-like phenotypes in mice,suggesting that these neurons could be a potential therapeutic target for treating depression.

Plastic flow and interfacial bonding behaviors of embedded linear friction welding process:Numerical simulation combined with thermophysical experiment

In this study,a new linear friction welding(LFW)process,embedded LFW process,was put forward,which was mainly applied to combination manufacturing of long or overlong loadcarrying titanium alloy structural components in aircraft.The interfacial plastic flow behavior and bonding mechanism of this process were investigated by a developed coupling EulerianLagrangian numerical model using software ABAQUS and a novel thermo-physical simulation method with designed embedded hot compression specimen.In addition,the formation mechanism and control method of welding defects caused by uneven plastic flow were discussed.The results reveal that the plastic flow along oscillating direction of this process is even and sufficient.In the direction perpendicular to oscillation,thermo-plastic metals mainly flow downward along welding interface under coupling of shear stress and interfacial pressure,resulting in the interfacial plastic zone shown as an inverted“V”shape.The upward plastic flow in this direction is relatively weak,and only a small amount of flash is extruded from top of joint.Moreover,the wedge block and welding components at top of joint are always in un-steady friction stage,leading to nonuniform temperature field distribution and un-welded defects.According to the results of numerical simulation,high oscillating frequency combined with low pressure and small amplitude is considered as appropriate parameter selection scheme to improve the upward interfacial plastic flow at top of joint and suppress the un-welded defects.The results of thermo-physical simulation illustrate that continuous dynamic recrystallization(CDRX)induces the bonding of interface,accompanying by intense dislocation movement and creation of many low-angle grain boundaries.In the interfacial bonding area,grain orientation is random with relatively low texture density(5.0 mud)owing to CDRX.

Thermally-induced cracking behaviors of coal reservoirs subjected to cryogenic liquid nitrogen shock

The benefits of using cryogenic liquid nitrogen shock to enhance coal permeability have been confirmed from experimental perspectives.In this paper,we develop a fully coupled thermo-elastic model in combination with the strain-based isotropic damage theory to uncover the cooling-dominated cracking behaviors through three typical cases,i.e.coal reservoirs containing a wellbore,a primary fracture,and a natural fracture network,respectively.The progressive cracking processes,from thermal fracture initiation,propagation or cessation,deflection,bifurcation to multi-fracture interactions,can be well captured by the numerical model.It is observed that two hierarchical levels of thermal fractures are formed,in which the number of shorter thermal fractures consistently exceeds that of the longer ones.The effects of coal properties related to thermal stress levels and thermal diffusivity on the fracture morphology are quantified by the fracture fractal dimension and the statistical fracture number.The induced fracture morphology is most sensitive to changes in the elastic modulus and thermal expansion coefficient,both of which dominate the complexity of the fracture networks.Coal reservoir candidates with preferred thermal-mechanical properties are also recommended for improving the stimulation effect.Further findings are that there exists a critical injection temperature and a critical in-situ stress difference,above which no thermal fractures would be formed.Preexisting natural fractures with higher density and preferred orientations are also essential for the formation of complex fracture networks.The obtained results can provide some theoretical support for cryogenic fracturing design in coal reservoirs.

Microstructures and micromechanical behaviors of high -entropy alloys investigated by synchrotron X-ray and neutron diffraction techniques: A review

High-entropy alloys(HEAs)possess outstanding features such as corrosion resistance,irradiation resistance,and good mechan-ical properties.A few HEAs have found applications in the fields of aerospace and defense.Extensive studies on the deformation mech-anisms of HEAs can guide microstructure control and toughness design,which is vital for understanding and studying state-of-the-art structural materials.Synchrotron X-ray and neutron diffraction are necessary techniques for materials science research,especially for in situ coupling of physical/chemical fields and for resolving macro/microcrystallographic information on materials.Recently,several re-searchers have applied synchrotron X-ray and neutron diffraction methods to study the deformation mechanisms,phase transformations,stress behaviors,and in situ processes of HEAs,such as variable-temperature,high-pressure,and hydrogenation processes.In this review,the principles and development of synchrotron X-ray and neutron diffraction are presented,and their applications in the deformation mechanisms of HEAs are discussed.The factors that influence the deformation mechanisms of HEAs are also outlined.This review fo-cuses on the microstructures and micromechanical behaviors during tension/compression or creep/fatigue deformation and the application of synchrotron X-ray and neutron diffraction methods to the characterization of dislocations,stacking faults,twins,phases,and intergrain/interphase stress changes.Perspectives on future developments of synchrotron X-ray and neutron diffraction and on research directions on the deformation mechanisms of novel metals are discussed.

Snap-through behaviors and nonlinear vibrations of a bistable composite laminated cantilever shell:an experimental and numerical study

The snap-through behaviors and nonlinear vibrations are investigated for a bistable composite laminated cantilever shell subjected to transversal foundation excitation based on experimental and theoretical approaches.An improved experimental specimen is designed in order to satisfy the cantilever support boundary condition,which is composed of an asymmetric region and a symmetric region.The symmetric region of the experimental specimen is entirely clamped,which is rigidly connected to an electromagnetic shaker,while the asymmetric region remains free of constraint.Different motion paths are realized for the bistable cantilever shell by changing the input signal levels of the electromagnetic shaker,and the displacement responses of the shell are collected by the laser displacement sensors.The numerical simulation is conducted based on the established theoretical model of the bistable composite laminated cantilever shell,and an off-axis three-dimensional dynamic snap-through domain is obtained.The numerical solutions are in good agreement with the experimental results.The nonlinear stiffness characteristics,dynamic snap-through domain,and chaos and bifurcation behaviors of the shell are quantitatively analyzed.Due to the asymmetry of the boundary condition and the shell,the upper stable-state of the shell exhibits an obvious soft spring stiffness characteristic,and the lower stable-state shows a linear stiffness characteristic of the shell.

Impact of parenting styles on preschoolers’behaviors

In this editorial,I comment on the article“Association of preschool children behavior and emotional problems with the parenting behavior of both parents”which was published in the latest issue of“World Journal of Clinical Cases”that demonstrates the prevalence of behavioral disorders in preschool children.Therefore I am focused on parenting which is the most effective factor shown to affect the development and continuity of these behaviors.The management of child behavior problems is crucial.Children in early ages,especially preschoolers who are in the first 5 years of life,are influenced by dramatic changes in various aspects of development,such as social,emotional,and physical.Also,children experience many changes linked to different developmental tasks,such as discovering themselves,getting new friendships,and adapting to a new environment.In this period,parents have a critical role in supporting child development.If parents do not manage and overcome their child’s misbehavior,it could be transformed into psychosocial problems in adulthood.Parenting is the most powerful predictor in the social development of preschool children.Several studies have shown that to reduce the child’s emotional and behavioral problems,a warm relationship between parents and children is needed.In addition,recent studies have demonstrated significant relationships between family regulation factors and parenting,as well as with child behaviors.

Elastic-viscoplastic behaviors of polymer-blend geocell sheets:Numerical and experimental investigations

Polymer-blend geocell sheets(PBGS)have been developed as substitute materials for manufacturing geocells.Various attempts have been made to test and predict the behaviors of commonly used geogrids,geotextiles,geomembranes,and geocells.However,the elastic-viscoplastic behaviors of novel-developed geocell sheets are still poorly understood.Therefore,this paper investigates the elastic-viscoplastic behaviors of PBGS to gain a comprehensive understanding of their mechanical properties.Furthermore,the tensile load-strain history under various loading conditions is simulated by numerical calculation for widespread utilization.To achieve this goal,monotonic loading tests,short-term creep and stress relaxation tests,and multi-load-path tests(also known as arbitrary loading history tests)are performed using a universal testing machine.The results are simulated using the nonlinear three-component(NLTC)model,which consists of three nonlinear components,i.e.a hypo-elastic component,a nonlinear inviscid component,and a nonlinear viscid component.The experimental and numerical results demonstrate that PBGS exhibit significant elastic-viscoplastic behavior that can be accurately predicted by the NLTC model.Moreover,the tensile strain rates significantly influence the tensile load,with higher strain rates resulting in increased tensile loads and more linear load-strain curves.Also,parametric analysis of the rheological characteristics reveals that the initial tensile strain rates have negligible impact on the results.The rate-sensitivity coefficient of PBGS is approximately 0.163,which falls within the typical range observed in most geosynthetics.

Adsorption behaviors and mechanisms of gold recovery from thiosulfate solution by ion exchange resin

The adsorption behaviors and mechanisms of gold from thiosulfate solution on strong-base anion exchange resin were systematically investigated.The comparison experiment of adsorption ability and selectivity for gold showed that gel Amberlite IRA-400 resin with Type Ⅰ quaternary ammonium functional group had better adsorption performance.The increases of resin dosage,ammonia concentration and solution pH were favorable to gold adsorption,whereas the rises of cupric and thiosulfate concentrations were disadvantageous to gold loading.Microscopic characterization results indicated that gold was adsorbed in the form of [Au(S_(2)O_(3))_(2)]^(3–) complex anion by exchanging with the counter ion Cl^(–) in the functional group of the resin.Density functional theory calculation result manifested that gold adsorption was mainly depended on the hydrogen bond and van der Waals force generated between O atom in [Au(S_(2)O_(3))_(2)]^(3–) and H atom in the quaternary ammonium functional group of the resin.

Comparison of electrochemical behaviors of Ti-5Al-2Sn-4Zr-4Mo-2Cr-1Fe and Ti-6Al-4V titanium alloys in NaNO_(3) solution

The Ti-5Al-2Sn-4Zr-4Mo-2Cr-1Fe(β-CEZ)alloy is considered as a potential structural material in the aviation industry due to its outstanding strength and corrosion resistance.Electrochemical machining(ECM)is an efficient and low-cost technology for manufacturing theβ-CEZ alloy.In ECM,the machining parameter selection and tool design are based on the electrochemical dissolution behavior of the materials.In this study,the electrochemical dissolution behaviors of theβ-CEZ and Ti-6Al-4V(TC4)alloys in NaNO3solution are discussed.The open circuit potential(OCP),Tafel polarization,potentiodynamic polarization,electrochemical impedance spectroscopy(EIS),and current efficiency curves of theβ-CEZ and TC4 alloys are analyzed.The results show that,compared to the TC4 alloy,the passivation film structure is denser and the charge transfer resistance in the dissolution process is greater for theβ-CEZ alloy.Moreover,the dissolved surface morphology of the two titanium-based alloys under different current densities are analyzed.Under low current densities,theβ-CEZ alloy surface comprises dissolution pits and dissolved products,while the TC4 alloy surface comprises a porous honeycomb structure.Under high current densities,the surface waviness of both the alloys improves and the TC4 alloy surface is flatter and smoother than theβ-CEZ alloy surface.Finally,the electrochemical dissolution models ofβ-CEZ and TC4 alloys are proposed.

The Impact of Social Media on Dietary Behaviors and Body Image of College Students: A Qualitative Approach

Background: The use of social media platforms for health and nutrition information has become popular among college students. Although social media made information readily accessible in different formats, nutritional misinformation promoted by influencers and non-experts caused negative impact on diet behavior and perception of body image. Previous research indicated that extensive use of social media was positively linked to disordered eating behaviors. Social media platforms like Facebook and Instagram that allow users to follow celebrities intensified exposure to influencers’ messages and images and resulted in negative moods and body dissatisfaction. Objective: This paper aims to explore the impact of social media on college students’ dietary behaviors and body image. Participants: 18 undergraduate students from a public university in the Southern United States were recruited through a mass email. Methods: A cross-sectional qualitative study of three focus groups was conducted. The focus groups were based on guiding open-ended questions. Atlas.ti was used to code and analyze the data using inductive and deductive codes. Results: Three main themes were identified. The conditions theme included elements that explain why and how social media influences the participants’ actions. The actions theme included eating behavior, physical activity, and dietary supplement intake. The consequences theme describes anticipated or actual outcomes of actions such as body image and ideal weight. Conclusions: Social media has had a negative influence on diet behaviors and a positive influence on physical activity. Evidence-based nutrition and weight management information is needed to thwart potential misinformation.

Xylooligosaccharides Alleviate Inflammatory Dermatoses and Related Depression-Like Behaviors in Atopic Dermatitis Mice Induced by 2,4-Dinitrofluorobenzene

Objective:To investigate the influence of xylooligosaccharides on skin inflammation,behavioral characteristics,neurotransmitters,and gut flora in a mouse model of atopic dermatitis(AD)induced by 2,4-dinitrofluorobenzene(DNFB).Methods:The AD mouse model was created by administration of DNFB for 14 consecutive days.The scoring atopic dermatitis index,enzyme-linked immunosorbent assay(ELISA),histopathology,and immunohistochemical analyses were used to assess inflammation and depression-like behaviors.Furthermore,high-throughput 16S rRNA gene sequencing was used to determine the composition of fecal microbiota.Results:Xylooligosaccharides treatment reduced the number of scratches and skin thickness,mast cell infiltration and the levels of immunoglobulin(Ig)E and T-helper cytokines compared with the AD model group.Meanwhile,xylooligosaccharides treatment reduced the immobility time of mice in the forced swimming test and increased the total movement distance and movement distance in the center area in the open-field test.Furthermore,5-hydroxytryptamine and dopamine expression in the brain was increased following xylooligosaccharides treatment.Using network pharmacology,Gene Ontology analysis showed that the targets were mainly enriched in phosphatase binding and the regulation of leukocyte differentiation,which ameliorated AD mainly through the hypoxia inducible factor-1 and phosphatidylinositide 3-kinase-protein kinase B pathways.16S rRNA gene sequencing,diversity indices,and gut microbial taxonomic composition analysis showed DNFB-induced changes in intestinal microbiota diversity in AD mice.Comparative analysis indicated that xylooligosaccharides intake improved the gut microbiome by dramatically enhancing the concentration of Lactobacillus while decreasing the concentration of Bacteroides in mice.Conclusion:Xylooligosaccharides reduce inflammatory dermatosis and related depression-like behaviors via regulating intestinal homeostasis,having medicinal value as a nutritional and functional ingredient.

MD Simulation of Diffusion Behaviors in Collision Welding Processes of Al-Cu, Al-Al, Cu-Cu

To investigate the effects of material combinations and velocity conditions on atomic diffusion behavior near collision interfaces,this study simulates the atomic diffusion behavior near collision interfaces in Cu-Al,Al-Al and Cu-Cu combinations fabricated through collision welding using molecular dynamic(MD)simulation.The atomic diffusion behaviors are compared between similar metal combinations(Al-Al,Cu-Cu)and dissimilar metal combinations(Al-Cu).By combining the simulation results and classical diffusion theory,the diffusion coefficients for similar and dissimilar metal material combinations under different velocity conditions are obtained.The effects of material combinations and collision velocity on diffusion behaviors are also discussed.The diffusion behaviors of dissimilar material combinations strongly depend on the transverse velocity,whereas those of the similar material combinations are more dependent on the longitudinal velocity.These findings can provide guidance for optimizing welding parameters.

Liquefaction and post-liquefaction behaviors of sands affected by immersion-induced degradation of crushed mudstone

A series of undrained triaxial tests was conducted to investigate the effect of crushed mudstone with the immersion-induced degradation on the liquefaction and post-liquefaction properties,and the undrained shearing behavior without precedent cyclic-loading histories of sands containing crushed mudstone.The tested materials with a main particle diameter of 2-0.85 mm were prepared by mixing sands and crushed mudstone to reach the prescribed mudstone content defined by dry mass ranging from 0% to 50%.The mixtures were subjected to immersion under a certain stress level and were subsequently tested.In addition,one-dimensional compression tests were also supplementally performed to visually observe the immersion-induced degradation of crushed mudstone.The test results mainly showed that: (1) the liquefaction resistance,the post-liquefaction undrained strength,and the undrained strength without a precedent cyclic-loading history decreased significantly with increasing mudstone content,M c ,up to 20%;(2) even a small amount of crushed mudstone affected these strengths;(3) the above-mentioned large reductions in the strengths were attributed to the immersion-induced degradation of crushed mudstone;(4) at M_(c) >20%,the liquefaction resistance increased while the significant increase in the undrained static strengths with and without precedent cyclic-loading histories was not observed;and (5) the increase in the liquefaction resistance at M_(c) >20% may have been attributed to both the gradual increase in the plasticity and the formation of the soil aggregates among deteriorated crushed mudstone,while the increase in the specimen density did not play an important role in such behavior.

Dietary L-proline supplementation ameliorates autism-like behaviors and modulates gut microbiota in the valproic acid-induced mouse model of autism spectrum disorder

The effective intervention strategy for autism spectrum disorder(ASD)are currently limited.Herein,we attempted to evaluate the potential of L-proline(Pro),a multifunctional amino acid,in ameliorating autismlike behaviors and clarify the molecular mechanisms involved by using the typical valproic acid(VPA)-induced mouse model of ASD.Pro significantly attenuates repetitive behaviors and social dysfunction in ASD mice.The correlation analysis revealed that the beneficial effects of Pro on autism-like behaviors are related to the modulation of gut microbiota structure and composition.The histological analysis revealed that Pro could reverse the decrease of Nissl-positive cells in the prefrontal cortex(PFC)induced by VPA exposure.RNA sequencing demonstrated that Pro can also alter the PFC transcriptomic profile distinguished by the regulation of genes involved in Parkinson disease,neuroactive ligand-receptor interaction,oxidative phosphorylation,and mitogen activated protein kinase signaling pathway.Overall,dietary Pro supplementation may be a promising intervention strategy for ASD.

Finite Element Simulations on Failure Behaviors of Granular Materials with Microstructures Using a Micromechanics-Based Cosserat Elastoplastic Model

This paper presents a micromechanics-based Cosserat continuum model for microstructured granular materials.By utilizing this model,the macroscopic constitutive parameters of granular materials with different microstructures are expressed as sums of microstructural information.The microstructures under consideration can be classified into three categories:a medium-dense microstructure,a dense microstructure consisting of one-sized particles,and a dense microstructure consisting of two-sized particles.Subsequently,the Cosserat elastoplastic model,along with its finite element formulation,is derived using the extended Drucker-Prager yield criteria.To investigate failure behaviors,numerical simulations of granular materials with different microstructures are conducted using the ABAQUS User Element(UEL)interface.It demonstrates the capacity of the proposed model to simulate the phenomena of strain-softening and strain localization.The study investigates the influence of microscopic parameters,including contact stiffness parameters and characteristic length,on the failure behaviors of granularmaterials withmicrostructures.Additionally,the study examines themesh independence of the presented model and establishes its relationship with the characteristic length.A comparison is made between finite element simulations and discrete element simulations for a medium-dense microstructure,revealing a good agreement in results during the elastic stage.Somemacroscopic parameters describing plasticity are shown to be partially related to microscopic factors such as confining pressure and size of the representative volume element.

Integrating linear and nonlinear models to assess the built environment’s impact on older adults’behaviors in China

China is experiencing rapid population aging.The one contributing factor affecting senior citizens’lives is the disconnect between the built environment in urban and rural areas and the behavioral preferences of older adults.However,research on the relation between the built environment and the behavior of older individuals has been limited.Thus,this paper uses the most recent health tracking data on factors influencing aging in China released in 2020(China Senior Health Survey Tracking Survey).Applying traditional regression,least absolute shrinkage and selection operator regression,and two decision tree optimization models from machine learning,a comprehensive comparative study is carried out to investigate the correlation between the built environment and the physical activity,dietary habits,and social interactions of older age groups.The findings reveal that built environment variables most significantly impact physical activity,accounting for 52.525%,followed by social interaction behaviors at 50.202%and dietary intake at 47.991%.Furthermore,the authors identify population density and greenness rate as the built environment factors having considerable effects on the behavior of older adults.Thus,this study establishes a theoretical foundation for developing age-friendly community environments for older adults.

Database Search Behaviors: Insight from a Survey of Information Retrieval Practices

This study examines the database search behaviors of individuals, focusing on gender differences and the impact of planning habits on information retrieval. Data were collected from a survey of 198 respondents, categorized by their discipline, schooling background, internet usage, and information retrieval preferences. Key findings indicate that females are more likely to plan their searches in advance and prefer structured methods of information retrieval, such as using library portals and leading university websites. Males, however, tend to use web search engines and self-archiving methods more frequently. This analysis provides valuable insights for educational institutions and libraries to optimize their resources and services based on user behavior patterns.

Effects of nanostructuring on mechanical and tribological behaviors of FeCoNi medium-entropy alloy

The effects of nanostructuring on the mechanical and dry-sliding wear behaviors of a FeCoNi medium-entropy alloy(MEA)were systematically investigated through nano-indentation and ball-on-disc wear tests.The results show that reducing the grain size down into the nano-meter regime,on the one hand,significantly elevates the hardness of the FeCoNi alloy,and on the other hand,facilitates the formation of a surface oxide layer.As a result,the wear rate of the nanocrystalline(NC)FeCoNi alloy is one order of magnitude lower than its coarse-grained counterpart.The NC FeCoNi alloy also exhibits obviously enhanced wear resistance compared with conventional NC Ni and Ni-based alloys in terms of both lower wear rate and friction coefficient.Such enhancement in tribological properties mainly stems from the improved strain hardening ability,owing to the inevitable concentration heterogeneity in MEA that imposes extra resistance to dislocation motion.

Mechanical behaviors of mylonitic granite and granitic protomylonite in a deep ductile shear zone

For projects near the tectonic belt,mylonite of varying metamorphic degrees may be present.The matrix proportion of rock reflects its internal microscopic characteristics,thus it is beneficial for engineering geology to study the effect of the matrix proportion on the mechanical properties and rupture behaviors of rock.Samples of mylonitic granite and granitic protomylonite with varying matrix proportions were obtained from a ductile shear zone for a series of uniaxial compression and acoustic emission(AE)tests.The results showed that with the increase in matrix proportion,the average strength and elastic modulus of the samples increased,and the rock sample with the largest matrix proportion exhibited the maximum peak stress of 244.42 MPa,which was 45.86%greater than the average peak stress of the rock samples with the smallest matrix proportions.For the rock samples with larger matrix proportion,their mechanical parameters exhibited greater dispersion and the large-scale appearance of AE events occurred earlier,showing a relatively gradual failure process.These samples had larger accumulated AE parameter values and greater degree of failure.In contrast,for samples with smaller matrix proportions,the large-scale appearance of AE events occurred close to the peak stress,indicating that the occurrence of damage and fractures was centralized and instantaneous.These samples had lower accumulated AE parameter values and fewer cracks after failure.Additionally,for the rock samples with more matrix proportion,the average variance of the b-value was 1.1,which was lower than that of rock samples with the smallest matrix proportion(the average variance of the b-value was 3.7).Furthermore,it can be predicted that under certain stress,the failure depth around a tunnel is generally smaller when the strength of rock samples with larger matrix proportion is greater.