Simulation and Experimental Design of Load Adaptive Braking System on Two Wheeler

The braking quality is considered the main execution of the adaptive control framework that impacts the vehicle safety and rides solace astoundingly notably the stopping distance.This research work aims to create a pattern and design of an electromechanically adjusted lever that multiplies the applied braking force depending on the inputs given by the sensors to reduce the stopping distance of the vehicle.It is carried out using two main parts of the two-wheeler vehicle:thefirst part deals with the detection of load acting on the vehicle and identifying the required braking force to be applied,and the second part deals with the micro-controller which activates the stepper motor for varying the mechanical leverage ratio from various loads on the vehicle using two actively movable wedges.The electromechanically operated variable braking force system is developed to actuate the braking system based on the load on the motorcycle.The MATLAB simulation and experimental work are carried out for various loading(driver and pillion)conditions on a two-wheeler.The results indicate that the proposed electronically operated braking system is more effective than the conventional braking system for various loads and vehicle speeds.Specifically,the stopping distance of the vehicle is decreased significantly by about 4.9%between the con-ventional braking system and the simulated proposed system.Further,the experi-mental results show that the stopping distance is condensed by about 4.1%.The validation between simulated and experimental results revealed a great deal with the least error percentage of about 0.8%.

Adaptive bit and power loading algorithm with low complexity in MIMO-OFDM systems

Two adaptive power and bit loading algorithms to maximize the throughput of MIMO-OFDM systems in frequency selective fading environment are proposed. The two algorithms allocate bit based on maximizing the overall throughput. One algorithm allocates power based on guaranteeing that the bit error rate （BER） of each sub-carrier and the total allocated power remain below a target BER threshold and a power threshold, respectively; another one allocates power based on guaranteeing that the mean BER of sub-carriers and the total allocated power remain below a target BER threshold and a power threshold, respectively. The simulation results show that the proposed algorithms can achieve faster throughput with lower computational complexity, which indicates that the proposed algorithms are effective when compared to some existing algorithms.

Adaptive Bit Loading Scheme with Semi-Blind Channel Estimation for OFDMSystems

An adaptive bit loading and power-allocation scheme is proposed in order to augment the performance of the system based on orthogonal frequency division multiplexing （OFDM）, which is based on the maximum power margin. Coinciding with the adaptive loading scheme, a semi-blind channel estimation algorithm using subspace decomposition method is proposed, which uses the information in the cyclic prefix. An initial channel state information is estimated by using the training sequences with the method of interpolation filtering. The proposed adaptive scheme is simulated on an OFDM wireless local area network（WLAN） system in a time-varying channel. The performance is compared to the constant loading scheme.

A PRIORITY-BASED POLLING SCHEDULING ALGORITHM FOR ARBITRATION POLICY IN NETWORK ON CHIP

A solution is imperatively expected to meet the efficient contention resolution schemes for managing simultaneous access requests to the communication resources on the Network on Chip (NoC). Based on the ideas of conflict-free transmission, priority-based service, and dynamic self-adaptation to loading, this paper presents a novel scheduling algorithm for Medium Access Control (MAC) in NoC with the researches of the communication structure features of 2D mesh. The algorithm gives priority to guarantee the Quality of Service (QoS) for local input port as well as dynamic adjustment of the performance of the other ports along with input load change. The theoretical model of this algorithm is established with Markov chain and probability generating function. Mathematical analysis is made on the mean queue length and the mean inquiry cyclic time of the system. Simulated experiments are conducted to test the accuracy of the model. It turns out that the findings from theoretical analysis correspond well with those from simulated experiments. Further more, the analytical findings of the system performance demonstrate that the algorithm enables effectively strengthen the fairness and stability of data transmissions in NoC.

Adaptive Power and Bit Allocation in Multicarrier Systems

We present two adaptive power and bit allocation algorithms for multicarrier systems in a frequency selective fading environment. One algorithm allocstes bit based on maximizing the channel capacity, another allocates bit based on minimizing the bit-error-rate （BER）. Two algorithms allocate power based on minimizing the BER. Results show that the proposed algorithms are more effective than Fischer＇s algorithm at low average signal-to-noise ration （SNR）. This indicates that our algorithms can achieve high spectral efficiency and high communication reliability during bad channel state. Results also denote the bit and power allocation of each algorithm and effects of the number of subcarriers on the BER performance.

Adaptive Under-Frequency Load Shedding

Under-frequency load shedding （UFLS） is used in the power industry to rescue systems facing extreme disturbances to avoid system collapse. Traditionally, many computations are repeated to seek the proper power system settings such that the UFLS provides the desired good performance for selected scenarios. An adaptive UFLS method based on the genetic algorithm was developed to automate the finding of optimal parameters to minimize the repetitive trial-error calculations. Simulations demonstrate that the method has better performance than previous schemes and reduces the time and effort of the repetitive simulations.

Adaptive Subband Bit and Power Loading Algorithm and its Application to OFDM Based IEEE 802 .16e

For OFDM systems with hundreds or thousands subcarriers with the adaptive bit and power loading according to each subcarrier , the signaling overhead will be awfully large. However, the adaptive bit and power loading according to “subband” is an effective solution to this problem, with which the signaling overhead is expected to be dramatically decreased at the cost of some performance loss. In this paper, based on Ref . [5] but with some modification to the subband bit and power loading algorithm, we apply the algorithm to the IEEE 802.16e OFDM system. The results show that the modified subband bit and power loading algorithm can achieve better BER performance and the signaling overhead is reduced by 75% at the cost of performance loss less than 1 dB if the number of subcarriers per subband is 4 when the BER is around 10^-3.

Load adaptive start-up scheme for synchronous boost DC–DC converter

This paper presents a load adaptive soft-start scheme through which the inductor current of the synchronous boost DC-DC converter can trace the load current at the start-up stage. This scheme effectively eliminates the inrush-current and over-shoot voltage and improves the load capability of the converter. According to the output voltage, the start-up process is divided into three phases and at each phase the inductor current is limited to match the load. In the precharge phase, a step-increasing constant current gives a smooth rise of the output voltage which avoids inrush current and ensures the converter successfully starts up at different load situations. An additional ring oscillator operation phase enables the converter to start up as low as 1.4 V. When the converter enters into the system loop soft-start phase, an output voltage and inductor current detection methods make the transition of the phases smooth and the inductor current and output voltage rise steadily. Effective protection circuits such as short-circuit protection, current limit circuit and over-temperature protection circuit are designed to guarantee the safety and reliability of the chip during the start-up process. The proposed start-up circuit is implemented in a synchronous boost DC-DC converter based on TSMC 0.35μm CMOS process with an input voltage range 1.4-4.2 V, and a steady output voltage 5 V, and the switching frequency is 1 MHz. Simulation results show that inrush current and overshoot voltage are suppressed with a load range from 0-2.1 A, and inductor current is as low as 259 mA when the output shorts to the ground.

Adaptive Fuzzy Torque Control of Passive Torque Servo Systems Based on Small Gain Theorem and Input-to-state Stability

Passive torque servo system （PTSS） simulates aerodynamic load and exerts the load on actuation system, but PTSS endures position coupling disturbance from active motion of actuation system, and this inherent disturbance is called extra torque. The most important issue for PTSS controller design is how to eliminate the influence of extra torque. Using backstepping technique, adaptive fuzzy torque control （AFTC） algorithm is proposed for PTSS in this paper, which reflects the essential characteristics of PTSS and guarantees transient tracking performance as well as final tracking accuracy. Takagi-Sugeno （T-S） fuzzy logic system is utilized to compensate parametric uncertainties and unstructured uncertainties. The output velocity of actuator identified model is introduced into AFTC aiming to eliminate extra torque. The closed-loop stability is studied using small gain theorem and the control system is proved to be semiglobally uniformly ultimately bounded. The proposed AFTC algorithm is applied to an electric load simulator （ELS）, and the comparative experimental results indicate that AFTC controller is effective for PTSS.