Model-Free Adaptive Frequency Calibration for Voltage-Controlled Oscillators

The operating frequency accuracy of the local oscillators is critical for the overall system performance in the communication systems.However,the high-precision oscillators could be too expensive for civil applications.In this paper,we propose a model-free adaptive frequency calibration framework for a voltage-controlled crystal oscillator(VCO)equipped with a time to digital converter(TDC),which can significantly improve the frequency accuracy of the VCO thus calibrated.The idea is to utilize a high-precision TDC to directly measure the VCO period which is then passed to a model-free method for working frequency calibration.One advantage of this method is that the working frequency calibration employs the system history of input/output(I/O)data,instead of establishing an accurate VCO voltagecontrolled oscillator model.Another advantage is the lightweight calibration method with low complexity such that it can be implemented on an MCU with limited computation capabilities.Experimental results show that the proposed calibration method can improve the frequency accuracy of a VCO from±20 ppm to±10 ppb,which indicates the promise of the modelfree adaptive frequency calibrator for VCOs.

A Synchronization Acquisition Algorithm Based on the Frequency Hopping Pulses Combining

As modern electromagnetic environments are more and more complex,the anti-interference performance of the synchronization acquisition is becoming vital in wireless communications.With the rapid development of the digital signal processing technologies,some synchronization acquisition algorithms for hybrid direct-sequence(DS)/frequency hopping(FH)spread spectrum communications have been proposed.However,these algorithms do not focus on the analysis and the design of the synchronization acquisition under typical interferences.In this paper,a synchronization acquisition algorithm based on the frequency hopping pulses combining(FHPC)is proposed.Specifically,the proposed algorithm is composed of two modules:an adaptive interference suppression(IS)module and an adaptive combining decision module.The adaptive IS module mitigates the effect of the interfered samples in the time-domain or the frequencydomain,and the adaptive combining decision module can utilize each frequency hopping pulse to construct an anti-interference decision metric and generate an adaptive acquisition decision threshold to complete the acquisition.Theory and simulation demonstrate that the proposed algorithm significantly enhances the antiinterference and anti-noise performances of the synchronization acquisition for hybrid DS/FH communications.

Research on blind source separation of operation sounds of metro power transformer through an Adaptive Threshold REPET algorithm

Purpose–The safe operation of the metro power transformer directly relates to the safety and efficiency of the entire metro system.Through voiceprint technology,the sounds emitted by the transformer can be monitored in real-time,thereby achieving real-time monitoring of the transformer’s operational status.However,the environment surrounding power transformers is filled with various interfering sounds that intertwine with both the normal operational voiceprints and faulty voiceprints of the transformer,severely impacting the accuracy and reliability of voiceprint identification.Therefore,effective preprocessing steps are required to identify and separate the sound signals of transformer operation,which is a prerequisite for subsequent analysis.Design/methodology/approach–This paper proposes an Adaptive Threshold Repeating Pattern Extraction Technique(REPET)algorithm to separate and denoise the transformer operation sound signals.By analyzing the Short-Time Fourier Transform(STFT)amplitude spectrum,the algorithm identifies and utilizes the repeating periodic structures within the signal to automatically adjust the threshold,effectively distinguishing and extracting stable background signals from transient foreground events.The REPET algorithm first calculates the autocorrelation matrix of the signal to determine the repeating period,then constructs a repeating segment model.Through comparison with the amplitude spectrum of the original signal,repeating patterns are extracted and a soft time-frequency mask is generated.Findings–After adaptive thresholding processing,the target signal is separated.Experiments conducted on mixed sounds to separate background sounds from foreground sounds using this algorithm and comparing the results with those obtained using the FastICA algorithm demonstrate that the Adaptive Threshold REPET method achieves good separation effects.Originality/value–A REPET method with adaptive threshold is proposed,which adopts the dynamic threshold adjustment mechanism,adaptively calculates the threshold for blind source separation and improves the adaptability and robustness of the algorithm to the statistical characteristics of the signal.It also lays the foundation for transformer fault detection based on acoustic fingerprinting.

Adaptive Fourier Decomposition Based Time-Frequency Analysis

The attempt to represent a signal simultaneously in time and frequency domains is full of challenges. The recently proposed adaptive Fourier decomposition （AFD） offers a practical approach to solve this problem. This paper presents the principles of the AFD based time-frequency analysis in three aspects： instantaneous frequency analysis, frequency spectrum analysis, and the spectrogram analysis. An experiment is conducted and compared with the Fourier transform in convergence rate and short-time Fourier transform in time-frequency distribution. The proposed approach performs better than both the Fourier transform and short-time Fourier transform.

Adaptive Time Frequency Distribution Based on Linear Chirp Modulated Gaussian Functions

We propose a method that uses linear chirp modulated Gaussian functions as the elementary functions, by adaptively adjusting variances, time frequency centers and sweep rates, to decompose signals. By taking WVD, an improved adaptive time frequency distribution is developed, which is non negative, free of cross term interference, and of better time frequency resolution. The paper presents an effective numerical algorithm to estimate the optimal parameters of the basis. Simulations indicate that the proposed approach is effective in analyzing signal's time frequency behavior.

Adaptive Output Regulation of a Class of Nonlinear Output Feedback Systems With Unknown High Frequency Gain

This paper presents an output feedback design approach based on the adaptive control scheme developed for nonlinearly parameterized systems,to achieve global output regulation for a class of nonlinear systems in output feedback form.We solve the output regulation problem without the knowledge of the sign and the value of the high frequency gain a priori.It is not necessary to have both the limiting assumptions that the exogenous signal co and the unknown parameter ju belong to a prior known compact set and the high frequency gain has a determinate lower and upper bounds.The effectiveness of the proposed algorithm is shown with the help of an example.

An Active Anti-Jamming Approach for Frequency Diverse Array Radar with Adaptive Weights

Due to the rapid development of electronic countermeasures(ECMs),the corresponding means of electronic counter countermeasures(ECCMs)are urgently needed.In this paper,an act-ive anti-jamming method based on frequency diverse array radar is proposed.By deriving the closed form of the phase center in a uniform line array FDA,we establish a model of the FDA signal based on adaptive weights and derive the effect of active anti-jamming in this regime.The pro-posed active anti-jamming method makes it difficult for jammers to detect or locate our radar.Fur-thermore,the effectiveness of the two frequency increment schemes in terms of anti-jamming is ana-lyzed by comparing the deviation of phase center.Finally,the simulation results verify the effective-ness and superiority of the proposed method.

Adaptive Soft Frequency Reuse Scheme for In-building Dense Femtocell Networks

Femtocell networks have emerged as a key technology in residential, office building or hotspot deployments that can sig- nificantly fulfill high data demands in order to offioad indoor traffic from outdoor macro cells. However, as one of the major challenges, inter-femtocell interference gets worse in 3D in-building scenarios because of the presence of numerous interfering sources and then needs to be considered in the early network planning phase. The indoor network planning and optimization tool suite, Ranplan Small- cell~, makes accurate prediction of indoor wireless RF signal propagation possible to guide actual indoor femtocell deployments. In this paper, a new adaptive soft frequency reuse scheme in the dense femtocell networks is proposed, where multiple dense femtocells are classified into a number of groups according to the dominant interference strength to others, then the minimum subchannels with different frequency reuse factors for these groups are determined and transmit powers of the group- ing sub-channels are adaptively adjusted based on the strength to mitigate the mutual inter- ference. Simulation results show the proposed scheme yields great performance gains in terms of the spectrum efficiency relative to the legacy soft frequency reuse and universal fre- quency reuse.

Multi-Frequency Interference Detection and Mitigation Using Multiple Adaptive IIR Notch Filter with Lattice Structure

Radio Frequency Interferences (RFI), such as strong Continuous Wave Interferences (CWI), can influence the Quality of Service (QoS) of communications, increasing the Bit Error Rate (BER) and decreasing the Signal-to-Noise Ratio (SNR) in any wireless transmission, including in a Digital Video Broadcasting (DVB-S2) receiver. Therefore, this paper presents an algorithm for detecting and mitigating a Multi-tone Continuous Wave Interference (MCWI) using a Multiple Adaptive Notch Filter (MANF), based on the lattice form structure. The Adaptive Notch Filter (ANF) is constructed using the second-order IIR NF. The approach consists in developing a robust low-complexity algorithm for removing unknown MCWI. The MANF model is a multistage model, with each stage consisting of two ANFs: the adaptive IIR notch filter Hl(z) and the adaptive IIR notch filter HN(z), which can detect and mitigate CWI. In this model, the ANF is used for estimating the Jamming-to-Signal Ratio (JSR) and the frequency of the interference (w(0)) by using an LMS-based algorithm. The depth of the notch is then adjusted based on the estimation of the JSR. In contrast, the ANF HN(z) is used to mitigate the CW interference. Simulation results show that the proposed ANF is an effective method for eliminating/reducing the effects of MCWI, and yields better system performance than full suppression (kN=1) for low JSR values, and mostly the same performance for high JSR values. Moreover, the proposed can detect low and high JSR and track hopping frequency interference and provides better Bit error ratio (BER) performance compared to the case without an IIR notch filter.

Parametric adaptive time-frequency representation based on time-sheared Gabor atoms

A localized parametric time-sheared Gabor atom is derived by convolving a linear frequency modulated factor, modulating in frequency and translating in time to a dilated Gaussian function, which is the generalization of Gabor atom and is more delicate for matching most of the signals encountered in practice, especially for those having frequency dispersion characteristics. The time-frequency distribution of this atom concentrates in its time center and frequency center along energy curve, with the curve being oblique to a certain extent along the time axis. A novel parametric adaptive time-frequency distribution based on a set of the derived atoms is then proposed using a adaptive signal subspace decomposition method in frequency domain, which is non-negative time-frequency energy distribution and free of cross-term interference for multicomponent signals. The results of numerical simulation manifest the effectiveness of the approach in time-frequency representation and signal de-noising processing.

Variable Structure Model Reference Adaptive Control with Unknown High Frequency Gain Sign

可变结构模型引用为有比一个和未知高频率获得符号大的相对的度的工厂的适应控制被建议。一个切换的计划基于为靠近的环系统的第一个辅助错误设计的监视功能被介绍。在至多切换和追踪的错误的一个有限数字收敛到能被适当地选择一些设计参数使任意地小的一个剩余集合以后，在监视函数的管理下面，切换停止，这被显示出在至多切换和追踪的错误的一个有限数字收敛到能被适当地选择一些设计参数使任意地小的一个剩余集合以后。

Unsupervised FIR adaptive filtering and its frequency domain analysis

An unsupervised minimum mean square error FIR adaptive filtering （UAF） algorithm is proposed to estimate the system＇ s input signal. The algorithm only uses the system＇ s output signal and noise variance without requiring knowledge of a reference signal. The frequency analysis shows that the UAF is a multi-spot bandpass filter with passing frequency determined by the system＇ s input signal. Namely, the UAF chooses the expected frequency and extremely restricts the unwanted fre- quency signal by using weight-updating scheme in time domain. However, the UAF presents the Gibbs phenomenon since the ideal filter is infinitely long which is unrealizable. The simulation and experimental results show that the UAF could effectively reduce the amplitude of the noise and im- prove the signal to noise ratio.

Frequency Domain Adaptive Learning Algorithm for Thoracic Electrical Bioimpedance Enhancement

The Thoracic Electrical Bioimpedance(TEB)helps to determine the stroke volume during cardiac arrest.While measuring cardiac signal it is contaminated with artifacts.The commonly encountered artifacts are Baseline wander(BW)and Muscle artifact(MA),these are physiological and nonstationary.As the nature of these artifacts is random,adaptive filtering is needed than conventional fixed coefficient filtering techniques.To address this,a new block based adaptive learning scheme is proposed to remove artifacts from TEB signals in clinical scenario.The proposed block least mean square(BLMS)algorithm is mathematically normalized with reference to data and error.This normalization leads,block normalized LMS(BNLMS)and block error normalized LMS(BENLMS)algorithms.Various adaptive artifact cancellers are developed in both time and frequency domains and applied on real TEB quantities contaminated with physiological signals.The ability of these techniques is measured by calculating signal to noise ratio improvement(SNRI),Excess Mean Square Error(EMSE),and Misadjustment(Mad).Among the considered algorithms,the frequency domain version of BENLMS algorithm removes the physiological artifacts effectively then the other counter parts.Hence,this adaptive artifact canceller is suitable for real time applications like wearable,remove health care monitoring units.

Adaptive Fuzzy Backstepping Output Feedback Control of Nonlinear Time-delay Systems with Unknown High-frequency Gain Sign

In this paper, an adaptive fuzzy robust feedback control approach is proposed for a class of single-input and singleoutput （SISO） strict-feedback nonlinear systems with unknown nonlinear functions, time delays, unknown high-frequency gain sign, and without the measurements of the states. In the backstepping recursive design, fuzzy logic systems are employed to approximate the unknown smooth nonlinear functions, K-filters is designed to estimate the unmeasured states, and Nussbaum gain functions are introduced to solve the problem of unknown sign of high-frequency gain. By combining adaptive fuzzy control theory and adaptive backstepping design, a stable adaptive fuzzy output feedback control scheme is developed. It has been proven that the proposed adaptive fuzzy robust control approach can guarantee that all the signals of the closed-loop system are uniformly ultimately bounded and the tracking error can converge to a small neighborhood of the origin by appropriately choosing design parameters. Simulation results have shown the effectiveness of the proposed method.

Detection of Underwater Objects by Adaptive Threshold FCM Based on Frequency Domain and Time Domain

According to the characteristics of sonar image data with big data feature, In order to accurately detect underwater objects of sonar image, a novel adaptive threshold FCM (Fuzzy Clustering Algorithm, FCM) based on frequency domain and time domain is proposed. Based on the relationship between sonar image data and big data, Firstly, wavelet de-noising method is used to smooth noise. After de-noising, the sonar image is blocked and each sub-block region is processed by two-dimensional discrete Fourier transform, their maximum amplitude spectrum used as frequency domain character, then time domain of mean and standard deviation, frequency domain of maximum amplitude spectrum are taken for character to complete block k-means clustering, the initial clustering center is determined, after that made use of FCM on sonar image detection, based on clustered image, adaptive threshold is constructed by the distribution of sonar image sea-bottom reverberation region, and final detection results of sonar image are completed. The comparison different experiments demonstrate that the proposed algorithm get good detection precision and adaptability.

Network Sorting Algorithm of Multi-Frequency Signal with Adaptive SNR

An signal noise ratio（ SNR） adaptive sorting algorithm using the time-frequency（ TF）sparsity of frequency-hopping（ FH） signal is proposed in this paper. Firstly,the Gabor transformation is used as TF transformation in the system and a sorting model is established under undetermined condition; then the SNR adaptive pivot threshold setting method is used to find the TF single source. The mixed matrix is estimated according to the TF matrix of single source. Lastly,signal sorting is realized through improved subspace projection combined with relative power deviation of source. Theoretical analysis and simulation results showthat this algorithm has good effectiveness and performance.

Carrier frequency and symbol rate estimation based on cyclic spectrum

Carrier frequency and symbol rate estimation are the main contents of parameter estimation,which is the basis of modulation recognition and further processing of signals especially in non-cooperative communication.With the development of wireless communication,the signal transmission environment has become increasingly bad,causing more difficulties in parameter estimation.It is well known that the signal cycle spectrum is robust to noises and signal parameters are closely related.In practice,it is impossible to calculate the cyclic spectrum of infinite length data signals.When using finite length data to obtain a cycle spectrum,the truncation noise is induced,resulting in interference.It is necessary to overcome the influence of noises in order to improve the detection ability of discrete spectral lines.An improved method of the discrete spectral line extraction algorithm is proposed by reflecting the amplitude advantage of discrete spectral lines through salient features of continuous noises in discrete spectral line neighborhood.

Joint Estimation of Carrier Frequency and Phase Offset Based on Pilot Symbols in Quasi-Constant Envelope OFDM Satellite Systems

Spectral efficiency and energy efficiency are two important performance indicators of satellite systems. The Quasi-Constant Envelope Orthogonal Frequency Division Multiplexing(QCE-OFDM) technique can achieve both high spectral efficiency and low peak-to-average power ratio(PAPR). Therefore, the QCE-OFDM technique is considered as a promising candidate multi-carrier technique for satellite systems. However, the Doppler effect will cause the carrier frequency offset(CFO), and the non-ideal oscillator will cause the carrier phase offset(CPO) in satellite systems. The CFO and CPO will further result in the bit-error-rate(BER) performance degradation. Hence, it is important to estimate and compensate the CFO and CPO. This paper analyzes the effects of both CFO and CPO in QCE-OFDM satellite systems. Furthermore, we propose a joint CFO and CPO estimation method based on the pilot symbols in the frequency domain. In addition, the optimal pilot symbol structure with different pilot overheads is designed according to the minimum Cramer-Rao bound(CRB) criterion. Simulation results show that the estimation accuracy of the proposed method is close to the CRB.

Blind carrier frequency estimation for phase shift keying signals in low signal to noise ratio

In order to solve the problem of carrier frequency blind estimation of PSK signals in electronic reconnaissance, a new estimation method was proposed. The phase shift keying（PSK） signal was divided into several overlapping intervals which had equal length, and the spectrum concentration measures of every interval were extracted by the FFT. And then, using the grid-density clustering, the spectrum concentration measures were classified into two categories, the narrowband spectrum interval and the wideband spectrum interval. The narrowband spectrum interval was regarded as the characteristic class. The spectrums of the characteristic class were accumulated to estimate the carrier frequency of PSK signal. The proposed method had avoided the non linear operation in the traditional PSK signal carrier frequency estimation algorithm. Thus, the signal to noise ratio （SNR） threshold was remarkably decreased. Moreover, the proposed method did not need the prior knowledge of the signal, which was suitable to the electronic reconnaissance occasion. Experimental results had verified the validity of the proposed estimation method in low SNR.

Carrier frequency disturbance distributions on GPS during equatorial ionospheric scintillation

In the equatorial region,deep amplitude fading in global positioning system(GPS)signals frequently occurs during the strong ionospheric scintillation,it can lead to the loss of lock in GPS carrier tracking loops,and result in increased positioning error and even navigation interruption.The relationships between amplitude scintillation indices and detrended carrier frequency are investigated,based on GPS L1 C/A signals during the last peak of the solar cycle at the low latitude site of São Josédos Campos,Brazil(23.2S,45.9W)from 2013 to 2015.Corresponding mathematic model of the probability distribution function is built for the first time to provide statistical analysis on the above relationships.The results show that the standard carrier frequencies reveal an almost linear relation with the amplitude scintillation indices.Moreover,the frequency widths of detrended frequency are proportional to levels of amplitude scintillation when the value of the peak probability is lower than the corresponding boundary.A conclusion can be drawn that different levels of amplitude scintillation will influence the fluctuation of the carrier frequency.The analysis will provide useful guidance to set the receiver’s bandwidth with respect to the different scintillation levels and design the advanced tracking algorithms to improve the robustness and precision of the GPS receiver.