Developing effective irrigation and drainage strategies to improve the quality of saline-alkali soil is vital for enhancing agricultural production and increasing economic returns. In this study, we explored how irrig...Developing effective irrigation and drainage strategies to improve the quality of saline-alkali soil is vital for enhancing agricultural production and increasing economic returns. In this study, we explored how irrigation and drainage modes (flood irrigation, drip irrigation, and sub-surface pipe drainage under drip irrigation) improve the saline-alkali soil in Xinjiang, China. We aimed to study the transport characteristics of soil water and salt under different irrigation and drainage modes, and analyze the effects of the combination of irrigation and drainage on soil salt leaching, as well as its impacts on the growth of oil sunflower. Our results show that sub-surface pipe drainage under drip irrigation significantly reduced the soil salt content and soil water content at the 0–200 cm soil depth. Under sub-surface pipe drainage combined with drip irrigation, the mean soil salt content was reduced to below 10 g/kg after the second irrigation, and the soil salt content decreased as sub-surface pipe distance decreased. The mean soil salt content of flood irrigation exceeded 25 g/kg, and the mean soil desalination efficiency was 3.28%, which was lower than that of drip irrigation. The mean soil desalination rate under drip irrigation and sub-surface pipe drainage under drip irrigation was 19.30% and 58.12%, respectively. After sub-surface drainage regulation under drip irrigation, the germination percentage of oil sunflower seedlings was increased to more than 50%, which further confirmed that combined drip irrigation and sub-surface pipe drainage is very effective in improving the quality of saline-alkali soil and increasing the productivity of agricultural crops.展开更多
The removal efficiency of Cu and Zn from swine wastewater was evaluated as effected by three variables: the hydraulic retention time (HRT) (24, 48, 72 and 96 hours), two different plant species (Typha domingensis Pers...The removal efficiency of Cu and Zn from swine wastewater was evaluated as effected by three variables: the hydraulic retention time (HRT) (24, 48, 72 and 96 hours), two different plant species (Typha domingensis Pers. and Eleocharis cellulosa) and two different sizes of filter media (5 and 15 mm) using a horizontal sub-surface flow constructed wetland. From the results, a significant difference was observed in the removal efficiency of Cu and Zn with respect to different hydraulic retention times. The best results were obtained in the HRT of 96 hours for Zn where 96% removal of Zn with Typha domingensis Pers. specie with gravel of 15 mm (experimental unit 6) was achieved. For Cu, at 72 hours of HRT, the efficiency was nearly 100% in five of the six study units (1, 2, 3, 5 and 6). In contrast, in experimental unit 4 with gravel of 15 mm and without plants, only 86% Cu removal was achieved.展开更多
An Arctic Ocean eddy in sub-surface layer is analyzed in this paper by use of temperature, salinity and current profiles data obtained at an ice camp in the Canada Basin during the second Chinese Arctic Expedition in ...An Arctic Ocean eddy in sub-surface layer is analyzed in this paper by use of temperature, salinity and current profiles data obtained at an ice camp in the Canada Basin during the second Chinese Arctic Expedition in summer of 2003. In the vertical temperature section, the eddy shows itself as an isolated cold water block at depth of 60 m with a minimum temperature of - 1.5℃, about 0.5℃ colder than the ambient water. Isopycnals in the eddy form a pattern of convex, which indicates the eddy is anticyclonic. Although maximum velocity near 0.4 m s^-1 occurs in the current records observed synchronously, the current pattern is far away from a typical eddy. By further analysis, inertial frequency osci/lations with amplitudes comparable with the eddy velocity are found in the sub-surface layer currents. After filter the inertial current and mean current, an axisymmetric current pattern of an eddy with maximum velocity radius of 5 km is obtained. The analysis of the T-S characteristics of the eddy core water and its ambient waters supports the conclusion that the eddy was formed on the Chukchi Shelf and migrated northeastward into the northern Canada Basin.展开更多
The aim of the present study is to improve the capabilities and precision of a recently introduced Sea Surface Acoustic Simulator(SSAS) developed based on optimization of the Helmholtz–Kirchhoff–Fresnel(HKF) method....The aim of the present study is to improve the capabilities and precision of a recently introduced Sea Surface Acoustic Simulator(SSAS) developed based on optimization of the Helmholtz–Kirchhoff–Fresnel(HKF) method. The improved acoustic simulator, hereby known as the Modified SSAS(MSSAS), is capable of determining sound scattering from the sea surface and includes an extended Hall–Novarini model and optimized HKF method. The extended Hall–Novarini model is used for considering the effects of sub-surface bubbles over a wider range of radii of sub-surface bubbles compared to the previous SSAS version. Furthermore, MSSAS has the capability of making a three-dimensional simulation of scattered sound from the rough bubbly sea surface with less error than that of the Critical Sea Tests(CST) experiments. Also, it presents scattered pressure levels from the rough bubbly sea surface based on various incident angles of sound. Wind speed, frequency, incident angle, and pressure level of the sound source are considered as input data, and scattered pressure levels and scattering coefficients are provided. Finally, different parametric studies were conducted on wind speeds, frequencies, and incident angles to indicate that MSSAS is quite capable of simulating sound scattering from the rough bubbly sea surface, according to the scattering mechanisms determined by Ogden and Erskine. Therefore, it is concluded that MSSAS is valid for both scattering mechanisms and the transition region between them that are defined by Ogden and Erskine.展开更多
This study aims at identifying possible correlations between shapes, types of geophysical anomalies and borehole productivity according to geological and hydrogeotogical contexts. The methodology adopted was a two-pro...This study aims at identifying possible correlations between shapes, types of geophysical anomalies and borehole productivity according to geological and hydrogeotogical contexts. The methodology adopted was a two-pronged one--the first step sought to： （1） interpret the electrical resistivity values from horizontal profiling and vertical electrical sounding implemented in Seno province that preceded the drilling of 513 boreholes; （ii） interpret data from pumping tests carried out on boreholes having a discharge superior to 1 m3/h （＂positive borehole＂） by using Cooper-Jacob＇s method. In the second step, according to geology, authors tried to identify possible correlations between each of the qualitative geophysical parameters： ~shape of anomaly〉〉, tttype of anomaly〉〉 and ~〈type curve〉〉 on the one hand, and hydrogeological parameters such as discharge, alteration thickness, transmissivity and saturated level on the other. The results of this study have shown that the chances of having a positive borehole in Seno province are higher when the type of anomaly is TCC （80%）, shape of anomaly is ＂W＂ and when type curve is ＂H＂ （80%） for all geological formations. Granitic formations are those that record higher discharges while schists record high transmissivity values.展开更多
Maize being sub-tropical crop is sensitive to water deficit during the early growth stages;particularly clay-rich soil,due to the compaction of the soil.It is well-documented that potential sub-surface drip irrigation...Maize being sub-tropical crop is sensitive to water deficit during the early growth stages;particularly clay-rich soil,due to the compaction of the soil.It is well-documented that potential sub-surface drip irrigation(SDI)(Full irrigation;SDIFull(100%field capacity(FC)),Deficit irrigation;SDIDeficit(70%FC))improves water use efficiency,which leads to increased crop productivity;since it has a constraint that SDI excludes soil air around the root-zone during irrigation events,which alter the root function and crop performance.Additionally,in clay-rich soils,the root system of plants generally suffers the limitation of oxygen,particularly the temporal hypoxia,and occasionally from root anoxia;while SDI system accomplishes with the aerating stream of irrigation in the rhizosphere could provide oxygen root environment.The oxygen can be introduced into the irrigation stream of SDI through two ways:the venturi principle,or by using solutions of hydrogen peroxide through the air injection system.Therefore,the application of hydrogen peroxide(H_(2)O_(2);HP)can mitigate the adverse effect of soil compactness and also lead to improving the growth,yield and yield attributes of maize in clay-rich soil.Considering the burning issue,a field study was conducted in consecutive two seasons of 2017 and 2018;where hybrid maize was cultivated as a second crop,to evaluate the effect of liquid-injection of H_(2)O_(2)(HP)into the irrigation stream of SDI on the performance of maize in a clay-rich soil field of Adana,Turkey.When soil water content decreased in 50%of avail-able water,irrigation was performed.The amount of water applied to reach the soil water content to the field capacity is SDIFull(100%FC)and 70%FC of this water is SDIDeficit(70%FC).In the irrigation program,hydrogen peroxide(HP)was applied at intervals of 7 days on average according to available water with and without HP:SDIFull(100%FC)+0 ppm HP with full SDI irrigation;SDIFull(100%FC)+250 ppm HP with deficit SDI irrigation;SDIDeficit(70%FC)+0 ppm HP,SDIDeficit(70%FC)+250 ppm HP and SDIDeficit(70%FC)+500 ppm HP.Deficit irrigation(SDIDeficit(70%FC))program was started from tasseling stage and continued up to the physiological maturity stage with sub-soil drip irrigation.H_(2)O_(2) was applied 3 times during the growing season.Two years’results revealed that the liquid-injection of H_(2)O_(2) into the irrigation stream of SDI improved the growth and yield-related attributes and grain yield of maize.Based on the obtained results,during the extreme climatic condition in the year 2017,SDIFull(100%FC)+250 ppm HP was more effective than SDIFull(100%FC)+0 ppm HP on all traits for relative to full irrigation.While,during the favourable climatic condition in the 2018 season,SDIFull(100%FC)+250 ppm HP was more effective than full irrigation with SDIFull(100%FC)+0 ppm HP for the grain yield,grains,and SPAD value.Accordingly,the most effective treatment was SDIFull(100%FC)+250 ppm HP,as it gave the highest growth and yield-related attributes and grain yield of maize followed by SDIDeficit(70%FC)+250 ppm HP.Therefore,SDIFull with 250 ppm H_(2)O_(2) using as liquid-injection may be recommended to mitigate the adverse effect of soil compactness particularly water-deficit stress in clay-rich soil for the sustainability of maize production.展开更多
The manual design of addendum surfaces on common CAD platforms is very tedious which requires many trialscorrections,which will certainly a ect the construction e ciency and quality of addendum surfaces,and then a ect...The manual design of addendum surfaces on common CAD platforms is very tedious which requires many trialscorrections,which will certainly a ect the construction e ciency and quality of addendum surfaces,and then a ect the formability and quality of the workpiece in the process of sheet forming.In this paper,an automatic procedure based on parametric design method is proposed for the rapid construction of the addendum surfaces.The kernel of the parametric method is constructing boundary curves based on the shape of surfaces of workpiece and designing guide curves based on Hermite curve interpolation.By some simple parameters,the shape of the addendum surfaces could be controlled and adjusted easily.In addition,a minimum energy optimization method is employed to further optimize the constructed addendum surface.A finite element analysis for the sheet forming process is performed to evaluate the forming quality of constructed addendum surfaces.The instance illustrates that the addendum surface constructed by the proposed method could ensure both the overall smoothing of surfaces and the final forming quality,and it has a good e ect on springback after forming.This research proposes a smoothing parametric design method for addendum surfaces construction which could construct and optimize addendum surfaces rapidly.展开更多
CCl_3SO_2Br used as a 'telogen' reacts with CH_2=CF_2 to give mainly the 'mono- adduct' CCl_3CH_2CF_2Br, together with very small amouats of CCl_3CF_2CH_2Br, CCl_2BrCH_2CF_2Br and the 'di-adduct...CCl_3SO_2Br used as a 'telogen' reacts with CH_2=CF_2 to give mainly the 'mono- adduct' CCl_3CH_2CF_2Br, together with very small amouats of CCl_3CF_2CH_2Br, CCl_2BrCH_2CF_2Br and the 'di-adduct' CCl_3(CH_2CF_2)_2Br. The result indicates that CCl_3SO_2Br can be used as an addendum in trichloromethyl-bromo-addition reactions to olefins.展开更多
基金financially supported by the National Natural Science Foundation of China (51741908)
文摘Developing effective irrigation and drainage strategies to improve the quality of saline-alkali soil is vital for enhancing agricultural production and increasing economic returns. In this study, we explored how irrigation and drainage modes (flood irrigation, drip irrigation, and sub-surface pipe drainage under drip irrigation) improve the saline-alkali soil in Xinjiang, China. We aimed to study the transport characteristics of soil water and salt under different irrigation and drainage modes, and analyze the effects of the combination of irrigation and drainage on soil salt leaching, as well as its impacts on the growth of oil sunflower. Our results show that sub-surface pipe drainage under drip irrigation significantly reduced the soil salt content and soil water content at the 0–200 cm soil depth. Under sub-surface pipe drainage combined with drip irrigation, the mean soil salt content was reduced to below 10 g/kg after the second irrigation, and the soil salt content decreased as sub-surface pipe distance decreased. The mean soil salt content of flood irrigation exceeded 25 g/kg, and the mean soil desalination efficiency was 3.28%, which was lower than that of drip irrigation. The mean soil desalination rate under drip irrigation and sub-surface pipe drainage under drip irrigation was 19.30% and 58.12%, respectively. After sub-surface drainage regulation under drip irrigation, the germination percentage of oil sunflower seedlings was increased to more than 50%, which further confirmed that combined drip irrigation and sub-surface pipe drainage is very effective in improving the quality of saline-alkali soil and increasing the productivity of agricultural crops.
文摘The removal efficiency of Cu and Zn from swine wastewater was evaluated as effected by three variables: the hydraulic retention time (HRT) (24, 48, 72 and 96 hours), two different plant species (Typha domingensis Pers. and Eleocharis cellulosa) and two different sizes of filter media (5 and 15 mm) using a horizontal sub-surface flow constructed wetland. From the results, a significant difference was observed in the removal efficiency of Cu and Zn with respect to different hydraulic retention times. The best results were obtained in the HRT of 96 hours for Zn where 96% removal of Zn with Typha domingensis Pers. specie with gravel of 15 mm (experimental unit 6) was achieved. For Cu, at 72 hours of HRT, the efficiency was nearly 100% in five of the six study units (1, 2, 3, 5 and 6). In contrast, in experimental unit 4 with gravel of 15 mm and without plants, only 86% Cu removal was achieved.
基金the National Natural Science Foundation of China through Grants 40631006 and 40306005
文摘An Arctic Ocean eddy in sub-surface layer is analyzed in this paper by use of temperature, salinity and current profiles data obtained at an ice camp in the Canada Basin during the second Chinese Arctic Expedition in summer of 2003. In the vertical temperature section, the eddy shows itself as an isolated cold water block at depth of 60 m with a minimum temperature of - 1.5℃, about 0.5℃ colder than the ambient water. Isopycnals in the eddy form a pattern of convex, which indicates the eddy is anticyclonic. Although maximum velocity near 0.4 m s^-1 occurs in the current records observed synchronously, the current pattern is far away from a typical eddy. By further analysis, inertial frequency osci/lations with amplitudes comparable with the eddy velocity are found in the sub-surface layer currents. After filter the inertial current and mean current, an axisymmetric current pattern of an eddy with maximum velocity radius of 5 km is obtained. The analysis of the T-S characteristics of the eddy core water and its ambient waters supports the conclusion that the eddy was formed on the Chukchi Shelf and migrated northeastward into the northern Canada Basin.
文摘The aim of the present study is to improve the capabilities and precision of a recently introduced Sea Surface Acoustic Simulator(SSAS) developed based on optimization of the Helmholtz–Kirchhoff–Fresnel(HKF) method. The improved acoustic simulator, hereby known as the Modified SSAS(MSSAS), is capable of determining sound scattering from the sea surface and includes an extended Hall–Novarini model and optimized HKF method. The extended Hall–Novarini model is used for considering the effects of sub-surface bubbles over a wider range of radii of sub-surface bubbles compared to the previous SSAS version. Furthermore, MSSAS has the capability of making a three-dimensional simulation of scattered sound from the rough bubbly sea surface with less error than that of the Critical Sea Tests(CST) experiments. Also, it presents scattered pressure levels from the rough bubbly sea surface based on various incident angles of sound. Wind speed, frequency, incident angle, and pressure level of the sound source are considered as input data, and scattered pressure levels and scattering coefficients are provided. Finally, different parametric studies were conducted on wind speeds, frequencies, and incident angles to indicate that MSSAS is quite capable of simulating sound scattering from the rough bubbly sea surface, according to the scattering mechanisms determined by Ogden and Erskine. Therefore, it is concluded that MSSAS is valid for both scattering mechanisms and the transition region between them that are defined by Ogden and Erskine.
文摘This study aims at identifying possible correlations between shapes, types of geophysical anomalies and borehole productivity according to geological and hydrogeotogical contexts. The methodology adopted was a two-pronged one--the first step sought to： （1） interpret the electrical resistivity values from horizontal profiling and vertical electrical sounding implemented in Seno province that preceded the drilling of 513 boreholes; （ii） interpret data from pumping tests carried out on boreholes having a discharge superior to 1 m3/h （＂positive borehole＂） by using Cooper-Jacob＇s method. In the second step, according to geology, authors tried to identify possible correlations between each of the qualitative geophysical parameters： ~shape of anomaly〉〉, tttype of anomaly〉〉 and ~〈type curve〉〉 on the one hand, and hydrogeological parameters such as discharge, alteration thickness, transmissivity and saturated level on the other. The results of this study have shown that the chances of having a positive borehole in Seno province are higher when the type of anomaly is TCC （80%）, shape of anomaly is ＂W＂ and when type curve is ＂H＂ （80%） for all geological formations. Granitic formations are those that record higher discharges while schists record high transmissivity values.
基金This publication was supported by Award Number(BAP,FÖA-2016-6152)from the Research Foundation of the Cukurova University,Adana,Turkey and Principal Investigator,Prof.Dr.Alhan Sariyev“https://bap.cu.edu.tr/.”
文摘Maize being sub-tropical crop is sensitive to water deficit during the early growth stages;particularly clay-rich soil,due to the compaction of the soil.It is well-documented that potential sub-surface drip irrigation(SDI)(Full irrigation;SDIFull(100%field capacity(FC)),Deficit irrigation;SDIDeficit(70%FC))improves water use efficiency,which leads to increased crop productivity;since it has a constraint that SDI excludes soil air around the root-zone during irrigation events,which alter the root function and crop performance.Additionally,in clay-rich soils,the root system of plants generally suffers the limitation of oxygen,particularly the temporal hypoxia,and occasionally from root anoxia;while SDI system accomplishes with the aerating stream of irrigation in the rhizosphere could provide oxygen root environment.The oxygen can be introduced into the irrigation stream of SDI through two ways:the venturi principle,or by using solutions of hydrogen peroxide through the air injection system.Therefore,the application of hydrogen peroxide(H_(2)O_(2);HP)can mitigate the adverse effect of soil compactness and also lead to improving the growth,yield and yield attributes of maize in clay-rich soil.Considering the burning issue,a field study was conducted in consecutive two seasons of 2017 and 2018;where hybrid maize was cultivated as a second crop,to evaluate the effect of liquid-injection of H_(2)O_(2)(HP)into the irrigation stream of SDI on the performance of maize in a clay-rich soil field of Adana,Turkey.When soil water content decreased in 50%of avail-able water,irrigation was performed.The amount of water applied to reach the soil water content to the field capacity is SDIFull(100%FC)and 70%FC of this water is SDIDeficit(70%FC).In the irrigation program,hydrogen peroxide(HP)was applied at intervals of 7 days on average according to available water with and without HP:SDIFull(100%FC)+0 ppm HP with full SDI irrigation;SDIFull(100%FC)+250 ppm HP with deficit SDI irrigation;SDIDeficit(70%FC)+0 ppm HP,SDIDeficit(70%FC)+250 ppm HP and SDIDeficit(70%FC)+500 ppm HP.Deficit irrigation(SDIDeficit(70%FC))program was started from tasseling stage and continued up to the physiological maturity stage with sub-soil drip irrigation.H_(2)O_(2) was applied 3 times during the growing season.Two years’results revealed that the liquid-injection of H_(2)O_(2) into the irrigation stream of SDI improved the growth and yield-related attributes and grain yield of maize.Based on the obtained results,during the extreme climatic condition in the year 2017,SDIFull(100%FC)+250 ppm HP was more effective than SDIFull(100%FC)+0 ppm HP on all traits for relative to full irrigation.While,during the favourable climatic condition in the 2018 season,SDIFull(100%FC)+250 ppm HP was more effective than full irrigation with SDIFull(100%FC)+0 ppm HP for the grain yield,grains,and SPAD value.Accordingly,the most effective treatment was SDIFull(100%FC)+250 ppm HP,as it gave the highest growth and yield-related attributes and grain yield of maize followed by SDIDeficit(70%FC)+250 ppm HP.Therefore,SDIFull with 250 ppm H_(2)O_(2) using as liquid-injection may be recommended to mitigate the adverse effect of soil compactness particularly water-deficit stress in clay-rich soil for the sustainability of maize production.
基金Supported by National Natural Science Foundation of China(Grant No.61471024)National Natural Science Foundation for Young Scientists of China(Grant No.51705469).
文摘The manual design of addendum surfaces on common CAD platforms is very tedious which requires many trialscorrections,which will certainly a ect the construction e ciency and quality of addendum surfaces,and then a ect the formability and quality of the workpiece in the process of sheet forming.In this paper,an automatic procedure based on parametric design method is proposed for the rapid construction of the addendum surfaces.The kernel of the parametric method is constructing boundary curves based on the shape of surfaces of workpiece and designing guide curves based on Hermite curve interpolation.By some simple parameters,the shape of the addendum surfaces could be controlled and adjusted easily.In addition,a minimum energy optimization method is employed to further optimize the constructed addendum surface.A finite element analysis for the sheet forming process is performed to evaluate the forming quality of constructed addendum surfaces.The instance illustrates that the addendum surface constructed by the proposed method could ensure both the overall smoothing of surfaces and the final forming quality,and it has a good e ect on springback after forming.This research proposes a smoothing parametric design method for addendum surfaces construction which could construct and optimize addendum surfaces rapidly.
文摘CCl_3SO_2Br used as a 'telogen' reacts with CH_2=CF_2 to give mainly the 'mono- adduct' CCl_3CH_2CF_2Br, together with very small amouats of CCl_3CF_2CH_2Br, CCl_2BrCH_2CF_2Br and the 'di-adduct' CCl_3(CH_2CF_2)_2Br. The result indicates that CCl_3SO_2Br can be used as an addendum in trichloromethyl-bromo-addition reactions to olefins.
