Ligand Size Effect on PdLn Oxidative Addition with Aryl Bromide： A DFT Study

The process and mechanism of the ligand volume controlled Pd（PR3）2 （PR3=PH3, PMe3, and PtBu3） oxidative addition with aryl bromide were investigated, using density functional theory method with the conductor-like screening model. Association pathway and dissocia-tion pathway were investigated by the comparison of several energies. The cleavage energy of Pd（PR3）2 complex was calculated, as well as the oxidative addition reaction barrier energy of Pd（PR3）n （n=1,2） with aryl bromide in N,N-dimethylformamide solvent. This study proved that the ligands volume possessed a great impact on the mechanism of oxidative addition： less bulky ligand palladium associated with aryl bromide via two donor ligands,but larger bulky ligand palladium coordinated via monoligand.

Effects of Ta Addition on NiTi Shape Memory Alloys

The effect of Ta addition on the martensitic transformation characteristics and the X-ray visibility on NiTi shape memory alloy have been studied in (Ni51Ti49)1-xTax system. It was found that the transformation temperatures of the Ni51Ti49 binary alloy increased drastically by an addition of 0～4 at. pet Ta, but only slightly when the concentration exceeded 4 at. pct; the addition of Ta greatly decreases the sensitivity of the martensitic transformations to the variation in the Ni-Ti ratio. The addition of Ta to the NiTi binary alloy can improve its X-ray visibility.

Effects of Additional Elements on Microstructure and Precipitation Behaviour in Rapidly Solidified Al-Ti Base Alloys

Rapidly solidified Al-Ti base alloys were prepared by melt spinning at the cooling rate about 107 K/s. The melt-spun ribbons were used to observe the dricrostructures after heat treatment.In the supersaturated Al-Tl-Si alloy, age hardening occurred after 1 h anneal in the temperature range of 4000~500℃, which seems to be attributed to the precipitation of metastable Ll2- (Al,Si)3Ti phase. However. the microhardness was relatively low because of the low v/o and the insufflcient stability of precipitates. Thus. Cr was added to Al-Ti-Si alloys in order to stabilize the microstructures and to increase the v/o of precipitate5. As a result. the alIoys containing Cr were evaluated to possess the improved properties at the service temperature.

Effect of Respective Additions of Ga, Zr and Combined Additions of Co, Ga, Zr on Magnetic Properties of Remanence-enhanced Nd_(8.4) Fe_(87.1) B_(4.5) Alloy

The effect of a partial substitution of Zr, Ga; Co and Ga; Co. Ga and Zr; respectively, for Fe on the structure and magnetic properties of Nd_8.4Fe_87.1B_4.5 alloy prepared by mechanical alloying has been studied in detail. It has been shown that, intrinsic coercivity μ0 H_c and maximum magnetic energy product (BH)_max increase for only Zr or Ga-containing samples, which is mainly due to the refinement of soft grains. The combined addition of Co and Ga is less effective for improving μoH_c and (BH)_max than the respective addition of Co or Ga. which may be due to the formation of CsCl-type CoGa. μoH_c and (BH)_max for combined Co, Ga. Zr-added alloy are higher than those for the combined Co, Ga-added alloy but lower than those for only Zr-containing alloy.

Effects of Ta Addition on Microstructure and Transformation Behavior of Ni-Ti Alloys

The effect of adding Ta on the changes of microstructure and Ms temperature of a dualphase shape memory alloy with compositions of (Ni51 Ti49)1 -x.Tax. and Ni50-Ti50 -g.Ta.g were systematically studied. An optical microscope, SEM, X-ray diffraction and DSC were utilized in this work. The evolution of the microstructure as a function of Ta content was characterized. The variation of the Ni/Ti ratio in the NiTi phase plays an important role in the change of the Ms temperatures due to the addition of Ta. A pseudobinary NiTi-Ta phase diagram was proposed based on these results.

Effect of Al Addition on the Glass-Forming Ability and Magnetic Properties of a Gd-Co Binary Amorphous Alloy

The glass-forming ability （CFA） and magnetic properties of the Cd50 Co50-based amorphous alloy with AI addition substitution for Co are investigated. It is found that the CFA and magneto-caloric effect of the Gd50Co45Al5 amorphous alloy are better than Cd50Co50 amorphous alloy. The maximum magnetic entropy change （-△ Sm^peak） and the magnetic refrigerant capacity- of the amorphous alloy under a field of 5 T are about 6.64 J·kg^-1 K^-1 and 764 J·kg^-1, respectively. The field dependence of magnetic entropy change meets the one predicted by the mean field theory, which is investigated for a better understanding of the magneto-caloric behaviors of the Gdso Co45Al5 amorphous alloy.

Effects of A1 Additions on Microstructure and Mechanical Properties of MoSi_2

The effects of Al additions on the microstructure and mechanical properties of MoSi2 have been studied. With the A1 additions from 2.5 wt pct to 5 wt pct, the siliceous grain boundary phase in hot pressed samples was eliminated because of the formation of Al2O3 particles. It was shown that Al and SiO2 reacted at 860℃. During the reaction, A1 atoms were mainly transferred to Al2O3 particles, and to some extent, diffused into MoSi2 grains. Both the toughness and strength of Al containing composites exceeded those of pure MoSi2 material. Bending strength and fracture toughness reach the highest value of 350 MPa, 4.05 MPa.m1/2, respectively, at ambient temperature when Al addition was of 3.5 wt pct.

Effect of Li and Ti Additions on Lα(Al)+Mg_2Si Pseudobinary Eutectic Reaction

Effect of Li and Ti additions on Lα(AI)+Mg2Si pseudobinary eutectic reaction in ternary Al-Mg-Si system has been investigated by thermoanalysis, directional solidification and metallographic techniques in this study. It has been found that Li addition causes decreasing of the volume fraction of Mg2Si, while a little amount of Ti causes to increasing, which is of a great importance to the adjustment of phase constitution and alloy properties. Doping components have little influence on the eutectic temperature.

Additive mixed models to study the effect of tree age and climatic factors on stem radial growth of Eucalyptus trees

The effect of tree age and climatic variables on stem radial growth of two hybrid clones of Eucalyptus was determined using longitudinal data from eastern South Africa.The stem radius of was measured weekly as the response variable.In addition to tree age,average weekly temperature,solar radiation,relative humidity and wind speed were simultaneously recorded with total rainfall at the site.An additive mixed effects model that incorporates a non-parametric smooth function was used.The results of the analysis indicate that the relationship between stem radius and each of the covariates can be explained by nonlinear functions.Models that account for the effect of clone and season together with their interaction in the parametric part of the additive mixed model were also fitted.The interaction between clone and season was not significant in all cases.For analyzing the joint effect all the covariates,additive mixed models that included two or more covariates were fitted.A significant effect of tree age was found in all cases.Although tree age was the key determinant of stem radial growth,weather variables also had a significant effect that was dependent on season.

Genetic Effect on Yield and Fiber Quality Traits of 16 Chromosome Substitution Lines in Upland Cotton

Evaluation of the genetic effect on yield and fiber quality can provide useful information on cotton breeding. Sixteen CSB lines and TM-1 introduced from USDA/ARS were used as male and top-crossed with three elite cultivars and the 51 F1 hybrids, 16 CSB lines, TM-1, and 3 elite cultivars were planted at the Cotton Research Institute of CAAS, Anyang, Henan Province and Xiajin, Shandong Province, China. The yield traits and fiber quality data were obtained and additive and dominance effect on each trait were measured by AD model. Boll weight takes the largest additive proration, whereas boll number takes the least additive proration. The largest and the least dominant proration for lint yield and boll weight were measured, respectively. Fiber length has the additive and dominance effect, and dominance effect was slightly more than additive effect. Larger additive and no dominance effect on uniformity, micronaire, and fiber strength were measured. Significantly, positive additive effect on boll weight of CSB06 and CSB12Sh was observed. CSB14Sh and CSB01 have significantly positive additive effect on 4 and 3 traits of fiber quality, respectively. CSB01 has the greatest dominant effect on lint yield among CSB lines. The dominant effect on fiber length of CSB lines showed positive. It is beneficial to use CSB06 and CSB12Sh as parents to improve boll size, to use CSB14Sh and CSB01 as parents to improve fiber quality. As for hybrid cotton breeding, it is reasonable using CSB01 to improve lint yield traits, and using CSB01, CSB11Sh, and CSB06 to improve fiber length.

Path analysis and estimation of additive and epistatic gene effects of barley SSD lines

In the paper presented, 99 single seed descent barley lines as well as their parental forms Roland and Apex were studied. The grain weight components and their interrelations were analyzed using simple coefficients of correlation. The direct and indirect effects of such components on grain weight per plant and 1 000-grain weight were estimated using path analysis. In the 2006 and 2007, the spike length and number of spikelets per spike were the determinants of grain weight. Genetic parameters as additive and epistasis effects were estimated for all studied traits. The results indicate the importance of both additive and epistasis gene effects of number of spikes per plant, grain weight per spike, grain number per plant and grain weight per plant in this study.

Antioxidant and Immunopotentiating Effects of <i>Cordyceps </i>Mycelium Extract, Chicken Essence, and Their Combination in Experimental Models

Cordyceps mycelium extract (Cs-4), Chicken Essence (CE), and their combination were investigated for antioxidant and immunomodulatory activities in mouse models. Long-term treatment with Cs-4 or CE at equivalent human doses improved antioxidant status in various tissues, as evidenced by the enhancement of mitochondrial glutathione redox status in the brain, liver, heart, and kidney of mice. Cs-4 or CE treatment also produced an immunomodulatory action, as indicated by the potentiation of Concanavalin A-/lipopolysaccharide-induced proliferation of mouse splenocytes ex vivo. While doubling of the equivalent human doses of Cs-4 and CE did not further enhance their antioxidant or immunopotentiating effects, the combined treatment with Cs-4 and CE at their respective equivalent human doses produced an additive effect, with the extents of stimulation being larger than those produced by Cs-4 or CE alone. The results have demonstrated for the first time that the combined use of Cs-4 and CE can produce an additive effect on both antioxidation and immunopotentiation that cannot otherwise be achieved by increasing the equivalent human doses of Cs-4 or CE alone.

The Effect and Mechanism of Nano-Cu Lubricating Additives on the Electroless Deposited Ni-W-P Coating

The coating and deposition process with excellent anti wear and suitable for industrial application were developed, and the optimum bath composition and process were obtained by studying the influence of the bath composition, temperature and pH value on the deposition rate and the plating solution stability. Moreover, the tribological properties of nano-Cu lubricating additives and electroless deposited Ni-W-P coating as well as their synergistic effect are researched using ring-block abrasion testing machine and energy dispersive spectrometer. Research results show that Ni-W-P alloy coating and nano-Cu lubricating additive have excellent synergistic effect, e g, the wear resistance of Ni-W-P alloy coating （with heat treatment and the oil with nano-Cu additives） has increased hundreds times than 45 steel as the metal substrate with the basic oil, and zero wear is achieved, which breaks through the bottleneck of previous separate research of the above-mentioned two aspects.

Effects of Thermal Annealing on the Solvent Additive P3HT PC61BM Bulk Heterojunction Solar Cells

Effects of thermal annealing on the optical, electrical and structural properties of 3 vol% 1,8-diiodoctane added P3HT：PC61BM active layers are investigated, concerning the performance of the bulk heterojunction polymer so- lar cells by changing the heat temperature. The structure information of the active layer is analyzed by using the grazing incidence wide angle scattering diffraction combined with the optical microscope, light absorption, pho- toluminescence and the external quantum efficiency spectra. The relationship between the detail of morphology and the optical, electrical properties is investigated.

考虑二氧化硫排放的清洁发展机制协同效应分析

为了解清洁发展机制(CDM)项目在电力行业的协同效应,建立了二氧化硫排放量的参数估计方程,引入profile-kernel估计方法估计参数,并以中国实际CDM项目为例,评估了CDM项目的二氧化硫排放的协同效应,进一步识别和判断了CDM项目的额外性。研究发现,碳排放信用额的参数估计为负值,可见CDM项目确实能减少二氧化硫排放,但参数估计值较小,表明CDM项目在减少二氧化硫排放方面的效应并不十分显著,这也对其额外性带来了一定的挑战,意味着即使无CDM项目资金的支持,项目仍会发生。

组合式负荷传感器旋转效应的研究

针对寄生分量会引起非完全轴对称结构的负荷传感器发生旋转效应,采用有限元模拟和试验分析,研究了有、无均力结构的组合式负荷传感器在不同寄生分量下力传感器所受附加侧向力的变化规律与旋转效应的关系.研究结果表明:均力结构能使组合式负荷传感器的力传感器所受附加侧向力明显下降并趋于平均,从而有效地降低了旋转效应;力传感器所受附加侧向力的波动量可用于预测同一试验力级下组合式负荷传感器旋转效应的大小,为提高测量准确度提供评定依据;试验数据验证了有限元模型的可靠性.

国际清洁发展机制制度设计的法学思考

《京都议定书》给清洁发展机制设定了两项基本原则,即额外性原则和可持续原则。该机制实施十年来,产生了广泛积极的影响,其制度设计的瑕疵也逐渐显现,表现在项目的"额外性"是基于虚拟情景,温室气体减排的客观真实性难以核实;可持续原则实施中的"反向激励"偏差导致对可再生能源项目的"挤出效应",项目地区分布不平衡;交易程序冗长复杂,交易成本过高;环境友好技术转移不畅。我国应注意平衡贸易与环境的关系,维护国家当前与长远利益,积极参与制定新的国际贸易与环境游戏规则。

Genetic Analysis of Earliness Traits in Short Season Cotton (Gossypium hirsutum L.)

Inheritance and interrelationship of phenotype and genotype of earliness traits were evaluated in a diallel analysis involving six early-maturing parents. Date of first square （DFS）, date of first flower （DFF）, date of first open boll （DFOB）, number of node first sympodial branch （NNFSB）, and harvested rate before frost （HRBF） as earliness traits of six parents, 15 F1 hybrids and 15 F2 progenies were investigated from 2005 to 2008. The experiment design was a randomized complete block design with three replications. Additive, dominance and epistasis effects were analyzed with ADAA （additive- dominance-epistasis） model. HRBF, DFF, and DFOB showed significant additive genetic variances. Heritability estimates ranged from 0.088 （HN, narrow sense） and 0.416 （HNE, environment interaction） for HRBF, to 0.103 （HN） and 0.524 （HNE） for DFF, and to 0.187 （HN） and 0.519 （H~） for DFOB. Dominance genetic effects for DFS, DFF, DFOB, and NNSFB were stronger than additive effects. Additive-by-additive epistatic effects for DFS, DFOB, and NNSFB were detected and affected by environment. Correlation analysis showed generally that HRBF had a significant negative genetic and phenotypic correlation with DFS, DFOB, and NNFSB; DFS had significant positive genetic and phenotypic correlations with DFF, DFOB, and NNFSB; significant positive genetic and phenotypic correlations were also detected between DFF and DFOB, DFF and NNFSB, DFOB and NNFSB. The results showed that the lower the node to the first fruiting branch and the shorter the plant, the earlier was the onset of squaring, flowering, and boll opening, the higher was the harvest rate before frost. Heredity of earliness traits among parents and their hybrids were also detected and parents A1, A2, Bl, B2, and B3 could be used to improve earliness traits of short season cotton cultivars.

One compound approach combining factor-analytic model with AMMI and GGE biplot to improve multi-environment trials analysis

To improve multi-environmental trial(MET)analysis,a compound method—which combines factor analytic(FA)model with additive main effect and multiplicative interaction(AMMI)and genotype main effect plus genotype-by-environment interaction(GGE)biplot—was conducted in this study.The diameter at breast height of 36 open-pollinated(OP)families of Pinus taeda at six sites in South China was used as a raw dataset.The best linear unbiased prediction(BLUP)data of all individual trees in each site was obtained by fitting the spatial effects with the FA method from raw data.The raw data and BLUP data were analyzed and compared by using the AMMI and GGE biplot.BLUP results showed that the six sites were heterogeneous and spatial variation could be effectively fitted by spatial analysis with the FA method.AMMI analysis identified that two datasets had highly significant effects on the site,family,and their interactions,while BLUP data had a smaller residual error,but higher variation explaining ability and more credible stability than raw data.GGE biplot results revealed that raw data and BLUP data had different results in mega-environment delineation,test-environment evaluation,and genotype evaluation.In addition,BLUP data results were more reasonable due to the stronger analytical ability of the first two principal components.Our study suggests that the compound method combing the FA method with the AMMI and GGE biplot could improve the analysis result of MET data in Pinus teada as it was more reliable than direct AMMI and GGE biplot analysis on raw data.

Detection and Analysis of High Temperature Sensitivity of TGMS Lines in Rice Using AMMI Model

With the AMMI (additive main effects and multiplicative interaction) analysis model, thedetermination of the sensitivity to temperature among different TGMS (thermo-sensitivegenic male sterile) lines was performed. To assess the genetic differences due to hightemperature stress at the fertility-sensitive stage (10-20d before heading), sevengenotypes (six TGMS lines and the control Pei-Ai64S) were grown from May 4 at sevendifferent stages with 10d intervals. The temperatures at the fertility-sensitive stagesinvolved twelve levels from<20 to>℃ under the regime natural conditions in Hangzhou,China. There was considerable variation in pollen fertility among genotypes in responseto high temperature. Five genotypes identified as TGMS lines as their percentages offertile pollens were lower than or close to that of the control except for the unstableline RTS19 (V6). When the temperatures at the fertility-sensitive stage were at Ⅰ-Ⅳ,Ⅴ-Ⅵ and Ⅶ-Ⅻ, the percentages of fertile pollens varied in the ranges of 46.46-48.49%,19.62-22.79% and 3.49-5.87%, respectively. The critical temperatures of sterility andfertility in the five TGMS lines were 25.1 and 23.0℃, respectively. Considering theamounts and directions of main effect and their IPCA (interaction principal componentsanalysis), we can classify the lines and temperature levels into different groups, anddescribe the characteristics of genotypetemperature interaction, offering the informationand tools for the development and utility of thermo-sensitive male sterile lines.Several TGMS rice lines with their reproductive sensitivity to high temperature that canbe screened using the AMMI model may add valuable germplasm to the breeding program ofhybrid rice.