Complementary Pass-Transistor Adiabatic Logic Circuit Using Three-Phase Power Supply

A new low power quasi adiabatic logic,complementary pass transistor adiabatic logic (CPAL),is presented.The CPAL circuit is driven by a new three phase power clock,and its non adiabatic loss on output loads can be effectively reduced by using complementary pass transistor logic and transmission gates.Furthermore,the minimization of the energy consumption can be obtained by choosing the optimal size of bootstrapped nMOS transistors,thus it has more efficient energy transfer and recovery.A three phase power supply generator with a small control logic circuit and a single inductor is proposed.An 8 bit adder based on CPAL is designed and verified.With MOSIS 0 25μm CMOS technology,the CPAL adder consumes only 35% of the dissipated energy of a 2N 2N2P adder and is about 50% of the dissipated energy of a PFAL adder for clock rates ranging from 50 to 200MHz.

DESIGN OF TWO-PHASE SINUSOIDAL POWER CLOCK AND CLOCKED TRANSMISSION GATE ADIABATIC LOGIC CIRCUIT

First the research is conducted on the design of the two-phase sinusoidal power clock generator in this paper. Then the design of the new adiabatic logic circuit adopting the two-phase sinusoidal power clocks--Clocked Transmission Gate Adiabatic Logic （CTGAL） circuit is presented. This circuit makes use of the clocked transmission gates to sample the input signals, then the output loads are charged and discharged in a fully adiabatic manner by using bootstrapped N-Channel Metal Oxide Semiconductor （NMOS） and Complementary Metal Oxide Semiconductor （CMOS） latch structure. Finally, with the parameters of Taiwan Semiconductor Manufacturing Company （TSMC） 0.25um CMOS device, the transient energy consumption of CTGAL, Bootstrap Charge-Recovery Logic （BCRL） and Pass-transistor Adiabatic Logic （PAL） including their clock generators is simulated. The simulation result indicates that CTGAL circuit has the characteristic of remarkably low energy consumption.

Quasi-Static Energy Recovery Logic with Single Power-Clock Supply

This paper presents a new quasi-static single-phase energy recovery logic （QSSERL）, which unlike any other existing adiabatic logic family,uses a single sinusoidal supply-clock without additional timing control volta- ges. This not only ensures lower energy dissipation, but also simplifies the clock design, which would be otherwise more complicated due to the signal synchronization requirement. It is demonstrated that QSSERL circuits operate as fast as conventional two-phase energy recovery logic counterparts. Simulation with an 8bit logarithmic look- ahead adder （LLA） using static CMOS,clocked CMOS adiabatic logic （CAL,an existing typical single-phase ener- gy recovery logic）,and QSSERL,under 128 randomly generated input vectors,shows that the power consumption of the QSSERL adder is only 45% of that of the conventional static CMOS counterpart at 10MHz, and the QS- SERL adder achieves better energy efficiency than CAL when the input frequency finput is larger than 2MHz.

DESIGN OF TERNARY COUNTER BASED ON ADIABATIC DOMINO CIRCUIT

By researching the ternary counter and low power circuit design method, a novel design of low power ternary Domino counter on switch-level is proposed. Firstly, the switch-level structure expression of ternary loop operation circuit with enable pin is derived according to the switch-signal theory, and the one bit ternary counter is obtained combining the ternary adiabatic Domino literal operation circuit and buffer. Then the switch-level structure expression of enable signal circuit is derived, and the four bits ternary counter is obtained by cascade connection. Finally, the circuit is simulated by Spice tool and the output waveforms transform in proper order indicating that the logic function is correct. The energy consumption of the four bits ternary adiabatic Domino counter is 63% less than the conventional Domino counterpart.

Scaling trends in energy recovery logic:an analytical approach

This paper presents an analytical model to study the scaling trends in energy recovery logic.The energy performance of conventional CMOS and energy recovery logic are compared with scaling the design and technology parameters such as supply voltage,device threshold voltage and gate oxide thickness.The proposed analytical model is validated with simulation results at 90 nm and 65 nm CMOS technology nodes and predicts the scaling behavior accurately that help us to design an energy-efficient CMOS digital circuit design at the nanoscale.This research work shows the adiabatic switching as an ultra-low-power circuit technique for sub-100 nm digital CMOS circuit applications.

Design of ternary low-power Domino JKL flip-flop and its application

By researching the ternary flip-tlop and the adiabatic Domino circuit,a novel design of low-power ternary Domino JKL flip-flop on the switch level is proposed.First,the switch-level structure of the ternary adiabatic Domino JKL flip-flop is derived according to the switch-signal theory and its truth table.Then the ternary loop operation circuit and ternary reverse loop operation circuit are achieved by employing the ternary JKL tlip-tlop. Finally,the circuit is simulated by using the Spice tool and the results show that the logic function is correct. The energy consumption of the ternary adiabatic Domino JKL flip-flop is 69%less than its conventional Domino counterpart.