Influence of the Moho surface distribution on the oil and gas basins in China seas and adjacent areas

Owing to the strategic significance of national oil and gas resources,their exploration and production must be prioritized in China.Oil and gas resources are closely related to deep crustal structures,and Moho characteristics influence oil and gas distribution.Therefore,it is important to study the relationship between the variation of the Moho surface depth undulation and hydrocarbon basins for the future prediction of their locations.The Moho depth in the study area can be inverted using the Moho depth control information,the Moho gravity anomaly,and the variable density distribution calculated by the infinite plate.Based on these results,the influences of Moho characteristics on petroleum basins were studied.We found that the Moho surface depth undulation deviation and crustal thickness undulation deviation in the hydrocarbon-rich basins are large,and the horizontal gradient deviation of the Moho surface shows a positive linear relationship with oil and gas resources in the basin.The oil-bearing mechanism of the Moho basin is further discussed herein.The Moho uplift area and the slope zone correspond to the distribution of oil and gas fields.The tensile stress produced by the Moho uplift can form tensile fractures or cause tensile fractures on the surface,further developing into a fault or depression basin that receives deposits.The organic matter can become oil and natural gas under suitable chemical and structural conditions.Under the action of groundwater or other dynamic forces,oil and natural gas are gradually transported to the uplift or the buried hill in the depression zone,and oil and gas fields are formed under the condition of good caprock.The research results can provide new insights into the relationship between deep structures and oil and gas basins as well as assist in the strategic planning of oil and gas exploration activities.

Characteristics of gravity anomalies and tectonic analysis of Enderby Land in East Antarctica and its adjacent areas

Enderby Land in East Antarctica and its adjacent areas,which are closely related to the Indian Plate in their geological evolution,have become one of the key zones for studies on how the Antarctic continent evolves.Based on the isostasy and flexure theories of the lithosphere and using the CRUST1.0 model as the depth constraint,this paper uses the gravity field model EIGEN-6C4 and topographic data to calculate the isostatic gravity anomalies of Enderby Land and its adjacent areas.Then,the crustal thickness of the study area is calculated,and three comprehensive geophysical interpretation profiles that vertically span the study area are plotted.The results show that the flexural isostatic gravity anomalies in Enderby Land and its adjacent areas are closely related to the regional tectonic setting,and the anomalies in different regions differ substantially,ranging from−50×10^(−5)m/s^(2)to 85×10^(−5)m/s^(2).A zone of high isostatic gravity anomalies(30×10^(−5)−80×10^(−5)m/s^(2))is distributed outside the Cooperation Sea and Queen Maud Land,which may be plate remnants generated by early rifting.Except for the Kerguelen Plateau,which was formed by a hotspot and has a crustal thickness of 15 km,the thickness of the oceanic crust in other parts of the study area changes slightly by approximately 4–9 km,with the thinnest part being in Enderby Basin.The thickness of the inland crust along the coastline increases with the elevation,with the maximum thickness reaching 34 km.The isostatic gravity anomalies corresponding to the zone of high magnetic anomalies along the continental margin of Queen Maud Land are negative and small,with an isostatic adjustment trend indicating Moho surface uplift,and those on the edge of central Enderby Land are near zero,approaching the isostatic state,which may be caused by the magmatism at the early stage of rifting.The continental-oceanic boundary should be close to the contour line of the crustal thickness 10–12 km on the outer edge of the coastline.

Late Paleozoic Sequence-Stratigraphic Frameworks and Sea Level Changes in Dianqiangui Basin and Its Adjacent Areas with Systematic Revision of Regional Unconformities

The formation process of the Dianqiangui basin, a special basin, occurred after the Caledonian orogeny, in the south of Guizhou, the west of Guangxi and the southeast of Yunnan, experienced three periods: it began in the Devonian, persisted in the Carboniferous, and became fiercer in the Permian. Controlled by syndepositional fault-zones, varieties of isolated carbonate platforms, large and small, were developed in the background of a deep-water basin, namely, an inter-platform ditch. And a special paleogeographical Late Paleozoic pattern marked by “platform-basin-hill-trough” was produced in both the Dianqiangui basin and its adjacent areas. Affected by regional tectonic activities and the global changes in the sea level, the platform carbonates and coal measures superimposed each other cyclically on the attached platform. The reef-building on the isolated platform and the margin of the attached platform corresponds to the development of the shale succession in the deep-water basin. All of these elementary characteristics reflect a regular and sophisticated filling succession of the Dianqiangui basin, a result of the dual controls of the regionally tectonic activities and the eustacy. Based on the two elementary features of the third-order sequences, i.e. the regularity of sedimentary-facies succession in space and the simultaneity of environmental changes in time, 25 third-order sequences could be discerned in the Upper Paleozoic strata in the Dianqiangui basin and its adjacent areas. On the basis of the two kinds of facies-changing surfaces and the two kinds of diachronisms in stratigraphic records, the regional Late Paleozoic sequence-stratigraphic framework in the Dianqiangui basin and its adjacent areas can be established. There are two types of facies-changing surfaces and two types of diachronisms in stratigraphic records: the static type, a result of the change in sedimentary facies in space, and the dynamic type, a result of the change in time. These two types of facies-changing surfaces led to the generation of the two types of diachronisms: the diachronism of facies-changing surfaces that was formed by the static facies-changing surfaces, and the diachronism of punctuated surfaces that was formed by the dynamic facies-changing surfaces. The two types of facies-changing surfaces and the two types of diachronisms in stratigraphic records are the key to the establishment of the sequence-stratigraphic framework. The sequence boundaries could be divided geologically into four types: tectonic unconformity, sedimentary unconformity, drowned unconformity and their correlative surfaces. All of these four types can be further grouped into exposed punctuated surfaces and deepened punctuated surfaces. The tectonic unconformity is similar to Type Ⅰ sequence boundary, and the sedimentary unconformity is similar to Type Ⅱ sequence boundary defined by Vail et al.. In terms of sequence stratigraphy, the tectonic unconformities of the Ziyun movement, the Qiangui epeirogeny and the Dongwu revolution as well as the drowned unconformity in the transitional period from the Permian to the Triassic can be systematically defined and their geological characteristics are briefly presented.

Coupling characteristics of stress and strain at different layers of different sub-regions in Yunnan and its adjacent areas

In this paper, we collect 6 361 waveform data to calculate the shear wave splitting parameters from a regional seismic network of 22 digital stations in Yunnan and its adjacent area from July 1999 to June 2005. By using the cross-correlation method, 64 splitting events of 16 stations are processed. We also collect the splitting results of eight earthquake sequences to present the characteristics of shear wave splitting in Yunnan and its adjacent areas. The orientations of maximum principal compressive stress of three sub-regions in this area are derived from the CMT focal mechanism solutions of 43 moderate-strong earthquakes provided by Harvard University by the P axis azimuth-averaging method. The principal strain rate at each observatory is deduced from the observations of Crustal Movement Observation Network of China during the period from 1999 to 2004. In addition, the data of Pn aniso- tropy and SKS splitting of Yunnan and its adjacent areas are also collected. We have discovered from this study that the continental lithosphere, as a main seismogenic environment for strong earthquake, can be divided into blocks laterally; the mechanical behavior of lithosphere varies with depth and can be divided into different layers in the vertical orientation; the information of crustal deformation obtained from GPS might be affected by the type of blocks, since there are different types of active blocks in Yunnan and its adjacent areas; the shear wave splitting in this region might be affected mainly by the upper crust or even the surface tectonics.

3-D velocity structure of P wave in the upper mantle beneath southwestern China and its adjacent areas

3-D velocity structure of P wave in the upper mantle beneath southwestern China and its adjacent areas (10°N [similar to] 36°N, 70°E [similar to] 110°E) down to the depth of 400 km has been studied by using 80 974 P-wave first arrival times recorded at 165 stations from 7 053 events both within the studying areas, selected from the ISC bulletin and the Bulletin of China and NEIC fundamental seismic network. With a resolution of grid spacing of 2°×2°, the velocity heterogeneity on the horizontal profile is obvious though it attenuates with the depth increasing. On the vertical profiles of velocity along the latitude of 16°N and 24°N, the collision and extrusion of India plate to Eurasia plate is displayed, and a remarkable velocity difference between India plate and Eurasia plate is shown. In the vertical profile along the longitude of 90°E, the subducting of India plate northward beneath Eurasia plate (Tibet plateau) is also obvious. On the horizontal profile at the depth of 90 km, a slow velocity stripe from Myitkyina, Myanmar to Donghai, Vietnam seems to be related to Honghe fault belt. An illustration method of describing the resolution more directly and exactly has been proposed and utilized in this paper.

DECOLLEMENT STRUCTURE AND METALLOGENIC PROGNOSIS FOR BURIED URANIUM DEPOSITS OF EAST HUNAN AND ITS ADJACENT AREA,CHINA

East Hunan and its adjacent area is defined as an intraplate orogenic zone with help of new theory of geology and multi-discipline research. The evolutionary stages, deep structrue, geological feature, rotation strain and metallogeny of NW-striking transfer fault zone are also discussed. NE-trending strike-slip fault zone, as a whole, entered action during Pacific movement and underwent 3 stages: the strike-slip shear, the pull-apart extension and the’ compressive thrust. The aurthors studied macro-and microscopic features of strike-slip fault and its control of uranium mineralization at Jinguangchung deposit by means of modern structure analysis, micro-submicroscopic investigation and geophysical measurement.

Spatial distributions of organic carbon and nitrogen and their isotopic compositions in sediments of the Changjiang Estuary and its adjacent sea area

The spatial distribution patterns of total organic carbon and total nitrogen show significant correlations with currents of the East China Sea Shelf. Corresponding to distributions of these currents, the study area could be divided into four different parts. Total organic carbon, total nitrogen, and organic carbon and nitrogen stable isotopes in sediments show linear correlations with mean grain size, respectively, thus ＂grain size effect＂ is an important factor that influences their distributions. C/N ratios can reflect source information of organic matter to a certain degree. In contrast, nitrogen stable isotope shows different spatial distribution patterns with C/N and organic carbon stable isotope, according to their relationships and regional distributions. The highest contribution （up to 50%） of terrestrial organic carbon appears near the Changjiang Estuary with isolines projecting towards northeast, indicating the influence of the Changjiang dilution water. Terrestrial particulate organic matter suffers from effects of diagenesis, benthos and incessant inputting of dead organic matter of plankton, after depositing in seabed. Therefore, the contribution of terrestrial organic carbon to particulate organic matter is obviously greater than that to organic matter in sediments in the same place.

The Mesozoic Basin-Mountain Coupling Process of the Southern East China Sea Shelf Basin and its Adjacent Land Area

Basin-mountain coupling is a key issue for basin formation and evolution. The analysis of basin-mountain coupling process, as well as quantitative or semiquantitative restoration of prototype basin and the evolution of continental margin, can be used to interpret the geological process of basin-range conversion and reconstruct early prototype basins, which is a difficult and leadin~ scientific oroblem of basin research.

A study on zooplankton distribution patterns and indicator species in Kuroshio upstream area and adjacent East China Sea

On the basis of the data of zooplankton biomass and three major taxa—— Copepoda, Chaetognatha andSiphonophora of May-June 1986, July-August and December 1987, the distributional patterns and the indicator species of zooplankton in the Kuroshio and adjacent waters of the East China Sea are preliminarily studied. The results are as follows:The horizontal distribution of zooplankton biomass and the abundance of copepods, chaetognaths and siphonophores arecurred in the continent area northwest of Taiwan and the south-centre section of the East China Sea continent, which are the mix front of different waters. Zooplankton in the water area inside of Ryukyu Islands presented low abundance and high diversity. There are clear seasonal variations in zooplankton biomass and abundance in the study area. The strength or weakness of different water masses and fronts is the basic reason for the variations of zooplankton biomass and abundance.The species composition of zooplankton in the study area is complex and varies, however, the tropic oceanic species predominates overwhelmingly. The distribution of different ecotype species evidences the distribution of different water masses and the state of mixture. The indicator species of each water mass are listed in the paper so as to provide grounds for the variation of currents in the Kuroshio area.The temperature and salinity of sea water are important factors affecting zooplankton distribution, composition and diversity , however the role of salinity is major. With the replacement of one season by another, the correlative levels of temperature and salinity to various zooplankton taxa are more or less significant.

Study of radioactive status in the Zhujiang Estuary and adjacent sea area in South China Sea (SCS)

Through the investigation on radioactive activities of water, sediment and some marine organismsin the Zhujiang Estuary, adjacent sea area and the distributary mouths of the Zhujiang River, activities of total α. radioactivity, total β radioactivity, artificial radioactive 90Srand 157Cs, and factors inflencing the distribution and the content of U in seawater are studied.The mainly radioactive pollution substances and their sources in the sea area are studied by γ spectra obtained from sediment in the sea area. The results show that the main radioactivity substances are natural radioactivity U,Th series and 40K. which were produced by the modern industry and transported into the sea through the main current of the Zhujiang River.

A POSSIBLE IMPACT OF EL NINO MODOKI ON SEA SURFACE TEMPERATURE OF CHINA'S OFFSHORE AND ITS ADJACENT REGIONS

El Nio Modoki,similar to but different from canonical El Nio,has been observed since the late1970s.In this paper,using HadISST and NCEP/NCAR wind data,we analyze the relationship between El Nio Modoki and Sea Surface Temperature(SST)in the offshore area of China and its adjacent waters for different seasons.Our results show a significant negative correlation between El Nio Modoki in summer and SST in autumn in the offshore area of China and its adjacent waters,particularly for regions located in the east of the Kuroshio.It is also found that during El Nio Modoki period,anomalous northerlies prevail over the regions from the northern part of the Philippines to the offshore area of China,indicating that the northerlies are unfavorable for the transport of warm water from the western tropical Pacific to the mid-latitude area.Consequently,El Nio Modoki in summer may play a substantial role in cold SST anomalies in the offshore area of China and its adjacent waters in autumn through the influence of the Kuroshio,with a lagged response of the ocean to the atmospheric wind field.

Tele-Network Design Based on Queue Competition Algorithm

In this paper, we report research on how to design the tele-network. First of all, we defined the reliability of tele-network. According to the definition, we divide the whole reliability into two parts:the reliability of the mini-way and that of the whole system. Then we do algebra unintersection of the mini-way, deriving a function of reliability of tele-network. Also, we got a function of the cost of tele-network after analyzing the cost of arcs and points. Finally, we give a mathematical model to design a tele-network. For the algorithm, we define the distance of a network and adjacent area within certain boundaries . We present a new algorithm--Queue Competition Algorithm (QCA) based on the adjacent area . The QCA correlates sequence of fitnesses in their father-generations with hunting zone of mutation and the number of individuals generated by mutation, making the stronger fitness in a small zone converge at a local extreme value, but the weaker one takes the advantage of lots of individuals and a big zone to hunt a new local extreme value. In this way, we get the overall extreme value. Numerical simulation shows that we can get the efficient hunting and exact solution by using QCA. The QCA efficient hunting and exact solution.

Sectoral Features of the Tenir-Too Mountains

For the first time, the separating issues of the Tenir-Too mountains into sectors in contrast to the accepted schemes of physical geography as a province and sub-province were discussed. Since the term province is more acceptable in political science than in physical geography, the main factors in the process of sector formation were determined. The purpose of this article is not only to describe the high altitudes of the Tenir-Too mountains, but theoretically substantiate their formation, ecological and genetic features, and distribution patterns. Until today the Tenir-Too mountain area is not divided into sectors and subsectors with significant changes to the stencil scheme, which has been used to date in the physical geographical zoning. Research methods in this work are based on the recent study materials collected from meteorological stations of Tenir-Too region. Hypsometric and topographic maps were used to identify high altitude ranges, and climatic factors were separated by zones. Plant species and genus divisions were identified. In some areas of the Tenir-Too the range of altitudes along the routes was studied.

A Method for Integrating Modelling with Decomposition

To make a bridge between engineering information and the geometry of product model, it is crucial to manipulate product model with form features containing high-level engineering information. In recent years much research has been undergone in the area of form feature recognition. In many previous works form feature recognition usually starts with a finished CAD model. The shape of a finished model consisted of a number of features is much more complex than that of a single feature. This problem was ignored by many previous works. In this paper a completely context-independed method is provided. In designing the part,. the feature-based model is decomposed into a quasi-feature-based one that can be converted into various context-oriented feature models required by specific context-oriented applications. In order to decompose features into quasi-features which have convex volumes, this paper proposes a method which integrates modelling with decomposition.