Utilizing sediment grain size characteristics to assess the effectiveness of clay–sand barriers in reducing aeolian erosion in Minqin desert area,China

The clay–sand barriers in Minqin desert area,China,represent a pioneering windbreak and sand fixation project with a venerable history of 60 a.However,studies on evaluating the long-term effectiveness of clay–sand barriers against aeolian erosion,particularly from the perspective of surface sediment grain size,are limited and thus insufficient to ascertain the protective impact of these barriers on regional aeolian activities.This study focused on the surface sediments(topsoil of 0–3 cm depth)of clay–sand barriers in Minqin desert area to explain their erosion resistance from the perspective of surface sediment grain size.In March 2023,six clay–sand barrier sampling plots with clay–sand barriers of different deployment durations(1,5,10,20,40,and 60 a)were selected as experimental plots,and one control sampling plot was set in an adjacent mobile sandy area without sand barriers.Surface sediment samples were collected from the topsoil of each sampling plot in the study area in April 2023 and sediment grain size characteristics were analyzed.Results indicated a predominance of fine and medium sands in the surface sediments of the study area.The deployment of clay–sand barriers cultivated a fine quality in grain size composition of the regional surface sediments,increasing the average contents of very fine sand,silt,and clay by 30.82%,417.38%,and 381.52%,respectively.This trend became markedly pronounced a decade after the deployment of clay–sand barriers.The effectiveness of clay–sand barriers in erosion resistance was manifested through reduced wind velocity,the interception of sand flow,and the promotion of fine surface sediment particles.Coarser particles such as medium,coarse,and very coarse sands predominantly accumulated on the external side of the barriers,while finer particles such as fine and very fine sands concentrated in the upwind(northwest)region of the barriers.By contrast,the contents of finest particles such as silt and clay were higher in the downwind(southeast)region of the sampling plots.For the study area,the deployment of clay–sand barriers remains one of the most cost-effective engineering solutions for aeolian erosion control,with sediment grain size parameters serving as quantitative indicators for the assessment of these barriers in combating desertification.The results of this study provide a theoretical foundation for the construction of windbreak and sand fixation systems and the optimization of artificial sand control projects in arid desert areas.

Aeolian processes on sandy desertification of an alpine meadow: A wind tunnel experiment

In recent years,the desertification of alpine meadows has become a serious ecological problem and has gradually become a threat to regional economic activities in Maqu County.To reveal the mechanism for sandy desertification of alpine meadows,we conducted wind tunnel experiments on aeolian processes over sandy alpine meadows.Results show that the sandflux profile of mix-sized sediment decays exponentially with increasing height.However,the profile pattern of a group of uniform-sized particles depends on the experimental wind speeds.The profile pattern of all the groups studied can be expressed by exponential decay functions when the wind speed is less than or equal to 16 m/s.while that for all the groups studied can be expressed by a Gaussian distribution function when the wind speed is above 16 m/s.The average saltation heights of mixed sands at wind speeds of 12 m/s,16 m/s,20 m/s,and 24 m/s were 2.74,4.19,5.28,and 6.12 cm,respectively.The mean grain size basically first decreases and then increases with increasing height under different wind speeds.The sorting improves with increasing wind speed,while the kurtosis and skewness show relationships with only the characteristics of the parent soil.

Re-evaluating the vertical mass-flux profiles of aeolian sediment at the southern fringe of the Taklimakan Desert, China

Reliable estimation of the mass-flux profiles of aeolian sediment is essential for predicting sediment transport rates accurately and designing measures to cope with wind-erosion. Vertical mass-flux profiles from seventeen wind-erosion events were re-evaluated using five typical models based on observed data obtained from a smooth bare field at the southern fringe of the Taklimakan Desert, China. The results showed that the exponential-function model and the logarithmic-function model exhibited the poorest fit between observed and predicted mass-flux profiles. The power-function model and the modified power-function model improved the fit to field data to an equivalent extent, while the five-parameter combined-function model with a scale constant（σ） of 0.00001 m（different from the σ value proposed by Fryear, which represented the height above which 50% of the total mass flux occurred） was verified as the best for describing the vertical aeolian sediment mass-flux profiles using goodness of fit（R2） and the Akaike Information Criterion（AIC） values to evaluate model performance. According to relationships among model parameters, the modified power model played a prominent explanatory role in describing the vertical profiles of the observed data, whereas the exponential model played a coordinating role. In addition, it was found that the vertical profiles could not be extrapolated using the five selected models or easily estimated using an efficient model without field observations by a near-surface sampler at 0 to 0.05 m.

Real-Time Simulation of Aeolian Sand Movement and Sand Ripple Evolution: A Method Based on the Physics of Blown Sand

Simulation and visualization of aeolian sand movement and sand ripple evolution are a challenging subject. In this paper, we propose a physically based modeling and simulating method that can be used to synthesize sandy terrain in various patterns. Our method is based on the mechanical behavior of individual sand grains, which are widely studied in the physics of blown sand. We accounted significant mechanisms of sand transportation into the sand model, such as saltation, successive saltation and collapsing, while simplified the vegetation model and wind field model to make the simulation feasible and affordable. We implemented the proposed method on the programming graphics processing unit （GPU） to get real-time simulation and rendering. Finally, we proved that our method can reflect many characteristics of sand ripple evolution through several demonstrations. We also gave several synthesized desert scenes made from the simulated height field to display its significance on application.