For the quad tilt rotor aircraft, a computational fluid dynamics method based on multiple reference frames (MRF) was used to analyze the influence of aerodynamic layout parameters on the aerodynamic characteristics of...For the quad tilt rotor aircraft, a computational fluid dynamics method based on multiple reference frames (MRF) was used to analyze the influence of aerodynamic layout parameters on the aerodynamic characteristics of the quad tilt rotor aircraft. Firstly, a numerical simulation method for the interference flow field of the quad tilt rotor aircraft is established. Based on this method, the aerodynamic characteristics of isolated rotors, rotor combinations at different lateral positions on the wing, and rotor rotation directions under different inflow velocities were calculated and analyzed, in order to grasp their aerodynamic interference laws and provide reference for the design and control theory research of such aircraft.展开更多
Investigations into the aerodynamic properties of vertical sound barriers exposed to high-speed operations employ computational fluid dynamics.The primary focus of this research is to evaluate the influence of train s...Investigations into the aerodynamic properties of vertical sound barriers exposed to high-speed operations employ computational fluid dynamics.The primary focus of this research is to evaluate the influence of train speed and the distance(D)from the track centerline under various operating conditions.The findings elucidate a marked elevation in the aerodynamic effect amplitude on sound barriers as train speeds increase.In single-train passages,the aerodynamic effect amplitude manifests a direct relationship with the square of the train speed.When two trains pass each other,the aerodynamic amplitude intensifies due to an additional aerodynamic increment on the sound barrier.This increment exhibits an approximate quadratic correlation with the retrograde train speed.Notably,the impact of high-speed trains on sound barrier aerodynamics surpasses that of low-speed trains,and this discrepancy amplifies with larger speed differentials between trains.Moreover,the train-induced aerodynamic effect diminishes significantly with greater distance(D),with occurrences of pressure coefficient(CP)exceeding the standard thresholds during dual-train passages.This study culminates in the formulation of universal equations for quantifying the influence of train speed and distance(D)on sound barrier aerodynamic characteristics across various operational scenarios.展开更多
This study focuses on the aerodynamic characteristics and flow mechanism of three different configurations of ram-air parafoil with open/closed air inlet and bulges. Firstly, we designed a special parafoil configurati...This study focuses on the aerodynamic characteristics and flow mechanism of three different configurations of ram-air parafoil with open/closed air inlet and bulges. Firstly, we designed a special parafoil configuration for this study. Then we used numerical simulation to obtain the aerodynamic data of three parafoils at different angles of attack, and studied the influence of the bulge and the leading edge open/closed inlet on the aerodynamic performance of the ram-air parafoil. Finally, we study the flow mechanism of the ram-air parafoil through the pressure distribution and flow field. The results of the study show that compared with the aerodynamic parameters of the parafoil without bulges, the optimal angle of attack of the two parafoils with bulges is increased by 4?, the maximum lift to drag ratio of the parafoil with closed leading edge is reduced by about 4.3% and the optimal angle of attack is reduced by about 2?. The maximum lift to drag ratio of the parafoil with open leading edge is reduced by about 23.6% and the stalling angle of attack is reduced by about 4?. The pressure on the surface of a ram-air parafoil with open leading edge inlet is the highest. .展开更多
To study the influence of the pantograph fixing position on aerodynamic characteristics of high-speed trains, the aerodynamic models of high-speed trains with eight cars were established based on the theory of com- pu...To study the influence of the pantograph fixing position on aerodynamic characteristics of high-speed trains, the aerodynamic models of high-speed trains with eight cars were established based on the theory of com- putational fluid dynamics, and eight cases with pantographs fixed on different positions and in different operational orientations were considered. The pantographs were fixed on the front or the rear end of the first middle car or fixed on the front or the rear end of the last middle car. The external flow fields of the high-speed trains were numeri- cally simulated using the software STAR-CCM+. The results show that the pantograph fixing position has little effect on the aerodynamic drag force of the head car and has a large effect on the aerodynamic drag force of the tail car. The influences of the pantograph fixing position on the aerodynamic lift forces of the head car, tail car and pan- tographs are obvious. Among the eight cases, considering the total aerodynamic drag force of the train and the aerodynamic lift force of the lifted pantograph, when the pantographs are fixed on the rear end of the last middle car and the lifted pantograph is in the knuckle-upstream ori- entation, the aerodynamic performance of the high-speed train is the best.展开更多
The pitching-down flapping is a new type of bionic flapping,which was invented by the author based on previous studies on the aerodynamic mechanisms of fruit fly(pitching-up)flapping.The motivation of this invention i...The pitching-down flapping is a new type of bionic flapping,which was invented by the author based on previous studies on the aerodynamic mechanisms of fruit fly(pitching-up)flapping.The motivation of this invention is to improve the aerodynamic characteristics of flapping Micro Air Vehicles(MAVs).In this paper the pitching-down flapping is briefly introduced.The major works include:(1)Computing the power requirements of pitching-down flapping in three modes(advanced,symmetrical, delayed),which were compared with those of pitching-up flapping;(2)Investigating the effects of translational acceleration time,Δτ_t,and rotational time,Δτ_r,at the end of a stroke,and the angle of attack,α,in the middle of a stroke on the aerodynamic characteristics in symmetrical mode;(3)Investigating the effect of camber on pitching-down flapping.From the above works, conclusions can be drawn that:(1)Compared with the pitching-up flapping,the pitching-down flapping can greatly reduce the time-averaged power requirements;(2)The increase in Δτt and the decrease in Δτ_r can increase both the lift and drag coefficients, but the time-averaged ratio of lift to drag changes a little.And α has significant effect on the aerodynamic characteristics of the pitching-down flapping;(3)The positive camber can effectively increase the lift coefficient and the ratio of lift to drag.展开更多
Aimed at the needs of deceleration of submunitions dispensed from the ballistic missile, wind tunnel tests were performed on the submunitions with different tail wing sizes at the Mach number range from 0.7 to 3.0 and...Aimed at the needs of deceleration of submunitions dispensed from the ballistic missile, wind tunnel tests were performed on the submunitions with different tail wing sizes at the Mach number range from 0.7 to 3.0 and the angle of attack range from 0° to 14°. Experimental data about the variance of aerodynamic coefficients with the Mach number and angle of attack were obtained systemically. The effects of the tail wing sizes on the drag coefficients and the center of pressure coefficients were discussed. Analyzed results show the arc tail wings designed are beneficial to both the deceleration effect and static stability. These results are significant to the tail wing design and its applications to the submunitions deceleration..展开更多
The transonic-supersonic wind tunnel experiment on the aerodynamics of the rockets and missiles that have four, six, eight flat or wrap-around fins is introduced. The experimental results show, while M∞〈2.0, with th...The transonic-supersonic wind tunnel experiment on the aerodynamics of the rockets and missiles that have four, six, eight flat or wrap-around fins is introduced. The experimental results show, while M∞〈2.0, with the increase of the fins'number, the derivative of lift coefficient is increasing, the pressure center is shifting backwards, and the longitudinal static stability is augmenting. On the contrary, while the Mach number exceeds a certain supersonic value, the aerodynamic effectiveness of the eight-fin missiles would be lower than that of the six-fin missiles. For the low speed short-range missiles, by adopting six, eight or ten flat fins configuration, the lift effectiveness can be greatly increased, the pressure center can be shifted backwards, the static and dynamic stability can be obviously enhanced. For the high speed long-range large rockets and missiles launched from multi-tube launcher, the configuration adopting more than six fins can not be useful for increasing the stability but would make the rolling rate instable during the flight.展开更多
Based on investigations into the flow field of ducted fan aircrafts,structural parameters of duct are quantified.A three-dimensional model is established for numerical simulation,and adaptive Cartesian grid is used to...Based on investigations into the flow field of ducted fan aircrafts,structural parameters of duct are quantified.A three-dimensional model is established for numerical simulation,and adaptive Cartesian grid is used to mesh the model in order to improve calculation speed and solution accuracy.Three-dimensional Navier-Stokes equations are brought in to analyze different duct styles.Generalization of simulation results leads to several conclusions in duct aerodynamics to help design ducted fan aircrafts.展开更多
A program for calculating the aerodynamic properties of hypersonic vehicles based on the surface element method was developed using the general-purpose programming language C++. The calculated values of lift coefficie...A program for calculating the aerodynamic properties of hypersonic vehicles based on the surface element method was developed using the general-purpose programming language C++. The calculated values of lift coefficients, drag coefficients, and surface pressure coefficients are discussed with the results of wind tunnel experiments using the HL-20 lift body and the NASA hypersonic aircraft STS Columbia OV-102 as research subjects. Finally, the results of the experimental and wind tunnel studies of the aerodynamic characteristics of the HL-20 lift body at an altitude of 65 km and Mach numbers of 6 and 10 Ma are discussed. The maximum error in the aerodynamic characteristics at 6 Ma does not exceed 3%, consistent with the results. The maximum error at 10 Ma occurs in the 11° - 14° angle of attack and does not exceed 10%, which is still within the error tolerance. The STS results for NASA’s hypersonic aircraft were also tested using this procedure. Experimental aerodynamic data for the Colombian OV-102 aircraft. The results show that the program takes only 10 minutes to calculate the results, with no more than 2% error from the wind tunnel experimental results.展开更多
The Longitudinal Aerodynamic Characteristics (LACs)of a wing-body without tail unit is computed and tested in wind tunnel. The empirical formulas of Datcom and some other authors are applied to estimate the basic Ae...The Longitudinal Aerodynamic Characteristics (LACs)of a wing-body without tail unit is computed and tested in wind tunnel. The empirical formulas of Datcom and some other authors are applied to estimate the basic Aerodynamic Coefficients. Two wing options are covered as analysis space, namely, the double-delta wing and streak wing, getting two analysis groups respectively. Good agreement between the computation results and the wind tunnel tests shows that the methodology presented is a simple and reliable way to calculate this kind of novel wing-body configurations.展开更多
An experimental study on examining aerodynamic characteristics of fuselage cross sections for RLVs (Reusable Launch Vehicles) was conducted at Mach number 0.3, 0.9 and 4.0 in the wind tunnel of ISAS (Institute of Spac...An experimental study on examining aerodynamic characteristics of fuselage cross sections for RLVs (Reusable Launch Vehicles) was conducted at Mach number 0.3, 0.9 and 4.0 in the wind tunnel of ISAS (Institute of Space and Astronautical Science), JAXA (Japan Aerospace Exploration Agency). Three bodies, having the same projected area and length, with and without a set of fins, were tested. Their cross sections are a circle, a square and a triangle with rounded corners. The results showed that the fuselage cross sections had large effects on aerodynamic characteristics in subsonic and transonic flow. The lift coefficient of the model having the triangular cross section with a set of the fins was larger than that of the others in high angles of attack region due to contributions of the separation vortices generated from the fuselage expanding to the wing surface.展开更多
The investigation on the aerodynamic characteristics of the high-attitude long-endurance (HALE) Diamond Joined-Wing configuration unmanned aerial vehicle ( UAV) was carried out by the theoretical analysis method and n...The investigation on the aerodynamic characteristics of the high-attitude long-endurance (HALE) Diamond Joined-Wing configuration unmanned aerial vehicle ( UAV) was carried out by the theoretical analysis method and numerical simulation. Research indicates that as the wing of the UAV is composed of the front wing and the after wing, the after wing has the ability to transmit the front wing's boundary layer to the after wing root which can inhibit the front wing's flow separation. Although the front wing was affected by the retardation of the after wing, the aerodynamic performance of the front wing was better than that of alone front wing in most cases. The after wing was also affected by the wake and downwash of the front wing, and its aerodynamic performance was greatly decreased. The characteristic curve of the pitching moment of the UAV had nonlinear characteristics. The flow field structure of the after wing changed by the front wing wake direct sweep and flow separation at the after wing root were the main reasons that non-linear ′rise′phenomenon occurred in two segments ( α = 0° and α = 8° ) of the characteristic curve of pitching moment. Moreover, coupling of the flow separation characteristic of the front wing and the after wing resulted in the pitching moment ′pitchup′ phenomenon. The lateral-directional static stability of the flat layout was weak. The HALE Diamond Joined-Wing configuration UAV ' s aerodynamic performance can be improved and the problems in engineering applications can be effectively alleviated by adjusting the overall layout parameters.展开更多
A new analytical approach, based on a lifting surface model and a full span free wake analysis using the curved vortex element on the circular arc, is established for evaluating the aerodynamic characteristics of the...A new analytical approach, based on a lifting surface model and a full span free wake analysis using the curved vortex element on the circular arc, is established for evaluating the aerodynamic characteristics of the helicopter rotor with an anhedral blade tip and is emphasized to be applicable to various blade tip configurations, such as the tapered, swept, anhedral and combined shapes. Sample calculations on the rotor aerodynamic characteristics for different anhedral tips in both hover and forward flight are performed. The results on the induced velocity, blade section lift distribution, tip vortex path and rotor performance are presented so that the effect of the anhedral tip on the rotor aerodynamic characteristics is fully analyzed.展开更多
A projectile with exotic wraparound wings( WAW) configuration is designed to improve the finstabilized projectile shooting quality. Two fin-stabilized projectiles with the same body with and without exotic WAW configu...A projectile with exotic wraparound wings( WAW) configuration is designed to improve the finstabilized projectile shooting quality. Two fin-stabilized projectiles with the same body with and without exotic WAW configuration are simulated numerically by applying the Roe scheme. The shear-stress transport turbulence models and the lower-upper symmetric Gauss-Seidel implicit method are used to solve 3D Reynoldsaveraged Navier—Stokes equations. The differences in aerodynamic coefficients and aerodynamic characteristics of the projectiles when the Mach number varies from 0. 35 to 0. 95 are obtained,and the cause of these differences is analyzed. The calculation results indicate that the lift-to-drag ratio of the projectile significantly increases,the rolling moment decreases,and the position of the pressure center of the projectile shows relatively small changes when the exotic WAW configuration is used. Therefore,this projectile can obviously reduce rolling effect,enlarge range and improve flying stability.展开更多
Variable-sweep wings have large shape-changing capabilities and wide flight envelops,which are considered as one of the most promising directions for intelligent morphing UAVs.Aerodynamic investigations always focus o...Variable-sweep wings have large shape-changing capabilities and wide flight envelops,which are considered as one of the most promising directions for intelligent morphing UAVs.Aerodynamic investigations always focus on several static states in the varying sweep process,which ignore the unsteady aerodynamic characteristics.However,deviations to static aerodynamic forces are inevitably caused by dynamic sweep motion.In this work,first,unsteady aerodynamic characteristics on a typical variable-sweep UAV with large aspect ratio were analyzed.Then,deep mechanism of unsteady aerodynamic characteristics in the varying sweep process was studied.Finally,numerical simulation method integrated with structured moving overset grids was applied to solve the unsteady fluid of varying sweep process.The simulation results of a sweep forward-backward circle show a distinct dynamic hysteresis loop surrounding the static data for the aerodynamic forces.Compared with the static lift coefficients,at the same sweep angles,dynamic lift coefficient in sweep forward process are all smaller,while dynamic sweep backward lift coefficient are all larger.In addition,dynamic deviations to static lift coefficient are positively related with the varying sweep speeds.Mechanism study on the unsteady aerodynamic characteristics indicates that three key factors lead to the dynamic hysteresis loop in varying sweep process.They are the effects of additional velocity caused by varying sweep motion,the effects of flow hysteresis and viscosity.The additional velocity induced by sweep motion affects the transversal flow direction along the wing and the effective angle of attack at the airfoil profile.The physical properties of flow,the hysteresis and viscosity affect the unsteady aerodynamic characteristics by flow separation and induced vortexes.展开更多
In this study,an improved delayed detached eddy simulation(IDDES)method based on the shear-stress transport(SST)k-ωturbulence model has been used to investigate the underbody flow characteristics of a high-speed trai...In this study,an improved delayed detached eddy simulation(IDDES)method based on the shear-stress transport(SST)k-ωturbulence model has been used to investigate the underbody flow characteristics of a high-speed train operating at lower temperatures with Reynolds number Re=1.85×10^(6).The accuracy of the numerical method has been validated by wind tunnel tests.The aerodynamic drag of the train,pressure distribution on the surface of the train,the flow around the vehicle,and the wake flow are compared for four temperature values:+15℃,0℃,−15℃,and−30℃.It was found that lower operating t emperatures significantly increased the aerodynamic drag force of the train.The drag overall at low temperatures increased by 5.3%(0℃),11.0%(−15℃),and 17.4%(−30℃),respectively,relative to the drag at+15℃.In addition,the low temperature e nhances the positive and negative pressures around and on the surface of the car body,raising the peak positive and negative pressure values in areas susceptible to impingement flow and to rapid changes in flow velocity.The range of train-induced winds around the car body is significantly reduced,the distribution area of vorticity moves backwards,and the airflow velocity in the bogie cavity is significantly increased.At the same time,the temperature causes a significant velocity reduction in the wake flow.It can be seen that the temperature reduction can seriously disturb the normal operation of the train while increasing the aerodynamic drag and energy consumption,and significantly interfering with the airflow characteristics around the car body.展开更多
A numerical method has been used to analyze the flow field related to a NACA 0015 airfoil with and without a flap and assess the influence of the flap height and angle on the surface pressure coefficient,lift coeffici...A numerical method has been used to analyze the flow field related to a NACA 0015 airfoil with and without a flap and assess the influence of the flap height and angle on the surface pressure coefficient,lift coefficient,and drag coefficient.The numerical results demonstrate that the flap can effectively improve the lift coefficient of the airfoil;however,at small attack angles,its influence is significantly reduced.When the angle of attack exceeds the critical stall angle and the flap height is 1.5%of the chord length,the influence of the flap becomes very evident.As the flap height increases,the starting point of the separation vortex gradually moves forward and generates a larger wake vortex.Optimal aerodynamic characteristics are obtained for 1.5%(of the chord length)flap height and a 45°flap angle;in this case,the separation vortex is effectively reduced.展开更多
The aerodynamic and aeroacoustic characteristics of a scissor tail-rotor in a forward flight are numerically calculated.A novel computational fluid dynamics(CFD)model based on Navier-Stokes(N-S)equations is presented ...The aerodynamic and aeroacoustic characteristics of a scissor tail-rotor in a forward flight are numerically calculated.A novel computational fluid dynamics(CFD)model based on Navier-Stokes(N-S)equations is presented to simulate the unsteady flowfield and the aerodynamic characteristics of a scissor tail-rotor in the forward flight.Then the Farassat Formulation 1 Aderived from the FW-H equation is coupled into the CFD model in order to compute the aeroacoustic characteristics of the scissor tail-rotor.In addition,two different scissor tail-rotor configurations,i.e.,the L-and U-configuration,are analyzed in details and compared with a conventional one.The influence of scissor angles on the aerodynamic and aeroacoustic characteristics of the scissor tail-rotor is also investigated.The simulation results demonstrate that the flowfield,aerodynamic force and aeroacoustic characteristics of a scissor tail-rotor are significantly different from the conventional one,and the aerodynamic interaction decreases with the increase of scissor angle,which leads to a reduction of amplitude variation of the tail-rotor thrust in the forward flight.The scissor angle has an important effect on the aerodynamics and aeroacoustics of the scissor tail-rotor.展开更多
This paper studies the influence of the accelerated overtaking process on the vehicles' transient aerodynamic characteristics, through 3-D numerical simulations with dynamic meshes and sliding interface technique. Nu...This paper studies the influence of the accelerated overtaking process on the vehicles' transient aerodynamic characteristics, through 3-D numerical simulations with dynamic meshes and sliding interface technique. Numerical accuracy is verified by experimental results. The aerodynamic characteristics of vehicles in the uniform overtaking process and the accelerated overtaking process are compared. It is shown that the speed variation of the overtaking van would influence the aerodynamic characteristics of the two vans, with greater influence on the overtaken van than on the overtaking van. The simulations of three different accelerated overtaking processes show that the greater the acceleration of the overtaking van, the larger the aerodynamic coefficients of the overtaken van. When the acceleration of the overtaking van increases by 1 m/s2, the maximum drag force, side force and yawing moment coefficients of the overtaken van all increase by more than 6%, to seriously affect the power performance and the stability of the vehicles. The analysis of the pressure fields under different accelerated conditions reveals the cause of variations of the aerodynamic characteristics of vehicles.展开更多
Based on computational fluid dynamics(CFD)/computational electromagnetics method(CEM)coupling method and surrogate model optimization techniques,an integration design method about aerodynamic/stealth characteristics o...Based on computational fluid dynamics(CFD)/computational electromagnetics method(CEM)coupling method and surrogate model optimization techniques,an integration design method about aerodynamic/stealth characteristics of airfoil is established.The O-type body-fitted and orthogonal grid around airfoil is first generated by using the Poisson equations,in which the points per wave and the normal range satisfy the aerodynamic and electromagnetic calculation accuracy requirement.Then the aerodynamic performance of airfoil is calculated by solving the Navier-Stokes(N-S)equations with Baldwin-Lomax(B-L)turbulence model.The stealth characteristics of airfoil are simulated by using finite volume time domain(FVTD)method based on the Maxwell′s equations,Steger-Warming flux splitting and the third-order MUSCL scheme.In addition,based upon the surrogate model optimization technique with full factorial design(FFD)and radial basis function(RBF),an integration design about aerodynamic/stealth characteristics of rotor airfoil is conducted by employing the CFD/CEM coupling method.The aerodynamic/stealth characteristics of NACA series airfoils with different maximum thickness and camber combinations are discussed.Finally,by choosing suitable lift-to-drag ratio and radar cross section(RCS)amplitudes of rotor airfoil in four important scattering regions as the objective function and constraint,the compromised airfoil with high lift-to-drag ratio and low scattering characteristics is designed via systemic and comprehensive analyses.展开更多
文摘For the quad tilt rotor aircraft, a computational fluid dynamics method based on multiple reference frames (MRF) was used to analyze the influence of aerodynamic layout parameters on the aerodynamic characteristics of the quad tilt rotor aircraft. Firstly, a numerical simulation method for the interference flow field of the quad tilt rotor aircraft is established. Based on this method, the aerodynamic characteristics of isolated rotors, rotor combinations at different lateral positions on the wing, and rotor rotation directions under different inflow velocities were calculated and analyzed, in order to grasp their aerodynamic interference laws and provide reference for the design and control theory research of such aircraft.
基金This study was supported in part by the National Natural Science Foundation of China under Grant Nos.52278463,52208505,and 52202422.
文摘Investigations into the aerodynamic properties of vertical sound barriers exposed to high-speed operations employ computational fluid dynamics.The primary focus of this research is to evaluate the influence of train speed and the distance(D)from the track centerline under various operating conditions.The findings elucidate a marked elevation in the aerodynamic effect amplitude on sound barriers as train speeds increase.In single-train passages,the aerodynamic effect amplitude manifests a direct relationship with the square of the train speed.When two trains pass each other,the aerodynamic amplitude intensifies due to an additional aerodynamic increment on the sound barrier.This increment exhibits an approximate quadratic correlation with the retrograde train speed.Notably,the impact of high-speed trains on sound barrier aerodynamics surpasses that of low-speed trains,and this discrepancy amplifies with larger speed differentials between trains.Moreover,the train-induced aerodynamic effect diminishes significantly with greater distance(D),with occurrences of pressure coefficient(CP)exceeding the standard thresholds during dual-train passages.This study culminates in the formulation of universal equations for quantifying the influence of train speed and distance(D)on sound barrier aerodynamic characteristics across various operational scenarios.
文摘This study focuses on the aerodynamic characteristics and flow mechanism of three different configurations of ram-air parafoil with open/closed air inlet and bulges. Firstly, we designed a special parafoil configuration for this study. Then we used numerical simulation to obtain the aerodynamic data of three parafoils at different angles of attack, and studied the influence of the bulge and the leading edge open/closed inlet on the aerodynamic performance of the ram-air parafoil. Finally, we study the flow mechanism of the ram-air parafoil through the pressure distribution and flow field. The results of the study show that compared with the aerodynamic parameters of the parafoil without bulges, the optimal angle of attack of the two parafoils with bulges is increased by 4?, the maximum lift to drag ratio of the parafoil with closed leading edge is reduced by about 4.3% and the optimal angle of attack is reduced by about 2?. The maximum lift to drag ratio of the parafoil with open leading edge is reduced by about 23.6% and the stalling angle of attack is reduced by about 4?. The pressure on the surface of a ram-air parafoil with open leading edge inlet is the highest. .
基金supported by the High-Speed Railway Basic Research Fund Key Project of China(Grant No.U1234208)the National Natural Science Foundation of China(Grant Nos.51475394 and 51605397)
文摘To study the influence of the pantograph fixing position on aerodynamic characteristics of high-speed trains, the aerodynamic models of high-speed trains with eight cars were established based on the theory of com- putational fluid dynamics, and eight cases with pantographs fixed on different positions and in different operational orientations were considered. The pantographs were fixed on the front or the rear end of the first middle car or fixed on the front or the rear end of the last middle car. The external flow fields of the high-speed trains were numeri- cally simulated using the software STAR-CCM+. The results show that the pantograph fixing position has little effect on the aerodynamic drag force of the head car and has a large effect on the aerodynamic drag force of the tail car. The influences of the pantograph fixing position on the aerodynamic lift forces of the head car, tail car and pan- tographs are obvious. Among the eight cases, considering the total aerodynamic drag force of the train and the aerodynamic lift force of the lifted pantograph, when the pantographs are fixed on the rear end of the last middle car and the lifted pantograph is in the knuckle-upstream ori- entation, the aerodynamic performance of the high-speed train is the best.
文摘The pitching-down flapping is a new type of bionic flapping,which was invented by the author based on previous studies on the aerodynamic mechanisms of fruit fly(pitching-up)flapping.The motivation of this invention is to improve the aerodynamic characteristics of flapping Micro Air Vehicles(MAVs).In this paper the pitching-down flapping is briefly introduced.The major works include:(1)Computing the power requirements of pitching-down flapping in three modes(advanced,symmetrical, delayed),which were compared with those of pitching-up flapping;(2)Investigating the effects of translational acceleration time,Δτ_t,and rotational time,Δτ_r,at the end of a stroke,and the angle of attack,α,in the middle of a stroke on the aerodynamic characteristics in symmetrical mode;(3)Investigating the effect of camber on pitching-down flapping.From the above works, conclusions can be drawn that:(1)Compared with the pitching-up flapping,the pitching-down flapping can greatly reduce the time-averaged power requirements;(2)The increase in Δτt and the decrease in Δτ_r can increase both the lift and drag coefficients, but the time-averaged ratio of lift to drag changes a little.And α has significant effect on the aerodynamic characteristics of the pitching-down flapping;(3)The positive camber can effectively increase the lift coefficient and the ratio of lift to drag.
文摘Aimed at the needs of deceleration of submunitions dispensed from the ballistic missile, wind tunnel tests were performed on the submunitions with different tail wing sizes at the Mach number range from 0.7 to 3.0 and the angle of attack range from 0° to 14°. Experimental data about the variance of aerodynamic coefficients with the Mach number and angle of attack were obtained systemically. The effects of the tail wing sizes on the drag coefficients and the center of pressure coefficients were discussed. Analyzed results show the arc tail wings designed are beneficial to both the deceleration effect and static stability. These results are significant to the tail wing design and its applications to the submunitions deceleration..
文摘The transonic-supersonic wind tunnel experiment on the aerodynamics of the rockets and missiles that have four, six, eight flat or wrap-around fins is introduced. The experimental results show, while M∞〈2.0, with the increase of the fins'number, the derivative of lift coefficient is increasing, the pressure center is shifting backwards, and the longitudinal static stability is augmenting. On the contrary, while the Mach number exceeds a certain supersonic value, the aerodynamic effectiveness of the eight-fin missiles would be lower than that of the six-fin missiles. For the low speed short-range missiles, by adopting six, eight or ten flat fins configuration, the lift effectiveness can be greatly increased, the pressure center can be shifted backwards, the static and dynamic stability can be obviously enhanced. For the high speed long-range large rockets and missiles launched from multi-tube launcher, the configuration adopting more than six fins can not be useful for increasing the stability but would make the rolling rate instable during the flight.
文摘Based on investigations into the flow field of ducted fan aircrafts,structural parameters of duct are quantified.A three-dimensional model is established for numerical simulation,and adaptive Cartesian grid is used to mesh the model in order to improve calculation speed and solution accuracy.Three-dimensional Navier-Stokes equations are brought in to analyze different duct styles.Generalization of simulation results leads to several conclusions in duct aerodynamics to help design ducted fan aircrafts.
文摘A program for calculating the aerodynamic properties of hypersonic vehicles based on the surface element method was developed using the general-purpose programming language C++. The calculated values of lift coefficients, drag coefficients, and surface pressure coefficients are discussed with the results of wind tunnel experiments using the HL-20 lift body and the NASA hypersonic aircraft STS Columbia OV-102 as research subjects. Finally, the results of the experimental and wind tunnel studies of the aerodynamic characteristics of the HL-20 lift body at an altitude of 65 km and Mach numbers of 6 and 10 Ma are discussed. The maximum error in the aerodynamic characteristics at 6 Ma does not exceed 3%, consistent with the results. The maximum error at 10 Ma occurs in the 11° - 14° angle of attack and does not exceed 10%, which is still within the error tolerance. The STS results for NASA’s hypersonic aircraft were also tested using this procedure. Experimental aerodynamic data for the Colombian OV-102 aircraft. The results show that the program takes only 10 minutes to calculate the results, with no more than 2% error from the wind tunnel experimental results.
文摘The Longitudinal Aerodynamic Characteristics (LACs)of a wing-body without tail unit is computed and tested in wind tunnel. The empirical formulas of Datcom and some other authors are applied to estimate the basic Aerodynamic Coefficients. Two wing options are covered as analysis space, namely, the double-delta wing and streak wing, getting two analysis groups respectively. Good agreement between the computation results and the wind tunnel tests shows that the methodology presented is a simple and reliable way to calculate this kind of novel wing-body configurations.
文摘An experimental study on examining aerodynamic characteristics of fuselage cross sections for RLVs (Reusable Launch Vehicles) was conducted at Mach number 0.3, 0.9 and 4.0 in the wind tunnel of ISAS (Institute of Space and Astronautical Science), JAXA (Japan Aerospace Exploration Agency). Three bodies, having the same projected area and length, with and without a set of fins, were tested. Their cross sections are a circle, a square and a triangle with rounded corners. The results showed that the fuselage cross sections had large effects on aerodynamic characteristics in subsonic and transonic flow. The lift coefficient of the model having the triangular cross section with a set of the fins was larger than that of the others in high angles of attack region due to contributions of the separation vortices generated from the fuselage expanding to the wing surface.
基金Sponsored by the Civil Aircraft Project(Grant No.MIE-2015-F-009)the Shaanxi Province Science and Technology Project(Grant No.2015KTCQ01-78)
文摘The investigation on the aerodynamic characteristics of the high-attitude long-endurance (HALE) Diamond Joined-Wing configuration unmanned aerial vehicle ( UAV) was carried out by the theoretical analysis method and numerical simulation. Research indicates that as the wing of the UAV is composed of the front wing and the after wing, the after wing has the ability to transmit the front wing's boundary layer to the after wing root which can inhibit the front wing's flow separation. Although the front wing was affected by the retardation of the after wing, the aerodynamic performance of the front wing was better than that of alone front wing in most cases. The after wing was also affected by the wake and downwash of the front wing, and its aerodynamic performance was greatly decreased. The characteristic curve of the pitching moment of the UAV had nonlinear characteristics. The flow field structure of the after wing changed by the front wing wake direct sweep and flow separation at the after wing root were the main reasons that non-linear ′rise′phenomenon occurred in two segments ( α = 0° and α = 8° ) of the characteristic curve of pitching moment. Moreover, coupling of the flow separation characteristic of the front wing and the after wing resulted in the pitching moment ′pitchup′ phenomenon. The lateral-directional static stability of the flat layout was weak. The HALE Diamond Joined-Wing configuration UAV ' s aerodynamic performance can be improved and the problems in engineering applications can be effectively alleviated by adjusting the overall layout parameters.
文摘A new analytical approach, based on a lifting surface model and a full span free wake analysis using the curved vortex element on the circular arc, is established for evaluating the aerodynamic characteristics of the helicopter rotor with an anhedral blade tip and is emphasized to be applicable to various blade tip configurations, such as the tapered, swept, anhedral and combined shapes. Sample calculations on the rotor aerodynamic characteristics for different anhedral tips in both hover and forward flight are performed. The results on the induced velocity, blade section lift distribution, tip vortex path and rotor performance are presented so that the effect of the anhedral tip on the rotor aerodynamic characteristics is fully analyzed.
基金Sponsored by the National Natural Science Foundation of China(Grant No.51076066)
文摘A projectile with exotic wraparound wings( WAW) configuration is designed to improve the finstabilized projectile shooting quality. Two fin-stabilized projectiles with the same body with and without exotic WAW configuration are simulated numerically by applying the Roe scheme. The shear-stress transport turbulence models and the lower-upper symmetric Gauss-Seidel implicit method are used to solve 3D Reynoldsaveraged Navier—Stokes equations. The differences in aerodynamic coefficients and aerodynamic characteristics of the projectiles when the Mach number varies from 0. 35 to 0. 95 are obtained,and the cause of these differences is analyzed. The calculation results indicate that the lift-to-drag ratio of the projectile significantly increases,the rolling moment decreases,and the position of the pressure center of the projectile shows relatively small changes when the exotic WAW configuration is used. Therefore,this projectile can obviously reduce rolling effect,enlarge range and improve flying stability.
基金supported by the National Natural Science Foundation of China(No.12202384)the Rotor Aerodynamics Key Laboratory Foundation of China Aerodynamics Research and Development Center(No.2108RAL202102-5).
文摘Variable-sweep wings have large shape-changing capabilities and wide flight envelops,which are considered as one of the most promising directions for intelligent morphing UAVs.Aerodynamic investigations always focus on several static states in the varying sweep process,which ignore the unsteady aerodynamic characteristics.However,deviations to static aerodynamic forces are inevitably caused by dynamic sweep motion.In this work,first,unsteady aerodynamic characteristics on a typical variable-sweep UAV with large aspect ratio were analyzed.Then,deep mechanism of unsteady aerodynamic characteristics in the varying sweep process was studied.Finally,numerical simulation method integrated with structured moving overset grids was applied to solve the unsteady fluid of varying sweep process.The simulation results of a sweep forward-backward circle show a distinct dynamic hysteresis loop surrounding the static data for the aerodynamic forces.Compared with the static lift coefficients,at the same sweep angles,dynamic lift coefficient in sweep forward process are all smaller,while dynamic sweep backward lift coefficient are all larger.In addition,dynamic deviations to static lift coefficient are positively related with the varying sweep speeds.Mechanism study on the unsteady aerodynamic characteristics indicates that three key factors lead to the dynamic hysteresis loop in varying sweep process.They are the effects of additional velocity caused by varying sweep motion,the effects of flow hysteresis and viscosity.The additional velocity induced by sweep motion affects the transversal flow direction along the wing and the effective angle of attack at the airfoil profile.The physical properties of flow,the hysteresis and viscosity affect the unsteady aerodynamic characteristics by flow separation and induced vortexes.
基金supported by the National Natural Science Foundation of China(Nos.52172363 and 52202429)the National Key Research and Development Program of China(No.2020YFF0304103-03)the Independent Exploration of Graduate Students of Central South University(No.2019zzts268),China.
文摘In this study,an improved delayed detached eddy simulation(IDDES)method based on the shear-stress transport(SST)k-ωturbulence model has been used to investigate the underbody flow characteristics of a high-speed train operating at lower temperatures with Reynolds number Re=1.85×10^(6).The accuracy of the numerical method has been validated by wind tunnel tests.The aerodynamic drag of the train,pressure distribution on the surface of the train,the flow around the vehicle,and the wake flow are compared for four temperature values:+15℃,0℃,−15℃,and−30℃.It was found that lower operating t emperatures significantly increased the aerodynamic drag force of the train.The drag overall at low temperatures increased by 5.3%(0℃),11.0%(−15℃),and 17.4%(−30℃),respectively,relative to the drag at+15℃.In addition,the low temperature e nhances the positive and negative pressures around and on the surface of the car body,raising the peak positive and negative pressure values in areas susceptible to impingement flow and to rapid changes in flow velocity.The range of train-induced winds around the car body is significantly reduced,the distribution area of vorticity moves backwards,and the airflow velocity in the bogie cavity is significantly increased.At the same time,the temperature causes a significant velocity reduction in the wake flow.It can be seen that the temperature reduction can seriously disturb the normal operation of the train while increasing the aerodynamic drag and energy consumption,and significantly interfering with the airflow characteristics around the car body.
基金supported by the National Natural Science Foundation Project(Grant Numbers 51966018 and 51466015)the Key Research&Development Program of Xinjiang(Grant Number 2022B01003).
文摘A numerical method has been used to analyze the flow field related to a NACA 0015 airfoil with and without a flap and assess the influence of the flap height and angle on the surface pressure coefficient,lift coefficient,and drag coefficient.The numerical results demonstrate that the flap can effectively improve the lift coefficient of the airfoil;however,at small attack angles,its influence is significantly reduced.When the angle of attack exceeds the critical stall angle and the flap height is 1.5%of the chord length,the influence of the flap becomes very evident.As the flap height increases,the starting point of the separation vortex gradually moves forward and generates a larger wake vortex.Optimal aerodynamic characteristics are obtained for 1.5%(of the chord length)flap height and a 45°flap angle;in this case,the separation vortex is effectively reduced.
文摘The aerodynamic and aeroacoustic characteristics of a scissor tail-rotor in a forward flight are numerically calculated.A novel computational fluid dynamics(CFD)model based on Navier-Stokes(N-S)equations is presented to simulate the unsteady flowfield and the aerodynamic characteristics of a scissor tail-rotor in the forward flight.Then the Farassat Formulation 1 Aderived from the FW-H equation is coupled into the CFD model in order to compute the aeroacoustic characteristics of the scissor tail-rotor.In addition,two different scissor tail-rotor configurations,i.e.,the L-and U-configuration,are analyzed in details and compared with a conventional one.The influence of scissor angles on the aerodynamic and aeroacoustic characteristics of the scissor tail-rotor is also investigated.The simulation results demonstrate that the flowfield,aerodynamic force and aeroacoustic characteristics of a scissor tail-rotor are significantly different from the conventional one,and the aerodynamic interaction decreases with the increase of scissor angle,which leads to a reduction of amplitude variation of the tail-rotor thrust in the forward flight.The scissor angle has an important effect on the aerodynamics and aeroacoustics of the scissor tail-rotor.
基金Project supported by the National Natural Science Foundation of China(Grant No.11372166)the Natural Science Foundation of Shandong Province(Grant No.ZR2014ZZM015)
文摘This paper studies the influence of the accelerated overtaking process on the vehicles' transient aerodynamic characteristics, through 3-D numerical simulations with dynamic meshes and sliding interface technique. Numerical accuracy is verified by experimental results. The aerodynamic characteristics of vehicles in the uniform overtaking process and the accelerated overtaking process are compared. It is shown that the speed variation of the overtaking van would influence the aerodynamic characteristics of the two vans, with greater influence on the overtaken van than on the overtaking van. The simulations of three different accelerated overtaking processes show that the greater the acceleration of the overtaking van, the larger the aerodynamic coefficients of the overtaken van. When the acceleration of the overtaking van increases by 1 m/s2, the maximum drag force, side force and yawing moment coefficients of the overtaken van all increase by more than 6%, to seriously affect the power performance and the stability of the vehicles. The analysis of the pressure fields under different accelerated conditions reveals the cause of variations of the aerodynamic characteristics of vehicles.
文摘Based on computational fluid dynamics(CFD)/computational electromagnetics method(CEM)coupling method and surrogate model optimization techniques,an integration design method about aerodynamic/stealth characteristics of airfoil is established.The O-type body-fitted and orthogonal grid around airfoil is first generated by using the Poisson equations,in which the points per wave and the normal range satisfy the aerodynamic and electromagnetic calculation accuracy requirement.Then the aerodynamic performance of airfoil is calculated by solving the Navier-Stokes(N-S)equations with Baldwin-Lomax(B-L)turbulence model.The stealth characteristics of airfoil are simulated by using finite volume time domain(FVTD)method based on the Maxwell′s equations,Steger-Warming flux splitting and the third-order MUSCL scheme.In addition,based upon the surrogate model optimization technique with full factorial design(FFD)and radial basis function(RBF),an integration design about aerodynamic/stealth characteristics of rotor airfoil is conducted by employing the CFD/CEM coupling method.The aerodynamic/stealth characteristics of NACA series airfoils with different maximum thickness and camber combinations are discussed.Finally,by choosing suitable lift-to-drag ratio and radar cross section(RCS)amplitudes of rotor airfoil in four important scattering regions as the objective function and constraint,the compromised airfoil with high lift-to-drag ratio and low scattering characteristics is designed via systemic and comprehensive analyses.