Floating periodic pontoons for broad bandgaps of water waves

The narrow attenuation bands of traditional marine structures have long been a challenge in mitigating water waves.In this paper,a metastructure(MS)composed of floating periodic pontoons is proposed for broadband water wave attenuation.The interaction of surface gravity waves with the MS is investigated using linear wave theory.The potential solutions of water waves by the MS with a finite array are developed by using the eigenfunction expansion matching method(EEMM),and the band structure of the MS is calculated by the transfer matrix method(TMM),in which the evanescent modes of waves are considered.The solution is verified against the existing numerical result for a special case.Based on the present solution,the association between Bragg resonance reflection and Bloch bandgaps is examined,the effects of pontoon geometry are analyzed,and the comparison between floating MS and bottom-mounted periodic structures is conducted.A computational fluid dynamics(CFD)model is further developed to assess the structures in practical fluid environments,and the floating MS presents excellent wave attenuation performance.The study presented here may provide a promising solution for protecting the coast and offshore structures.

Simulation of wave scattering over a floating platform in the ocean with a coupled CFD-IBM model

A numerical study of linear wave scattering over a floating platform has been simulated by an efficient numericalmodel in this letter.The non-hydrostatic model is used to simulate the free surface and the uneven bottom.For thesolid body modelling,the immersed boundary method(IBM)is implemented by introducing a virtual boundaryforce into the momentum equations to emulate the boundary conditions.This implementation enhances theability of the model to simulate interactions between waves and floating structures.A numerical case involvingwave interactions with a floating platform is studied to validate the numerical model.By simulating the wavepropagation,the numerical model captures the variation of the wave scattering very well,which verifies theperformance of the numerical model and the robust strategy of the IBM.

Scattering of Water Waves by Dual Symmetric Inclined Floating Porous Barriers Using the DBEM

The scattering of normally incident water waves by two surface-piercing inclined perforated barriers in water with a uniform finite depth is investigated within the framework of linear water wave theory.Considering that thin barriers are zero-thickness,a novel numerical method involving the the coupling of the dual boundary element method(DBEM)with damping layers is applied.In order to effectively damp out the reflected waves,two damping layers,instead of pseudoboundaries are implemented near the two side boundaries of the computational domain.Thus,the modified linearized free surface boundary conditions are formulated and used for solving both the ordinary boundary integral equation as well as the hypersingular boundary integral equation for degenerate boundaries.The newly developed numerical method is validated against analytical methods using the matched eigenfunction expansion method for the special case of two vertical barriers or the inclined angle to the vertical being zero.The influence of the length of the two damping layers has been discussed.Moreover,these findings are also validated against previous results for several cases.After validation,the numerical results for the reflection coefficient,transmission coefficient and dissipation coefficient are obtained by varying the inclination angle and porosity-effect parameter.The effects of both the inclination angle and the porosity on the amplitudes of wave forces acting on both the front and rear barriers are also investigated.It is found that the effect of the inclination angle mainly shifts the location of the extremal values of the reflection and the transmission coefficients.Additionally,a moderate value of the porosity-parameter is quite effective at dissipating wave energy and mitigating the wave loads on dual barriers.

Numerical Investigations on Transient Behaviours of Two 3-D Freely Floating Structures by Using a Fully Nonlinear Method

Two floating structures in close proximity are very commonly seen in offshore engineering. They are often subjected to steep waves and, therefore, the transient effects on their hydrodynamic features are of great concem. This paper uses the quasi arbitrary Lagrangian Eulerian finite element method （QALE-FEM）, based on the fully nonlinear potential theory （FNPT）, to numerically investigate the interaction between two 3-D floating structures, which undergo motions with 6 degrees of freedom （DOFs）, and are subjected to waves with different incident angles. The transient behaviours of floating structures, the effect of the accompanied structures, and the nonlinearity on the motion of and the wave loads on the structures are the main focuses of the study. The investigation reveals an important transient effects causing considerably larger structure motion than that in steady state. The results also indicate that the accompanied structure in close proximity enhances the interaction between different motion modes and results in stronger nonlinearity causing 2hal-order component to be of similar significance to the fundamental one.

An Integrated Structural Strength Analysis Method for Spar Type Floating Wind Turbine

An integrated structural strength analysis method for a Spar type floating wind turbine is proposed in this paper,and technical issues related to turbine structure modeling and stress combination are also addressed.The NREL-5MW ＂Hywind＂ Spar type wind turbine is adopted as study object.Time-domain dynamic coupled simulations are performed by a fully-coupled aero-hydro-servo-elastic tool,FAST,on the purpose of obtaining the dynamic characteristics of the floating wind turbine,and determining parameters for design load cases of finite element calculation.Then design load cases are identified,and finite element analyses are performed for these design load cases.The structural stresses due to wave-induced loads and wind-induced loads are calculated,and then combined to assess the structural strength of the floating wind turbine.The feasibility of the proposed structural strength analysis method for floating wind turbines is then validated.

A Novel Dynamics Analysis Method for Spar-Type Floating Offshore Wind Turbine

The dynamic behavior of floating offshore wind turbine (FOWT) is crucial for its design and optimization. A novel dynamics analysis method for the spar-type FOWT system is proposed in this paper based on the theorem of moment of momentum and the Newton’s second law. The full nonlinearity of the equations of motion (EOMs) and the full nonlinear coupling between external loads and the motions are preserved in this method. Compared with the conventional methods, this method is more transparent and it can be applied directly to the large-amplitude rotation cases. An in-house code is developed to implement this method. The capability of in-house code is verified by comparing its simulation results with those predicted by FAST. Based on the in-house code, the dynamic responses of a spar-type FOWT system are investigated under various conditions.

Design Methodology Research of the Floating Foundation for the Offshore MW-Rating Wind Turbine

With the rapid growth of the offshore wind industry, the innovative floating offshore wind turbine is chosen as the most feasible device to harvest the vast wind energy in deep water area. However there is no practical design guide for the floating wind turbine especially the floating foundation. In this paper, based on the investigation on the worldwide floating wind turbine and current available expertise on floating platforms accumulated in offshore O/G （oil and gas） industry, an integrated design methodology is presented according to the specialized characteristics of wind turbine, including the type selection of foundation and mooring system, design standard, design procedure, design conditions, key technologies involved. Finally a semi-submersible floating foundation is designed to support certain megawatt-rating wind turbine of Goldwind and also performance analysis and code checks are performed to validate the design. The design method of the floating foundation provided in this paper is proved feasible and can be adopted in practical engineering design.

Seismic Response of Submerged Floating Tunnel Tether

A mathematical equation for vibration of submerged floating tunnel tether under the effects of earthquake and parametric excitation is presented. Multi-step Galerkin method is used to simplify this equation and the fourth-order Runge-Kuta integration method is used for numerical analysis. Finally, vibration response of submerged floating tunnel tether subjected to earthquake and parametric excitation is analyzed in a few numerical examples. The results show that the vibration response of tether varies with the seismic wave type; the steady maximum mid-span displacement of tether subjected to seismic wave keeps constant when parametric resonance takes place; the transient maximum mid-span displacement of tether is related to the peak value of input seismic wave acceleration.

Wave Radiation and Diffraction by A Two-Dimensional Floating Body with An Opening Near A Side Wall

The radiation and diffraction problem of a two-dimensional rectangular body with an opening floating on a semi- infinite fluid domain of finite water depth is analysed based on the linearized velocity potential theory through an analytical solution procedure. The expressions for potentials are obtained by the method of variation separation, in which the unknown coefficients are determined by the boundary condition and matching requirement on the interface. The effects of the position of the hole and the gap between the body and side wall on hydrodynamic characteristics are investigated. Some resonance is observed like piston motion in a moon pool and sloshing in a closed tank because of the existence of restricted fluid domains.

Time Domain Simulation of Transient Responses of Very Large Floating Structures Under Unsteady External Loads

A time domain finite element method （FEM） for the analysis of transient elastic response of a very large floating structure （VLFS） subjected to arbitrary time-dependent external loads is presented. This method is developed directly in time domain and the hydrodynamic problem is formulated based on linear, inviscid and slightly compressible fluid theory and the structural response is analyzed on the thin plate assumption. The time domain finite element procedure herein is validated by comparing numerical results with available experimental data. Finally, the transient elastic response of a pontoon-type VLFS under the landing of an airplane is computed by the proposed time domain FEM. The time histories of the applied force and the position and velocity of an airplane during landing are modeled with data from a Boeing 747-400 jumbo jet.

Analysis of Responses of Floating Dual Pontoon Structure

A numerical model is developed by use of the boundary integral equation method to investigate the responses of a two-dimensional floating structure. The structure under consideration consisting of two pontoons, is connected by a rigid framework, and linked to the sea floor by a mooring system. The theoretical conception is based on potential theory with hnear external forces, and applied to an arbitrarily shaped body and water depth. The discussion includes the influence of draft and space between pontoons on the responses of the floating structure. Finally, the validity of the method is adequately verified by experimental results.

Structural Strength Analysis of a Tri-Floater Floating Foundation for Offshore VAWT

Vertical axis wind turbines(VAWTs) are advantageous for the development of large-scale offshore wind power because the drive system is located at the bottom of the turbine. This study investigates the structural strength of a tri-floater floating foundation supporting a 2.6 MW Darrieus VAWT. Finite element models of the floating foundation were developed using space plate-beam elements. The environmental loads, such as the aerodynamic loads, static wind loads, and wave-current loads, were considered. The general strengths of the floating foundation were calculated for the normal operating case(a cut-out wind speed of 25 m s^(-1) and blade rotation of 12 r min^(-1) were used to analyze the most unfavorable loads) and an extreme case(wind speed of 40 m s^(-1) and parked blades), and the weak components of the structure were analyzed. The results show that the floating foundation meets the strength requirements and the structural stress is highest when the wave, wind, and current are in a collinear direction. The main and secondary supporting bars transmit the loads between the stand columns and the tower foundation, and their stresses are higher than those in the other components. In the actual design, these supporting bars should be strengthened. The aerodynamic loads are very important and should be considered in the structural strength analysis of the floating foundation and the floating wind turbine system.

Side Wall Effects on the Hydrodynamics of a Floating Body by ImageGreen Function Based on TEBEM

A novel numerical model based on the image Green function and first-order Taylor expansion boundary element method(TEBEM), which can improve the accuracy of the hydrodynamic simulation for the non-smooth body, was developed to calculate the side wall effects on first-order motion responses and second-order drift loads upon offshore structures in the wave tank. This model was confirmed by comparing it to the results from experiments on hydrodynamic coefficients, namely the first-order motion response and second-order drift load upon a hemisphere, prolate spheroid, and box-shaped barge in the wave tank. Then,the hydrodynamics of the KVLCC2 model were also calculated in two wave tanks with different widths. It was concluded that this model can predict the hydrodynamics for offshore structures effectively, and the side wall has a significant impact on the firstorder quantities and second-order drift loads, which satisfied the resonant rule.

Prediction of the Mooring Force of a 2-D Floating Oil Storage Tank

A Constrained Interpolation Profile （CIP）-based model is developed to predict the mooring force of a two-dimensional floating oil storage tank under wave conditions, which is validated against to a newly performed experiment. In the experiment, a box-shaped floating oil storage apparatus is used. Computations are performed by an improved CIP-based Cartesian grid model, in which the THINC/SW scheme （THINC： tangent of hyperbola for interface capturing; SW： Slope Weighting）, is used for interface capturing. A multiphase flow solver is adopted to treat the water-air-body interactions. The Immersed Boundary Method （IBM） is implemented to treat the body surface. Main attention is paid to the sum force of mooring line and velocity field around the body. It is found that the sum force of the mooring line increases with increasing wave amplitude. The body suffers from water wave impact and large body motions occur near the free surface. The vortex occurs near the sharp edge, i.e., the sharp bottom comers of the float- ing oil storage tank and the vortex shedding can be captured by the present numerical model. The present model could be further improved by including turbulence model which is currently under development. Comparison between the computational mooring forces and the measured mooring forces is presented with a reasonable agreement. The developed numerical model can predict the mooring line forces very well.

Wave Drift Forces on Two Floating Bodies Arranged Side by Side

An innovative hydrodynamic theory and numerical model were developed to help improve the efficiency, accuracy, and convergence of the numerical prediction of wave drift forces on two side-by-side deepwater floating bodies. The wave drift forces were expressed by the double integration of source strength and the corresponding Green function on the body surface, which is consistent with the far field formula based on momentum conservation and sharing the advantage of near field calculations providing the drift force on each body. Numerical results were validated through comparing the general far field model and pressure integral model, as well as the middle field model developed usin^z the software HydroStar.

Scattering of Surface Water Waves Involving Semi-infinite Floating Elastic Plates on Water of Finite Depth

Two problems of scattering of surface water waves involving a semi-infinite elastic plate and a pair of semi-infinite elastic plates,separated by a gap of finite width,floating horizontally on water of finite depth,are investigated in the present work for a two-dimensional time-harmonic case.Within the frame of linear water wave theory,the solutions of the two boundary value problems under consideration have been represented in the forms of eigenfunction expansions.Approximate values of the reflection and transmission coefficients are obtained by solving an over-determined system of linear algebraic equations in each problem.In both the problems,the method of least squares as well as the singular value decomposition have been employed and tables of numerical values of the reflection and transmission coefficients are presented for specific choices of the parameters for modelling the elastic plates.Our main aim is to check the energy balance relation in each problem which plays a very important role in the present approach of solutions of mixed boundary value problems involving Laplace equations.The main advantage of the present approach of solutions is that the results for the values of reflection and transmission coefficients obtained by using both the methods are found to satisfy the energy-balance relations associated with the respective scattering problems under consideration.The absolute values of the reflection and transmission coefficients are presented graphically against different values of the wave numbers.

Wave Pressure Acting on V-Shaped Floating Breakwater in Random Seas

Wave pressure on the wet surface of a V-shaped floating breakwater in random seas is investigated. Considering the diffraction effect, the unit velocity potential caused by the single regular waves around the breakwater is solved using the finite-depth Green function and boundary element method, in which the Green function is solved by integral method. The Response-Amplitude Operator(RAO) of wave pressure is acquired according to the Longuet-Higgins' wave model and the linear Bernoulli equation. Furthermore, the wave pressure's response spectrum is calculated according to the wave spectrum by discretizing the frequency domain. The wave pressure's characteristic value corresponding to certain cumulative probability is determined according to the Rayleigh distribution of wave heights. The numerical results and field test results are compared, which indicates that the wave pressure calculated in random seas agrees with that of field measurements. It is found that the bigger angle between legs will cause the bigger pressure response, while the increase in leg length does not influence the pressure significantly. The pressure at the side of head sea is larger than that of back waves. When the incident wave angle changes from 0? to 90?, the pressure at the side of back waves decreases clearly, while at the side of head sea, the situation is more complicated and there seems no obvious tendency. The concentration of wave energy around low frequency(long wavelength) will induce bigger wave pressure, and more attention should be paid to this situation for the structure safety.

Nonlinear Time-Domain Theory for the Simulation of Moored Floating Body Motion

Nonlinear wave loads can induce low-frequency and high-frequency resonance motions of a moored platform in deep water. For the analysis of the nonlinear response of an offshore platform under the action of irregular waves, the most widely used method in practice is the Cummins method, in which the second-order exciting forces in the time domain are computed by a two-term Volterra series model based on incident waves, first-order body motion response, and quadratic transfer functions(QTFs). QTFs are bichromatic waves acting on a body and are computed in the frequency domain in advance. For moving bodies, QTFs are related to the first-order body response, which is to be determined in the simulation process of body motion response but is unknown in the computation procedure of QTFs. In solving this problem, Teng and Cong(2017) proposed a method to divide the QTFs into different components,which are unrelated to the body response. With the application of the new QTF components, a modified Cummins method can be developed for the simulation of the nonlinear response of a moored floating platform. This paper presents a review of the theory.

Floating zone growth and magnetic and specific heat properties of La0.67Ca0.33Mn1-xFexO3（x=0.00,0.04）single crystals

Single crystals of La0.67Ca0.33MnO3 and La0.67Ca0.33Mn0.96Fe0.04O3 were obtained by floating zone method. Laue diffraction pattern and rocking curve of the single crystals show that their quality is good. The magnetic behaviours of these compounds have been studied. Fe doping significantly depresses the magnetic contribution to the total specific heat Cp, but slightly influences the lattice contribution at temperatures above 50K. The peak of Cp shifts towards high temperatures with increasing magnetic field. Both single crystals exhibit the first-order magnetic transition around the Curie temperature.

Wave Radiation by a Floating Body in Water of Finite Depth Using an Exact DtN Boundary Condition

The present paper focuses on the wave radiation by an oscillating body with six degrees of freedom by using the DtN artifi-cial boundary condition.The artificial boundary is usually selected as a circle or spherical surface to solve various types of fields,such as sound waves or electromagnetic waves,provided that the considered domain is infinite or unbounded in all directions.However,the substantial wave motion is considered in water of finite depth,that is,the fluid domain is bounded vertically but unbounded horizon-tally.Thus,the DtN boundary condition is given on an artificial cylindrical surface,which divides the water domain into an interior and exterior region.The boundary integral equation is adopted to implement the present model.In the case of a floating cylinder,the results of hydrodynamic coefficients of a chamfer box are discussed.