The present paper deals with the optimum shape design of an absolutely rigid impactor which penetrates into a semi-infinite concrete shield. The objective function to maximize is the depth of penetration (DOP for shor...The present paper deals with the optimum shape design of an absolutely rigid impactor which penetrates into a semi-infinite concrete shield. The objective function to maximize is the depth of penetration (DOP for short) of the impactor;in the case of impactors with axisymmetric shapes DOP is calculated using formulas obtained by Ben-Dor et al. [1-3] with the method of local variations [4] and based on the mechanical model proposed by Forrestal and Tzou [5]. In the present paper we show that using a different class of admissible functions, more general than the axisymmetric one, better results can be obtained. To solve the formulated optimization problem we used a custom version of the particle swarm optimization method (briefly denoted by PSOA), a very recent numerical optimization algorithm of guided random global search. Numerical results show the optimal shape for various types of shields and corresponding DOP;some Ben-Dor et al. [1-3] results are compared to solutions obtained.展开更多
Ambient suspended particulate matter(PM)(primarily with particle diameter 2.5m or less,i.e.,PM2.5)can adversely affect ecosystems and human health.Currently,optical particle sensors based on light scattering dominate ...Ambient suspended particulate matter(PM)(primarily with particle diameter 2.5m or less,i.e.,PM2.5)can adversely affect ecosystems and human health.Currently,optical particle sensors based on light scattering dominate the portable PM sensing market.However,the light scattering method has poor adaptability to different-sized PM and adverse environmental conditions.Here,we design and develop a portable PM sensing microsystem that consists of a micromachined virtual impactor(VI)for particle separation,a thermophoretic deposition chip for particle collection,and an extended-gate field-effect transistor(FET)for particle analysis.This system can realize on-site separation,collection,and analysis of aerosol particles without being influenced by environmental factors.In this study,the design of the VI is thoroughly analyzed by numerical simulation,and mixtures of different-sized silicon dioxide(SiO2)particles are used in an experimental verification of the performance of the VI and FET.Considering the low cost and compact design of the whole system,the proposed PM analysis microsystem has potential for PM detection under a wide range of conditions,such as heavily polluted industrial environments and for point-of-need outdoor and indoor air quality monitoring.展开更多
Percussive-rotary drilling technology was considered many years ago as one of the best approaches for hard rock drilling. It is a key for popularizing this technology on a large scale to design and make an impactor wi...Percussive-rotary drilling technology was considered many years ago as one of the best approaches for hard rock drilling. It is a key for popularizing this technology on a large scale to design and make an impactor with excellent performance. This paper presents a suit of method to design the percussive parameters for the oil or gas field by introducing the working principle of back-pressurod impactor, dividing the working periods of impaetor into three phases and establishing the computer emuiational model of percussive parameters. It draws a comparison between the results of model calenlation and experiment on the basis of analyzing the experiment results of impactor. The conclude provides credible foundation for designing and further ameliorating the impactor.展开更多
Based on analysis of the present hydraulic impactor, a new hydraulic impactor with pressure feedback control was developed, whose structure and operation principle were introduced. The results show that the pressure o...Based on analysis of the present hydraulic impactor, a new hydraulic impactor with pressure feedback control was developed, whose structure and operation principle were introduced. The results show that the pressure of the impact system can be adjusted steplessly to change the impact energy of the impactor steplessly. By adjusting the oil flow of supply pump steplessly, the impact frequency will also be changed steplessly. So the impact energy and frequency of the new impactor can be adjusted independently and steplessly. In order to decrease the energy loss, a new kind of sleeve valve has been designed, which has features of little leakage, little pressure loss and low energy cost. The new type hydraulic impactor can be operated under various conditions with decreased energy consumption and improved operation efficiency.展开更多
文摘The present paper deals with the optimum shape design of an absolutely rigid impactor which penetrates into a semi-infinite concrete shield. The objective function to maximize is the depth of penetration (DOP for short) of the impactor;in the case of impactors with axisymmetric shapes DOP is calculated using formulas obtained by Ben-Dor et al. [1-3] with the method of local variations [4] and based on the mechanical model proposed by Forrestal and Tzou [5]. In the present paper we show that using a different class of admissible functions, more general than the axisymmetric one, better results can be obtained. To solve the formulated optimization problem we used a custom version of the particle swarm optimization method (briefly denoted by PSOA), a very recent numerical optimization algorithm of guided random global search. Numerical results show the optimal shape for various types of shields and corresponding DOP;some Ben-Dor et al. [1-3] results are compared to solutions obtained.
基金supported by the National Natural Science Foundation of China(Nos.91743110,61674114,and 21861132001)the National Key R&D Program of China(Nos.2017YFF0204604 and 2018YFE0118700)+1 种基金Tianjin Applied Basic Research and Advanced Technology(No.17JCJQJC43600),the“111”Project(No.B07014)the Foundation for Talent Scientists of Nanchang Institute for Micro-technology of Tianjin University.
文摘Ambient suspended particulate matter(PM)(primarily with particle diameter 2.5m or less,i.e.,PM2.5)can adversely affect ecosystems and human health.Currently,optical particle sensors based on light scattering dominate the portable PM sensing market.However,the light scattering method has poor adaptability to different-sized PM and adverse environmental conditions.Here,we design and develop a portable PM sensing microsystem that consists of a micromachined virtual impactor(VI)for particle separation,a thermophoretic deposition chip for particle collection,and an extended-gate field-effect transistor(FET)for particle analysis.This system can realize on-site separation,collection,and analysis of aerosol particles without being influenced by environmental factors.In this study,the design of the VI is thoroughly analyzed by numerical simulation,and mixtures of different-sized silicon dioxide(SiO2)particles are used in an experimental verification of the performance of the VI and FET.Considering the low cost and compact design of the whole system,the proposed PM analysis microsystem has potential for PM detection under a wide range of conditions,such as heavily polluted industrial environments and for point-of-need outdoor and indoor air quality monitoring.
基金Supported by the Science Foundation of China National Petroleum Corporation (990407 - 06 - 02)
文摘Percussive-rotary drilling technology was considered many years ago as one of the best approaches for hard rock drilling. It is a key for popularizing this technology on a large scale to design and make an impactor with excellent performance. This paper presents a suit of method to design the percussive parameters for the oil or gas field by introducing the working principle of back-pressurod impactor, dividing the working periods of impaetor into three phases and establishing the computer emuiational model of percussive parameters. It draws a comparison between the results of model calenlation and experiment on the basis of analyzing the experiment results of impactor. The conclude provides credible foundation for designing and further ameliorating the impactor.
文摘Based on analysis of the present hydraulic impactor, a new hydraulic impactor with pressure feedback control was developed, whose structure and operation principle were introduced. The results show that the pressure of the impact system can be adjusted steplessly to change the impact energy of the impactor steplessly. By adjusting the oil flow of supply pump steplessly, the impact frequency will also be changed steplessly. So the impact energy and frequency of the new impactor can be adjusted independently and steplessly. In order to decrease the energy loss, a new kind of sleeve valve has been designed, which has features of little leakage, little pressure loss and low energy cost. The new type hydraulic impactor can be operated under various conditions with decreased energy consumption and improved operation efficiency.
