Honghuagang District,Zunyi City,Guizhou Province,develops the characteristic industry of crispy peaches,and at the same time develops the forest economy and promotes the model of planting soybeans in peach orchards to...Honghuagang District,Zunyi City,Guizhou Province,develops the characteristic industry of crispy peaches,and at the same time develops the forest economy and promotes the model of planting soybeans in peach orchards to promote rural revitalization.However,due to the different pests and diseases occurring in peach trees and soybeans,the control drugs used are also different,and the existing technology for spraying and controlling peach or soybean seedlings is operated separately and cannot be sprayed together at the same time.This study,based on the actual situation of forest land,develops a spraying device for interplantation in forest(peach tree and soybean)from the aspects of technical solutions,working principles and beneficial effects,in order to solve the problem of low spraying efficiency of spraying control of peach tree or soybean seedlings in the existing technology.展开更多
A new method of electrical discharge machining （EDM） in air-mixed medium--air-mixed EDM was presented, and comparative experiments were carried out to compare the machining characteristics of air-mixed EDM with conv...A new method of electrical discharge machining （EDM） in air-mixed medium--air-mixed EDM was presented, and comparative experiments were carried out to compare the machining characteristics of air-mixed EDM with conventional EDM. The experimental results showed that better machining performances were obtained with tool electrode as the cathode and workpieee as the anode. It was found that the material removal rate （MRR） was higher, the tool electrode relative wear ratio （TWR） was lower and the surface roughness （SR） quality was better in the case of air-mixed EDM than that of conventional EDM, and the reasons bringing out the results were analyzed.展开更多
The current study of minimum quantity lubrication(MQL)concentrates on its performance improvement.By contrast with nanofluid MQL and electrostatic atomization(EA),the proposed nanofluid composite electrostatic sprayin...The current study of minimum quantity lubrication(MQL)concentrates on its performance improvement.By contrast with nanofluid MQL and electrostatic atomization(EA),the proposed nanofluid composite electrostatic spraying(NCES)can enhance the performance of MQL more comprehensively.However,it is largely influenced by the base fluid of external fluid.In this paper,the lubrication property and machining performance of NCES with different types of vegetable oils(castor,palm,soybean,rapeseed,and LB2000 oil)as the base fluids of external fluid were compared and evaluated by friction and milling tests under different flow ratios of external and internal fluids.The spraying current and electrowetting angle were tested to analyze the influence of vegetable oil type as the base fluid of external fluid on NCES performances.The friction test results show that relative to NCES with other vegetable oils as the base fluids of external fluid,NCES with LB2000 as the base fluid of external fluid reduced the friction coefficient and wear loss by 9.4%-27.7%and 7.6%-26.5%,respectively.The milling test results display that the milling force and milling temperature for NCES with LB2000 as the base fluid of external fluid were 1.4%-13.2%and 3.6%-11.2%lower than those for NCES with other vegetable oils as the base fluids of external fluid,respectively.When LB2000/multi-walled carbon nanotube(MWCNT)water-based nanofluid was used as the external/internal fluid and the flow ratio of external and internal fluids was 2:1,NCES showed the best milling performance.This study provides theoretical and technical support for the selection of the base fluid of NCES external fluid.展开更多
The technology for spraying a sintering bed and thus improving sinter quality indicators while reducing the emission of flue gas pollutants has recently become an important research topic.The impacts on sinter quality...The technology for spraying a sintering bed and thus improving sinter quality indicators while reducing the emission of flue gas pollutants has recently become an important research topic.The impacts on sinter quality and emissions when spraying the sintering surface with different amounts and flow rates of steam were investigated in this study.The sinter quality indicators were most effectively improved by spraying 180 g of steam flow continuously at a rate of 0.02 m^(3)/min for 15 min after ignition for 8 min.The optimal effect on emission reduction was obtained by spraying 90 g of steam flow continuously at a rate of 0.01 m^(3)/min for 15 min after ignition for 8 min.展开更多
基金Supported by Zunyi City Municipal and University Joint Science and Technology R&D Funding Project(HZ2023159)Zunyi Science and Technology Support Program Project(NS2023015)+2 种基金Guizhou Provincial Science and Technology Commissioner Innovation and Entrepreneurship Service Training Demonstration Base(HHG2023001)Guizhou Provincial Department of Education Natural Science Research Project(Qianjiaotongqi[2022]No.067)Natural Science Research Program of Guizhou Provincial Department of Education(Guizhou Education and Technology[2023]043).
文摘Honghuagang District,Zunyi City,Guizhou Province,develops the characteristic industry of crispy peaches,and at the same time develops the forest economy and promotes the model of planting soybeans in peach orchards to promote rural revitalization.However,due to the different pests and diseases occurring in peach trees and soybeans,the control drugs used are also different,and the existing technology for spraying and controlling peach or soybean seedlings is operated separately and cannot be sprayed together at the same time.This study,based on the actual situation of forest land,develops a spraying device for interplantation in forest(peach tree and soybean)from the aspects of technical solutions,working principles and beneficial effects,in order to solve the problem of low spraying efficiency of spraying control of peach tree or soybean seedlings in the existing technology.
基金the Post-doctor Foundation of Heilongjiang Province(Grant No.LBH-Z06139).
文摘A new method of electrical discharge machining （EDM） in air-mixed medium--air-mixed EDM was presented, and comparative experiments were carried out to compare the machining characteristics of air-mixed EDM with conventional EDM. The experimental results showed that better machining performances were obtained with tool electrode as the cathode and workpieee as the anode. It was found that the material removal rate （MRR） was higher, the tool electrode relative wear ratio （TWR） was lower and the surface roughness （SR） quality was better in the case of air-mixed EDM than that of conventional EDM, and the reasons bringing out the results were analyzed.
基金Supported by National Natural Science Foundation of China(Grant Nos.52175411 and 51205177)Jiangsu Provincial Natural Science Foundation(Grant Nos.BK20171307 and BK2012277).
文摘The current study of minimum quantity lubrication(MQL)concentrates on its performance improvement.By contrast with nanofluid MQL and electrostatic atomization(EA),the proposed nanofluid composite electrostatic spraying(NCES)can enhance the performance of MQL more comprehensively.However,it is largely influenced by the base fluid of external fluid.In this paper,the lubrication property and machining performance of NCES with different types of vegetable oils(castor,palm,soybean,rapeseed,and LB2000 oil)as the base fluids of external fluid were compared and evaluated by friction and milling tests under different flow ratios of external and internal fluids.The spraying current and electrowetting angle were tested to analyze the influence of vegetable oil type as the base fluid of external fluid on NCES performances.The friction test results show that relative to NCES with other vegetable oils as the base fluids of external fluid,NCES with LB2000 as the base fluid of external fluid reduced the friction coefficient and wear loss by 9.4%-27.7%and 7.6%-26.5%,respectively.The milling test results display that the milling force and milling temperature for NCES with LB2000 as the base fluid of external fluid were 1.4%-13.2%and 3.6%-11.2%lower than those for NCES with other vegetable oils as the base fluids of external fluid,respectively.When LB2000/multi-walled carbon nanotube(MWCNT)water-based nanofluid was used as the external/internal fluid and the flow ratio of external and internal fluids was 2:1,NCES showed the best milling performance.This study provides theoretical and technical support for the selection of the base fluid of NCES external fluid.
文摘The technology for spraying a sintering bed and thus improving sinter quality indicators while reducing the emission of flue gas pollutants has recently become an important research topic.The impacts on sinter quality and emissions when spraying the sintering surface with different amounts and flow rates of steam were investigated in this study.The sinter quality indicators were most effectively improved by spraying 180 g of steam flow continuously at a rate of 0.02 m^(3)/min for 15 min after ignition for 8 min.The optimal effect on emission reduction was obtained by spraying 90 g of steam flow continuously at a rate of 0.01 m^(3)/min for 15 min after ignition for 8 min.
