Seasonal variations of air-sea heat fluxes and sea surface temperature in the northwestern Pacific marginal seas

Using a net surface heat flux （Qnet） product obtained from the objectively analyzed air-sea fluxes （OAFlux） project and the international satellite cloud climatology project （ISCCP）, and temperature from the simple ocean data assimilation （SODA）, the seasonal variations of the air-sea heat fluxes in the northwestern Pa cific marginal seas （NPMS） and their roles in sea surface temperature （SST） seasonality are studied. The seasonal variations of Qnet, which is generally determined by the seasonal cycle of latent heat flux （LH）, are in response to the advection-induced changes of SST over the Kuroshio and its extension. Two dynamic regimes are identified in the NPMS： one is the area along the Kuroshio and its extension, and the other is the area outside the Kuroshio. The oceanic thermal advection dominates the variations of SST and hence the sea-air humidity plays a primary role and explains the maximum heat losing along the Kuroshio. The heat transported by the Kuroshio leads to a longer period of heat losing over the Kuroshio and its Extension. Positive anomaly of heat content corresponds with the maximum heat loss along the Kuroshio. The oceanic advection controls the variations of heat content and hence the surface heat flux. This study will help us understand the mechanism controlling variations of the coupled ocean-atmosphere system in the NPMS. In the Kuroshio region, the ocean current controls the ocean temperature along the main stream of the Ku roshio, and at the same time, forces the air-sea fluxes.

Validation of NCEP and OAFlux air-sea heat fluxes using observations from a Black Pearl wave glider

Latent and sensible heat fluxes based on observations from a Black Pearl wave glider were estimated along the main stream of the Kuroshio Current from the East China Sea to the east coast of Japan,from December 2018 to January 2019.It is found that the data obtained by the wave glider were comparable to the sea surface temperature data from the Operational Sea Surface Temperature and Sea Ice Analysis and the wind field data from WindSat.The Coupled Ocean Atmosphere Response Experiment 3.0(COARE 3.0)algorithm was used to calculate the change in air-sea turbulent heat flux along the Kuroshio.The averaged latent heat flux(LHF)and sensible heat flux(SHF)were 235 W/m^(2)and 134 W/m^(2),respectively,and the values in the Kuroshio were significant larger than those in the East China Sea.The LHF and SHF obtained from Objectively Analyzed Air-Sea Fluxes for the Global Oceans(OAFlux)were closer to those measured by the wave glider than those obtained from National Centers for Environmental Prediction(NCEP)reanalysis products.The maximum deviation occurred in the East China Sea and the recirculation zone of the Kuroshio(deviation of SHF>200 W/m^(2);deviation of LHF>400 W/m^(2)).This indicates that the NCEP and OAFlux products have large biases in areas with complex circulation.The wave glider has great potential to observe air-sea heat fluxes with a complex circulation structure.

Model calculation of air-sea heat fluxes over ocean area near China with GEOS DAS system

The sensible and latent heat fluxes over the ocean area near China were calculated and analyzed by usingthe Goddard Earth Observing System (GEOS) - four-dimensional Data Assimilation System (DAS). The calculated results showed that the sensible heat flux had its large value in winter and autumn , small value in spring and summer overthe ocean area near China. In winter, the sensible heat flux increased distinctly with latitude, and its isolines were verycrowded. Over the ocean area east of Taiwan Province and south of Japan, the direction of isoline was from southwestto northeast. In the South China Sea the sensible heat flux was lower than that of surrounding ocean areas,and its isoline was distributed into a type of an inverted trough. In autumn and winter, the maximum center of latent heat flux appeared over the ocean area northeast of Taiwan Province and south and southeast of Japan, meanwhile, the isoline wasin the direction of southwest to northeast. In spring and summer, the latent heat flux had minimum value in the Huanghai Sea. At the same time, the maximum value center of latent heat flux appeared over the ocean area south of Japan inspring.

A study of geographical distributions and temporal variations of air-sea heat fluxes over the Pacific

temporal variations and geographical distributions of sensible and latent heat fluxes over the Pacific were calculated and analyzed by using the Goddard Earth Observing System (GEOS) - four-dimensional Data Assimilation System (DAS). The calculated results showed that the heat flux over the northwestern Pacific varied obviously with seasons, but over the other ocean areas of the Pacific O cean there were no such phenomena. There was always the highest Value region of latent heat fluxes over the Pacific Ocean, but the values of sensible heat fluxes were often very small except over the ocean area north of 20°N and there was not highest value region at all. The latent heat fluxes had different distribu tions with longitude in different latitudes. And the variations of latent heat fluxes with latitude were not the same in different longitude and also it varied with seasons.

Response of the South China Sea summer monsoon onset to air-sea heat fluxes over the Indian Ocean

We objectively define the onset date of the South China Sea (SCS) summer monsoon, after having evaluated previous studies and considered various factors. Then, interannual and interdecadal characteristics of the SCS summer monsoon onset are analyzed. In addition, we calculate air-sea heat fluxes over the Indian Ocean using the advanced method of CORARE3.0, based on satellite remote sensing data. The onset variation cycle has remarkable interdecadal variability with cycles of 16 a and 28 a. Correlation analysis between air-sea heat fluxes in the Indian Ocean and the SCS summer monsoon indicates that there is a remarkable lag correlation between them. This result has important implications for prediction of the SCS summer monsoon, and provides a scientific basis for further study of the onset process of this monsoon and its prediction. Based on these results, a linear regression equation is obtained to predict the onset date of the monsoon in 2011 and 2012. The forecast is that the onset date of 2011 will be normal or 1 pentad earlier than the normal year, while the onset date in 2012 will be 1-2 pentads later.

Variation of Air-Sea Heat Fluxes over the Western Pacific Warm Pool Area and Its Relationship with the South China Sea Summer Monsoon Onset

Based on oceanic and atmospheric parameters retrieved by satellite remote sensing using a neural network method, air-sea heat fluxes over the western Pacific warm pool area were calculated with the advanced the advanced Coupled Ocean-Atmosphere Response Experiment 3.0 (COARE3.0) bulk algorithm method. Then, the average annual and interannual characteristics of these fluxes were analyzed. The rela- tionship between the fluxes and the South China Sea (SCS) summer monsoon onset is highlighted. The results indicate that these fluxes have clear temporal and spatial characteristics. The sensible heat flux is at its maximum in the Kuroshio area, while the latent heat flux is at its maximum in the North Equatorial Current and Kuroshio area. The distribution of average annual air-sea heat fluxes shows that both sensible and latent heat fluxes are maximized in winter and minimized in summer. The air-sea heat fluxes have obvious interannual variations. Correlation analysis indicates a close lag-correlation between air-sea heat fluxes in the western Pacific warm pool area and at the SCS summer monsoon onset. The lagcorrelation can therefore predict the SCS summer monsoon onset, providing a reference for the study of precipitation related to the monsoon.

Sea spray induced air-sea heat and salt fluxes based on the wavesteepnessdependent sea spray model

Sea spray,which comprises amounts of small ocean droplets,plays a significant role in the air-sea coupling,atmospheric and oceanic dynamics,and climate.However,it remains arduous to arrive at estimates for the efficiency and accuracy of the sea spray induced air-sea heat and salt fluxes.This is because the microphysical process of sea spray evolution in the air is of extreme complexity.In this study,we iteratively calculated the sea spray induced air-sea heat and salt fluxes at various weather condition.To do so,we implemented one novel wave-steepness-dependent sea spray model into a bulk air-sea fluxes algorithm and utilized other sea spray models as comparisons.Based on the improved wave-dependent bulk turbulent algorithm,we observed that despite the negative contribution of sea spray to the sensible heat fluxes,the sea spray positively contributes to the air-sea latent heat fluxes,leading to an overall increase in the total air-sea heat fluxes.The additional heat fluxes caused by sea spray may be the missing critical process that can clarify the discrepancies observed between measured and modelled Tropical Cyclone’s development and intensification.In addition to heat fluxes,we observed that sea spray has significant impacts on the air-sea salt fluxes.As the sea salt particles are one of the main sources of the atmosphere aerosol,our results imply that sea spray could impact global and regional climate.Thus,given the significance of sea spray on the air-sea boundary layer,sea spray effects need to be considered in studies of air-sea interaction,dynamics of atmosphere and ocean.

Hydrographic Characteristics and Oceanic Heat Flux in the Upper Arctic Ocean over the Alpha Ridge Observed by the DTOP Platform in 2018 and 2021

In 2018 and 2021,the Drift-Towing Ocean Profilers(DTOP)provided extensive temperature and salinity data on the upper 120m ocean through their drifts over the Alpha Ridge north of the Canada Basin.The thickness and temperature maximum of Alaska Coastal Water(ACW)ranged from 20m to 40m and-1.5℃to-0.8℃,respectively,and the salinity generally maintained from 30.2 to 32.5.Comparison with World Ocean Atlas 2018’s climatology manifested a 40m-thick and warm ACW roughly ex-ceeding the temperature maximum by 0.4–0.5℃in June–August 2021.This anomalously warm ACW was highly related to the ex-pansion of the Beaufort Gyre in the negative Arctic Oscillation phase.During summer,the under-ice oceanic heat flux F_(w)^(OHF)was elevated,with a maximum value of above 25Wm^(-2).F_(w)^(OHF)was typically low in the freezing season,with an average value of 1.2Wm^(-2).The estimates of upward heat flux contributed by ACW to the sea ice bottom F_(w)^(OHF)were in the range of 3–4Wm^(-2)in June–August 2021,when ACW contained a heat content of more than 80MJm^(-2).The heat loss over this period was driven by a weak stratification upon the ACW layer associated with a surface mixed layer(SML)approaching the ACW core.After autumn,F_(w)^(OHF)was reduced(<2 Wm^(-2))except during rare events when it elevated F_(w)^(OHF)slightly.In addition,the intensive and widespread Ekman suction,which created a violent upwelling north of the Canada Basin,was largely responsible for the substantial cooling and thinning of the ACW layer in the summer of 2021.

Optimum Profiles of Endwall Contouring for Enhanced Net Heat Flux Reduction and Aerodynamic Performance

Successfully utilized non-axisymmetric endwalls to enhance turbine efficiencies(aerodynamic and turbine inlet temperatures)by controlling the characteristics of the secondary flow in a blade passage.This is accomplished by steady-state numerical hydrodynamics and deep knowledge of the field of flow.Because of the interaction between mainstream and purge flow contributing supplementary losses in the stage,non-axisymmetric endwalls are highly susceptible to the inception of purge flow exit compared to the flat and any advantage rapidly vanishes.The conclusions reveal that the supreme endwall pattern could yield a lowering of the gross pressure loss at the design stage and is related to the size of the top-loss location being productively lowered.This has led to diminished global thermal exchange lowered in the passage of the vane alone.The reverse flow adjacent to the suction side corner of the endwall is migrated farther from the vane surface,as the deviated pressure spread on the endwall accelerates the flow and progresses the reverse flow core still downstream.The depleted association between the tornado-like vortex and the corner vortex adjacent to the suction side corner of the endwall is the dominant mechanism of control in the contoured end wall.In this publication,we show that the non-axisymmetric endwall contouring by selective numerical shape change method at most prominent locations is advantageous in lowering the thermal load in turbines to augment the net heat flux reduction as well as the aerodynamic performance using multi-objective optimization.

Impact of Cattaneo-Christov Heat Flux in the Nanofluid Flow over an Inclined Permeable Surface with Irreversibility Analysis

This study discusses the magnetohydrodynamic nanofluid flow over an inclined permeable surface influenced by mixed convection, and Cattaeo-Christov heat flux. The heat transfer analysis is performed in the presence of a heat source/sink and thermal stratification. To gauge the energy loss during the process, an irreversibility analysis is also performed. A numerical solution to the envisaged problem is obtained using the bvp4c package of MATLAB. Graphs are drawn to assess the consequences of the arising parameters against the associated profiles. The results show that an augmentation in the magnetic field and nanomaterial volume fraction results in an enhancement in the temperature profile. A strong magnetic field can significantly reduce the fluid velocity. The behavior of the Skin friction coefficient against the different estimates of emerging parameters is discussed. .

An improved algorithm of simulation on air-sea turbulent heat fluxes in China seas

With a global GSSTF2 and NCEP/NCAR reanalysis database and observation data at the Yong Xing station of Xisha Island in the South China Sea, we simulated the turbulent sensible and latent heat flux at sea surface in Chinese and neighboring seas (hereafter termed as China seas) using a common bulk method with some improved parameters. Comparing the simulated results with the observed and reanalyzed data, the improvement yielded higher accuracy, a smaller mean square deviation within 10 W/m2, and a smaller average relative error at about 25%. In addition, spatial resolution was improved to 0.1°×0.1°. The simulation is able to replay the main features of regional and seasonal variation in turbulent heat fluxes, and also the general pattern of heat flux changes during the summer monsoon outbreak in the South China Sea.

A Comparison Study of the Climatological Air-Sea Heat Fluxes Estimated by Different Computational Schemes of Bulk Formula

In this paper the different results of estimated air-sea heat fluxes by different computational schemes of bulk formula are researched. The varying results may bring another source of the uncertainties of flux climatology. In addition to the classical scheme and the sampling scheme, a revised sampling scheme named semi-sampling scheme is proposed in this paper. In this revised version, the monthly means of (qs- qa)W and (Ts- Ta)W are calculated from each simultaneous measurement as that in the sampling method. But the transfer coefficients in this version are defined based on monthly means of W and instead of those in each measurement in order to use the files of monthly mean variables and in COADS (Woodruff et al. 1987).The results of a comparison study show that the covariance between (Ts - Ta )' and W' and that betWeen (qs- qa)' and W/ are less than 2 W / m2 and 5 W / m2 respectively in most areas, which are about one order of magnitude less than the standard deviation of the fluxes. Therefore the difference betWeen tWo schemes is not statishcally significant on average. However, in the regions off coast of Asian and North American continents, the contribuhon of covariance between (qs - qa )' and W' can be as large as 15 W / m2, which is about one third to a half of the standard deviation. Since there are files of monthly mean (qs - qa)W and (Ts- Ta)W for each year in the COADS. we propose to use these files directly in calculation of climatology. It is not necessary to use every individual report. The flux climatology calculated directly from the long-term mean values of basic meteorological elements shows an significant difference from that calculated from the mean of each year's flux, particularly for the latent heat flux which is on the order of 10 to 15 W / m2, about 3-4 times of the difference between semi-sampling and classical schemes and about one third of the standard deviation. Therefore it indicates that the time nit6rval of months is perhaps a better one in the calculation of flux climatology. It is not recommended to use the long--term means of the met6orological variables.

Air-sea heat flux exchange over the South China Sea under different weather conditions before and after southwest monsoon onset in 2000

With the data observed from the Second SCS Air-Sea Flux Experiment on the Xisha air-sea flux research tower, the radiation budget, latent, sensible heat fluxes and net oceanic heat budgets were caculated before and after summer monsoon onset. It is discovered that, after summer monsoon onset, there are considerable changes in air-sea fluxes, especially in latent heat fluxes and net oceanic heat budget. Furthermore, the analyzed results of five synoptic stages are compared. And the characteristics of the flux transfer during different stages around onset of South China Sea monsoon are discussed. The flux change shows that there is an oceanic heat accumulating process during the pre-onset and the break period, as same as oceanic heat losing process during the onset period. Moreover, latent fluxes, the water vapor moving to the continent, even the rainfall appearance in Chinese Mainland also can be influenced by southwester. Comparing Xisha fluxes with those obtained from the Indian Ocean and the western Pacific Ocean, their differences may be observed. It is the reason why SSTs can keep stable over the South China Sea while they decrease quickly over the Arabian Sea and the Bay of Bengal after monsoon onset.

A primary study of the correlation between the net air-sea heat flux and the interannual variation of western North Pacific tropical cyclone track and intensity

A singular value decomposition （SVD） analysis is carried out to reveal the relationship between the interannual variation of track and intensity of the western North Pacific tropical cyclones （WNPTCs） in the tropical cyclone （TC） active season （July–November） and the global net air-sea heat flux （Q net ） in the preceding season （April–June）. For this purpose, a tropical cyclone track and intensity function （TIF） is defined by a combination of accumulated cyclone energy （ACE） index and a cyclone track density function. The SVD analysis reveals that the first mode is responsible for the positive correlation between the upward heat flux in the tropical central Pacific and the increased activity of western North Pacific （WNP） TIF, the second mode for the positive correlation between the upward heat flux in the North Indian Ocean and the northeastward track shift of WNPTCs and the third mode for the negative correlation between the upward heat flux in mid-latitude central Pacific and the northwest displacement of the WNP TC-active center. This suggests that Q net anomalies in some key regions have a substantial remote impact on the WNP TC activity.

Estimating Heat Fluxes by Merging Profile Formulae and the Energy Budget with a Variational Technique

A variational technique (VT) is applied to estimate surface sensible and latent heat fluxes based on observations of air temperature, wind speed, and humidity, respectively, at three heights (1 m, 4 m, and 10 m), and the surface energy and radiation budgets by the surface energy and radiation system (SERBS). The method fully uses all information provided by the measurements of air temperature, wind, and humidity profiles, the surface energy budget, and the similarity profile formulae as well. Data collected at Feixi experiment station installed by the China Heavy Rain Experiment and Study (HeRES) Program are used to test the method. Results show that the proposed technique can overcome the well-known unstablility problem that occurs when the Bowen method becomes singular; in comparison with the profile method, it reduces both the sensitivities of latent heat fluxes to observational errors in humidity and those of sensible heat fluxes to observational errors in temperature, while the estimated heat fluxes approximately satisfy the surface energy budget. Therefore, the variational technique is more reliable and stable than the two conventional methods in estimating surface sensible and latent heat fluxes.

Parameterization of Heat Fluxes at Heterogeneous Surfaces by Integrating Satellite Measurements with Surface Layer and Atmospheric Boundary Layer Observations

The regional heat flux exchange between heterogeneous landscapes and the nearby surface layer （SL） is a key issue in the study of land-atmosphere interactions over arid areas such as the Heihe River basin in northwestern China and in high elevation areas such as the Tibetan Plateau. Based on analysis of the land surface heterogeneity and its effects on the overlying air flow, the use of SL observations, atmospheric boundary layer （ABL） observations, and satellite remote sensing （RS） measurements along with three parameterization methodologies （here, termed as the RS, tile, and blending approaches） have been proposed to estimate the surface heat flux densities over heterogeneous landscapes. The tile and blending approaches have also been implemented during HEIhe basin Field Experiment （HEIFE）, the Coordinated Enhanced Observing Period （CEOP） Asia-Australia Monsoon Project on the Tibetan Plateau （CAMP/Tibet）, the Arid Environment Comprehensive Monitoring Plan ＇95 （AECMP＇95）, and the DunHuang Experiment （DHEX）. The results showed that these two proposed parameterization methodologies can be accurately used over heterogeneous land surfaces.

Numerical Study of Impacts of Soil Moisture on the Diurnal and Seasonal Cycles of Sensible/Latent Heat Fluxes over Semi-arid Region

The semi-arid regions, as climatic and ecosystem transitional zones, are the most vulnerable to global environmental change. Earlier researches indicate that the semi-arid regions are characterized by strong landatmosphere coupling in which soil moisture is the crucial variable in land surface processes. In this paper, we investigate the sensitivity of the sensible/latent heat fluxes to soil moisture during the growing season based on the enhanced observations at Tongyu in the Jilin province of China, a reference site of international Coordinated Energy and Water Cycle Observations Project （CEOP） in the semi-arid regions, by using a sophisticated land surface model （NCAR_CLM3.0）. Comparisons between the observed and simulated sensible/latent heat fluxes indicate that the soil moisture has obvious effects on the sensible/latent heat fluxes in terms of diurnal cycle and seasonal evolution. Better representation of the soil moisture could improve the model performance to a large degree. Therefore, for the purpose of simulating the land-atmosphere interaction and predicting the climate and water resource changes in semi-arid regions, it is necessary to enhance the description of the soil moisture distribution both in the way of observation and its treatment in land surface models.

Modelling Air-Sea Fluxes during a Western Pacific Typhoon:Role of Sea Spray

It has long been recognized that the evolution of marine storms may be strongly affected by the flux transfer processes over the ocean. High winds in a storm can generate large amounts of spray, which can modify the transfer of momentum, heat, and moisture across the air-sea interface. However, the role of sea spray and air-sea processes in western Pacific typhoons has remained elusive. In this study, the impact of sea spray on air-sea fluxes and the evolution of a typhoon over the western Pacific is investigated using a coupled atmosphere-sea-spray modeling system. Through the case study of the recent Typhoon Fengshen from 2002, we found that: (1) Sea spray can cause a significant latent heat flux increase of up to 40% of the interfacial fluxes in the typhoon; (2) Taking into account the effects of sea spray, the intensity of the modeled typhoon can be increased by 30% in the 10-m wind speed, which may greatly improve estimates of storm maximum intensity and, to some extent, improve the simulations of overall storm structure in the atmospheric model; (3) The effects of sea spray are mainly focused over the high wind regions around the storm center and are mainly felt in the lower part of the troposphere.

The partial pressure of carbon dioxide and air-sea fluxes in the Changjiang River Estuary and adjacent Hangzhou Bay

The distributions of partial pressure of carbon dioxide （pCO2） in the surface waters of the Changjiang River Estuary and adjacent Hangzhou Bay were examined in the summer of 2010. Surface water pCO2 ranged from 751-2 095/zatm （1 atm=101 325 Pa） in the inner estuary, 177-1 036/zatm in the outer estuary, and 498-1 166 μatm in Hangzhou Bay. Overall, surface pCO2 behaved conservatively during the estuary mixing. In the inner estuary, surface pCO2 was relatively high due to urbanized pollution and a high respiration rate. The lowest pCO2 was observed in the outer estuary, which was apparently induced by a phytoplankton bloom because the dissolved oxygen and chlorophyll a were very high. The Changjiang River Estuary was a significant source of atmospheric CO2 and the degassing fluxes were estimated as 0-230 mmol/（m2.d） [61 mmol/（m2.d） on average] in the inner estuary. In contrast, the outer estuary acted as a CO2 sink.

Effect of CeO_2 on heat transfer and crystallization behavior of rare earth alloy steel mold fluxes

To improve the heat transfer capability and the crystallization property of the traditional mold flux, CaF_2 was replaced with B_2O_3. Then, the influences of CeO_2 on the heat transfer and the crystallization of the CaF_2-bearing mold flux and the new mold flux with 10 wt% B_2O_3 were studied using a slag film heat flux simulator and X-ray diffraction(XRD). The results revealed that the addition of CeO2 reduced the heat transfer by increasing the solid slag thickness and the crystallization of two mold fluxes. However, CeO_2 had less effect on the B_2O_3-containing mold flux compared with the CaF_2-bearing mold flux. According to the analyses, the CeO_2 contents in the CaF_2-bearing mold flux and the B_2O_3-containing mold flux should not exceed 8 wt% and 12 wt%, respectively. Therefore, these experimental results are beneficial to improve and develop the mold flux for casting rare earth alloy steels.