AN EXPERIMENTAL STUDY ON TURBULENT COHERENT STRUCTURES NEAR A SHEARED AIR-WATER INTERFACE

The turbulence structures near a sheared air-water interface were experimentally investigated with the hydrogen bubble visualization technique. Surface shear was imposed by an airflow over the water flow which was kept free from surface waves. Results show that the wind shear has the main influence on coherent structures under air-water interfaces. Low- and high- speed streaks form in the region close to the interface as a result of the imposed shear stress. When a certain airflow velocity is reached, “turbulent spots” appear randomly at low-speed streaks with some characteristics of hairpin vortices. At even higher shear rates, the flow near the interface is dominated primarily by intermittent bursting events. The coherent structures observed near sheared air-water interfaces show qualitative similarities with those occurring in near-wall turbulence. However, a few distinctive phenomena were also observed, including the fluctuating thickness of the instantaneous boundary layer and vertical vortices in bursting processes, which appear to be associated with the characteristics of air-water interfaces.

Numerical Investigation of Transmission of Low Frequency Sound Through a Smooth Air-water Interface

It is the traditional belief that sound transmission from water to the air is very weak due to a large contrast between air and water impedances. Recently, the enhanced sound transmission and anomalous transparency of air-water interface have been introduced. Anomalous transparency of air-water interface states that the sound generated by a submerged shallow depth monopole point source localized at depths less than 1/10 sound wavelength, can be transmitted into the air with omni-directional pattern. The generated sound has 35 times higher power compared to the classical ray theory prediction. In this paper, sound transmission through air-water interface for a localized underwater shallow depth source is examined. To accomplish this, two-phase coupled Helmholtz wave equations in two-phase media of air-water are solved by the commercial finite element based COMSOL Multiphysics software. Ratios of pressure amplitudes of different sound sources in two different underwater and air coordinates are computed and analyzed against non-dimensional ratio of the source depth （D） to the sound wavelength （λ）. The obtained results are compared with the experimental data and good agreement is displayed.

Carbon dioxide partial pressure and carbon fluxes of air-water interface in Taihu Lake, China

To obtain carbon dioxide （CO2） flux between water-air interface of Taihu lake, monthly water samplers at 14 sites and the local meteorological data of the lake were collected and analyzed in 1998. Carbon dioxide partial pressures （pCO2） at air-water interface in the lake were calculated using alkalinity, pH, ionic strength, active coefficient, and water temperature. The carbon fluxes at different sublakes and areas were estimated by concentration gradient between water and air in consideration of Schmidt numbers of 600 and daily mean windspeed at 10 m above water surface. The results indicated that the mean values of pCO2 in Wuli Lake,Meiliang Bay, hydrophyte area, west littoral zone, riverine mouths, and the open lake areas were 1 807.8±1 071.4（mean±standard deviation）μatm （latm=1.013 25×10^5pa）, 416.3±217.0μatm, 576.5±758.8μatm, 304.2±9.43.5μatm, 1 933.6±1 144.7 μatm, and 448.5±202.6μatm, respectively. Maximum and minimum pCO2 values were found in the hypertrophic （4 053.7μatm） and the eutrophic （3.2 μatm） areas. The riverine mouth areas have the maximum fluxes （82.0±62.8 mmol/m^2a）. But there was no significant difference between eutrophic and mesotrophic areas in pCO2 and the flux of CO2. The hydrophyte area, however, has the minimum （--0.58±12.9mmol/m^2a）. In respect to CO2 equilibrium, input of the rivers will obviously influence inorganic carbon distribution in the riverine estuary. For example, the annual mean CO2 flux in Zhihugang River estuary was 19 times of that in Meiliang Bay, although the former is only a part of the latter. The sites in the body of the lake show a clear seasonal cycle with pCO2 higher than atmospheric equilibrium in winter, and much lower than atmospheric in summer due to CO2 consumption by photosynthesis. The CO2 amount of the net annual evasion that enters the atmosphere is 28.42×10^4 t/a, of which those from the west littoral zone and the open lake account for 53.8% and 36.7%, respectively.

SOME CHARACTERISTICS OF LOW-SPEED STREAKS UNDER SHEARED AIR-WATER INTERFACES

The characteristics of low-speed fluid streaks occurring under sheared air-water interfaces were examined by means of hydrogen bubble visualization technique. A critical shear condition under which the streaky structure first appears was determined to be u(tau) approximate to 0.19 cm/s. The mean spanwise streak spacing increases with distance from the water surface owing to merging and bursting processes, and a linear relationship describing variation of non-dimensional spacing <(<lambda>+)over bar> versus y(+) was found essentially independent of shear stress on the interface. Values of <(<lambda>+)over bar>, however, are remarkably smaller than their counterparts in the near-wall region of turbulent boundary layers. Though low-speed streaks occur randomly in time and space, the streak spacing exhibits a lognormal probability distribution behavior. A tentative explanation concerning the formation of streaky structure is suggested, and the fact that <(<lambda>+)over bar> takes rather smaller values than that in wall turbulence is briefly discussed.

PREPARATION OF PERFLUOROOCTANOYL-MODIFIED POLY(VINYL-ALCOHOL)S AND THEIR ADSORPTION AT AN AIR-WATER INTERFACE

Perfluorooctanoyl modified poly(vinyl alcohol)s (FPVA) were prepared by means of substituting a small amount of hydroxyl groups on the backbone of poly(vinyl alcohol), for which the initial degree of polymerization is equal to 1750. The substitution extent, defined by the number of substituting units in a chain, for the four FPVA samples was in the range of 0.5-5 perfluorooctanoyl groups per chain. The FPVA samples with the highest substitution extent still had good solubility in water. It was shown by experimental measurement at 30.0 +/- 0.1 degreesC that the surface tension of the aqueous solution of the highest substituted FPVA decreased to 16.6 mN/m at a higher concentration, e.g. about 0.1 g/mL. Obviously, macromolecules of FPVA exhibit a very strong tendency to adsorb at the air-water interface, because the hydrophobic perfluorooctanoyl groups in FPVA have a very high surface activity as they are in small molecular fluorinated surfactants. The chain conformation of such a model polymer adsorbed on the air-water interface was also discussed.

KINETIC STUDY ON PHOTOISOMERIZATION OF AN AZO-CONTAINING POLYMER AT THE AIR-WATER INTERFACE USING A IANGMUIR TROUGH

Photoisomerization of a new polymer: monoesters of polymaleic acid containing naphthalene-azo-anthraquinone groups in side chains at the air-water interface of a Langmuir trough wan detected by recording the development of surface pressure with time. This process wan found to be a first-order reaction and complete within several minutes.

Forces Acting on Submillimeter Spheres at the Air-Water Interface

The forces acting on submillimeter spheres at the air-water interface are investigated theoretically and experimentally. To calculate the capillary force acting on the sphere, an iterative method is used to determine the immersing position of the liquid interface on the sphere for a given distance. Then the total forces acting on the sphere are considered. The scaling effects of the net force acting on the sphere at the air-water interface are demonstrated. For the experiments, the force-position relationship of microspheres is measured with a precise electronic balance. The results show that the evaporation of the liquid in the container affects the measuring results greatly under ambient conditions. After considering the evaporation compensation, there is a great agree- ment between the theoretical and experimental results. Obvious hysteresis phenomena of the force-distance curve during the emersion processes are also observed and explained.

A Kinetic Model for Describing the Effect of Proteins on the Air-Water Interface Tension

The main objective of this work was to develop a kinetic model to describe the variation of the surface tension in an air-water interface due to the adsorption of proteins from different origins and to identify quantitatively the relevant parameters, it was considered that the processes of adsorption, unfolding and reordering of the protein molecule in the interface occur simultaneously. The model used in the present work to calculate the surface tension postulates the existence of two simultaneous processes, adsorption and protein rearrangement represented with an equation of first order with two exponential components. The relevant parameter of the equation are ka and kr-the rate constants of the two first order kinetic phases that correspond to both conformational states of the protein, adsorption and rearrangement during the process of variation of the surface tension, and the amplitude parameters Aa and Ar. The results suggest that the kinetic model for the variation of the surface tension of protein solutions proposed in this work, with two simultaneous first order processes, is more appropriate than previous models to describe such variation.

Effects of thermodynamics parameters on mass transfer of volatile pollutants at air-water interface

A transient three-dimensional coupling model based on the compressible volume of fluid （VOF） method was developed to simulate the transport of volatile pollutants at the air-water interface. VOF is a numerical technique for locating and tracking the free surface of water flow. The relationships between Henry＇s constant, thermodynamics parameters, and the enlarged topological index were proposed for nonstandard conditions. A series of experiments and numerical simulations were performed to study the transport of benzene and carbinol. The simulation results agreed with the experimental results. Temperature had no effect on mass transfer of pollutants with low transfer free energy and high Henry＇s constant. The temporal and spatial distribution of pollutants with high transfer free energy and low Henry＇s constant was affected by temperature. The total enthalpy and total transfer free energy increased significantly with temperature, with significant fluctuations at low temperatures. The total enthalpy and total transfer free energy increased steadily without fluctuation at high temperatures.

Simulation of Air-Water Interface Effects for High-speed Planing Hull

High-speed planing crafts have successfully evolved through developments in the last several decades.Classical approaches such as inviscid potential flow–based methods and the empirically based Savitsky method provide general understanding for practical design.However,sometimes such analyses suffer inaccuracies since the air–water interface effects,especially in the transition phase,are not fully accounted for.Hence,understanding the behaviour at the transition speed is of fundamental importance for the designer.The fluid forces in planing hulls are dominated by phenomena such as flow separation at various discontinuities viz.,knuckles,chines and transom,with resultant spray generation.In such cases,the application of potential theory at high speeds introduces limitations.This paper investigates the simulation of modelling of the pre-planing behaviour with a view to capturing the air–water interface effects,with validations through experiments to compare the drag,dynamic trim and wetted surface area.The paper also brings out the merits of gridding strategies to obtain reliable results especially with regard to spray generation due to the air–water interface effects.The verification and validation studies serve to authenticate the use of the multi-gridding strategies on the basis of comparisons with simulations using model tests.It emerges from the study that overset/chimera grids give better results compared with single unstructured hexahedral grids.Two overset methods are investigated to obtain reliable estimation of the dynamic trim and drag,and their ability to capture the spray resulting from the air–water interaction.The results demonstrate very close simulation of the actual flow kinematics at steady-speed conditions in terms of spray at the air–water interface,drag at the pre-planing and full planing range and dynamic trim angles.

Tuning Polymer-Grafted Particle Monolayer Structure at the Air-Water Interface by Introducing Anisotropic Features

Fabrication of anisotropic material is one of the important topics and we examined to introduce “anisotropic” nature by spreading polymer-grafted particle on the medium with polymer-reactive potential. Poly (tert-butyl methacrylate) (PtBMA) was polymerized from polystyrene latex (PSL) surface by ATRP to give PtBMA-grafted PSL (PSL-PtBMA). Particle monolayer was formed at air-water and air-acidic water interfaces and the monolayer characteristics were compared by π-A isotherm measurements, SEM observations, and contact angle measurements. π-A isotherms, in particular, indicates that the interaction between polymer chains become stronger by changing the subphase condition, which suggests that anisotropicparticle monolayer formation.

The remarkable but varied photosensitized oxidation by atmospheric humic-like substances at the air-water interface

Humic-like substances(HULIS),a class of macromolecular photosensitizers,are major components of light-absorbing aerosols in the atmosphere.Due to the amphiphilic nature of HULIS,they tend to appear at the air-water interface of atmospheric water.However,there have been limited studies on the photosensitized chemistry of HULIS at the air-water interface owing to the lack of methods with high interface selectivity.Here,a unique field-induced droplet ionization mass spectrometry(FIDI-MS)technique was used to investigate the photosensitized chemistry of several samples at the air-water interface.These samples include commercially available humic acid and the PM_(2.5)sample collected during Beijing′s severe winter haze in December 2016.Ultrahigh-resolution Fourier transform-ion cyclotron resonance mass spectrometry(FT-ICR MS)was also applied to analyze the atomic compositions,the degree of unsaturation and the aromaticity of these samples.Both TypeⅠand TypeⅡphotosensitized oxidation pathways were observed,which were postulated to be dictated by the packing density of the molecules at the air-water interface.These findings reveal that the photosensitization of HULIS at the air-water interface contributes greatly to the formation of atmospheric aerosols,further advancing our understanding of the important roles played by photosensitized chemistry in the atmosphere.

Multiple Tin Compounds Modified Carbon Fibers to Construct Heterogeneous Interfaces for Corrosion Prevention and Electromagnetic Wave Absorption

Currently,the demand for electromagnetic wave(EMW)absorbing materials with specific functions and capable of withstanding harsh environments is becoming increasingly urgent.Multi-component interface engineering is considered an effective means to achieve high-efficiency EMW absorption.However,interface modulation engineering has not been fully discussed and has great potential in the field of EMW absorption.In this study,multi-component tin compound fiber composites based on carbon fiber(CF)substrate were prepared by electrospinning,hydrothermal synthesis,and high-temperature thermal reduction.By utilizing the different properties of different substances,rich heterogeneous interfaces are constructed.This effectively promotes charge transfer and enhances interfacial polarization and conduction loss.The prepared SnS/SnS_(2)/SnO_(2)/CF composites with abundant heterogeneous interfaces have and exhibit excellent EMW absorption properties at a loading of 50 wt%in epoxy resin.The minimum reflection loss(RL)is−46.74 dB and the maximum effective absorption bandwidth is 5.28 GHz.Moreover,SnS/SnS_(2)/SnO_(2)/CF epoxy composite coatings exhibited long-term corrosion resistance on Q235 steel surfaces.Therefore,this study provides an effective strategy for the design of high-efficiency EMW absorbing materials in complex and harsh environments.

Multiple evaluations of atmospheric behavior between Criegee intermediates and HCHO: Gas-phase and air-water interface reaction

Given the high abundance of water in the atmosphere,the reaction of Criegee intermediates(CIs)with(H_(2)O)_(2) is considered to be the predominant removal pathway for CIs.However,recent experimental findings reported that the reactions of CIs with organic acids and carbonyls are faster than expected.At the same time,the interface behavior between CIs and carbonyls has not been reported so far.Here,the gas-phase and air-water interface behavior between Criegee intermediates and HCHO were explored by adopting high-level quantum chemical calculations and Born-Oppenheimer molecular dynamics(BOMD)simulations.Quantum chemical calculations evidence that the gas-phase reactions of CIs+HCHO are submerged energy or low energy barriers processes.The rate ratios speculate that the HCHO could be not only a significant tropospheric scavenger of CIs,but also an inhibitor in the oxidizing ability of CIs on SO_(x) in dry and highly polluted areas with abundant HCHO concentration.The reactions of CH_(2)OO with HCHO at the droplet’s surface follow a loop structure mechanism to produce i)SOZ(■),ii)BHMP(HOCH_(2)OOCH_(2)OH),and iii)HMHP(HOCH_(2)OOH).Considering the harsh reaction conditions between CIs and HCHO at the interface(i.e.,the two molecules must be sufficiently close to each other),the hydration of CIs is still their main atmospheric loss pathway.These results could help us get a better interpretation of the underlying CIs-aldehydes chemical processes in the global polluted urban atmospheres.

Analysis of Micromechanical Properties at the Interface of Pre-wet SBS Modified Asphalt Mixture Based on Molecular Simulation Technology

The pre-wetting of aggregate surface is a means to improve the interface performance of SBS modified asphalt and aggregate.The effect of pre-wetting technology on the interaction between SBS modified asphalt and aggregate was analyzed by molecular dynamics simulation.The diffusion coefficient and concentration distribution of SBS modified asphalt on aggregate surface are included.The simulation results show that the diffusion coefficient of the aggregate surface of SBS modified asphalt is increased by 47.6%and 70.5%respectively after 110#asphalt and 130#asphalt are pre-wetted.The concentration distribution of SBS modified asphalt on the aggregate surface after pre-wetting is more uniform.According to the results of interface energy calculation,the interface energy of SBS modified bitumen and aggregate can be increased by about 5%after pre-wetting.According to the results of molecular dynamics simulation,the pre-wetting technology can effectively improve the interface workability of SBS modified bitumen and aggregate,so as to improve the interface performance.

Bulging Performance and Quality Control of Aluminum Alloy Tailor-welded Overlapping Sheets Based on Interface Friction

In order to solve the problem of poor formability caused by different materials and properties in the process of tailor-welded sheets forming,a forming method was proposed to change the stress state of tailor-welded sheets by covering the tailor-welded sheets with better plastic properties overlapping sheets.At the same time,the interface friction effect between the overlapping and tailor-welded sheets was utilized to control the stress magnitude and further improve the formability and quality of the tailor-welded sheets.In this work,the bulging process of the tailor-welded overlapping sheets was taken as the research object.Aluminum alloy tailor-welded overlapping sheets bulging specimens were studied by a combination of finite element analysis and experimental verification.The results show that the appropriate use of interface friction between tailor-welded and overlapping sheets can improve the formability of tailor-welded sheets and control the flow of weld seam to improve the forming quality.When increasing the interface friction coefficient on the side of tailor-welded sheets with higher strength and decreasing that on the side of tailor-welded sheets with lower strength,the deformation of the tailor-welded sheets are more uniform,the offset of the weld seam is minimal,the limit bulging height is maximal,and the forming quality is optimal.

Research status and prospects of the fractal analysis of metal material surfaces and interfaces

As a mathematical analysis method,fractal analysis can be used to quantitatively describe irregular shapes with self-similar or self-affine properties.Fractal analysis has been used to characterize the shapes of metal materials at various scales and dimensions.Conventional methods make it difficult to quantitatively describe the relationship between the regular characteristics and properties of metal material surfaces and interfaces.However,fractal analysis can be used to quantitatively describe the shape characteristics of metal materials and to establish the quantitative relationships between the shape characteristics and various properties of metal materials.From the perspective of two-dimensional planes and three-dimensional curved surfaces,this paper reviews the current research status of the fractal analysis of metal precipitate interfaces,metal grain boundary interfaces,metal-deposited film surfaces,metal fracture surfaces,metal machined surfaces,and metal wear surfaces.The relationship between the fractal dimensions and properties of metal material surfaces and interfaces is summarized.Starting from three perspectives of fractal analysis,namely,research scope,image acquisition methods,and calculation methods,this paper identifies the direction of research on fractal analysis of metal material surfaces and interfaces that need to be developed.It is believed that revealing the deep influence mechanism between the fractal dimensions and properties of metal material surfaces and interfaces will be the key research direction of the fractal analysis of metal materials in the future.

Advanced Functional Electromagnetic Shielding Materials:A Review Based on Micro‑Nano Structure Interface Control of Biomass Cell Walls

Research efforts on electromagnetic interference(EMI)shielding materials have begun to converge on green and sustainable biomass materials.These materials offer numerous advantages such as being lightweight,porous,and hierarchical.Due to their porous nature,interfacial compatibility,and electrical conductivity,biomass materials hold significant potential as EMI shielding materials.Despite concerted efforts on the EMI shielding of biomass materials have been reported,this research area is still relatively new compared to traditional EMI shielding materials.In particular,a more comprehensive study and summary of the factors influencing biomass EMI shielding materials including the pore structure adjustment,preparation process,and micro-control would be valuable.The preparation methods and characteristics of wood,bamboo,cellulose and lignin in EMI shielding field are critically discussed in this paper,and similar biomass EMI materials are summarized and analyzed.The composite methods and fillers of various biomass materials were reviewed.this paper also highlights the mechanism of EMI shielding as well as existing prospects and challenges for development trends in this field.

Experimental study of air-water interface properties in self-aerated flows

The microscopic air-water structures and the interface area properties in the self-aerated flows are important research issues in the high-speed self-aerated flows.The present experimental study concerns the mean and medium air chord length distributions in the self-aerated chute flows for different flow Reynolds numbers and air concentration conditions.The relationship between the microscopic and the macroscopic aerated properties in the air-water mixture region is analyzed.The distribution of the microscopic specific air-water interface area with the macroscopic air concentration variation is self-similar in the self-aerated region.In view of the difference of the air-water structure in high and low aerated regions,a new relationship is proposed for predicting the distributions of a specific air-water interface area,and the agreement between the measured and predicted results is satisfactory.

Two-phase smooth particle hydrodynamics modeling of air-water interface in aerated flows

Abstracted/indexed in：Science Citation Index,Science Citation Index Expanded（SciSearch）,Journal Citation Reports/Science Edition,SCOPUS,INSPEC,Zentralblatt Math,Chemical Abstracts Service（CAS）,Google Scholar,CSA,Academic OneFile,Current Contents/Engineering,Computing and Technology,Earthquake Engineering Abstracts,EI-Compendex,Gale,OCLC,SCImago,Summon by ProQuest Supervised by Chinese Academy of Sciences