Theoretical and Experimental Studies of Schottky Diodes that Use Aligned Arrays of Single-Walled Carbon Nanotubes

We present theoretical and experimental studies of Schottky diodes that use aligned arrays of single-walled carbon nanotubes. A simple physical model, taking into account the basic physics of current rectification, can adequately describe the single-tube and array devices. We show that for as-grown array diodes, the rectification ratio, defined by the maximum-to-minimum-current-ratio, is low due to the presence of metallic-single-walled nanotube (SWNT) shunts. These tubes can be eliminated in a single voltage sweep resulting in a high rectification array device. Further analysis also shows that the channel resistance, and not the intrinsic nanotube diode properties, limits the rectification in devices with channel length up to 10 μm.

Investigation on the Formation Mechanism of Double-Layer Vertically Aligned Carbon Nanotube Arrays via Single-Step Chemical Vapour Deposition

The mechanism for the formation of double-layer vertically aligned carbon nanotube arrays(VACNTs) through single-step CVD growth is investigated. The evolution of the structures and defect concentration of the VACNTs are tracked by scanning electron microscopy(SEM) and Raman spectroscopy. During the growth, the catalyst particles are stayed constantly on the substrate. The precipitation of the second CNT layer happens at around 30 min as proved by SEM.During the growth of the first layer, catalyst nanoparticles are deactivated with the accumulation of amorphous carbon coatings on their surfaces, which leads to the termination of the growth of the first layer CNTs. Then, the catalyst particles are reactivated by the hydrogen in the gas flow, leading to the precipitation of the second CNT layer. The growth of the second CNT layer lifts the amorphous carbon coatings on catalyst particles and substrates. The release of mechanical energy by CNTs provides big enough energy to lift up amorphous carbon flakes on catalyst particles and substrates which finally stay at the interfaces of the two layers simulated by finite element analysis. This study sheds light on the termination mechanism of CNTs during CVD process.

Aligned carbon nanostructures based 3D electrodes for energy storage

Electrochemical energy storage systems with high specific energy and power as well as long cyclic stability attract increasing attention in new energy technologies. The principles for rational design of electrodes are discussed to reduce the activation, concentration, and resistance overpotentials and improve the active ma- terial efficiency in order to simultaneously achieve high specific energy and power. Three dimensional （3D） nanocomposites are currently considered as promising electrode materials due to their large surface area, reduced electronic and ionic diffusion distances, and synergistic effects. This paper reviews the most recent progress on the synthesis and application of 3D thin film nanoelectrode arrays based on aligned carbon nan- otubes （ACNTs） directly grown on metal foils for energy storages and special attentions are paid on our own representative works. These novel 3D nanoelectrode arrays on metal foil exhibit improved electrochemical performances in terms of specific energy, specific power and cyclic stability due to their unique structures. In this active materials coated ACNTs over conductive substrate structures, each component is tailored to address a different demand. The electrochemical active material is used to store energy, while the ACNTs are employed to provide a large surface area to support the active material and nanocable arrays to facilitate the electron transport. The thin film of active materials can not only reduce ion transport resistance by shorten- ing the diffusion length but also make the film elastic enough to tolerate significant volume changes during charge and discharge cycles. The conductive substrate is used as the current collector and the direct contact of the ACNT arrays with the substrate reduces significantly the contact resistance. The principles obtained from ACNT based electrodes are extended to aligned graphene based electrodes. Similar improvements have been achieved which confirms the reliability of the principles obtained. In addition, we also discuss and view the ongoing trends in development of aligned carbon nanostructures based electrodes for energy storage.

Growth modulation of simultaneous epitaxy of ZnO obliquely aligned nanowire arrays and film on r-plane sapphire substrate

Simultaneous epitaxial growth of film and nanowire array on a substrate is of both scientific significance and practical importance for nanoscale optoelectronics. Nevertheless, in situ building conducting connection between individually isolated nanowires grown on insulating substrates is still challenging. Herein, we demonstrate a novel and facile strategy for the simultaneous epitaxial growth of nonpolar a-plane ZnO film and obliquely aligned nanowire array on Au-coated r-plane sapphire substrate. The morphology, structure, components, and optical properties of the as-synthesized ZnO nanostructures were investigated using field-emission scanning electron microscopy X-ray diffraction, field-emission transmission electron microscopy energy-dispersive spectroscopy, X-ray photo- electron spectroscopy, and photoluminescence spectroscopy. A cooperative growth mechanism is proposed： Au-catalyzed vapor transport initiates the co-occurrence of nonpolar a-plane and polar c-plane ZnO nuclei, and subsequently, the non-upward directed Au catalyst helps the nonpolar a-plane ZnO nuclei develop into a ZnO conductive film at the bottom and zinc self-catalyzed vapor-liquid-solid growth helps the polar c-plane ZnO nuclei develop simultaneously into obliquely aligned nanowire arrays. The proposed strategy realized in situ synthesis of nanowires with conductive connection and it can benefit the application of ZnO nanowires in optoelectronics.

A Highly Ordered Hydrophilic–Hydrophobic Janus Bi-Functional Layer with Ultralow Pt Loading and Fast Gas/Water Transport for Fuel Cells

One of the critical challenges that limit broad commercialization of proton exchange membrane fuel cells(PEMFC)is to reduce the usage of Pt while maintaining high power output and sufficient durability.Herein,a novel bifunctional layer consisting of vertically aligned carbon nanotubes(VACNTs)and nanoparticles of Pt-Co catalysts(Pt-Co/VACNTs)is reported for highperformance PEMFCs.Readily prepared by a two-step process,the Pt-Co/VACNTs layer with a hydrophilic catalyst-loaded side and a hydrophobic gas diffusion side enables a PTFE-free electrode structure with fully exposed catalyst active sites and superior gas–water diffusion capability.When tested in a PEMFC,the bi-functional Pt-Co/VACNTs layer with ultralow Pt loading(~65μgcathodecm-2)demonstrates a power density of 19.5 kW gPt cathode-1 at 0.6 V,more than seven times that of a cell with commercial Pt/C catalyst(2.7 kW gPt cathode-1 at 0.6 V)at a loading of 400μgcathodecm-2 tested under similar conditions.This remarkable design of VACNTs-based catalyst with dual functionalities enables much lower Pt loading,faster mass transport,and higher electrochemical performance and stability.Further,the preparation procedure can be easily scaled up for low-cost fabrication and commercialization.

Encapsulated carbon nanotube array as a thermal interface material compatible with standard electronics packaging

Vertically aligned carbon nanotubes arrays(VACNTs)are a promising candidate for the thermal interface material(TIM)of next-generation electronic devices due to their attractive thermal and mechanical properties.However,the environment required for synthesizing VACNTs is harsh and severely incompatible with standard device packaging processes.VACNTs’extremely low in-plane thermal conductivity also limits its performance for cooling hot spots.Here,using a transfer-and-encapsulate strategy,a two-step soldering method is developed to cap both ends of the VACNTs with copper microfoils,forming a standalone Cu-VACNTs-Cu sandwich TIM and avoiding the need to directly grow VACNTs on chip die.This new TIM is fully compatible with standard packaging,with excellent flexibility and high thermal conductivities in both in-plane and through-plane directions.The mechanical compliance behavior and mechanism,which are critical for TIM applications,are investigated in depth using in situ nanoindentation.The thermal performance is further verified in an actual light emitting diode(LED)cooling experiment,demonstrating low thermal resistance,good reliability,and achieving a 17℃ temperature reduction compared with state-of-the-art commercial TIMs.This study provides a viable solution to VACNTs’longstanding problem in device integration and free-end contact resistance,bringing it much closer to application and solving the critical thermal bottleneck in next-generation electronics.