The effect of microwave treatment on the tensile properties of treated sugar palm fibre with 6% NaOH reinforced thermoplastic polyurethane composites was investigated. Firstly, the sugar palm fibres were treated by 6%...The effect of microwave treatment on the tensile properties of treated sugar palm fibre with 6% NaOH reinforced thermoplastic polyurethane composites was investigated. Firstly, the sugar palm fibres were treated by 6% alkali solution. Then, microwave treatment was used to treat the alkali treated sugar palm fibres. Three types of temperatures(i.e. 70, 80 and 90℃) were applied in microwave treatment. The extruder and hot press machines were used to mixing the sugar palm fibres and polyurethane resin, and fabricate the composites. Tensile properties(i.e. tensile strength, tensile modulus and elongation at break) were studied by following the ASTM D-638 standard. The highest tensile strength was recorded 18.42 MPa with microwave temperature at 70℃ and 6% alkali pre-treatment. Therefore, the temperature 70℃ of microwave treatment may consider the best degree cent grate.展开更多
文摘The effect of microwave treatment on the tensile properties of treated sugar palm fibre with 6% NaOH reinforced thermoplastic polyurethane composites was investigated. Firstly, the sugar palm fibres were treated by 6% alkali solution. Then, microwave treatment was used to treat the alkali treated sugar palm fibres. Three types of temperatures(i.e. 70, 80 and 90℃) were applied in microwave treatment. The extruder and hot press machines were used to mixing the sugar palm fibres and polyurethane resin, and fabricate the composites. Tensile properties(i.e. tensile strength, tensile modulus and elongation at break) were studied by following the ASTM D-638 standard. The highest tensile strength was recorded 18.42 MPa with microwave temperature at 70℃ and 6% alkali pre-treatment. Therefore, the temperature 70℃ of microwave treatment may consider the best degree cent grate.
文摘为了探究不同预处理方式污泥对MFC(microbial fuel cell,微生物燃料电池)的影响,采用双室MFC反应器构型,以不同预处理方式的污泥作为MFC的底物基质,包括热处理污泥、废碱渣预处理污泥、未处理污泥,并设置静态试验组污泥(开路试验),考察MFC的产电性能(电压、电功率密度)、pH、CODCr、总悬浮物(TSS)、挥发性悬浮物(VSS)、EPS(胞外聚合物)以及三维荧光等参数的变化规律.结果表明:(1)在所设外电阻条件下(1 000Ω),MFC的最大启动电压可达0.3 V;(2)废碱渣预处理污泥的最大功率密度可达70.1 m W/m2,热处理污泥的最大功率密度可达60.1 m W/m2,预处理后污泥的性能优于未处理污泥;(3)热处理污泥、废碱渣预处理污泥、未处理污泥以及静态试验组污泥的pH总体呈下降的趋势,废碱渣预处理污泥及热处理污泥总悬浮物和挥发性悬浮物的去除率均高于未处理污泥,且CODCr有类似的变化规律.在此基础上,进一步分析污泥EPS的组成成分以及三维荧光光谱图的特性发现,污泥EPS中蛋白质质量浓度最高,并且腐殖酸能够在一定程度上辅助胞外电子基团的转移,三维荧光光谱图也证实了不同预处理方式污泥随厌氧消化过程的变化规律.研究显示,将废碱渣预处理的污泥作为MFC的底物,不仅降低了资源能耗而且提高了MFC的产电性能,实现了综合绿色发展.
