The Durability of Alkali-Activated Materials in Comparison with Ordinary Portland Cements and Concretes:A Review

China is the largest producer and user of ordinary Portland cement(OPC),and the rapid growth of infrastructure development demands more sustainable building materials for concrete structures.Alkali-activated materials(AAMs)are a new type of energy-saving and environmentally friendly building material with a wide range of potential applications.This paper compares the durability of AAMs and 0 PC-based materials un der sulfate attack,acid corrosion,carb on ation,and chloride penetratio n.Different AAMs have shown distinct durability properties due to different compositions being formed when different raw materials are used.According to the calcium(Ca)concentration of the raw materials,this paper interprets the deterioration mechanisms of three categories of AAMs:calcium-free,low-calcium,and calcium-rich.Conflicts found in the most recent research are highlighted,as they raise concerns regarding the consistenee and long-term properties of AAMs.Nevertheless,AAMs show better durability performances than OPC-based materials in general.

Rainfall-induced wind erosion in soils stabilized with alkali-activated waste materials

This study evaluates the efficacy of sustainable erosion control using slag-based alkali-activated cement crusts under varying rainfall and wind conditions. The rainfall intensities ranged from 30 mm/h to 120 mm/h, with durations ranging from 15 min to 90 min, and crust slopes of ∼2° (gentle) and 30° (steep). Wind tunnel experiments were conducted at wind velocities of 14 m/s, 21 m/s, and 28 m/s to investigate post-rainfall wind erodibility, along with changes in crust strength and microstructure analysis. The findings show the development of hydrated cementitious phases in alkali-activated material, which form around and between the particles during the alkaline activation process. Alkali-activated cement crusts significantly reduced erosion caused by rainfall and subsequent wind by several orders of magnitude. At the highest rainfall intensity of 120 mm/h, rainfall erosion was measured to be 1654.81 kg/m2 for untreated samples and 0.89 kg/m2 for treated samples, demonstrating a substantial 99.95% reduction in erosion due to the treatment. Similarly, at the highest wind speed tested, wind erosion was 122.75 kg/m2 for untreated samples and 0.095 kg/m2 for treated samples, indicating a significant 99.92% reduction in erosion due to the formation of an alkali-activated cement crust on the soil surface. However, exposure of the samples to 120 mm/h rainfall for 90 min resulted in a 5.2-fold increase in wind erosion compared to pre-rainfall conditions. Similarly, penetrometer results indicated a 37%–54% reduction in post-rainfall surface strength.

Comparison and assessment of carbon dioxide emissions between alkali-activated materials and OPC cement concrete

Geopolymer concrete(GPC)has been developed as a sustainable alternative to traditional cement-based concrete using industrial waste materials.Thus,reducing greenhouse gas emissions in concrete production can be expected.This study employed the life cycle assessment(LCA)method to evaluate geopolymer concrete's cost and life-cycle carbon dioxide(CO_(2))emissions.Moreover,the critical transportation radius of the geopolymer is estimated.Then,evaluation results were compared with ordinary Portland cement(OPC),considering three concrete construction methods:cast-in-place,ready-mixed,and precast.In particular,the service life of two types of concrete in sulfuric acid environments is considered.Compared with OPC concrete,the results show that geopolymer concretes can significantly reduce the cost and CO_(2)emissions when one or a small amount of alkali activator is used or alkali-containing materials are used to replace some alkali activators.However,the advantages would be reversed by the rising alkali dosages,which account for cost increases and carbon emissions.When considering the service life in special environments,geopolymer concrete in sulfuric acid environments corresponds to fewer carbon emissions,94%-97%decreased compared with OPC concrete.Finally,compared with OPC concrete,the newly developed limestone calcined clay cement(LC3)avoids high-temperature calcination and dramatically reduces carbon dioxide emissions.Compared to OPC concrete,LC3 concrete has a 19%reduction in CO_(2) emissions.And geopolymer concrete that takes alkali-activate materials for superseding alkalis also produces less carbon dioxide emissions.In particular,CO_(2) emissions from FA-SF geopolymer concrete are approximately 50%lower than OPC concrete.In addition,the use of alkali activators significantly weakens the cost advantage of geopolymers.But after accounting for waste disposal costs,the average net cost of fly ash-based geopolymer concrete can be more than 30% lower than that of OPC concrete.The average net cost of slag-based geopolymer concrete is 7%-45%lower than that of OPC concrete.The findings of this work provide the basis for further development of geopolymer concretes obeyed environmental protection.

Mitigating drying shrinkage and efflorescence in high strength alkali-activated materials through steam curing

The manufacturing of Ordinary Portland Cement(OPC)significantly contributes to global carbon dioxide(CO2)emissions,necessitating the exploration of alternative binders like alkali-activated materials(AAM).Despite its environmental benefits,AAM generally faces challenges such as drying shrinkage and efflorescence,limiting its industrial application.This study focuses on investigating the impact of steam curing on addressing these challenges in high strength slag-based AAM.The results indicates that high strength AAM can be developed by carefully optimizing the activator-to-binder and water-to-binder ratios,and incorporating steam curing.Specifically,a compressive strength of 112.4 MPa was achieved after one day of steam curing,compared to 100.8 MPa after 28 days of standard curing.This demonstrates the ability of steam curing to accelerate strength development of AAM.Furthermore,steam curing proved to be highly effective in reducing drying shrinkage,which was decreased from 17351 microstrains to 1440 microstrains.This reduction aligns the shrinkage levels of AAM with those of OPC,addressing a major limitation of AAM.This study also found that efflorescence was notably mitigated,with a significant reduction observed after a 24-hour steam curing period.These findings highlight steam curing as a cost-effective and practical-effective method in improving the performance of AAM.By addressing the key challenges,steam curing facilitates the broader adoption of AAM in sustainable construction practices.

High‑Entropy Electrode Materials:Synthesis,Properties and Outlook

High-entropy materials represent a new category of high-performance materials,first proposed in 2004 and extensively investigated by researchers over the past two decades.The definition of high-entropy materials has continuously evolved.In the last ten years,the discovery of an increasing number of high-entropy materials has led to significant advancements in their utilization in energy storage,electrocatalysis,and related domains,accompanied by a rise in techniques for fabricating high-entropy electrode materials.Recently,the research emphasis has shifted from solely improving the performance of high-entropy materials toward exploring their reaction mechanisms and adopting cleaner preparation approaches.However,the current definition of high-entropy materials remains relatively vague,and the preparation method of high-entropy materials is based on the preparation method of single metal/low-or medium-entropy materials.It should be noted that not all methods applicable to single metal/low-or medium-entropy materials can be directly applied to high-entropy materials.In this review,the definition and development of high-entropy materials are briefly reviewed.Subsequently,the classification of high-entropy electrode materials is presented,followed by a discussion of their applications in energy storage and catalysis from the perspective of synthesis methods.Finally,an evaluation of the advantages and disadvantages of various synthesis methods in the production process of different high-entropy materials is provided,along with a proposal for potential future development directions for high-entropy materials.

Recent Advances in Fibrous Materials for Hydroelectricity Generation

Depleting fossil energy sources and conventional polluting power generation pose a threat to sustainable development.Hydroelectricity generation from ubiquitous and spontaneous phase transitions between liquid and gaseous water has been considered a promising strategy for mitigating the energy crisis.Fibrous materials with unique flexibility,processability,multifunctionality,and practicability have been widely applied for fibrous materials-based hydroelectricity generation(FHG).In this review,the power generation mechanisms,design principles,and electricity enhancement factors of FHG are first introduced.Then,the fabrication strategies and characteristics of varied constructions including 1D fiber,1D yarn,2D fabric,2D membrane,3D fibrous framework,and 3D fibrous gel are demonstrated.Afterward,the advanced functions of FHG during water harvesting,proton dissociation,ion separation,and charge accumulation processes are analyzed in detail.Moreover,the potential applications including power supply,energy storage,electrical sensor,and information expression are also discussed.Finally,some existing challenges are considered and prospects for future development are sincerely proposed.

Nanograting‑Based Dynamic Structural Colors Using Heterogeneous Materials

Dynamic structuralcolors can change in response todifferent environmental stimuli.This ability remains effectiveeven when the size of the speciesresponsible for the structural coloris reduced to a few micrometers,providing a promising sensingmechanism for solving microenvironmentalsensing problems inmicro-robotics and microfluidics.However, the lack of dynamicstructural colors that can encoderapidly, easily integrate, and accuratelyreflect changes in physical quantities hinders their use in microscale sensing applications. Herein, we present a 2.5-dimensionaldynamic structural color based on nanogratings of heterogeneous materials, which were obtained by interweaving a pH-responsive hydrogelwith an IP-L photoresist. Transverse gratings printed with pH-responsive hydrogels elongated the period of longitudinal grating in the swollenstate, resulting in pH-tuned structural colors at a 45° incidence. Moreover, the patterned encoding and array printing of dynamic structuralcolors were achieved using grayscale stripe images to accurately encode the periods and heights of the nanogrid structures. Overall, dynamicstructural color networks exhibit promising potential for applications in information encryption and in situ sensing for microfluidic chips.

From waste to wealth:Coal tar residue derived carbon materials as low-cost anodes for potassium-ion batteries

Carbon materials are widely recognized as highly promising electrode materials for various energy storage system applications.Coal tar residues(CTR),as a type of carbon-rich solid waste with high value-added utilization,are crucially important for the development of a more sustainable world.In this study,we employed a straightforward direct carbonization method within the temperature range of 700-1000℃to convert the worthless solid waste CTR into economically valuable carbon materials as anodes for potassium-ion batteries(PIBs).The effect of carbonization temperature on the microstructure and the potassium ions storage properties of CTR-derived carbons(CTRCs)were systematically explored by structural and morphological characterization,alongside electrochemical performances assessment.Based on the co-regulation between the turbine layers,crystal structure,pore structure,functional groups,and electrical conductivity of CTR-derived carbon carbonized at 900℃(CTRC-900H),the electrode material with high reversible capacity of 265.6m Ah·g^(-1)at 50 m A·g^(-1),a desirable cycling stability with 93.8%capacity retention even after 100 cycles,and the remarkable rate performance for PIBs were obtained.Furthermore,cyclic voltammetry(CV)at different scan rates and galvanostatic intermittent titration technique(GITT)have been employed to explore the potassium ions storage mechanism and electrochemical kinetics of CTRCs.Results indicate that the electrode behavior is predominantly governed by surface-induced capacitive processes,particularly under high current densities,with the potassium storage mechanism characterized by an“adsorption-weak intercalation”mechanism.This work highlights the potential of CTR-based carbon as a promising electrode material category suitable for high-performance PIBs electrodes,while also provides valuable insights into the new avenues for the high value-added utilization of CTR.

Advanced Functional Electromagnetic Shielding Materials:A Review Based on Micro‑Nano Structure Interface Control of Biomass Cell Walls

Research efforts on electromagnetic interference(EMI)shielding materials have begun to converge on green and sustainable biomass materials.These materials offer numerous advantages such as being lightweight,porous,and hierarchical.Due to their porous nature,interfacial compatibility,and electrical conductivity,biomass materials hold significant potential as EMI shielding materials.Despite concerted efforts on the EMI shielding of biomass materials have been reported,this research area is still relatively new compared to traditional EMI shielding materials.In particular,a more comprehensive study and summary of the factors influencing biomass EMI shielding materials including the pore structure adjustment,preparation process,and micro-control would be valuable.The preparation methods and characteristics of wood,bamboo,cellulose and lignin in EMI shielding field are critically discussed in this paper,and similar biomass EMI materials are summarized and analyzed.The composite methods and fillers of various biomass materials were reviewed.this paper also highlights the mechanism of EMI shielding as well as existing prospects and challenges for development trends in this field.

Oxidation Resistance of Form-stable Hightemperature Phase Change Thermal Energy Storage Materials Doped by Impregnated Graphite

We adopted the solution impregnation route with aluminum dihydrogen phosphate solution as liquid medium for effective surface modification on graphite substrate.The mass ratio of graphite to Al(H_(2)PO_(4))_(3) changed from 0.5:1 to 4:1,and the impregnation time changed from 1 to 7 h.The typical composite phase change thermal storage materials doped with the as-treated graphite were fabricated using form-stable technique.To investigate the oxidation and anti-oxidation behavior of the impregnated graphite at high temperatures,the samples were put into a muffle furnace for a cyclic heat test.Based on SEM,EDS,DSC techniques,analyses on the impregnated technique suggested an optimized processing conditions of a 3 h impregnation time with the ratio of graphite:Al(H_(2)PO_(4))_(3) as 1:3 for graphite impregnation treatment.Further investigations on high-temperature phase change heat storage materials doped by the treated graphite suggested excellent oxidation resistance and thermal cycling performance.

Defect Engineering:Can it Mitigate Strong Coulomb Effect of Mg^(2+)in Cathode Materials for Rechargeable Magnesium Batteries?

Rechargeable magnesium batteries(RMBs)have been considered a promising“post lithium-ion battery”system to meet the rapidly increasing demand of the emerging electric vehicle and grid energy storage market.However,the sluggish diffusion kinetics of bivalent Mg^(2+)in the host material,related to the strong Coulomb effect between Mg^(2+)and host anion lattices,hinders their further development toward practical applications.Defect engineering,regarded as an effective strategy to break through the slow migration puzzle,has been validated in various cathode materials for RMBs.In this review,we first thoroughly understand the intrinsic mechanism of Mg^(2+)diffusion in cathode materials,from which the key factors affecting ion diffusion are further presented.Then,the positive effects of purposely introduced defects,including vacancy and doping,and the corresponding strategies for introducing various defects are discussed.The applications of defect engineering in cathode materials for RMBs with advanced electrochemical properties are also summarized.Finally,the existing challenges and future perspectives of defect engineering in cathode materials for the overall high-performance RMBs are described.

Resistance of Cement-based Grouting Materials with Nano- SiO_(2) Emulsion to Chloride Ion Penetration

The chloride penetration resistance of cement-based grout materials was improved by nano-silica emulsion.Specimens of mixtures containing different nano-silica particles or emulsions were exposed in sodium chloride solutions of specific concentrations with different test ages.Hardened properties of the mixes were assessed in terms of weight loss and compressive strength.X-ray diffraction(XRD)and scanning electron microscopy(SEM)of mixes were performed to analysis the phase evolution and microstructure.The results demonstrated that the introduction of nano-SiO_(2) emulsion significantly decreased the compressive strength loss and calcium hydroxide(CH)crystal content of hydration production,and then enhanced the resistance of cement-based grouting materials to chloride ion penetration.This improvement derives from the filling and pozzolanic effects of nano-SiO_(2) particles,which were incorporated via an emulsion and attributed to a well dispersion in grouting matrix.

Optimization Strategies of Na_(3)V_(2)(PO_(4))_(3) Cathode Materials for Sodium‑Ion Batteries

Na_(3)V_(2)(PO_(4))_(3)(NVP)has garnered great attentions as a prospective cathode material for sodium-ion batteries(SIBs)by virtue of its decent theoretical capacity,superior ion conductivity and high structural stability.However,the inherently poor electronic conductivity and sluggish sodium-ion diffusion kinetics of NVP material give rise to inferior rate performance and unsatisfactory energy density,which strictly confine its further application in SIBs.Thus,it is of significance to boost the sodium storage performance of NVP cathode material.Up to now,many methods have been developed to optimize the electrochemical performance of NVP cathode material.In this review,the latest advances in optimization strategies for improving the electrochemical performance of NVP cathode material are well summarized and discussed,including carbon coating or modification,foreign-ion doping or substitution and nanostructure and morphology design.The foreign-ion doping or substitution is highlighted,involving Na,V,and PO_(4)^(3−)sites,which include single-site doping,multiple-site doping,single-ion doping,multiple-ion doping and so on.Furthermore,the challenges and prospects of high-performance NVP cathode material are also put forward.It is believed that this review can provide a useful reference for designing and developing high-performance NVP cathode material toward the large-scale application in SIBs.

A Greener Future: Carbon Nanomaterials from Lignocellulose

Lignocellulosic materials(LCMs),abundant biomass residues,pose significant environmental challenges when improperly disposed of.LCMs,such as sugarcane bagasse,rice straw,saw dust and agricultural residues,are abun-dant but often burned,contributing to air pollution and greenhouse gas emissions.This review explores the potential of transforming these materials into high-value carbon nanomaterials(CNMs).We explore the potential of transforming these materials into high-value CNMs.By employing techniques like carbonization and activa-tion,LCMs can be converted into various CNMs,including carbon nanotubes(CNTs),graphene(G),graphene oxide(GO),carbon quantum dots(CQDs),nanodiamonds(NDs),fullerenes(F),carbon nanofibers(CNFs),and others.Hybridizing different carbon allotropes further enhances their properties.CNMs derived from cellulose,lignin,and hemicellulose exhibit promising applications in diversefields.For instance,CNTs can be used in energy storage devices like batteries and supercapacitors due to their exceptional electrical conductivity and mechanical strength.Additionally,CNTs can be incorporated into recycled paper as afire retardant additive,enhancing itsflame resistance.G,renowned for its high surface area and excellent electrical conductivity,finds applications in electronics,sensors,catalysis,and water treatment,where it can be used to adsorb heavy metal ions.CQDs,owing to their unique optical properties,are used in bioimaging,drug delivery,and optoelectronic devices.By harnessing the potential of LCMs,we can not only mitigate environmental concerns but also contri-bute to a sustainable future.Continued research is essential to optimize synthesis methods,explore novel applica-tions,and unlock the full potential of these versatile materials.

Recent progress in flexible sensors based on 2D materials

With the rapid development of the internet of things(IoT)and wearable electronics,the role of flexible sensors is becoming increasingly irreplaceable,due to their ability to process and convert information acquisition.Two-dimensional(2D)materials have been widely welcomed by researchers as sensitive layers,which broadens the range and application of flexible sensors due to the advantages of their large specific surface area,tunable energy bands,controllable thickness at the atomic level,stable mechanical properties,and excellent optoelectronic properties.This review focuses on five different types of 2D materials for monitoring pressure,humidity,sound,gas,and so on,to realize the recognition and conversion of human body and environmental signals.Meanwhile,the main problems and possible solutions of flexible sensors based on 2D materials as sensitive layers are summarized.

Development of Cementitious Materials Utilizing Alkali-activated Yellow River Silt

The possibility of preparing cementitious materials by the alkali-activated method using Yellow River sediment(The second largest river in China)as raw material and the modification effect on different slag addition were investigated.Sodium silicate and calcium hydroxide were used as the activator,and the specimens were prepared by the press molding method.The hydration process,hydration products,pore characteristics,and mechanical properties were investigated using SEM/EDS,FTIR,TG/DTG,XRD,MIP,and uniaxial compressive strength experiments,respectively.The results showed that the compressive strength of the modified yellow river silt-based cementitious material was significantly increased when the water glass dosage was 12 wt%(Ms=1.8)and the slag dosage was 40%,and its 90-day maximum compressive strength could reach 53 MPa.

Distribution of Na+and Mechanical Properties of Hardened Body of Alkali-activated Cementitious Materials

To explore the distribution of and the mechanical properties(compressive strength)of the hardened body of alkali slag-fly ash cementitious materials,this study was conducted by using the XRD,FTIR,SEM/EDS,and other test methods in three conditions:airtight drying(AD),airtight immersion(AI),and airtight soaking(AS).The 1D distribution law of free of hardened body under standard curing conditions was explored.The experimental results show that under standard curing conditions,the 1D distribution of within 0d-3 d shows a∨-shaped distribution,within 3-7 d show a∧-shaped distribution,and within 7-28 d tends to be balanced.The test results of leaching rate show that the free was the most stable under AD conditions and the hardened body bound the most by XRD,FTIR and SEM/EDS.And the compressive strength of the hardened body was the highest.The compressive strength of 28th reached 95.9 MPa.The definite distribution of provides an important reference for the strength development and durability evaluation of the hardened body of alkaliexcited cementitious materials.

Life cycle assessment of alkali-activated materials:a systematic literature review

The physical-mechanical,chemical,and durability characteristics of alkali-activated materials(AAMs)have been widely investigated.However,a critical gap in the literature is the lack of a comprehensive overview of recently published literature regarding the life cycle assessment(LCA)of these binders.This study aims to fill that gap by conducting a systematic literature review of globally published literature on the topic.This paper consolidates knowledge by searching different databases,focusing on LCA studies that used AAMs as pastes,mortars,concretes,bricks,and rammed earth/soil blocks.The selected articles were reviewed and categorized based on precursors,alkaline activators,functional units,system boundaries,life cycle inventory databases,allocation,impact methodologies,and software used.Additionally,this paper also critically analyzes the key challenges of LCA for AAMs.The major challenges were identified as selecting a functional unit,subjectivity in boundary systems,and data interpretation.This work concludes that AAMs show substantial advantages in global warming potential compared to ordinary Portland cement-based materials;however,the average of other categories such as marine ecotoxicity and ozone layer depletion has been reported to be higher than for the reference samples.

人工智能背景下Materials Project数据库在计算材料学课程教学中的应用

该文探讨了在人工智能背景下,Materials Project数据库在计算材料学课程教学中的应用和影响。Materials Project数据库是一个集成了AI和大数据技术的开放获取的材料库,能为学生提供海量的材料晶体结构和物性数据,使教学内容更为丰富,让学生能通过亲自操作获取和分析数据,深入理解微观结构与物性之间的关系。这一新兴的教学模式不仅提升了学生的科研能力和创新思维能力,还有助于培养具备计算材料专业知识和多学科交叉的复合型人才。总体来说,人工智能时代下,大数据的引入为计算材料学课程带来新的活力,并对未来教育改革和实践产生了积极影响。

The Roadmap of 2D Materials and Devices Toward Chips

Due to the constraints imposed by physical effects and performance degra certain limitations in sustaining the advancement of Moore’s law.Two-dimensional(2D)materials have emerged as highly promising candidates for the post-Moore era,offering significant potential in domains such as integrated circuits and next-generation computing.Here,in this review,the progress of 2D semiconductors in process engineering and various electronic applications are summarized.A careful introduction of material synthesis,transistor engineering focused on device configuration,dielectric engineering,contact engineering,and material integration are given first.Then 2D transistors for certain electronic applications including digital and analog circuits,heterogeneous integration chips,and sensing circuits are discussed.Moreover,several promising applications(artificial intelligence chips and quantum chips)based on specific mechanism devices are introduced.Finally,the challenges for 2D materials encountered in achieving circuit-level or system-level applications are analyzed,and potential development pathways or roadmaps are further speculated and outlooked.