This experiment is to study the special resistant induced by the high-speed evaporation surrounding themoving high-temperature particles. An observable equipment was designed, in which the first 11 experiments wereper...This experiment is to study the special resistant induced by the high-speed evaporation surrounding themoving high-temperature particles. An observable equipment was designed, in which the first 11 experiments wereperformed by pouring one or several Zirconia spheres with various high-temperature and a diameter of 3～ 10 mminto a water pool. The particles falling-down speeds were recorded by high-speed photographic instrumentation,and pressures and water temperatures were measured. A comparison between the experiments with cold and hotspheres respectively, employing three different sphere types each, was presented. The experimental data, com-pared with the theory of the evaporation drag model, are nearly identical.展开更多
[目的]气候变化新形势下,进一步筛选适宜西北地区抗寒、抗抽干葡萄砧木品种,可为葡萄免埋土栽培推广提供理论依据和技术支撑。[方法]本文以41Bmgt、Riparia、420Bmgt、101-14、196-17、44-53ma、110R、Rupestris du Lot、SO4、161-490、...[目的]气候变化新形势下,进一步筛选适宜西北地区抗寒、抗抽干葡萄砧木品种,可为葡萄免埋土栽培推广提供理论依据和技术支撑。[方法]本文以41Bmgt、Riparia、420Bmgt、101-14、196-17、44-53ma、110R、Rupestris du Lot、SO4、161-490、1103P、5BB、3309、Leon Millt共14种13年生葡萄砧木为试材,通过测定离体一年生枝条累计失水速率,结合田间调查葡萄砧木存活率和离体一年生枝条抽干率,以此来评价不同葡萄砧木品种抗抽干能力;结合前人研究及砧木品种特性,采用高低温交变试验箱模拟低温的方法,设置4(对照)、-15、-20、-25和-30℃一系列温度梯度水平,测定不同葡萄砧木一年生枝条相对电导率、丙二醛、游离脯氨酸、可溶性糖及可溶性蛋白5个生理生化指标,利用隶属函数法进行综合评价不同葡萄砧木的抗寒性。[结果]不同葡萄砧木的抗抽干能力由强到弱依次为:3309>161-490>196-17>Leon Millt>420Bmgt>44-53ma>Riparia>110R>1103P>SO4>101-14>41Bmgt>5BB>Rupestris du Lot;随着处理温度的降低,不同葡萄砧木枝条的抗寒指标总体呈现上升趋势,但不同品种之间存在差异。根据隶属函数的综合分析,结果显示各葡萄砧木的抗寒性由强到弱依次为:SO4>196-17>Leon Millt>5BB>Riparia>44-53ma>420Bmgt>1103P>3309>110R>Rupestris du Lot>101-14>41Bmgt>161-490。[结论]Riparia、196-17、44-53ma和Leon Millt具有较强的抗抽干能力和抗寒性,可作为我国西北地区免埋土葡萄砧木使用。展开更多
Alternating current poling(ACP)in air by changing poling temperature(70e130℃)and voltages(2e6 kVrms/cm)on pseudo-ternary 0.24 Pb(In_(1/2)Nb_(1/2))O_(3)-0.46 Pb(Mg1/3Nb_(2/3))O3-0.30PbTiO_(3)(PIMN-0.30PT)single crysta...Alternating current poling(ACP)in air by changing poling temperature(70e130℃)and voltages(2e6 kVrms/cm)on pseudo-ternary 0.24 Pb(In_(1/2)Nb_(1/2))O_(3)-0.46 Pb(Mg1/3Nb_(2/3))O3-0.30PbTiO_(3)(PIMN-0.30PT)single crystals(SCs)manufactured by continuous-feeding Bridgman(CF BM)method was investigated.Free dielectric permittivity(εT 33/ε0)and piezoelectric constant(d33)were improved to be 7000 and 2340 pC/N,which were 29%higher than those of direct current poling(DCP)at 90℃ with 4 kV/cm(εT 33/ε0=5440,d_(33)=1810 pC/N).However,phase change temperature(Tpc)decreased from 94℃ to 78℃ as opposite results reported by other groups.We demonstrated that the high temperature(HT)ACP improved piezoelectric performance of CF BM SCs,however,the Tpc were different from other crystal growth method.The well-designed ACP process was a promising method for mass production not only to enhance the electrical properties for the pseudo-ternary SCs but also reduce the risk of breakdown and realizes organic solvent-free poling process.展开更多
In order to constrain the crustal wave velocity structure in the southernTibetan crust and provide insight into the contribution of crustal composition, geothermal gradientand partial melting to the velocity structure...In order to constrain the crustal wave velocity structure in the southernTibetan crust and provide insight into the contribution of crustal composition, geothermal gradientand partial melting to the velocity structure, which is characterized by low average crustalvelocities and widespread presence of low-velocity zone(s), the authors model the crustal velocityand density as functions of depth corresponding to various heat flow values in light of velocitymeasurements at high temperature and high pressure. The modeled velocity and density are regarded ascomparison standards. The comparison of the standards with seismic observations in southern Tibetimplies that the predominantly felsic composition at high heat flow cannot explain the observedvelocity structure there. Hence, the authors are in favor of attributing low average crustalvelocities and low-velocity zone(s) observed in southern Tibet mainly to partial melting. Modelingbased on the experimental results suggests that a melting percentage of 7-12 could account for thelow-velocity zone(s).展开更多
文摘This experiment is to study the special resistant induced by the high-speed evaporation surrounding themoving high-temperature particles. An observable equipment was designed, in which the first 11 experiments wereperformed by pouring one or several Zirconia spheres with various high-temperature and a diameter of 3～ 10 mminto a water pool. The particles falling-down speeds were recorded by high-speed photographic instrumentation,and pressures and water temperatures were measured. A comparison between the experiments with cold and hotspheres respectively, employing three different sphere types each, was presented. The experimental data, com-pared with the theory of the evaporation drag model, are nearly identical.
文摘[目的]气候变化新形势下,进一步筛选适宜西北地区抗寒、抗抽干葡萄砧木品种,可为葡萄免埋土栽培推广提供理论依据和技术支撑。[方法]本文以41Bmgt、Riparia、420Bmgt、101-14、196-17、44-53ma、110R、Rupestris du Lot、SO4、161-490、1103P、5BB、3309、Leon Millt共14种13年生葡萄砧木为试材,通过测定离体一年生枝条累计失水速率,结合田间调查葡萄砧木存活率和离体一年生枝条抽干率,以此来评价不同葡萄砧木品种抗抽干能力;结合前人研究及砧木品种特性,采用高低温交变试验箱模拟低温的方法,设置4(对照)、-15、-20、-25和-30℃一系列温度梯度水平,测定不同葡萄砧木一年生枝条相对电导率、丙二醛、游离脯氨酸、可溶性糖及可溶性蛋白5个生理生化指标,利用隶属函数法进行综合评价不同葡萄砧木的抗寒性。[结果]不同葡萄砧木的抗抽干能力由强到弱依次为:3309>161-490>196-17>Leon Millt>420Bmgt>44-53ma>Riparia>110R>1103P>SO4>101-14>41Bmgt>5BB>Rupestris du Lot;随着处理温度的降低,不同葡萄砧木枝条的抗寒指标总体呈现上升趋势,但不同品种之间存在差异。根据隶属函数的综合分析,结果显示各葡萄砧木的抗寒性由强到弱依次为:SO4>196-17>Leon Millt>5BB>Riparia>44-53ma>420Bmgt>1103P>3309>110R>Rupestris du Lot>101-14>41Bmgt>161-490。[结论]Riparia、196-17、44-53ma和Leon Millt具有较强的抗抽干能力和抗寒性,可作为我国西北地区免埋土葡萄砧木使用。
文摘Alternating current poling(ACP)in air by changing poling temperature(70e130℃)and voltages(2e6 kVrms/cm)on pseudo-ternary 0.24 Pb(In_(1/2)Nb_(1/2))O_(3)-0.46 Pb(Mg1/3Nb_(2/3))O3-0.30PbTiO_(3)(PIMN-0.30PT)single crystals(SCs)manufactured by continuous-feeding Bridgman(CF BM)method was investigated.Free dielectric permittivity(εT 33/ε0)and piezoelectric constant(d33)were improved to be 7000 and 2340 pC/N,which were 29%higher than those of direct current poling(DCP)at 90℃ with 4 kV/cm(εT 33/ε0=5440,d_(33)=1810 pC/N).However,phase change temperature(Tpc)decreased from 94℃ to 78℃ as opposite results reported by other groups.We demonstrated that the high temperature(HT)ACP improved piezoelectric performance of CF BM SCs,however,the Tpc were different from other crystal growth method.The well-designed ACP process was a promising method for mass production not only to enhance the electrical properties for the pseudo-ternary SCs but also reduce the risk of breakdown and realizes organic solvent-free poling process.
基金supported by the Key Basic Research and Development Program of China(G19980407000)the National Natural Science Foundation of China(40072062)+1 种基金the Foundation of the Open Laboratory of Tectonophysics,China Seismological Bureauthe Post-Doctoral Grant of Ministry of Education,China.
文摘In order to constrain the crustal wave velocity structure in the southernTibetan crust and provide insight into the contribution of crustal composition, geothermal gradientand partial melting to the velocity structure, which is characterized by low average crustalvelocities and widespread presence of low-velocity zone(s), the authors model the crustal velocityand density as functions of depth corresponding to various heat flow values in light of velocitymeasurements at high temperature and high pressure. The modeled velocity and density are regarded ascomparison standards. The comparison of the standards with seismic observations in southern Tibetimplies that the predominantly felsic composition at high heat flow cannot explain the observedvelocity structure there. Hence, the authors are in favor of attributing low average crustalvelocities and low-velocity zone(s) observed in southern Tibet mainly to partial melting. Modelingbased on the experimental results suggests that a melting percentage of 7-12 could account for thelow-velocity zone(s).
