AC impedance is a new method to study the changes of pore structure and the hydration degree during the hydration and hardening process of cement paste by the change of the electrochemical parameters. Employing AC imp...AC impedance is a new method to study the changes of pore structure and the hydration degree during the hydration and hardening process of cement paste by the change of the electrochemical parameters. Employing AC impedance method, we studied the hydration and hardening process of cement paste with fly ash and slag, and analyzed the influence of different hydration age, water-binder ratio and mineral admixture on the impedance parameters. Moreover, we compared the results with those by the conventional porosity testing method and X-ray diffraction method. The results showed that AC impedance could be taken as a new technology in cement and concrete research.展开更多
The ultrafine CexMg0.06Zr1-xO1.94 （ x = 0 16% ） powders were synthesized by a chemical co-precipitated method. The pressed compacts were sintered in air at 1300, 1400, 1500, 1600℃ for 3 h, respectively. The phase o...The ultrafine CexMg0.06Zr1-xO1.94 （ x = 0 16% ） powders were synthesized by a chemical co-precipitated method. The pressed compacts were sintered in air at 1300, 1400, 1500, 1600℃ for 3 h, respectively. The phase of the ceramics was characterized by the X-ray diffraction （XRD） method. The conductivity of the ceramics was measured by the AC complex impedance technique at 700- 1200 ℃. The ratio of the cubic phase in the ceramics improves with increasing CeO2 content, leading to a enlargement of the oxygen ionic migration channel. The contact resistance between conductive phase particles decreases with increasing CeO2 content, leading to a lower migration hindrance of the oxygen ionic. Consequently, the ionic conductivity of the ceramics improves with increas- ing CeO2 content. Additionally, an analysis for this phenomenon was also presented.展开更多
A novel method for detecting early damage at the steel-concrete interface due to external loading based on AC impedance spectroscopy technology was proposed.Firstly,alkali pretreatment was introduced to ensure the acc...A novel method for detecting early damage at the steel-concrete interface due to external loading based on AC impedance spectroscopy technology was proposed.Firstly,alkali pretreatment was introduced to ensure the accuracy and repeatability of the AC impedance test.Secondly,the AC impedance spectroscopy between the steel bar and concrete surface of different bonding positions was tested,and then the physical quantities reflecting the bonding damage condition were obtained by equivalent circuit fitting.Theoretical debonding position calculation and AC conductive structure analysis indicate that the change of interface resistance and interface capacitance can seize the development of bonding damage during the loading process.As the interface damage develops,obvious changes in interface resistance and interface capacitance are observed,and they cannot be recovered after unloading.展开更多
A sustainable society requires an increase in electrified vehicles(xEVs) with a low environmental impact. Among various types of xEVs, battery electric vehicles (BEVs) with lithium-ion batteries(LIBs) have received co...A sustainable society requires an increase in electrified vehicles(xEVs) with a low environmental impact. Among various types of xEVs, battery electric vehicles (BEVs) with lithium-ion batteries(LIBs) have received considerable research attention.展开更多
The paper presents ac impedance behaviours of phenyl iso-thiocyanate adsorbed on Pt electrode.Nyquist plots are analysed and simulated,and parameters of relative equivalent circuits are obtained.
The impedance diagram of hdrogen storage electrodes(AH electrodes )displayed twosemicircles.Thelow frequency one is affected by cycle number and composition of MH electrodes.
AC impedance spectroscopy in pure room temperature ionic liquids （RTILs） and RTIL-water mixture was measured at the temperature of range from 30 ℃ down to -30 ℃. The cations of RTILs are N,N-diethyl-N-methyl-N-（2...AC impedance spectroscopy in pure room temperature ionic liquids （RTILs） and RTIL-water mixture was measured at the temperature of range from 30 ℃ down to -30 ℃. The cations of RTILs are N,N-diethyl-N-methyl-N-（2-methoxyethyl） ammonium （[DEME]）, 1-ethyl-3-methylimidazolium （[C2mim]） and l-butyl-3-methylimidazolium （[Camim]）, the anions are tetrafluoroborate （[BF4]） and bis（trifluoromethanesulfonyl）imide （[TFSI]）. In all pure RTILs, there are two kinds of local minima in real part of the AC impedance Zreal. By adding water to [DEME][BF4] （0 mol% 〈 x 〈 94 mol%） at room temperature, the local minimum value at higher frequency decreased remarkably at the fixed frequency with increasing water concentration. Above 94 mol% H20, a quite different profile of the AC impedance spectroscopy was obtained. In addition to Zreal. temperature dependence of an imaginary part of the impedance Zimag had an isosbestic point below 94 mol%. The isosbestic point disappeared above 94 mol%. The isosbestic point in Zing reveals an interaction between [DEME][BFa] and H2O.展开更多
采用交流阻抗法和极化曲线法,研究了两种环境友好型水处理药剂聚天冬氨酸和钨酸钠的单一配方及其复配对3%N aC l溶液中黄铜的缓蚀效果。研究表明:聚天冬氨酸和钨酸钠各自的单一配方对于黄铜均具有一定的缓蚀效果,其中聚天冬氨酸在浓度为...采用交流阻抗法和极化曲线法,研究了两种环境友好型水处理药剂聚天冬氨酸和钨酸钠的单一配方及其复配对3%N aC l溶液中黄铜的缓蚀效果。研究表明:聚天冬氨酸和钨酸钠各自的单一配方对于黄铜均具有一定的缓蚀效果,其中聚天冬氨酸在浓度为40 m g/L时对黄铜的缓蚀效果最佳,钨酸钠在浓度为40 m g/L时缓蚀效果最佳。在缓蚀剂总浓度为40 m g/L时,聚天冬氨酸与钨酸钠配比为3∶1时对黄铜的缓蚀效果最佳,且具有缓蚀协同效应。展开更多
基金Funded the Major Sate Basic Research Development Program of China(973 Program)(No.2009CB23201)Beijing Natural Science Foundation(No.8100001)National Natural Science Foundation of China(No.51278014)
文摘AC impedance is a new method to study the changes of pore structure and the hydration degree during the hydration and hardening process of cement paste by the change of the electrochemical parameters. Employing AC impedance method, we studied the hydration and hardening process of cement paste with fly ash and slag, and analyzed the influence of different hydration age, water-binder ratio and mineral admixture on the impedance parameters. Moreover, we compared the results with those by the conventional porosity testing method and X-ray diffraction method. The results showed that AC impedance could be taken as a new technology in cement and concrete research.
文摘The ultrafine CexMg0.06Zr1-xO1.94 （ x = 0 16% ） powders were synthesized by a chemical co-precipitated method. The pressed compacts were sintered in air at 1300, 1400, 1500, 1600℃ for 3 h, respectively. The phase of the ceramics was characterized by the X-ray diffraction （XRD） method. The conductivity of the ceramics was measured by the AC complex impedance technique at 700- 1200 ℃. The ratio of the cubic phase in the ceramics improves with increasing CeO2 content, leading to a enlargement of the oxygen ionic migration channel. The contact resistance between conductive phase particles decreases with increasing CeO2 content, leading to a lower migration hindrance of the oxygen ionic. Consequently, the ionic conductivity of the ceramics improves with increas- ing CeO2 content. Additionally, an analysis for this phenomenon was also presented.
基金Funded by the Opening Funds of State Key Laboratory of Building Safety and Built Environment and National Engineering Research Center of Building Technology (No.BSBE2019-07)the Young Talent Support Program of Hebei Institutions of Higher Learning (No.BJ2017019)the National Natural Science Foundation of China (No.51808357)。
文摘A novel method for detecting early damage at the steel-concrete interface due to external loading based on AC impedance spectroscopy technology was proposed.Firstly,alkali pretreatment was introduced to ensure the accuracy and repeatability of the AC impedance test.Secondly,the AC impedance spectroscopy between the steel bar and concrete surface of different bonding positions was tested,and then the physical quantities reflecting the bonding damage condition were obtained by equivalent circuit fitting.Theoretical debonding position calculation and AC conductive structure analysis indicate that the change of interface resistance and interface capacitance can seize the development of bonding damage during the loading process.As the interface damage develops,obvious changes in interface resistance and interface capacitance are observed,and they cannot be recovered after unloading.
基金partially supported by the New Energy Promotion Council (NEPC)。
文摘A sustainable society requires an increase in electrified vehicles(xEVs) with a low environmental impact. Among various types of xEVs, battery electric vehicles (BEVs) with lithium-ion batteries(LIBs) have received considerable research attention.
文摘The paper presents ac impedance behaviours of phenyl iso-thiocyanate adsorbed on Pt electrode.Nyquist plots are analysed and simulated,and parameters of relative equivalent circuits are obtained.
文摘The impedance diagram of hdrogen storage electrodes(AH electrodes )displayed twosemicircles.Thelow frequency one is affected by cycle number and composition of MH electrodes.
文摘AC impedance spectroscopy in pure room temperature ionic liquids （RTILs） and RTIL-water mixture was measured at the temperature of range from 30 ℃ down to -30 ℃. The cations of RTILs are N,N-diethyl-N-methyl-N-（2-methoxyethyl） ammonium （[DEME]）, 1-ethyl-3-methylimidazolium （[C2mim]） and l-butyl-3-methylimidazolium （[Camim]）, the anions are tetrafluoroborate （[BF4]） and bis（trifluoromethanesulfonyl）imide （[TFSI]）. In all pure RTILs, there are two kinds of local minima in real part of the AC impedance Zreal. By adding water to [DEME][BF4] （0 mol% 〈 x 〈 94 mol%） at room temperature, the local minimum value at higher frequency decreased remarkably at the fixed frequency with increasing water concentration. Above 94 mol% H20, a quite different profile of the AC impedance spectroscopy was obtained. In addition to Zreal. temperature dependence of an imaginary part of the impedance Zimag had an isosbestic point below 94 mol%. The isosbestic point disappeared above 94 mol%. The isosbestic point in Zing reveals an interaction between [DEME][BFa] and H2O.
文摘采用交流阻抗法和极化曲线法,研究了两种环境友好型水处理药剂聚天冬氨酸和钨酸钠的单一配方及其复配对3%N aC l溶液中黄铜的缓蚀效果。研究表明:聚天冬氨酸和钨酸钠各自的单一配方对于黄铜均具有一定的缓蚀效果,其中聚天冬氨酸在浓度为40 m g/L时对黄铜的缓蚀效果最佳,钨酸钠在浓度为40 m g/L时缓蚀效果最佳。在缓蚀剂总浓度为40 m g/L时,聚天冬氨酸与钨酸钠配比为3∶1时对黄铜的缓蚀效果最佳,且具有缓蚀协同效应。
