Technology and mechanism of a new protein-based core sand for aluminum casting

The protein based binding material is from natural products, which is nontoxic and recyclable. This kind of green binder is earnestly needed by aluminum casting products. The new protein based core possesses higher strength and easier shakeout. Its tensile strength is close to that of common resin sands. The micro mechanism of protein binder was investigated by using infrared spectrum, chemical element analysis, SEM and thermal lost mass analysis.

Characterization of mechanical properties of aluminum cast alloy at elevated temperature

The tensile response, the low cycle fatigue （LCF） resistance, and the creep behavior of an aluminum （A1） cast alloy are studied at ambient and elevated temperatures. A non-contact real-time optical extensometer based on the digital image correlation （DIC） is developed to achieve strain measurements without damage to the specimen. The optical extensometer is validated and used to monitor dynamic strains during the mechanical experiments. Results show that Young＇s modulus of the cast alloy decreases with the increasing temperature, and the percentage elongation to fracture at 100 ℃ is the lowest over the temperature range evaluated from 25 ℃ to 300 ℃. In the LCF test, the fatigue strength coefficient decreases, whereas the fatigue strength exponent increases with the rising temperature. The fatigue ductility at 100 ℃. As expected, the resistance to and changes from 200 ℃ to 300 ℃. coefficient and exponent reach maximum values creep decreases with the increasing temperature

Mechanism and simulation of external cooling in aluminum casting-rolling process

External cooling technology is one of the key technologies to realize fast-casting-rolling process of aluminum, i.e. using compulsive cooling on the external surface of rollers and aluminum plate to improve the cooling ability of system, increase casting-rolling speed, and enhance the quality of aluminum plate. Heat transfer model of casting-rolling process was proposed and the characteristics of the temperature field of roller-plate system were analyzed. The influences of external cooling surface of the plate and the roller on the temperature field of the roller and the aluminum plate and the casting-rolling speed were discussed, and the relationship between external cooling and internal cooling were also analyzed. Experiment results show that, with the increase of casting-rolling speed, the influence of cooling plate surface on increasing casting-rolling speed was gradually decreased, but that of cooling roller surface was enhanced. Different mechanisms of external cooling plate surface and roller surface for improving casting-rolling speed account for this phenomenon.

基于ProCAST的一模多腔YL112铝合金压铸件数值模拟及工艺优化

针对YL112压铸铝合金一模多铸产品的组织性能均一性需求,采用ProCAST软件对典型一模多铸工艺进行模拟,比较了两种不同充型顺序的压铸方案。结果表明:基于顺序凝固一模多腔压铸件由于充型与凝固过程的温度场分布不均,导致近浇口端铸件出现明显缩松缩孔缺陷,造成铸件性能均一性差。后续采用等流程浇注系统,实现一模多腔铸件同时充型凝固过程,改善了铸件温度场分布,减少了工艺缺陷。经过实际生产验证,获得了组织性能均一性好的压铸件。

Effect of Ti and Ce Microalloy on Microstructure and Properties of Al-Si-Cu-Zr-Sr Cast Aluminum Alloy

The effect of Ti and Ce microalloying on the mechanical properties of Al-9Si-3.5Cu-0.2Zr-0.1Sr cast aluminum alloy was investigated,and it was hoped that the cast aluminum alloy with excellent comprehensive properties could be obtained.On the basis of Zr-Sr microalloyed cast aluminum alloy(Al-9Si-3.5Cu-0.2Zr-0.1Sr),the effects of 0.2Zr-0.1Sr-0.16Ti ternary microalloying and 0.2Zr-0.1Sr-0.16Ti-0.1Ce quaternary microalloying on the microstructure and properties of the alloy were investigated.The experimental results show that compared with Zr-Sr microalloying,Zr-Sr-Ti microalloying and Zr-Sr-Ti-Ce microalloying can effectively refine the microstructure,improve the modification effect of Si phase,and promote the improvement of Al_(2)Cu phase,thus improving the properties.The higher the degree of microalloying,the hardness is gradually increasing,but the electrical conductivity is gradually decreasing.Zr-Sr-Ti microalloying can increase the tensile strength of the alloy to 400.07 MPa and the elongation to 9.5%.Zr-Sr-Ti-Ce microalloying do not continue to improve the properties of the alloy,and the tensile strength and elongation after fracture decrease to a certain extent due to the addition of Ce.Therefore,the best comprehensive properties can be obtained by ZrSr-Ti microalloying(Al-9Si-3.5Cu-0.2Zr-0.1Sr-0.16Ti).

GIGACYCLE FATIGUE BEHAVIOR OF CAST ALUMINUM IN TENSION AND TORSION LOADING

An improved understanding of fatigue behavior of a cast aluminum alloy（2-AS5U3G-Y35）in very high cycle regime is developed through the ultrasonic fatigue test in axial and torsion loading.The new developed torsion fatigue system is presented.The effects of loading condition and frequency on the very high cycle fatigue（VHCF）are investigated.The cyclic loading in axial and torsion at 35 Hz and 20 kHz with stress ratio R=-1 is used respectively to demonstrate the effect of loading condition.S-N curves show that the fatigue failure occurs in the range of 105—1010 cycles in axial or torsion loading and the asymptote of S-N curve is inclined,but no fatigue limit exists under the torsion and axial loading condition.The fatigue fracture surface shows that the fatigue crack initiates from the specimen surface subjected to the cyclic torsion loading.It is different from the fatigue fracture characteristic in axial loading in which fatigue crack initiates from subsurface defect in very high cycle regime.The fatigue initiation is on the maximum shear plane,the overall crack orientation is on a typical spiral 45° to the fracture plane and it is the maximum principle stress plane.The clear shear strip in the torsion fatigue fracture surface shows that the torsion fracture is the shear fracture.

Die Casting Mold Design of the Thin-walled Aluminum Case by Computational Solidification Simulation

Recently, demand for the lightweight alloy in electric/electronic housings has been greatly increased. However, among the lightweight alloys, aluminum alloy thin-walled die casting is problematic because it is quite difficult to achieve sufficient fluidity and feedability to fill the thin cavity as the wall thickness becomes less than 1mm. Therefore, in this study, thin-walled die casting of aluminum （Al-Si-Cu alloy： ALDC 12） in size of notebook computer housing and thickness of 0.8 mm was investigated by solidification simulation （MAGMA soft） and actual casting experiment （Buhler Evolution B 53D）. Three different types of gating design, finger, tangential and split type with 6 vertical runners, were simulated and the results showed that sound thin-walled die casting was possible with tangential and split type gating design because those gates allowed aluminum melt to flow into the thin cavity uniformly and split type gating system was preferable gating design comparing to tangential type gating system at the point of view of soundness of casting and distortion generated after solidification. Also, the solidification simulation agreed well with the actual die-casting and the casting showed no casting defects and distortion.

As-Cast Acicular Ductile Aluminum Cast Iron

The effects of nickel （2.2 %） and molybdenum （0.6 % ） additions on the kinetics, microstrueture, and mechanical properties of ductile aluminum cast iron were studied under the as-cast and tempered conditions. Test bars machined from cast to size samples were used for mechanical and metallurgical studies. The results showed that adding nickel and molybdenum to the base iron produced an upper bainitic structure, resulting in an increase in strength and hardness. The same trend was shown when the test bars were tempered at 300 ℃in the range of 300 ℃ to 400 ℃. The elongation increased with increasing the temperature from 300 ℃ to 400 ℃. The carbon content of the retained austenite also increased with increasing the temperature. The results also showed that the kinetics, microstructure, and mechanical properties of this iron were similar to those of Ni-Mo alloyed silicon ductile iron.

X-Ray Image Interpretation Guide for Aviation Aluminum Alloy Castings

The purpose of this paper is to introduce the basic steps of X-ray image interpretation of aviation castings,so as to provide a learning guidance for beginners and reduce the exploration time.Among them,the introduction of specifications,the requirements for image quality,and the application of reference radiographs are just a sorting out the key points.If there is a need for practical application,we should conduct a deeper exploration and understanding of each specification,not just cite this article.

基于ProCAST的铝合金罩盖重力铸造成型的模拟优化

铝合金罩盖外形复杂,综合性能和质量要求高。基于ProCAST软件对铝合金罩盖重力铸造成型进行仿真分析,对铝合金罩盖结构和重力铸造成型参数进行优化,并对优化前后铸件进行对比。结果表明:铝合金罩盖铸件体收缩率较大,需要设计冒口补缩且铸件需要进行热处理;铝合金罩盖重力铸造成型的加强筋连接汇合处的缩孔和缩松较多、凝固特性较差;优化的铝合金罩盖结构和重力铸造成型参数可以改善铸件的壁厚及缩孔缩松。

Effect of Electromagnetic Frequency on Microstructures of Continuous Casting Aluminum Alloys

The relationship between electromagnetic frequency and microstructures of continuous casting aluminum alloys was studied. 7075 aluminum alloy ingot of 100 mm in diameter was produced by electromagnetic continuous casting process, the microstructures of as-cast ingot was examined by scanning electron microscopy (SEM) equipped with energy dispersive spectrometer (EDS). The results showed that electromagnetic frequency greatly influenced segregation and microstructures of as-cast ingot, and product quality can be guaranteed by the application of a proper frequency. Electromagnetic frequency plays a significant role in solute redistribution; low frequency is more efficient for promoting solution of alloying elements.

Latest advances and developments in aluminum shape casting

With the increasing use of aluminum shape castings in structural applications in the automotive and aerospace industries,assurance of cast product integrity and performance has become critical in both design and manufacturing.In this paper,the latest understanding of the relationship between casting quality and mechanical properties of aluminum castings is summarized.Newly developed technologies for alloy design,melting and melt treatment,casting and heat treatment processes in aluminum casting are reviewed.The mechanical properties of aluminum castings strongly depend upon their microstructure constituents and particularly cast defect population and distribution.To produce quality castings with quantifiable properties,the key is to control multi-scale defects and microstructure in the casting.Robust design and development of high integrity aluminum castings through Integrated Computational Materials Engineering(ICME) approach is also discussed.The most effective way to optimize the processes and achieve the desirable mechanical properties is through the development and exploitation of robust and accurate multi-scale computational models.

Numerical Simulation of Microporosity Evolution of Aluminum Alloy Castings

A mathematical model to calculate the size and distribution of microporosities was studied and coupled with a stochastic microstructure evolution model. The model incorporates various solidification phenomena such as grain structure evolution, solidification shrinkage, interdendritic fluid flow and formation and growth of pores during solidification processes. The nucleation and growth of grains were modeled with a cellular automaton method that utilizes the results from a macro scale modeling of the solidification process. Experiments were made to validate the proposed models. The calculated results of aluminum alloy castings agreed with the experimental measurements.

Numerical simulation of temperature field in horizontal core-filling continuous casting for copper cladding aluminum rods

The steady-state temperature field of horizontal core-filling continuous casting （HCFC） for producing copper cladding aluminum rods was simulated by finite element method to investigate the effects of key processing parameters on the positions of solid-liquid interfaces （SLIs） of copper and aluminum. It is found that mandrel tube length and mean withdrawing speed have significant effects on the SLI positions of both copper and aluminum. Aluminum casting temperature （TAI） （1003-1123 K） and secondary cooling water flux （600-900 L.h-1） have little effect on the SLI of copper but cause the SLI of aluminum to move 2-4 mm. When TA1 is in a range of 1043-1123 K, the liquid aluminum can fill continuously into the pre-solidified copper tube. Based on the numerical simulation, reasonable processing parameters were determined.

Effects of microstructural heterogeneity on fatigue properties of cast aluminum alloys

Cast Al alloys are widely employed for engine components,structural parts,gear box,chassis,etc.and subjected to mechanical cyclic load during operation.The accurate fatigue life prediction of these alloys is essential for normal operation as fatigue cracks initiated during operation induce the lubrication oil leak and serious safety hazard.Microstructural heterogeneity,including shrinkage/gaspores and secondary phase particles,is the most detrimental factor that affects fatigue life of cast Al alloys.The approximate fatigue life cycles could be estimated based on the size distribution and locations of shrinkage pores/defects.The relationship between crack population and stress was reported by statistical distributions and the cumulative probability for cast Al alloys fail at a certain stress could be predicted by combination of Paris law and pore size distribution.Pore depth was found to dominate the stress field around the pore on the surface and the maximum stress increases sharply when the pore intercepted with the surface at its top.The microstructure of cast Al alloys usually is composed of primary Al dendrites,eutectic silicon,Fe-rich particles and other intermetallic particles are dependent upon alloy composition and heat treatment.The coalescence of microcracks initiated from the fractured secondary phases was clearly found and can accelerate the initiation and propagation of the fatigue cracks.A link between defect features and the fatigue strength needs to be established through a good understanding of the fatigue damage mechanisms associated with the microstructural features under specific loading conditions.This paper reviews the influences of shrinkage/gaspores and secondary phase particles,formed during casting process,on the fatigue life of Al-Si-Mg cast Al alloys.

Research on microstructure in as-cast 7A55 aluminum alloy and its evolution during homogenization

The microstructure of the as-cast 7A55 aluminum alloy and its evolution during homogenization were investigated by means of optical microscopy （OM）, scanning electron microscopy （SEM）, energy dispersive spectroscopy （EDS）, X-ray diffraction （XRD）, and differential scanning calorimetry （DSC） analysis. The results indicate that the microstructure of the as-cast 7A55 aluminum alloy mainly consists of the dendritic network of aluminum solid solution, Al/AIZnMgCu eutectic phases, and intermetaUic compounds MgZn2, Al2CuMg, Al7Cu2Fe, and Al23CuFe4. After homogenization at 470℃ for 48 h, Al/AlZnMgCu eutectic phases are dissolved into the matrix, and a small amount of high melting-point secondary phases were formed, which results in an increasing of the starting melting temperature of 7A55 aluminum alloy The high melting-point secondary phases were eliminated mostly when the homogenization time achieved to 72 h. Therefore, the reasonable homogenization heat treatment process for 7A55 aluminum alloy ingots was chosen as 470℃/72 h.

The Role of Particles in Fatigue Crack Propagation of Aluminum Matrix Composites and Casting Aluminum Alloys

Fatigue crack propagation （FCP） behaviors were studied to understand the role of SiC particles in 10 wt pct SiCp/A2024 composites and Si particles in casting aluminum alloy A356. The results show that a few particles appeared on the fracture surfaces in SiCp/Al composites even at high △K region, which indicates that cracks propagated predominantly within the matrix avoiding SiC particles due to the high strength of the particles and the strong particle/matrix interface. In casting aluminum alloy, Si particle debonding was more prominent.Compared with SiCp/Al composite, the casting aluminum alloy exhibited lower FCP rates, but had a slight steeper slope in the Paris region. Crack deflection and branching were found to be more remarkable in the casting aluminum alloy than that in the SiCp/Al composites, which may be contributed to higher FCP resistance in casting aluminum alloy.

Microstructure and properties of vacuum counter-pressure cast aluminum alloy

The microstructure and properties of vacuum counter-pressure cast aluminum alloy were studied. Results indicated that under the condition of vacuum counter-pressure, liquid melts fill mould cavity under the vacuum and crystallize under high pressure which have very good effect on nucleation and solidification feeding. Compared with gravity casting, the microstructure of vacuum counter-pressure cast aluminum alloy is much finer and more uniformly distributed. Mechanical properties of vacuum counter-pressure cast aluminum alloy are improved significantly.

Microstructure of aluminum twin-roll casting based on Cellular Automation

Nucleation and growth model based on Cellular Automation(CA) incorporated with macro heat transfer calculation was presented to simulate the microstructure of aluminum twin-roll casting. The dynamics model of dendrite tip (KGT model) was amended in view of characteristics of aluminum twin-roll casting. Through the numerical simulation on solidification structure under different casting speeds, it can be seen that when the casting speed is 1.3 m/min, that is, under conditions of conventional roll casting, coarse columnar grains dominate the solidification structure, and equiaxed grains exist in the center of aluminum strip. When the casting speed continuously increases to 8 m/min, that is, under the conditions of thin-gauge high-speed casting, columnar grains in solidification structure all convert into equiaxed grains. Experimental and numerical results agree well.

Non-dendritic structural 7075 aluminum alloy by liquidus cast and its semi-solid compression behavior

Fine, equiaxed, non dendritic structure needed by semi solid processing was obtained by liquidus cast, i.e. 7075 wrought aluminum alloy cast from liquidus temperature. The microstructures after heat treatment at different temperatures and time in the semi solid range were observed, and the compression deformation behavior at different temperatures (490～600 ℃) and strain rates (5×10 -3 ～5s -1 ) was investigated by means of Gleeble 1500 thermal mechanical simulator. The results show that the deformation resistance of the non dendritic structure attained by liquidus cast in semi solid is remarkably lower than that of conventional dendritic structure. The formability of non dendritic structure is better than that of dendritic structure.