The synergistic reaction of photocatalysis and advanced oxidation is a valid strategy for the degradation of harmful antibiotic wastewater.Herein,carbon dots(CDs)modified MIL-101(Fe)octahedrons to form CDs/MIL-101(Fe)...The synergistic reaction of photocatalysis and advanced oxidation is a valid strategy for the degradation of harmful antibiotic wastewater.Herein,carbon dots(CDs)modified MIL-101(Fe)octahedrons to form CDs/MIL-101(Fe)composite photocatalyst was synthesized for visible light-driven photocatalytic/persulfate(PS)-activated tetracycline(TC)degradation.The electron spin resonance(ESR)spectra,scavenging experiment and electrochemical analysis were carried out to reveal that the high visible light-driven photocatalytic degradation activity of TC over CDs/MIL-101(Fe)photocatalysts is not only ascribed to the production of free active radicals in the CDs/MIL-101(Fe)/PS system(·OH,·SO_(4-),^(1)O_(2),h^(+)and·O_(2)^(-))but also attributed to the consumption of electrons caused by the PS,which can suppress the recombination of photo-generated carriers as well as strong light scattering and electron trapping effects of CDs.Finally,the possible degradation pathways were proposed by analyzing intermediates via liquid chromatography-mass spectrometry technique.This research presents a rational design conception to construct a CDs/PS-based photocatalysis/advanced oxidation technology with high-efficient degradation activity for the remediation of organic antibiotic pollutant wastewater and for the improvement of carrier transport kinetics of photocatalysts.展开更多
Soil salinity seriously affects the utilization of farmland and threatens the crop production.Here,a selenium-nitrogen-co-doped carbon dots was developed,which increased rice seedling growth and alleviated its inhibit...Soil salinity seriously affects the utilization of farmland and threatens the crop production.Here,a selenium-nitrogen-co-doped carbon dots was developed,which increased rice seedling growth and alleviated its inhibition by salt stress by foliar spraying.The treatment activated Ca^(2+)and jasmonic acid signaling pathways and increased iron homeostasis,antioxidant defense,and cell wall development of rice seedlings.It could be used to increase crop resistance to environmental stress.展开更多
Over the past few decades,photocatalysis technology has received extensive attention because of its potential to mitigate or solve energy and environmental pollution problems.Designing novel materials with outstanding...Over the past few decades,photocatalysis technology has received extensive attention because of its potential to mitigate or solve energy and environmental pollution problems.Designing novel materials with outstanding photocatalytic activities has become a research hotspot in this field.In this study,we prepared a series of photocatalysts in which BiOCl nanosheets were modified with carbon quantum dots(CQDs)to form CQDs/BiOCl composites by using a simple solvothermal method.The photocatalytic performance of the resulting CQDs/BiOCl composite photocatalysts was assessed by rhodamine B and tetracycline degradation under visible-light irradiation.Compared with bare BiOCl,the photocatalytic activity of the CQDs/BiOCl composites was significantly enhanced,and the 5 wt%CQDs/BiOCl composite exhibited the highest photocatalytic activity with a degradation efficiency of 94.5%after 30 min of irradiation.Moreover,photocatalytic N_(2)reduction performance was significantly improved after introducing CQDs.The 5 wt%CQDs/BiOCl composite displayed the highest photocatalytic N_(2)reduction performance to yield NH_3(346.25μmol/(g h)),which is significantly higher than those of 3 wt%CQDs/BiOCl(256.04μmol/(g h)),7 wt%CQDs/BiOCl(254.07μmol/(g h)),and bare BiOCl(240.19μmol/(g h)).Our systematic characterizations revealed that the key role of CQDs in improving photocatalytic performance is due to their increased light harvesting capacity,remarkable electron transfer ability,and higher photocatalytic activity sites.展开更多
In this work,p⁃phenylenediamine and L⁃cysteine were used as raw materials,and water⁃soluble N,S co⁃doped carbon dots(N,S⁃CDs)with excellent performance were prepared through a one⁃step solvothermal method.The morpholo...In this work,p⁃phenylenediamine and L⁃cysteine were used as raw materials,and water⁃soluble N,S co⁃doped carbon dots(N,S⁃CDs)with excellent performance were prepared through a one⁃step solvothermal method.The morphology and structure of N,S⁃CDs were characterized by transmission electron microscope,X⁃ray diffrac⁃tion,Fourier transform infrared spectroscopy,and X⁃ray photoelectron spectroscopy,and the basic photophysical properties were investigated via UV⁃Vis absorption spectra and fluorescence spectra.Meanwhile,the N,S⁃CDs have excellent luminescence stability with pH,ionic strength,radiation time,and storage time.Experimental results illus⁃trated the present sensor platform exhibited high sensitivity and selectivity in response to baicalein with a detection limit of 85 nmol·L-1.The quenching mechanism is proved to be the inner filter effect.In addition,this sensor can also detect baicalein in biofluids(serum and urine)with good accuracy and reproducibility.展开更多
Liquid metal(LM)and liquid metal alloys(LMs)possess unique physicochemical features,which have become emerging and functionalized materials that are attractive applicants in various fields.Herein,uniform LM nanodrople...Liquid metal(LM)and liquid metal alloys(LMs)possess unique physicochemical features,which have become emerging and functionalized materials that are attractive applicants in various fields.Herein,uniform LM nanodroplets armored by carbon dots(LMD@CDs)were prepared and exhibited high colloidal stability in various solvents,as well as water.After optimization,LMD@CDs can be applied as functional additives for the 3D/4D printing of hydrogel and cross-linked resin through digital light processing(DLP).The light absorption of LMD@CDs not only improved the printing accuracy,but also led to the cross-linking density differential during the post-curing process.Base on the cross-linking density differential of soft hydrogel and photothermal performance of the LM,the 3D printed objects can exhibit stimulus responses to both water and laser irradiation.Additionally,the CDs shell and LM core of LMD@CDs provide the printed objects interesting photoluminescence and electric conductivity capabilities,respectively.We deduce this versatile 3D/4D printing system would provide a new platform for the preparation of multi-functional and stimuli-responsive advance materials.展开更多
SnO_(2) has been extensively investigated as an anode material for sodium-ion batteries(SIBs)and potassium-ion batteries(PIBs)due to its high Na/K storage capacity,high abundance,and low toxicity.However,the sluggish ...SnO_(2) has been extensively investigated as an anode material for sodium-ion batteries(SIBs)and potassium-ion batteries(PIBs)due to its high Na/K storage capacity,high abundance,and low toxicity.However,the sluggish reaction kinetics,low electronic conductivity,and large volume changes during charge and discharge hinder the practical applications of SnO_(2)-based electrodes for SIBs and PIBs.Engineering rational structures with fast charge/ion transfer and robust stability is important to overcoming these challenges.Herein,S-doped SnO_(2)(S-SnO_(2))quantum dots(QDs)(≈3 nm)encapsulated in an N,S codoped carbon fiber networks(S-SnO_(2)-CFN)are rationally fabricated using a sequential freeze-drying,calcination,and S-doping strategy.Experimental analysis and density functional theory calculations reveal that the integration of S-SnO_(2) QDs with N,S codoped carbon fiber network remarkably decreases the adsorption energies of Na/K atoms in the interlayer of SnO_(2)-CFN,and the S doping can increase the conductivity of SnO_(2),thereby enhancing the ion transfer kinetics.The synergistic interaction between S-SnO_(2) QDs and N,S codoped carbon fiber network results in a composite with fast Na+/K+storage and extraordinary long-term cyclability.Specifically,the S-SnO_(2)-CFN delivers high rate capacities of 141.0 mAh g^(−1) at 20 A g^(−1) in SIBs and 102.8 mAh g^(−1) at 10 A g^(−1) in PIBs.Impressively,it delivers ultra-stable sodium storage up to 10,000 cycles at 5 A g^(−1) and potassium storage up to 5000 cycles at 2 A g^(−1).This study provides insights into constructing metal oxide-based carbon fiber network structures for high-performance electrochemical energy storage and conversion devices.展开更多
Molybdenum carbide(Mo_(2)C)is a promising non-noble metal electrocatalyst with electronic structures similar to Pt for hydrogen evolution reaction(HER).However,strong H^(*)adsorption at the Mo sites hinders the improv...Molybdenum carbide(Mo_(2)C)is a promising non-noble metal electrocatalyst with electronic structures similar to Pt for hydrogen evolution reaction(HER).However,strong H^(*)adsorption at the Mo sites hinders the improvement of HER performance.Here,we synthesized monodisperse hollow Mo_(2)C nanoreactors,in which the carbon dots(CD)were in situ formed onto the surface of Mo_(2)C through carburization reactions.According to finite element simulation and analysis,the CD@Mo_(2)C possesses better mesoscale diffusion properties than Mo_(2)C alone.The optimized CD@Mo_(2)C nanoreactor demonstrates superior HER performance in alkaline electrolyte with a low overpotential of 57 mV at 10 mA cm^(−2),which is better than most Mo_(2)C-based electrocatalysts.Moreover,CD@Mo_(2)C exhibits excellent electrochemical stability during 240 h,confirmed by operando Raman and X-ray diffraction(XRD).Density functional theory(DFT)calculations show that carbon dots cause the d-band center of CD@Mo_(2)C to shift away from Fermi level,promoting water dissociation and the desorption of H^(*).This study provides a reasonable strategy towards high-activity Mo-based HER eletrocatalysts by modulating the strength of Mo–H bonds.展开更多
The mercury species in the ocean(MeHg,Hg^(2+))will be enriched in marine organisms and threaten human health through the food chain.While the excessive H_(2)O_(2)in the metabolic process will produce hydroxyl radicals...The mercury species in the ocean(MeHg,Hg^(2+))will be enriched in marine organisms and threaten human health through the food chain.While the excessive H_(2)O_(2)in the metabolic process will produce hydroxyl radicals and accelerate the aging of human cells,causing a series of diseases.Hence,the cost-effective and rapid detection of mercury and H_(2)O_(2)is of urgent requirement and significance.Here,we synthesized emerging graphitic carbon nitride quantum dots(g-CNQDs)with high fluorescence quantum yield(FLQY)of 42.69%via a bottom-up strategy by a facile one-step hydrothermal method.The g-CNQDs can detect the H_(2)O_(2)and Hg^(2+)through the fluorescence quenching effect between g-CNQDs and detected substances.With the presence of KI,g-CNQDs show concentration-dependent fluorescence toward H_(2)O_(2),with a wide detection range of 1–1000μmolL^(-1)and a low detection limit of 0.23μmolL^(-1).The g-CNQDs also show sensitivity toward Hg^(2+)with a detection range of 0–0.1μmolL^(-1)and a detection limit of 0.038μmolL^(-1).This dual-function detection of g-CNQDs has better practical application capability compared to other quantum dot detection.This study may provide a new strategy for g-CNQDs preparation and construct a fluorescence probe that can be used in various systems involving H_(2)O_(2)and Hg^(2+),providing better support for future bifunctional or multifunction studies.展开更多
Interfacial imperfections between the perovskite layer and the electron transport layer(ETL)in perovskite solar cells(PSCs)can lead to performance loss and negatively influence long-term operational stability.Here,we ...Interfacial imperfections between the perovskite layer and the electron transport layer(ETL)in perovskite solar cells(PSCs)can lead to performance loss and negatively influence long-term operational stability.Here,we introduce an interface engineering method to modify the interface between perovskite and ETL by using multifunctional carbon dots(CDs).C=O in the CDs can chelate with the uncoordinated Pb2+in the perovskite material,inhibit interfacial recombination,and enhance the performance and stability of device.In addition,–OH in CDs forms hydrogen bonds with I-and organic cation in perovskite,inhibiting light-induced I2release and organic cation volatilization,causing irreversible degradation of perovskite films,thereby enhancing the long-term operational stability of PSCs.Consequently,we achieve the champion inverted device with an efficiency of 24.02%.The CDs-treated PSCs exhibit high operational stability,and the maximum power point tracking only attenuates by 12.5%after 1000 h.Interfacial modification engineering supported by multifunctional quantum dots can accelerate the road to stable PSCs.展开更多
2D MXene(Ti_(3)CNT_(x))has been considered as the most promising electrode material for flexible supercapacitors owing to its metallic conductivity,ultra-high capacitance,and excellent flexibility.However,it suffers f...2D MXene(Ti_(3)CNT_(x))has been considered as the most promising electrode material for flexible supercapacitors owing to its metallic conductivity,ultra-high capacitance,and excellent flexibility.However,it suffers from a severe restacking problem during the electrode fabrication process,limiting the ion transport kinetics and the accessibility of ions in the electrodes,especially in the direction normal to the electrode surface.Herein,we report a NH_(3)-induced in situ etching strategy to fabricate 3D-interconnected porous MXene/carbon dots(p-MC)films for high-performance flexible supercapacitor.The pre-intercalated carbon dots(CDs)first prevent the restacking of MXene to expose more inner electrochemical active sites.The partially decomposed CDs generate NH_(3)for in situ etching of MXene nanosheets toward 3D-interconnected p-MC films.Benefiting from the structural merits and the 3D-interconnected ionic transmission channels,p-MC film electrodes achieve excellent gravimetric capacitance(688.9 F g^(-1)at 2 A g^(-1))and superior rate capability.Moreover,the optimized p-MC electrode is assembled into an asymmetric solid-state flexible supercapacitor with high energy density and superior cycling stability,demonstrating the great promise of p-MC electrode for practical applications.展开更多
Metal corrosion causes significant economic losses,safety issues,and environmental pollution.Hence,its prevention is of immense research interest.Carbon dots(CDs)are a new class of zero-dimensional carbon nanomaterial...Metal corrosion causes significant economic losses,safety issues,and environmental pollution.Hence,its prevention is of immense research interest.Carbon dots(CDs)are a new class of zero-dimensional carbon nanomaterials,which have been considered for corrosion protection applications in recent years due to their corrosion inhibition effect,fluorescence,low toxicity,facile chemical modification,and cost-effectiveness.This study provides a comprehensive overview of the synthesis,physical and chemical properties,and anticorrosion mechanisms of functionalized CDs.First,the corrosion inhibition performance of different types of CDs is introduced,followed by discussion on their application in the development of smart protective coatings with self-healing and/or self-reporting properties.The effective barrier formed by CDs in the coatings can inhibit the spread of local damage and achieve self-healing behavior.In addition,diverse functional groups on CDs can interact with Fe^(3+)and H^(+)ions generated during the corrosion process;this interaction changes their fluorescence,thereby demonstrating self-reporting behavior.Moreover,challenges and prospects for the development of CD-based corrosion protection systems are also presented.展开更多
Zero-dimensional environmentally friendly carbon quantum dots(CQDs)combined with two-di-mensional materials have a wide range of applications in optoelec-tronic devices.We combined steady-state and transient absorp-ti...Zero-dimensional environmentally friendly carbon quantum dots(CQDs)combined with two-di-mensional materials have a wide range of applications in optoelec-tronic devices.We combined steady-state and transient absorp-tion spectroscopies to study the energy transfer dynamics between CQDs and molybdenum disulfide(MoS_(2)).Transient absorption plots showed photoinduced absorption and stimulated emission features,which involved the intrinsic and defect states of CQDs.Adding MoS_(2)to CQDs solution,the lowest unoccupied molecular orbital of CQDs transferred energy to MoS_(2),which quenched the intrinsic emission at 390 nm.With addition of MoS_(2),CQD-MoS_(2)composites quenched defect emission at 490 nm and upward absorption,which originated from another energy transfer from the defect state.Two energy transfer paths between CQDs and MoS_(2)were efficiently manipulated by changing the concentration of MoS_(2),which laid a foundation for improving device performance.展开更多
Natural resources are practically infinitely abundant in nature,which stimulates scientists to create new materials with inventive uses and minimal environmental impact.Due to the various benefits of natural carbon do...Natural resources are practically infinitely abundant in nature,which stimulates scientists to create new materials with inventive uses and minimal environmental impact.Due to the various benefits of natural carbon dots(NCDs)from them has received a lot of attention recently.Natural products-derived carbon dots have recently emerged as a highly promising class of nanomaterials,showcasing exceptional properties and eco-friendly nature,which make them appealing for diverse applications in various fields such as biomedical,environmental sensing and monitoring,energy storage and conversion,optoelectronics and photonics,agriculture,quantum computing,nanomedicine and cancer therapy.Characterization techniques such as Photoinduced electron transfer,Aggregation-Induced-Emission(AIE),Absorbance,Fluorescence in UV-Vis and NIR Regions play crucial roles in understanding the structural and optical properties of Carbon dots(CDs).The exceptional photoluminescence properties exhibited by CDs derived from natural products have paved the way for applications in tissue engineering,cancer treatment,bioimaging,sensing,drug delivery,photocatalysis,and promising remarkable advancements in these fields.In this review,we summarized the various synthesis methods,physical and optical properties,applications,challenges,future prospects of natural products-derived carbon dots etc.In this expanding sector,the difficulties and prospects for NCD-based materials research will also be explored.展开更多
Because of the low reactivity of cyclic nitrides,liquid-phase synthesis of carbon nitride introduces challenges despite its favorable potential for energy-efficient preparation and superior applications.In this study,...Because of the low reactivity of cyclic nitrides,liquid-phase synthesis of carbon nitride introduces challenges despite its favorable potential for energy-efficient preparation and superior applications.In this study,we demonstrate a strong interaction between citric acid and melamine through experimental observation and theoretical simulation,which eff ectively activates melamine-condensation activity and produces carbon-rich carbon nitride nanosheets(CCN NSs)during hydrothermal reaction.Under a large specific surface area and increased light absorption,these CCN NSs demonstrate significantly enhanced photocatalytic activity in CO_(2) reduction,increasing the CO production rate by approximately tenfold compared with hexagonal melamine(h-Me).Moreover,the product selectivity of CCN NSs reaches up to 93.5%to generate CO from CO_(2).Furthermore,the annealed CCN NSs exhibit a CO conversion rate of up to 95.30μmol/(g h),which indicates an 18-fold increase compared with traditional carbon nitride.During the CCN NS synthesis,nitrogen-doped carbon quantum dots(NDC QDs)are simultaneously produced and remain suspended in the supernatant after centrifugation.These QDs disperse well in water and exhibit excellent luminescent properties(QY=67.2%),allowing their application in the design of selective and sensitive sensors to detect pollutants such as pesticide 2,4-dichlorophenol with a detection limit of as low as 0.04μmol/L.Notably,the simultaneous synthesis of CCN NSs and NDC QDs provides a cost-eff ective and highly efficient process,yielding products with superior capabilities for catalytic conversion of CO_(2) and pollutant detection,respectively.展开更多
Intrinsic topological defect engineering has been proven as a promising strategy to elevate the electrocatalytic activity of carbon materials.However,the controllable construction of high-density and specific topologi...Intrinsic topological defect engineering has been proven as a promising strategy to elevate the electrocatalytic activity of carbon materials.However,the controllable construction of high-density and specific topological defects in carbon frameworks to reveal the relationship between reactivity and defect structure remains a challenging task.Herein,the intrinsic pentagon carbon sites that can favor electron overflow and enhance their binding affinity towards the intermediates of catalytic reaction are firstly presented by the work function and the p-band center calculations.To experimentally verify this,the cage-opening reaction of fullerene is proposed and utilized for synthesizing carbon quantum dots with specific pentagon configuration(CQDs-P),subsequently utilizing CQDs-P to modulate the micro-scale defect density of three-dimensional reduced graphene oxide(rGO)viaπ-πinteractions.The multiple spatial-scale rGO-conjugated CQDs-P structure simultaneously possesses abundant pentagon and edge defects as catalytic active sites and long-range-orderedπelectron delocalization system as conductive network.The defects-rich CQDs-P/rGO-4 all-carbon-based catalyst exhibits superb catalytic activity for triiodide reduction reaction with a high photoelectric conversion efficiency of 8.40%,superior to the Pt reference(7.97%).Theoretical calculations suggest that pentagon defects in the carbon frameworks can promote charge transfer and modulate the adsorption/dissociation behavior of the reaction intermediates,thus enhancing the electrocatalytic activity of the catalyst.This work confirms the role of intrinsic pentagon defects in catalytic reactions and provides a new insight into the synthesis of defects-rich carbon catalysts.展开更多
Carbon dots(CDs), as a new member of carbon nanomaterial family, have aroused great interest since their discovery in 2004. Because of their outstanding water solubility, high sensitivity and selectivity to target ana...Carbon dots(CDs), as a new member of carbon nanomaterial family, have aroused great interest since their discovery in 2004. Because of their outstanding water solubility, high sensitivity and selectivity to target analytes, low toxicity, favorable biocompatibility, and excellent photostability, researchers from diverse disciplines have come together to further develop the fundamental properties of CDs. Many methods for the production of CDs have been reported, therein, hydrothermal and solvothermal technology needs simple equipments, and microwave synthesis needs less reaction time, hence these methods become current common synthesis methods, in which many precursors have been applied to produce CDs. Due to their excellent fluorescence, CDs have made impressive strides in sensitivity and selectivity to a diverse array of salt ions,organic/biological molecules and target gases. The development of CDs as nanoprobes is still in its infancy, but continued progress may lead to their integration into environmental and biological applications. Hydrothermal,solvothermal, and microwave synthesis of fluorescent carbon dots and their detection applications as nanoprobes in salt ions, organic/biological molecules, and target gases will be reviewed.展开更多
Over the past decade, carbon dots have ignited a burst of interest in many different fields, including nanomedicine, solar energy, optoelectronics, energy storage,and sensing applications, owing to their excellent pho...Over the past decade, carbon dots have ignited a burst of interest in many different fields, including nanomedicine, solar energy, optoelectronics, energy storage,and sensing applications, owing to their excellent photoluminescence properties and the easiness to modify their optical properties through doping and functionalization. In this review, the synthesis, structural and optical properties,as well as photoluminescence mechanisms of carbon dots are first reviewed and summarized. Then, we describe a series of designs for carbon dot-based sensors and the different sensing mechanisms associated with them.Thereafter, we elaborate on recent research advances on carbon dot-based sensors for the selective and sensitive detection of a wide range of analytes, including heavy metals, cations, anions, biomolecules, biomarkers,nitroaromatic explosives, pollutants, vitamins, and drugs.Lastly, we provide a concluding perspective on the overall status, challenges, and future directions for the use of carbon dots in real-life sensing.展开更多
In this work, lemon and onion biomasses commonly found in street markets are for the first time used to develop a facile, fast and low-cost one-step microwave-assisted carbonization method for synthesis of highly fluo...In this work, lemon and onion biomasses commonly found in street markets are for the first time used to develop a facile, fast and low-cost one-step microwave-assisted carbonization method for synthesis of highly fluorescent carbon dots (CDs). The structure and optical properties of CDs were investigated by TEM, XRD, XRF, UV-Vis, FTIR, and fluorescence spectroscopy. CDs displayed satisfactory optical pro-prieties, a high quantum yield of 23.6%, and excellent water solubility, and the particle size was 4.23-8.22 nm with an average diameter of 6.15 nm. An efficient fluorescent resonance energy transfer (FRET) between the CDs and riboflavin was achieved with CDs acting as donor and riboflavin as acceptor. A linear relationship between FRET and the riboflavin concentration from 0.10 to 3.0 μg/mL was observed, allowing the development of an accurate and fast analytical method to determine this vitamin in multivitamin/mineral supplements. Despite the potential interferences in these supplements, CDs were selective for riboflavin under optimized conditions. A paired t-test at a 95% confidence level indicated no statistically significant difference between the proposed and the reference methods. Recovery test presented values ranged from 96.0% to 101.4%. The limit of detection and relative standard deviation were estimated at 1.0 ng/mL and <2.6% (n = 3), respectively. CDs were successfully synthesized in a domestic microwave oven (1450 W, 6 min), presenting satisfactory parameters when compared with results of other studies reported in the literature, suggesting that the proposed method is a potentially useful method for the synthesis of CDs and determination of riboflavin.展开更多
Heteroatom-doped carbon dots(CDs) have attracted extensive interest because of their improved electronic and fluorescence properties with heteroatom doping. In this study, a new synthetic method for nitrogen(N) and su...Heteroatom-doped carbon dots(CDs) have attracted extensive interest because of their improved electronic and fluorescence properties with heteroatom doping. In this study, a new synthetic method for nitrogen(N) and sulfur(S)-doped CDs was developed via a hydrothermal method using methionine and citric acid as raw materials. The as-prepared CDs exhibit excellent optical properties and good biocompatibility. The spherical N,S-doped CDs have an average diameter of 5 nm. They consist of C, O, N and S, and take on excellent water solubility due to the hydroxyl and carboxyl, amino groups on the surface.The CDs have a photoluminescence quantum yield of 13.8% using quinine sulfate as a reference; the average fluorescence lifetime of the CDs was 3.67 ns. The CDs solution present good photoluminescence properties, and the maximum excitation wavelength and emission wavelength locate at 330 nm and405 nm, respectively. In addition, their fluorescence intensity almost does not change under the conditions of acid, alkali, and high salt, which indicated their anti-photobleaching property and good light stability. Based on the good biocompatibility and strong fluorescence emission of the CDs, they can be used as fluorescent imaging reagents.展开更多
Multifunctional nanocarrier-based theranostics is supposed to overcome some key problems in cancer treatment.In this work,a novel method for the preparation of a fluorescent mesoporous silica–carbon dot nanohybrid wa...Multifunctional nanocarrier-based theranostics is supposed to overcome some key problems in cancer treatment.In this work,a novel method for the preparation of a fluorescent mesoporous silica–carbon dot nanohybrid was developed.Carbon dots(CDs),from folic acid as the raw material,were prepared in situ and anchored on the surface of amino-modified mesoporous silica nanoparticles(MSNs–NH2) via a microwave-assisted solvothermal reaction.The as-prepared nanohybrid(designated MSNs–CDs) not only exhibited strong and stable yellow emission but also preserved the unique features of MSNs(e.g.,mesoporous structure,large specific surface area,and good biocompatibility),demonstrating a potential capability for fluorescence imagingguided drug delivery.More interestingly,the MSNs–CDs nanohybrid was able to selectively target folate receptor-overexpressing cancer cells(e.g.,HeLa),indicating that folic acid still retained its function even after undergoing the solvothermal reaction.Benefited by these excellent properties,the fluorescent MSNs–CDs nanohybrid can be employed as a fluorescence-guided nanocarrier for the targeted deliveryof anticancer drugs(e.g.,doxorubicin),thereby enhancing chemotherapeutic efficacy and reducing side effects.Our studies may provide a facile strategy for the fabrication of multifunctional MSN-based theranostic platforms,which is beneficial in the diagnosis and therapy of cancers in future.展开更多
基金the funding support from the National Natural Science Foundation of China(21906072,22006057)the Natural Science Foundation of Jiangsu Province(BK20190982)“Doctor of Mass entrepreneurship and innovation”Project in Jiangsu Province。
文摘The synergistic reaction of photocatalysis and advanced oxidation is a valid strategy for the degradation of harmful antibiotic wastewater.Herein,carbon dots(CDs)modified MIL-101(Fe)octahedrons to form CDs/MIL-101(Fe)composite photocatalyst was synthesized for visible light-driven photocatalytic/persulfate(PS)-activated tetracycline(TC)degradation.The electron spin resonance(ESR)spectra,scavenging experiment and electrochemical analysis were carried out to reveal that the high visible light-driven photocatalytic degradation activity of TC over CDs/MIL-101(Fe)photocatalysts is not only ascribed to the production of free active radicals in the CDs/MIL-101(Fe)/PS system(·OH,·SO_(4-),^(1)O_(2),h^(+)and·O_(2)^(-))but also attributed to the consumption of electrons caused by the PS,which can suppress the recombination of photo-generated carriers as well as strong light scattering and electron trapping effects of CDs.Finally,the possible degradation pathways were proposed by analyzing intermediates via liquid chromatography-mass spectrometry technique.This research presents a rational design conception to construct a CDs/PS-based photocatalysis/advanced oxidation technology with high-efficient degradation activity for the remediation of organic antibiotic pollutant wastewater and for the improvement of carrier transport kinetics of photocatalysts.
基金financially supported by the National Natural Science Foundation of China (42207032,52070064)the Key Project of National Natural Science Foundation of China (42330705)+2 种基金Key R&D Project of Hebei Province (21373601D)Advanced Talents Incubation Program of the Hebei University (521100222012)economic support from Collaborative Innovation Center for Baiyangdian Basin Ecological Protection and Beijing-Tianjin-Hebei Sustainable Development and Institute of Life Sciences and Green Development of Hebei University。
文摘Soil salinity seriously affects the utilization of farmland and threatens the crop production.Here,a selenium-nitrogen-co-doped carbon dots was developed,which increased rice seedling growth and alleviated its inhibition by salt stress by foliar spraying.The treatment activated Ca^(2+)and jasmonic acid signaling pathways and increased iron homeostasis,antioxidant defense,and cell wall development of rice seedlings.It could be used to increase crop resistance to environmental stress.
基金financially suppor ted by Key Research and Development Project of Anhui Province(No.2023h11020002)Natural Science Research Project for Universities in Anhui Province(No.KJ2021ZD0006)+3 种基金Natural Science Foundation of Anhui Province(No.2208085MB21)Fundamental Research Funds for the Central Universities of China(No.PA2022GDSK0056)Anhui Laboratory of Molecule-Based Materials(No.fzj22009)National Natural Science Foundation of China(Nos.21725102,22205108)。
文摘Over the past few decades,photocatalysis technology has received extensive attention because of its potential to mitigate or solve energy and environmental pollution problems.Designing novel materials with outstanding photocatalytic activities has become a research hotspot in this field.In this study,we prepared a series of photocatalysts in which BiOCl nanosheets were modified with carbon quantum dots(CQDs)to form CQDs/BiOCl composites by using a simple solvothermal method.The photocatalytic performance of the resulting CQDs/BiOCl composite photocatalysts was assessed by rhodamine B and tetracycline degradation under visible-light irradiation.Compared with bare BiOCl,the photocatalytic activity of the CQDs/BiOCl composites was significantly enhanced,and the 5 wt%CQDs/BiOCl composite exhibited the highest photocatalytic activity with a degradation efficiency of 94.5%after 30 min of irradiation.Moreover,photocatalytic N_(2)reduction performance was significantly improved after introducing CQDs.The 5 wt%CQDs/BiOCl composite displayed the highest photocatalytic N_(2)reduction performance to yield NH_3(346.25μmol/(g h)),which is significantly higher than those of 3 wt%CQDs/BiOCl(256.04μmol/(g h)),7 wt%CQDs/BiOCl(254.07μmol/(g h)),and bare BiOCl(240.19μmol/(g h)).Our systematic characterizations revealed that the key role of CQDs in improving photocatalytic performance is due to their increased light harvesting capacity,remarkable electron transfer ability,and higher photocatalytic activity sites.
文摘In this work,p⁃phenylenediamine and L⁃cysteine were used as raw materials,and water⁃soluble N,S co⁃doped carbon dots(N,S⁃CDs)with excellent performance were prepared through a one⁃step solvothermal method.The morphology and structure of N,S⁃CDs were characterized by transmission electron microscope,X⁃ray diffrac⁃tion,Fourier transform infrared spectroscopy,and X⁃ray photoelectron spectroscopy,and the basic photophysical properties were investigated via UV⁃Vis absorption spectra and fluorescence spectra.Meanwhile,the N,S⁃CDs have excellent luminescence stability with pH,ionic strength,radiation time,and storage time.Experimental results illus⁃trated the present sensor platform exhibited high sensitivity and selectivity in response to baicalein with a detection limit of 85 nmol·L-1.The quenching mechanism is proved to be the inner filter effect.In addition,this sensor can also detect baicalein in biofluids(serum and urine)with good accuracy and reproducibility.
基金The financial support from the National Natural Science Foundation of China(Grant No.51973201,U1804128,to X.P.Grant No.52173209,to Y.H.)+4 种基金the 111 Project(D18023,to X.P.)the National Science Foundation for Young Scientists of China(Grant No.22105179,to G.S.)the National Key R&D Program of China(2017YFB0307600,to M.L)China Postdoctoral Science Foundation(2020M682317,to X.Z)Scientific&technological research projects in Henan Province(222102520009,to X.Q.)
文摘Liquid metal(LM)and liquid metal alloys(LMs)possess unique physicochemical features,which have become emerging and functionalized materials that are attractive applicants in various fields.Herein,uniform LM nanodroplets armored by carbon dots(LMD@CDs)were prepared and exhibited high colloidal stability in various solvents,as well as water.After optimization,LMD@CDs can be applied as functional additives for the 3D/4D printing of hydrogel and cross-linked resin through digital light processing(DLP).The light absorption of LMD@CDs not only improved the printing accuracy,but also led to the cross-linking density differential during the post-curing process.Base on the cross-linking density differential of soft hydrogel and photothermal performance of the LM,the 3D printed objects can exhibit stimulus responses to both water and laser irradiation.Additionally,the CDs shell and LM core of LMD@CDs provide the printed objects interesting photoluminescence and electric conductivity capabilities,respectively.We deduce this versatile 3D/4D printing system would provide a new platform for the preparation of multi-functional and stimuli-responsive advance materials.
基金National Natural Science Foundation of China,Grant/Award Number:51971065Innovation Program of Shanghai Municipal Education Commission,Grant/Award Number:2019-01-07-00-07-E00028。
文摘SnO_(2) has been extensively investigated as an anode material for sodium-ion batteries(SIBs)and potassium-ion batteries(PIBs)due to its high Na/K storage capacity,high abundance,and low toxicity.However,the sluggish reaction kinetics,low electronic conductivity,and large volume changes during charge and discharge hinder the practical applications of SnO_(2)-based electrodes for SIBs and PIBs.Engineering rational structures with fast charge/ion transfer and robust stability is important to overcoming these challenges.Herein,S-doped SnO_(2)(S-SnO_(2))quantum dots(QDs)(≈3 nm)encapsulated in an N,S codoped carbon fiber networks(S-SnO_(2)-CFN)are rationally fabricated using a sequential freeze-drying,calcination,and S-doping strategy.Experimental analysis and density functional theory calculations reveal that the integration of S-SnO_(2) QDs with N,S codoped carbon fiber network remarkably decreases the adsorption energies of Na/K atoms in the interlayer of SnO_(2)-CFN,and the S doping can increase the conductivity of SnO_(2),thereby enhancing the ion transfer kinetics.The synergistic interaction between S-SnO_(2) QDs and N,S codoped carbon fiber network results in a composite with fast Na+/K+storage and extraordinary long-term cyclability.Specifically,the S-SnO_(2)-CFN delivers high rate capacities of 141.0 mAh g^(−1) at 20 A g^(−1) in SIBs and 102.8 mAh g^(−1) at 10 A g^(−1) in PIBs.Impressively,it delivers ultra-stable sodium storage up to 10,000 cycles at 5 A g^(−1) and potassium storage up to 5000 cycles at 2 A g^(−1).This study provides insights into constructing metal oxide-based carbon fiber network structures for high-performance electrochemical energy storage and conversion devices.
基金financially supported by the National Natural Science Foundation of China (22372001)Starting Fund for Scientific Research of High-Level Talents, Anhui Agricultural University (rc382108)+1 种基金Anhui Provincial Key Research and Development Plan (2022e07020037)Innovation and Entrepreneurship Training Program for College Students (X202310364204, S202210364046, X202310364209)
文摘Molybdenum carbide(Mo_(2)C)is a promising non-noble metal electrocatalyst with electronic structures similar to Pt for hydrogen evolution reaction(HER).However,strong H^(*)adsorption at the Mo sites hinders the improvement of HER performance.Here,we synthesized monodisperse hollow Mo_(2)C nanoreactors,in which the carbon dots(CD)were in situ formed onto the surface of Mo_(2)C through carburization reactions.According to finite element simulation and analysis,the CD@Mo_(2)C possesses better mesoscale diffusion properties than Mo_(2)C alone.The optimized CD@Mo_(2)C nanoreactor demonstrates superior HER performance in alkaline electrolyte with a low overpotential of 57 mV at 10 mA cm^(−2),which is better than most Mo_(2)C-based electrocatalysts.Moreover,CD@Mo_(2)C exhibits excellent electrochemical stability during 240 h,confirmed by operando Raman and X-ray diffraction(XRD).Density functional theory(DFT)calculations show that carbon dots cause the d-band center of CD@Mo_(2)C to shift away from Fermi level,promoting water dissociation and the desorption of H^(*).This study provides a reasonable strategy towards high-activity Mo-based HER eletrocatalysts by modulating the strength of Mo–H bonds.
基金support from the Natural Science Foundation of Shandong Province(No.ZR2021 MB075)National Natural Science Foundation of China(No.51602297)the Opening Fund of State Key Laboratory of High-Efficiency Utilization of Coal and Green Chemical Engineering(No.2021-K53).
文摘The mercury species in the ocean(MeHg,Hg^(2+))will be enriched in marine organisms and threaten human health through the food chain.While the excessive H_(2)O_(2)in the metabolic process will produce hydroxyl radicals and accelerate the aging of human cells,causing a series of diseases.Hence,the cost-effective and rapid detection of mercury and H_(2)O_(2)is of urgent requirement and significance.Here,we synthesized emerging graphitic carbon nitride quantum dots(g-CNQDs)with high fluorescence quantum yield(FLQY)of 42.69%via a bottom-up strategy by a facile one-step hydrothermal method.The g-CNQDs can detect the H_(2)O_(2)and Hg^(2+)through the fluorescence quenching effect between g-CNQDs and detected substances.With the presence of KI,g-CNQDs show concentration-dependent fluorescence toward H_(2)O_(2),with a wide detection range of 1–1000μmolL^(-1)and a low detection limit of 0.23μmolL^(-1).The g-CNQDs also show sensitivity toward Hg^(2+)with a detection range of 0–0.1μmolL^(-1)and a detection limit of 0.038μmolL^(-1).This dual-function detection of g-CNQDs has better practical application capability compared to other quantum dot detection.This study may provide a new strategy for g-CNQDs preparation and construct a fluorescence probe that can be used in various systems involving H_(2)O_(2)and Hg^(2+),providing better support for future bifunctional or multifunction studies.
基金supported by the National Natural Science Foundation of China(52172237,22261142666)the Shaanxi International Cooperation Project(2020KWZ-018)+3 种基金the Shaanxi Science Fund for Distinguished Young Scholars(2022JC-21)the Research Fund of the State Key Laboratory of Solidification Processing(NPU),China(2021-QZ-02)the Fundamental Research Funds for the Central Universities(D5000220033)the Hong Kong Scholars Program(XJ2022025)。
文摘Interfacial imperfections between the perovskite layer and the electron transport layer(ETL)in perovskite solar cells(PSCs)can lead to performance loss and negatively influence long-term operational stability.Here,we introduce an interface engineering method to modify the interface between perovskite and ETL by using multifunctional carbon dots(CDs).C=O in the CDs can chelate with the uncoordinated Pb2+in the perovskite material,inhibit interfacial recombination,and enhance the performance and stability of device.In addition,–OH in CDs forms hydrogen bonds with I-and organic cation in perovskite,inhibiting light-induced I2release and organic cation volatilization,causing irreversible degradation of perovskite films,thereby enhancing the long-term operational stability of PSCs.Consequently,we achieve the champion inverted device with an efficiency of 24.02%.The CDs-treated PSCs exhibit high operational stability,and the maximum power point tracking only attenuates by 12.5%after 1000 h.Interfacial modification engineering supported by multifunctional quantum dots can accelerate the road to stable PSCs.
基金The authors gratefully acknowledge financial support from the National Natural Science Foundation of China(Grant Nos.21805261 and 51972277)Sichuan Science and Technology Program(Grant Nos.2021YFG0251 and 2022YFG0293)Fundamental Research Funds for the Central Universities(Grant No.2682021CX105)。
文摘2D MXene(Ti_(3)CNT_(x))has been considered as the most promising electrode material for flexible supercapacitors owing to its metallic conductivity,ultra-high capacitance,and excellent flexibility.However,it suffers from a severe restacking problem during the electrode fabrication process,limiting the ion transport kinetics and the accessibility of ions in the electrodes,especially in the direction normal to the electrode surface.Herein,we report a NH_(3)-induced in situ etching strategy to fabricate 3D-interconnected porous MXene/carbon dots(p-MC)films for high-performance flexible supercapacitor.The pre-intercalated carbon dots(CDs)first prevent the restacking of MXene to expose more inner electrochemical active sites.The partially decomposed CDs generate NH_(3)for in situ etching of MXene nanosheets toward 3D-interconnected p-MC films.Benefiting from the structural merits and the 3D-interconnected ionic transmission channels,p-MC film electrodes achieve excellent gravimetric capacitance(688.9 F g^(-1)at 2 A g^(-1))and superior rate capability.Moreover,the optimized p-MC electrode is assembled into an asymmetric solid-state flexible supercapacitor with high energy density and superior cycling stability,demonstrating the great promise of p-MC electrode for practical applications.
基金financially supported by the Young Elite Scientists Sponsorship Program by the China Association for Science and Technology(YESS,No.2020QNRC001)the National Science and Technology Resources Investigation Program of China(No.2021FY100603)the Fundamental Research Funds for the Central Universities(No.FRF-BD-20-28A2)。
文摘Metal corrosion causes significant economic losses,safety issues,and environmental pollution.Hence,its prevention is of immense research interest.Carbon dots(CDs)are a new class of zero-dimensional carbon nanomaterials,which have been considered for corrosion protection applications in recent years due to their corrosion inhibition effect,fluorescence,low toxicity,facile chemical modification,and cost-effectiveness.This study provides a comprehensive overview of the synthesis,physical and chemical properties,and anticorrosion mechanisms of functionalized CDs.First,the corrosion inhibition performance of different types of CDs is introduced,followed by discussion on their application in the development of smart protective coatings with self-healing and/or self-reporting properties.The effective barrier formed by CDs in the coatings can inhibit the spread of local damage and achieve self-healing behavior.In addition,diverse functional groups on CDs can interact with Fe^(3+)and H^(+)ions generated during the corrosion process;this interaction changes their fluorescence,thereby demonstrating self-reporting behavior.Moreover,challenges and prospects for the development of CD-based corrosion protection systems are also presented.
基金supported by the National Natural Science Foundation of China(No.61805134 and No.11974229)Applied Basic Research Program in Shanxi Province,China(No.201801D221016 and No.202103021223254)+2 种基金Scientific and Technological Innovation Pro-grams of Higher Education Institutions in Shanxi(No.2020L0235 and No.2021L257)Linfen Key Re-search and Development Program(No.2028)Graduate Innovation Project in Shanxi Province(No.2022Y498).
文摘Zero-dimensional environmentally friendly carbon quantum dots(CQDs)combined with two-di-mensional materials have a wide range of applications in optoelec-tronic devices.We combined steady-state and transient absorp-tion spectroscopies to study the energy transfer dynamics between CQDs and molybdenum disulfide(MoS_(2)).Transient absorption plots showed photoinduced absorption and stimulated emission features,which involved the intrinsic and defect states of CQDs.Adding MoS_(2)to CQDs solution,the lowest unoccupied molecular orbital of CQDs transferred energy to MoS_(2),which quenched the intrinsic emission at 390 nm.With addition of MoS_(2),CQD-MoS_(2)composites quenched defect emission at 490 nm and upward absorption,which originated from another energy transfer from the defect state.Two energy transfer paths between CQDs and MoS_(2)were efficiently manipulated by changing the concentration of MoS_(2),which laid a foundation for improving device performance.
文摘Natural resources are practically infinitely abundant in nature,which stimulates scientists to create new materials with inventive uses and minimal environmental impact.Due to the various benefits of natural carbon dots(NCDs)from them has received a lot of attention recently.Natural products-derived carbon dots have recently emerged as a highly promising class of nanomaterials,showcasing exceptional properties and eco-friendly nature,which make them appealing for diverse applications in various fields such as biomedical,environmental sensing and monitoring,energy storage and conversion,optoelectronics and photonics,agriculture,quantum computing,nanomedicine and cancer therapy.Characterization techniques such as Photoinduced electron transfer,Aggregation-Induced-Emission(AIE),Absorbance,Fluorescence in UV-Vis and NIR Regions play crucial roles in understanding the structural and optical properties of Carbon dots(CDs).The exceptional photoluminescence properties exhibited by CDs derived from natural products have paved the way for applications in tissue engineering,cancer treatment,bioimaging,sensing,drug delivery,photocatalysis,and promising remarkable advancements in these fields.In this review,we summarized the various synthesis methods,physical and optical properties,applications,challenges,future prospects of natural products-derived carbon dots etc.In this expanding sector,the difficulties and prospects for NCD-based materials research will also be explored.
基金supported by the National High Technology Research and Development Program of China(No.2021YFF1200200)the Peiyang Talents Project of Tianjin University。
文摘Because of the low reactivity of cyclic nitrides,liquid-phase synthesis of carbon nitride introduces challenges despite its favorable potential for energy-efficient preparation and superior applications.In this study,we demonstrate a strong interaction between citric acid and melamine through experimental observation and theoretical simulation,which eff ectively activates melamine-condensation activity and produces carbon-rich carbon nitride nanosheets(CCN NSs)during hydrothermal reaction.Under a large specific surface area and increased light absorption,these CCN NSs demonstrate significantly enhanced photocatalytic activity in CO_(2) reduction,increasing the CO production rate by approximately tenfold compared with hexagonal melamine(h-Me).Moreover,the product selectivity of CCN NSs reaches up to 93.5%to generate CO from CO_(2).Furthermore,the annealed CCN NSs exhibit a CO conversion rate of up to 95.30μmol/(g h),which indicates an 18-fold increase compared with traditional carbon nitride.During the CCN NS synthesis,nitrogen-doped carbon quantum dots(NDC QDs)are simultaneously produced and remain suspended in the supernatant after centrifugation.These QDs disperse well in water and exhibit excellent luminescent properties(QY=67.2%),allowing their application in the design of selective and sensitive sensors to detect pollutants such as pesticide 2,4-dichlorophenol with a detection limit of as low as 0.04μmol/L.Notably,the simultaneous synthesis of CCN NSs and NDC QDs provides a cost-eff ective and highly efficient process,yielding products with superior capabilities for catalytic conversion of CO_(2) and pollutant detection,respectively.
基金partly supported by the National Natural Science Foundation of China(22078052)the National Key R&D Program of China(2022YFB4101602)the Fundamental Research Funds for the Central Universities(DUT22LAB612)。
文摘Intrinsic topological defect engineering has been proven as a promising strategy to elevate the electrocatalytic activity of carbon materials.However,the controllable construction of high-density and specific topological defects in carbon frameworks to reveal the relationship between reactivity and defect structure remains a challenging task.Herein,the intrinsic pentagon carbon sites that can favor electron overflow and enhance their binding affinity towards the intermediates of catalytic reaction are firstly presented by the work function and the p-band center calculations.To experimentally verify this,the cage-opening reaction of fullerene is proposed and utilized for synthesizing carbon quantum dots with specific pentagon configuration(CQDs-P),subsequently utilizing CQDs-P to modulate the micro-scale defect density of three-dimensional reduced graphene oxide(rGO)viaπ-πinteractions.The multiple spatial-scale rGO-conjugated CQDs-P structure simultaneously possesses abundant pentagon and edge defects as catalytic active sites and long-range-orderedπelectron delocalization system as conductive network.The defects-rich CQDs-P/rGO-4 all-carbon-based catalyst exhibits superb catalytic activity for triiodide reduction reaction with a high photoelectric conversion efficiency of 8.40%,superior to the Pt reference(7.97%).Theoretical calculations suggest that pentagon defects in the carbon frameworks can promote charge transfer and modulate the adsorption/dissociation behavior of the reaction intermediates,thus enhancing the electrocatalytic activity of the catalyst.This work confirms the role of intrinsic pentagon defects in catalytic reactions and provides a new insight into the synthesis of defects-rich carbon catalysts.
基金supported by the National HighTech R&D Program of China (863 program, 2011AA050504)National Natural Science Foundation of China (21171117 and 61376003)+4 种基金Program for New Century Excellent Talents in University (NCET-12-0356)Shanghai Natural Science Foundation (13ZR1456600)Shanghai Science and Technology Grant (12JC1405700)Shanghai Pujiang Program (11PJD011)the Program for Professor of Special Appointment (Eastern Scholar) at Shanghai Institutions of Higher Learning, and Medical-Engineering Crossover Fund (YG2012MS40 and YG2012MS32) of Shanghai Jiao Tong University
文摘Carbon dots(CDs), as a new member of carbon nanomaterial family, have aroused great interest since their discovery in 2004. Because of their outstanding water solubility, high sensitivity and selectivity to target analytes, low toxicity, favorable biocompatibility, and excellent photostability, researchers from diverse disciplines have come together to further develop the fundamental properties of CDs. Many methods for the production of CDs have been reported, therein, hydrothermal and solvothermal technology needs simple equipments, and microwave synthesis needs less reaction time, hence these methods become current common synthesis methods, in which many precursors have been applied to produce CDs. Due to their excellent fluorescence, CDs have made impressive strides in sensitivity and selectivity to a diverse array of salt ions,organic/biological molecules and target gases. The development of CDs as nanoprobes is still in its infancy, but continued progress may lead to their integration into environmental and biological applications. Hydrothermal,solvothermal, and microwave synthesis of fluorescent carbon dots and their detection applications as nanoprobes in salt ions, organic/biological molecules, and target gases will be reviewed.
基金supported by NTUA*STAR Silicon Technologies Centre of Excellence under the program Grant (No.11235100003)Grants Tier 2 MOE2017-T2-2-002 (No.M402110000) from Ministry of Educationthe NRF-ANR Joint Call 2017 Research Grant (No. M419640000) from the National Research Foundation,Singapore
文摘Over the past decade, carbon dots have ignited a burst of interest in many different fields, including nanomedicine, solar energy, optoelectronics, energy storage,and sensing applications, owing to their excellent photoluminescence properties and the easiness to modify their optical properties through doping and functionalization. In this review, the synthesis, structural and optical properties,as well as photoluminescence mechanisms of carbon dots are first reviewed and summarized. Then, we describe a series of designs for carbon dot-based sensors and the different sensing mechanisms associated with them.Thereafter, we elaborate on recent research advances on carbon dot-based sensors for the selective and sensitive detection of a wide range of analytes, including heavy metals, cations, anions, biomolecules, biomarkers,nitroaromatic explosives, pollutants, vitamins, and drugs.Lastly, we provide a concluding perspective on the overall status, challenges, and future directions for the use of carbon dots in real-life sensing.
文摘In this work, lemon and onion biomasses commonly found in street markets are for the first time used to develop a facile, fast and low-cost one-step microwave-assisted carbonization method for synthesis of highly fluorescent carbon dots (CDs). The structure and optical properties of CDs were investigated by TEM, XRD, XRF, UV-Vis, FTIR, and fluorescence spectroscopy. CDs displayed satisfactory optical pro-prieties, a high quantum yield of 23.6%, and excellent water solubility, and the particle size was 4.23-8.22 nm with an average diameter of 6.15 nm. An efficient fluorescent resonance energy transfer (FRET) between the CDs and riboflavin was achieved with CDs acting as donor and riboflavin as acceptor. A linear relationship between FRET and the riboflavin concentration from 0.10 to 3.0 μg/mL was observed, allowing the development of an accurate and fast analytical method to determine this vitamin in multivitamin/mineral supplements. Despite the potential interferences in these supplements, CDs were selective for riboflavin under optimized conditions. A paired t-test at a 95% confidence level indicated no statistically significant difference between the proposed and the reference methods. Recovery test presented values ranged from 96.0% to 101.4%. The limit of detection and relative standard deviation were estimated at 1.0 ng/mL and <2.6% (n = 3), respectively. CDs were successfully synthesized in a domestic microwave oven (1450 W, 6 min), presenting satisfactory parameters when compared with results of other studies reported in the literature, suggesting that the proposed method is a potentially useful method for the synthesis of CDs and determination of riboflavin.
基金financially supported by the National Natural Science Foundation of China (NSFC, No. 21535006 and No. 21705132)the Fundamental Research Funds for the Central Universities (XDJK2017C065)
文摘Heteroatom-doped carbon dots(CDs) have attracted extensive interest because of their improved electronic and fluorescence properties with heteroatom doping. In this study, a new synthetic method for nitrogen(N) and sulfur(S)-doped CDs was developed via a hydrothermal method using methionine and citric acid as raw materials. The as-prepared CDs exhibit excellent optical properties and good biocompatibility. The spherical N,S-doped CDs have an average diameter of 5 nm. They consist of C, O, N and S, and take on excellent water solubility due to the hydroxyl and carboxyl, amino groups on the surface.The CDs have a photoluminescence quantum yield of 13.8% using quinine sulfate as a reference; the average fluorescence lifetime of the CDs was 3.67 ns. The CDs solution present good photoluminescence properties, and the maximum excitation wavelength and emission wavelength locate at 330 nm and405 nm, respectively. In addition, their fluorescence intensity almost does not change under the conditions of acid, alkali, and high salt, which indicated their anti-photobleaching property and good light stability. Based on the good biocompatibility and strong fluorescence emission of the CDs, they can be used as fluorescent imaging reagents.
基金the financial support from the National Natural Science Foundation of China(51872300 and U1832110)Ningbo Science and Technology Bureau(2016C50009)the W.C.Wong Education Foundation(rczx0800)
文摘Multifunctional nanocarrier-based theranostics is supposed to overcome some key problems in cancer treatment.In this work,a novel method for the preparation of a fluorescent mesoporous silica–carbon dot nanohybrid was developed.Carbon dots(CDs),from folic acid as the raw material,were prepared in situ and anchored on the surface of amino-modified mesoporous silica nanoparticles(MSNs–NH2) via a microwave-assisted solvothermal reaction.The as-prepared nanohybrid(designated MSNs–CDs) not only exhibited strong and stable yellow emission but also preserved the unique features of MSNs(e.g.,mesoporous structure,large specific surface area,and good biocompatibility),demonstrating a potential capability for fluorescence imagingguided drug delivery.More interestingly,the MSNs–CDs nanohybrid was able to selectively target folate receptor-overexpressing cancer cells(e.g.,HeLa),indicating that folic acid still retained its function even after undergoing the solvothermal reaction.Benefited by these excellent properties,the fluorescent MSNs–CDs nanohybrid can be employed as a fluorescence-guided nanocarrier for the targeted deliveryof anticancer drugs(e.g.,doxorubicin),thereby enhancing chemotherapeutic efficacy and reducing side effects.Our studies may provide a facile strategy for the fabrication of multifunctional MSN-based theranostic platforms,which is beneficial in the diagnosis and therapy of cancers in future.