Appropriate Supply of Ammonium Nitrogen and Ammonium Nitrate Reduces Cadmium Content in Rice Seedlings by Inhibiting Cadmium Uptake and Transport

Reasonable nitrogen(N) application is a promising strategy for reducing crop cadmium(Cd) toxicity. However, the specific form of N and the required amount that affect Cd tolerance and accumulation in rice remain unclear. This study explored the influence of different N-fertilizer forms(NH_(4)NO_(3), NH_4Cl, and KNO_(3)) and dosages on Cd tolerance and uptake in Cd-stressed N-sensitive and N-insensitive indica rice accessions. The results indicated that the Cd tolerance of N-sensitive indica accessions is more robust than that of N-insensitive ones. Furthermore, the shoot Cd content and Cd translocation rate in both N-sensitive and N-insensitive indica accessions decreased with an appropriate supply of NH_(4)NO_(3) and NH_4Cl, whereas they were comparable or slightly increased with increased KNO_(3). Unfortunately, we did not find significant and regular differences in Cd accumulation or translocation between N-sensitive and N-insensitive rice accessions. Consistent with the reduction of shoot Cd content, the addition of NH_(4)NO_(3) and NH_4Cl also inhibited the instantaneous root Cd^(2+) uptake. The expression changes of Cd transport-related genes under different N forms and dosages suggested that the decreased shoot Cd content, caused by the increased supply of NH_(4)NO_(3) and NH_4Cl, is likely achieved by reducing the transcription of OsNRAMP1 and OsIRT1. In summary, our findings reveal that an appropriate supply of NH_(4)NO_(3) and NH_4Cl could reduce Cd uptake and transport in rice seedlings, suggesting that rational N management could reduce the Cd risk in rice production.

Flame-retardant ammonium polyphosphate/MXene decorated carbon foam materials as polysulfide traps for fire-safe and stable lithium-sulfur batteries

Lithium-sulfur(Li-S)batteries are one of the most promising modern-day energy supply systems because of their high theoretical energy density and low cost.However,the development of high-energy density Li-S batteries with high loading of flammable sulfur faces the challenges of electrochemical performance degradation owing to the shuttle effect and safety issues related to fire or explosion accidents.In this work,we report a three-dimensional(3D)conductive nitrogen-doped carbon foam supported electrostatic self-assembled MXene-ammonium polyphosphate(NCF-MXene-APP)layer as a heat-resistant,thermally-insulated,flame-retardant,and freestanding host for Li-S batteries with a facile and costeffective synthesis method.Consequently,through the use of NCF-MXene-APP hosts that strongly anchor polysulfides,the Li-S batteries demonstrate outstanding electrochemical properties,including a high initial discharge capacity of 1191.6 mA h g^(-1),excellent rate capacity of 755.0 mA h g^(-1)at 1 C,and long-term cycling stability with an extremely low-capacity decay rate of 0.12%per cycle at 2 C.More importantly,these batteries can continue to operate reliably under high temperature or flame attack conditions.Thus,this study provides valuable insights into the design of safe high-performance Li-S batteries.

Influence of ammonium sulfate on the corrosion behavior of AZ31 magnesium alloy in chloride environment

Electrochemical corrosion of AZ31 magnesium alloy in the NH_(4)^(+)-SO_(4)2−-Cl−environment is studied.Effect of NH_(4)^(+)overshadows that of Cl−as the(NH_(4))_(2)SO_(4) concentration is 0.005 M or higher,yielding an evolution from localized corrosion to uniform corrosion.Acceleration effect of NH_(4)^(+)can be attributed to that(i)NH_(4)^(+)dissolves the inner MgO and hinders the precipitation of Mg(OH)_(2) and(ii)the buffering ability of NH_(4)^(+)provides H+,enhances the hydrogen evolution,and expedites the corrosion process.The latter is demonstrated as the dominant factor with the results in unbuffered and buffered environments.The severe corrosion and hydrogen process in NH_(4)^(+)-containing solution results in a high Hads coverage and yields an inductive loop within the low frequency.Meanwhile,SO_(4)^(2−)is helpful in generating cracked but partially protective corrosion products,while Cl−could broaden the corrosion area beneath the corrosion product.

Synchronous organic-inorganic co-intercalated ammonium vanadate cathode for advanced aqueous zinc-ion batteries

Vanadium-based cathode materials are attractive for aqueous zinc-ion batteries(AZIBs)owing to the high capacity from their open frameworks and multiple valences.However,the cycle stability and rate capability are still restricted by the low electrical conductivity and trapped diffusion kinetics.Here,we propose an organic-inorganic co-intercalation strategy to regulate the structure of ammonium vanadate(NH_(4)V_(4)O_(10),NVO).The introduction of Al^(3+)and polyaniline(PANI)induces the optimized layered structure and generation of urchin-like hierarchical construction(AP-NVO),based on heterogeneous nucleation and dissolution-recrystallization growth mechanism.Owing to these favorable features,the AP-NVO electrode delivers a desirable discharge capacity of 386 mA h g^(-1) at 1.0 A g^(-1),high-rate capability of 263 mA h g^(-1 )at 5.0 A g^(-1) and excellent cycling stability with 80.4%capacity retention over 2000 cycles at 5.0 A g^(-1).Such satisfactory electrochemical performance is believed to result from the enhanced reaction kinetics provided by the stable layered structure and a high intercalation pseudo-capacitance reaction.These results could provide enlightening insights into the design of layered vanadium oxide cathodematerials.

Ash removal from inferior coal via ammonium fluoride roasting and simultaneous yield of white carbon black

The quality upgrading and deashing of inferior coal by chemical method still faces great challenges.The dangers of strong acid,strong alkali,waste water and exhaust gas as well as high cost limit its industrial production.This paper systematically investigates the ash reduction and desilicification of two typical inferior coal utilizing ammonium fluoride roasting method.Under the optimal conditions,for fat coal and gas coal,the deashing rates are 69.02%and 54.13%,and the desilicification rates are 92.64%and 90.27%,respectively.The molar dosage of ammonium fluoride remains consistent for both coals;however,the gas coal,characterized by a lower ash and silica content(less than half that of the fat coal),achieves optimum deashing effect at a reduced time and temperature.The majority of silicon in coal transforms into gaseous ammonium fluorosilicate,subsequently preparing nanoscale amorphous silica with a purity of 99.90%through ammonia precipitation.Most of the fluorine in deashed coal are assigned in inorganic minerals,suggesting the possibility of further fluorine and ash removal via flotation.This research provides a green and facile route to deash inferior coal and produce nano-scale white carbon black simultaneously.

A review on surface coating strategies for anti-hygroscopic of high energy oxidizer ammonium dinitramide

Ammonium dinitramide(ADN),which has the advantages of high energy density,no halogen and low characteristic signal,is not only considered as a new high-energy oxidizer that is expected to replace the traditional oxidizer ammonium perchlorate(AP)in solid propellants,but also a good performance explosive in itself.However,due to the strong hygroscopicity of ADN,its application in solid propellants and explosives is greatly limited.Solving the hygroscopicity of ADN is the key to realize the wide application of ADN.In this paper,we systematically review the research progress of anti-hygroscopic strategies of ADN coating.The surface coating methods are focusing on solvent volatilization,solvent-non-solvent,melt crystallization and atomic layer deposition technology.The characteristics of the different methods are compared and analyzed,and the basis for the classification and selection of the coating materials are introduced in detail.In addition,the feasibility of material for surface coating of ADN is evaluated by several compatibility analysis methods.It is highly expected that the liquid phase method(solvent volatilization method,solvent-non-solvent method)would be the promising method for future ADN coating because of its effective,safety and facile operation.Furthermore,polymer materials,are the preferred coating materials due to their high viscosity,easy adhesion,good anti-hygroscopic effect,and heat resistance,which make ADN weak hygroscopicity,less sensitive,easier to preserve and good compatibility.

Simple preparation of C(CS)/g-C_(3)N_(4)/Co carbon aerogel and its catalytic performance for ammonium perchlorate

Biomass chitosan(CS)was used as a template,graphitic phase carbon nitride(g-C_(3)N_(4))with high nitrogen content and certain catalytic activity was used as a dopant,and nano-transition metal cobalt(Co)was used as a catalytic center point.The carbon aerogel(C(CS)/g-C_(3)N_(4)/Co)with a three-dimensional network-like structure was prepared by assembling the three materials through experimental operations such as freeze-drying and high-temperature carbonization.It was demonstrated by scanning and transmission characterization that the CS in the carbon aerogel could provide more active sites for the cobalt nanoparticles,and the doping of graphite-phase carbon nitride as a template dispersed the cobalt nanoparticles and changed the conductivity of the CS.To investigate the catalytic effect of carbon aerogel on ammonium perchlorate(AP),it was investigated by differential thermal analyzer and TG thermal analysis.This carbon aerogel was very effective in catalyzing AP,and the 10 wt% content of the catalyst reduced the AP pyrolysis peak from 703.9 to 595.5 K.And to further investigate the synergistic effect of the three materials,further carbon aerogels such as C(CS)/Co,g-C_(3)N_(4)/Co were prepared and applied to catalyze AP,and the same ratio reduced the AP pyrolysis peak by 98.1℃ and 97.7℃.This result indicates a synergistic effect of the assembly of the three materials.

Structure and electrical properties of polysilicon films doped with ammonium tetraborate tetrahydrate

Here,p-type polysilicon films are fabricated by ex-situ doping method with ammonium tetraborate tetrahydrate(ATT)as the boron source,named ATT-pPoly.The effects of ATT on the properties of polysilicon films are comprehensively analyzed.The Raman spectra reveal that the ATT-pPoly film is composed of grain boundary and crystalline regions.The preferred orientation is the(111)direction.The grain size increases from 16−23 nm to 21−47 nm,by~70%on average.Comparing with other reported films,Hall measurements reveal that the ATT-pPoly film has a higher carrier concentration(>10^(20)cm^(−3))and higher carrier mobility(>30 cm2/(V·s)).The superior properties of the ATT-pPoly film are attributed to the heavy doping and improved grain size.Heavy doping property is proved by the mean sheet resistance(Rsheet,m)and distribution profile.The R_(sheet,m)decreases by more than 30%,and it can be further decreased by 90%if the annealing temperature or duration is increased.The boron concentration of ATT-pPoly film annealed at 950℃ for 45 min is~3×10^(20)cm^(−3),and the distribution is nearly the same,except near the surface.Besides,the standard deviation coefficient(σ)of Rsheet,m is less than 5.0%,which verifies the excellent uniformity of ATT-pPoly film.

Biobased Furfurylated Poplar Wood for Flame-Retardant Modification with Boric Acid and Ammonium Dihydrogen Phosphate

Furfurylated wood exhibits excellent dimensional stability and corrosion resistance,making it a promising material for constructing buildings,but it is highly flammable.Herein,flame-retardant furfurylated poplar wood was produced via a two-step process utilizing boric acid(BA)and ammonium dihydrogen phosphate(ADP)as flame-retardant components,and biomass-derived furfuryl alcohol(FA)as a modifier.The acidity of BA and ADP allowed them to catalyze the polymerization of FA,which formed a cross-linked network that immobilized BA and ADP inside the wood.The addition of BA/ADP substantially delayed the time to ignition from 10 to 385 s and reduced the total heat release and total smoke release by 58.75%and 77.31%,respectively.Analysis of the pyrolysis process showed that the decomposition products of BA and ADP protected the underlying furfurylated wood and diluted combustible gases.This method significantly improved the fire retardancy and smokeless properties of furfurylated wood,providing promising prospects for its application as an engineering material.

Micro-aluminum powder with bi-or tri-component alloy coating as a promising catalyst:Boosting pyrolysis and combustion of ammonium perchlorate

A novel design of micro-aluminum(μAl)powder coated with bi-/tri-component alloy layer,such as:Ni-P and Ni-P-Cu(namely,Al@Ni-P,Al@Ni-P-Cu,respectively),as combustion catalysts,were introduced to release its huge energy inside Al-core and promote rapid pyrolysis of ammonium perchlorate(AP)at a lower temperature in aluminized propellants.The microstructure of Al@Ni-P-Cu demonstrates that a three-layer Ni-P-Cu shell,with the thickness of~100 nm,is uniformly supported byμAl carrier(fuel unit),which has an amorphous surface with a thickness of~2.3 nm(catalytic unit).The peak temperature of AP with the addition of Al@Ni-P-Cu(3.5%)could significantly drop to 316.2℃ at high-temperature thermal decomposition,reduced by 124.3℃,in comparison to that of pure AP with 440.5℃.It illustrated that the introduction of Al@Ni-P-Cu could weaken or even eliminate the obstacle of AP pyrolysis due to its reduction of activation energy with 118.28 kJ/mol.The laser ignition results showed that the ignition delay time of Al@Ni-P-Cu/AP mixture with 78 ms in air is shorter than that of Al@Ni-P/AP(118 ms),decreased by 33.90%.Those astonishing breakthroughs were attributed to the synergistic effects of adequate active sites on amorphous surface and oxidation exothermic reactions(7597.7 J/g)of Al@Ni-P-Cu,resulting in accelerated mass and/or heat transfer rate to catalyze AP pyrolysis and combustion.Moreover,it is believed to provide an alternative Al-based combustion catalyst for propellant designer,to promote the development the propellants toward a higher energy.

Humic Acid Effects on Reducing Corn Leaf Burn Caused by Foliar Spray of Urea-Ammonium Nitrate at Different Humic Acid/Urea-Ammonium Nitrate Ratios

Technologies for reducing corn leaf burn caused by foliar spray of urea-ammonium nitrate (UAN) during the early growing season are limited. A field experiment was carried out to evaluate the effects of humic acid on corn leaf burn caused by foliar spray of undiluted UAN solution on corn canopy at Jackson, TN in 2018. Thirteen treatments of the mixtures of UAN and humic acid were evaluated at V6 of corn with different UAN application rates and different UAN/humic acid ratios. Leaf burn during 1 2, 3, 4, 5, 6, 7, and 14 days after UAN foliar spray significantly differed between with or without humic acid addition. The addition of humic acid to UAN significantly reduced leaf burn at each UAN application rate (15, 25, and 35 gal/acre). The reduction of leaf burn was enhanced as the humic acid/UAN ratio went up from 10% to 30%. Leaf burn due to foliar application of UAN became severer with higher UAN rates. The linear regression of leaf burn 14 days after application with humic acid/UAN ratio was highly significant and negative. However, the linear regression of leaf burn 14 days after application with the UAN application rate was highly significant and positive. In conclusion, adding humic acid to foliar-applied UAN is beneficial for reducing corn leaf burn during the early growing season.

Activation mechanism of ammonium oxalate with pyrite in the lime system and its response to flotation separation of pyrite from arsenopyrite

The activation properties of ammonium oxalate on the flotation of pyrite and arsenopyrite in the lime system were studied in this work.Single mineral flotation tests showed that the ammonium oxalate strongly activated pyrite in high alkalinity and high Ca^(2+)system,whereas arsenopyrite was almost unaffected.In mineral mixtures tests,the recovery difference between pyrite and arsenopyrite after adding ammonium oxalate is more than 85%.After ammonium oxalate and ethyl xanthate treatment,the hydrophobicity of pyrite increased significantly,and the contact angle increased from 66.62°to 75.15°and then to 81.21°.After ammonium oxalate treatment,the amount of ethyl xanthate adsorption on the pyrite surface significantly increased and was much greater than that on the arsenopyrite surface.Zeta potential measurements showed that after activation by ammonium oxalate,there was a shift in the zeta potential of pyrite to more negative values by adding xanthate.X-ray photoelectron spectroscopy test showed that after ammonium oxalate treatment,the O 1s content on the surface of pyrite decreased from 44.03%to 26.18%,and the S 2p content increased from 14.01%to 27.26%,which confirmed that the ammonium oxalatetreated pyrite surface was more hydrophobic than the untreated surface.Therefore,ammonium oxalate may be used as a selective activator of pyrite in the lime system,which achieves an efficient flotation separation of S-As sulfide ores under high alkalinity and high Ca2+concentration conditions.

A review on the high energy oxidizer ammonium dinitramide:Its synthesis,thermal decomposition,hygroscopicity,and application in energetic materials

Ammonium dinitramide(ADN)is considered as a potential substitute for ammonium perchlorate in energetic materials due to its high density,positive oxygen balance,and halogen-free characteristics.However,its application has been severely limited because of its strong hygroscopicity,difficult storage,and incompatibility with isocyanate curing agents.In order to better bloom the advantages of the highly energetic and environment-friendly ADN in the fields of energetic materials,an in-depth analysis of the current situation and discussion of key research points are particularly important.In this paper,a detailed overview on the synthesis,thermal decomposition,hygroscopic mechanism,and antihygroscopicity of ADN has been discussed,its application in powdes and explosives are also presented,and its future research directions are proposed.

Adsorption characteristics of Pb(Ⅱ)ions on sulfidized hemimorphite surface under ammonium sulfate system

In this work,the effect of ammonium sulfate on the adsorption characteristics of low-concentration Pb(Ⅱ)ions on the sulfidized hemimorphite surface was comprehensively investigated.The results showed that ammonium sulfate could increase the maximum recovery of hemimorphite from 69.42%to 88.24%under a low concentration of Pb(Ⅱ)ions.On the hemimorphite surface pretreated with ammonium sulfate,the adsorption of Pb(Ⅱ)ions was enhanced and the main species of Pb adsorbed was changed from Pb―O/OH to PbS.This was due to the larger amount of ZnS providing more effective adsorption sites for Pb components to generate Pb S.Meanwhile,the intensity of ZnS decreased with the formation of PbS,demonstrating that ZnS was covered by PbS which formed later on the mineral surface.It was beneficial for the adsorption of butyl xanthate on the hemimorphite surface to form more hydrophobic substances.As a result,ammonium sulfate played a crucial role in realizing the efficient recovery of hemimorphite.

Solid-liquid phase equilibrium for the system ammonium polyphosphate-urea ammonium nitrate-potassium chloride-water at 273.2 K

Based on the dynamic method,a quaternary system of ammonium polyphosphate (APP)-urea ammonium nitrate (UAN,CO(NH_(2))_(2)-NH_(4)NO_(3))-potassium chloride (KCl)-H_(2)O and its subsystems (APP-[CO(NH_(2))_(2)-NH_(4)NO_(3)]-H_(2)O,KCl-[CO(NH_(2))_(2)-NH_(4)NO_(3)]-H_(2)O and APP-KCl-H_(2)O) were systematically investigated at the temperature of 273.2 K.Each ternary phase diagram contains one invariant point and three crystallization regions.The crystallization regions are:(1)(NH_(4))_(3)HP_(2)O_(7),(NH_(4))_(4)P_(2)O_(7)and ((NH_(4))_(3)HP_(2)O_(7)+(NH_(4))_(4)P_(2)O_(7)) for APP-[CO(NH_(2))_(2)-NH_(4)NO_(3)]-H_(2)O diagram;(2) KCl,KNO_(3)and(KCl+KNO_(3)) for KCl-[CO(NH_(2))_(2)-NH_(4)NO_(3)]-H_(2)O diagram and (3)(NH_(4))_(3)HP_(2)O_(7),KCl and((NH_(4))_(3)HP_(2)O_(7)+KCl) for APP-KCl-H_(2)O diagram.The quaternary phase diagram of APP-[CO(NH_(2))_(2)-NH_(4)NO_(3)]-KCl-H_(2)O has no quaternary invariant point but includes four solid phase crystallization regions,i.e.,(NH_(4))_(3)HP_(2)O_(7),(NH_(4))_(4)P_(2)O_(7),KNO_(3)and KCl,in which the KNO_(3)region occupies the largest area.The maximum total nutrient content (N+P_(2)O_(5)+K_(2)O) existing as ionic forms in the APP-[CO(NH_(2))_(2)-NH_(4)NO_(3)]-H_(2)O,KCl-[CO(NH_(2))_(2)-NH_(4)NO_(3)]-H_(2)O,APP-KCl-H_(2)O and quaternary systems is 44.70%,32.86%,45.56%and 46.23%(mass),respectively,indicating that the maximum nutrient content can be reached using raw materials of the corresponding systems to prepare liquid fertilizer.In the quaternary system,the content of NH_(4)~+-N ascends with the increase of the total nutrient content,while the contents of NO_(3)^(-)-N and CO(NH_(2))_(2)-N increase with elevated total N.This work can help optimize the operating parameters for the production,storage and transportation of liquid fertilizers.

Dimethylammonium cation stabilizes all-inorganic perovskite solar cells

Facing the poor environmental stability of traditional methylammonium or formamidinium-based lead halide per-ovskites,scientists turn their attention to inorganic lead hal-ide perovskites(ILHPs)with narrow bandgaps,excellent thermal stability and reduced ion migration compared to their organic/inorganic counterparts[1−4].Up to now,the PCEs for ILHP solar cells exceed 21%[5].Especially,the preferred black ILHP(e.g.CsPbI3)with the smallest bandgap of~1.7 eV and single-halide composition for avoiding phase separation is crucial for high-performance single-junction solar cells and can be applied in tandem devices as the top cells[6,7].However,small Cs+(167 pm)in CsPbI3 with a tolerance factor close to 0.8 is unsuitable for the 3D PbI3-framework[8].The mis-matched size of cations will induce lattice strain and the per-ovskite spontaneously transforms to undesired non-photoact-ive yellow phase(δ-phase,like NH4CdCl3)(Fig.1(a))[9,10].There-fore,improving lattice symmetry and reducing lattice strain are the strategies for inhibiting the phase transition of ILHPs.

Studies on ammonium dinitramide and 3,4-diaminofurazan cocrystal for tuning the hygroscopicity

Ammonium dinitramide(ADN)is a promising oxidizer with high energy characteristic,which is a relatively new environmentally friendly oxidizer without halogens and carbon elements.However,ADN has high hygroscopicity when exposed to high humidity air,restricting its applications on the solid propellants.In this paper,a novel energetic cocrystal composed of ammonium dinitramide and 3,4-diaminofurazan(DAF)was proposed and successfully synthesized by antisolvent crystallization method,and the properties of the cocrystal were systematically investigated by analytical characterization and theoretical simulation calculations.The formation of the cocrystal was confirmed by powder X-ray diffraction,differential scanning calorimetry,scanning electron microscopy,infrared spectroscopy and Raman spectroscopy,indicating that the synthesized product was a cocrystal.Through theoretical studies,the ADN/DAF cocrystal structure was predicted,and the powder X-ray diffraction,morphology,water sorption capacity of ADN/DAF cocrystal were calculated,which was consistent with experimental phenomena.The results showed that newly prepared cocrystal of ADN/DAF had lower hygroscopicity compared to pure ADN,and the water sorption capacity was reduced from 15.35%to 7.90%.This may be due to the formation of N-H…O medium-strength hydrogen bonds between the ammonium ion of ADN and the O atom of DAF in the cocrystal,which prevents the binding of water molecules in the air and ammonium ions and reduces the probability of ADN binding to water molecules,leading to the reduction of cocrystal hygroscopicity.The newly prepared energetic cocrystal can provide theoretical and technical guidance for the study of the anti-hygroscopicity of ADN and advance the practical application of ADN.

Wettability alteration of organo-vermiculites induced by layer charge and tailored bis-N-heterocyclic quaternary ammonium salts

Wettability is an important surface property that deserves to further explore the factors on its alteration.Series of bis-N-heterocyclic quaternary ammonium salts with different spacer length and N-heterocyclic headgroups(morpholinium(BMMB,BMMD and BMMH),piperidinium(BPMH)and piperazinium(BMPMH))have been synthesized and employed for altering the wettability of vermiculite and its derivates(Vts)treated by Li^(+)-saturated heating method.The results of X-ray diffraction(XRD),Fourier transform infrared spectroscopy(FT-IR),thermogravimetric analysis(TG-DTG),scanning electron microscopy(SEM)and N_(2)adsorption/desorption isotherms indicate that all of the bis-N-heterocyclic quaternary ammonium salts have been successfully inserted into the vermiculite layers,leading to the organic monolayer.The results of capillary rise tests combined with Lipophilic to Hydrophilic Ratio(LHR)values unveil the wettability alteration of the organo-Vts.As the layer charge decreases,the hydrophilicity of the organo-Vts gradually increases,which is probably caused by the decline in binding sites.As the result of the change in spacer length of modifier,the wetting properties of morpholinium-based organo-Vts change in order of BMMD-Vts>BMMH-Vts>BMMB-Vts,and difference in N-heterocyclic headgroups leads to the sequence of wettability:BMPMH-Vts>BPMH-Vts>BMMH-Vts.Layer charge of Vt,spacer length and the type of the N-heterocyclic headgroup of modifier have the synergistic effect on the regulation of the wettability.

Fabrication of alginate-based microspheres with cellular structure for tuning ammonium dinitramide performance

Recently,an emerging category green of energetic material ammonium dinitramide(ADN)has exhibited promising application in propellants due to its outstanding merits in energy release and environmental friendliness.It can be considered to substitute traditional oxidizer of ammonium perchlorate(AP)in military systems and aerospace.In this paper,a novel spherical energetic composite ADN/copper alginate(CA)with a microporous structure was designed and prepared by the W/O gel emulsion method,and a desirable porous microsphere structure was obtained.Multiple characterization techniques were used to investigate the structure and properties of ADN/CA composites.The results showed that ADN crystals were homogeneously encapsulated in an alginate-gel matrix.Thermal decomposition temperature was reduced to 151.7℃compared to ADN,while the activation energy of them was reduced from 129.73 k J/mol(ADN)to 107.50 k J/mol(ADN/CA-4).In addition,as-prepared samples had lower impact and frictional sensitivity than ADN.The mechanism of sensitivity reduction and decomposition are also discussed.Constant-volume combustion tests show that peak pressure of the ADN/CA-4 achieves 253.4 k Pa and pressurization rate of 2750.4 k Pa/s.Hence,this has a promising application in improving the combustion performance and safety performance of solid propellants.

Effect of ammonium sulfate on the formation of zinc sulfide species on hemimorphite surface and its role in sulfidation flotation

Effectively strengthening the surface sulfidation is essential for recovering hemimorphite by froth flotation.In this work,inductively coupled plasma optical emission spectrometer(ICP-OES)measurements,Visual MINTEQ calculation,X-ray photoelectron spectroscopy(XPS)analysis,time of flight secondary ion mass spectrometry(ToF-SIMS)analysis,and micro-flotation experiments were explored to systematically investigate the effect of ammonium sulfate((NH_(4))_(2)SO_(4))on the formation of zinc sulfide species on hemimorphite surface and its role in sulfidation flotation.The results showed that(NH_(4))_(2)SO_(4)exhibited a positive influence on hemimorphite sulfidation flotation.It was ascribed to the number of zinc components in the form of Zn^(2+)and[Zn(NH_(3))_(i)]^(2+)(i=1–4)increased in the flotation system after hemimorphite treatment with(NH_(4))_(2)SO_(4),which was beneficial to its interaction with sulfur species in solution,resulting in a dense and stable zinc sulfide layer generated on the hemimorphite surface.[Zn(NH_(3))_(i)]^(2+)participated in the sulfidation reaction of hemimorphite as a transition state.In addition the sulfidation reaction of hemimorphite was accelerated by(NH_(4))_(2)SO_(4).Thus,(NH_(4))_(2)SO_(4)presents a vital role in promoting the sulfidation of hemimorphite.